Hallo,
ich bin gerade dabei einen neuen VDR zusammen zu bauen. Leider versuche ich erfolglos eine TT S2-4100 in Betrieb zu nehmen.
Als erstes habe ich versucht den original TT-Treiber zu installieren. Das hat prinzipiell auch geklappt und die Karte wurde gefunden und funktionierte. Leider hat es dadurch aber die LIRC-Module zerschossen (die werden scheinbar vom TT-Treiber nicht richtig gebaut oder installiert), so dass keine FB mehr funktionierte.
Darum habe ich dann einen Kernel (3.16.4) selbst compiliert und dabei die media/DVB-Komponenten deaktiviert.
Im Anschluss habe ich den aktuellen media_build_experimanetal Treiber geladen/erzeugt/installiert und neu gebootet.
Lirc funktioniert zwar damit, aber die DVB-Karte wird nicht gefunden. Sie taucht im im dmesg überhaupt nicht aut.
Ein Laden des Moduls saa716x_budget (was ja für die Karte ist) bringt leider nichts. Aber zumindest auch keinen Fehler, was ja bedeutet dass das Modul vom Treiber gebaut und installiert wurde.
Woran könnte es denn lieben das die Karte gar nicht initialisiert und in dmesg auftaucht? Welcher Treiber ist denn für die S2-4100 aktuell zu bevorzugen? Ich habe ja nicht nur die S2-4100 drin und benötige daher auch TT-fremde Kernelmodule.
Anbei mal die Ausgaben (gekürzt) von dmesg und lspci.
dmesg:
[ 1.508045] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.508048] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.508181] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.508456] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.508502] sd 2:0:0:0: [sda] Write Protect is off
[ 1.508503] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.508522] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.508523] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 1.508555] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.529406] sda: sda1 sda2 < sda5 sda6 >
[ 1.529766] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.100037] usb 3-1: new low-speed USB device number 3 using uhci_hcd
[ 2.276078] usb 3-1: New USB device found, idVendor=046d, idProduct=c002
[ 2.276081] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.276084] usb 3-1: Product: USB-PS/2 Mouse M-BA47
[ 2.276086] usb 3-1: Manufacturer: Logitech
[ 2.294375] input: Logitech USB-PS/2 Mouse M-BA47 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/0003:046D:C002.0002/input/input2
[ 2.294449] hid-generic 0003:046D:C002.0002: input,hidraw0: USB HID v1.00 Mouse [Logitech USB-PS/2 Mouse M-BA47] on usb-0000:00:1d.0-1/input0
[ 2.364071] Switched to clocksource tsc
[ 2.532019] usb 4-1: new low-speed USB device number 3 using uhci_hcd
[ 2.720089] usb 4-1: New USB device found, idVendor=046a, idProduct=0011
[ 2.720092] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.762357] input: HID 046a:0011 as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046A:0011.0003/input/input3
[ 2.762404] hid-generic 0003:046A:0011.0003: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:1d.1-1/input0
[ 3.448029] floppy0: no floppy controllers found
[ 3.489203] PM: Starting manual resume from disk
[ 3.489207] PM: Hibernation image partition 8:5 present
[ 3.489208] PM: Looking for hibernation image.
[ 3.489366] PM: Image not found (code -22)
[ 3.489369] PM: Hibernation image not present or could not be loaded.
[ 3.516986] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.661073] systemd-default-display-manager-generator[133]: /etc/X11/default-display-manager point at slim while the default systemd unit is lightdm.service. Reconfiguring slim as default.
[ 4.777882] systemd-gpt-auto-generator[134]: Failed to determine partition table type of /dev/sda: Input/output error
[ 4.778066] systemd[129]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with error code 1.
[ 4.868340] random: nonblocking pool is initialized
[ 5.810575] fuse init (API version 7.23)
[ 6.528124] systemd-udevd[177]: starting version 215
[ 7.557729] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 7.557734] ACPI: Power Button [PWRB]
[ 7.557783] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.557785] ACPI: Power Button [PWRF]
[ 7.590709] Floppy drive(s): fd0 is 1.44M
[ 7.781846] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.804076] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.907774] parport_pc 00:03: reported by Plug and Play ACPI
[ 7.907870] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 7.996566] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 8.043427] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 8.116645] [drm] Initialized drm 1.1.0 20060810
[ 8.163357] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20140424/utaddress-258)
[ 8.163363] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.163386] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.222689] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 8.245872] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.310278] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 8.310281] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.310283] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.310284] sound hdaudioC0D0: mono: mono_out=0x0
[ 8.310286] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 8.310287] sound hdaudioC0D0: inputs:
[ 8.310289] sound hdaudioC0D0: Front Mic=0x19
[ 8.310290] sound hdaudioC0D0: Rear Mic=0x18
[ 8.310292] sound hdaudioC0D0: Line=0x1a
[ 8.321939] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.321999] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.322055] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.322110] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.322166] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.322219] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.322273] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.322327] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 8.357777] ppdev: user-space parallel port driver
[ 8.385615] iTCO_vendor_support: vendor-support=0
[ 8.418167] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.418202] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
[ 8.418440] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.884250] nvidia: module license 'NVIDIA' taints kernel.
