SCR Konfiguration, bin überfordert

Snorre · 17. November 2014

Zitat von wirbel
Wenn du den wiki Artikel wirklich gelesen hättest, wäre dir das hier aufgefallen.

Das ergibt z.B. für je 10 msec Wartezeit
Code
t V W10 (..) W10 v
während du das hier verwendest:
Code
t v W10 (..) W10 v

Hallo wirbel.

Danke für den Hinweis.
Dieses Detail ist mir durchgerutscht.
Ich war mir sicher, dass dies den Durchbruch bringt und habe es gestern gleich ausprobiert.
Doch leider kein Unterschied zur 13V-diseqc.conf.

Ich werde nun vesuchen 2 SCR-fähige Konsumer-Receiver auszuleihen und an der Anlage zu betreiben.
Wenn dies funktioniert, kann ich einen Schaden an LNB bzw. Dosen oder Splitter ausschliessen.
Dann muss wohl meine VDR-Hardware Mucken machen.

Eventuell könnte es hilfreich für mich sein wenn andere SCR-User mal mitteilen würden, welche DVB-Empfänger
sie erfolgrecih im Einsatz haben.

Der Vollständigkeit halber hier noch die logs meiner gestrigen Versuche:

Diseqc.conf 13V:

Code

WZ-VDR> more scr.conf
# DUR-LINE, Inverto Black
#0 1210
#1 1420
2 1680
3 2040
WZ-VDR> more diseqc.conf
# SCR 13V (Unicable)
S19.2E  11700 V  9750  t v W10 S0 [E0 10 5A 00 00] W10 v
S19.2E  99999 V 10600  t v W10 S1 [E0 10 5A 00 00] W10 v
S19.2E  11700 H  9750  t v W10 S2 [E0 10 5A 00 00] W10 v
S19.2E  99999 H 10600  t v W10 S3 [E0 10 5A 00 00] W10 v
S13.0E  11700 V  9750  t v W10 S4 [E0 10 5A 00 00] W10 v
S13.0E  99999 V 10600  t v W10 S5 [E0 10 5A 00 00] W10 v
S13.0E  11700 H  9750  t v W10 S6 [E0 10 5A 00 00] W10 v
S13.0E  99999 H 10600  t v W10 S7 [E0 10 5A 00 00] W10 v
WZ-VDR> tail -f /var/log/messages
Nov 16 14:16:20 (MLD) user.debug vdr: [16225] tuner on frontend 1/0 thread ended (pid=16216, tid=16225)
Nov 16 14:16:20 (MLD) user.info vdr: [16216] deleting plugin: setup
Nov 16 14:16:20 (MLD) user.info vdr: [16216] deleting plugin: osdteletext
Nov 16 14:16:20 (MLD) user.info vdr: [16216] deleting plugin: opkg
Nov 16 14:16:20 (MLD) user.info vdr: [16216] deleting plugin: femon
Nov 16 14:16:20 (MLD) user.info vdr: [16216] deleting plugin: extrecmenu
Nov 16 14:16:20 (MLD) user.info vdr: [16216] deleting plugin: dvbsddevice
Nov 16 14:16:22 (MLD) user.debug vdr: [16216] max. latency time 1 seconds
Nov 16 14:16:22 (MLD) user.info vdr: [16216] caught signal 15
Nov 16 14:16:22 (MLD) user.info vdr: [16216] exiting, exit code 0
Nov 16 14:20:03 (MLD) user.info vdr: [19300] VDR version 2.1.6 started
Nov 16 14:20:03 (MLD) user.info