[ 8.884253] Disabling lock debugging due to kernel taint
[ 8.900547] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 8.900801] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 8.900807] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.65 Tue Dec 2 09:50:34 PST 2014
[ 9.507758] Adding 1998844k swap on /dev/sda5. Priority:-1 extents:1 across:1998844k FS
[ 10.140334] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 10.147468] systemd-journald[149]: Received request to flush runtime journal from PID 1
[ 10.608027] floppy0: no floppy controllers found
[ 10.780816] r8169 0000:04:02.0 eth0: link down
[ 10.780824] r8169 0000:04:02.0 eth0: link down
[ 10.780844] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.419621] RPC: Registered named UNIX socket transport module.
[ 11.419624] RPC: Registered udp transport module.
[ 11.419625] RPC: Registered tcp transport module.
[ 11.419626] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.455176] FS-Cache: Loaded
[ 11.484806] FS-Cache: Netfs 'nfs' registered for caching
[ 11.536965] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 12.429227] WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
dd0a6fe2bc3055cd61e369f97982c88183b1f0a0 [media] dvb-usb-dvbsky: fix i2c adapter for sp2 device
b6851419409664bc564ce5148bbec1141944c710 [media] m88ds3103: change ts clock config for serial mode
c29d6a83b3c14cf81a4c90a941eb923625192398 [media] cx23885: add DVBSky S952 support
experimental: 1969cdc5388b711e2aef3d1747b5f7dd1cd965f3 experimental/ddbridge: Fix 'inlining failed in call to always_inline ...: recursive inlining'.
v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
[ 12.437285] lirc_dev: IR Remote Control driver registered, major 249
[ 13.352012] lirc_serial lirc_serial.0: auto-detected active low receiver
[ 13.352101] lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0
[ 13.977225] r8169 0000:04:02.0 eth0: link up
[ 13.977234] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.414004] Guest personality initialized and is inactive
[ 14.414044] VMCI host device registered (name=vmci, major=10, minor=59)
[ 14.414045] Initialized host personality
[ 14.984219] NET: Registered protocol family 40
[ 21.285660] nvidia 0000:01:00.0: irq 44 for MSI/MSI-X
[ 35.576952] media: Linux media interface: v0.10
[ 35.594302] Linux video capture interface: v2.00
[ 35.594305] WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
dd0a6fe2bc3055cd61e369f97982c88183b1f0a0 [media] dvb-usb-dvbsky: fix i2c adapter for sp2 device
b6851419409664bc564ce5148bbec1141944c710 [media] m88ds3103: change ts clock config for serial mode
c29d6a83b3c14cf81a4c90a941eb923625192398 [media] cx23885: add DVBSky S952 support
experimental: 1969cdc5388b711e2aef3d1747b5f7dd1cd965f3 experimental/ddbridge: Fix 'inlining failed in call to always_inline ...: recursive inlining'.
v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
[ 35.616603] WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
dd0a6fe2bc3055cd61e369f97982c88183b1f0a0 [media] dvb-usb-dvbsky: fix i2c adapter for sp2 device
b6851419409664bc564ce5148bbec1141944c710 [media] m88ds3103: change ts clock config for serial mode
c29d6a83b3c14cf81a4c90a941eb923625192398 [media] cx23885: add DVBSky S952 support
experimental: 1969cdc5388b711e2aef3d1747b5f7dd1cd965f3 experimental/ddbridge: Fix 'inlining failed in call to always_inline ...: recursive inlining'.
v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
[ 35.658331] saa7146: register extension 'av7110'
Alles anzeigen
lspi:
02:00.0 Multimedia controller: Philips Semiconductors SAA7160 (rev 03)
Subsystem: Technotrend Systemtechnik GmbH Device 3010
Physical Slot: 0
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fe900000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [40] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [50] Express Endpoint, MSI 00
Capabilities: [74] Power Management version 2
Capabilities: [80] Vendor Specific Information: Len=50 <?>
Tschau, Uwe.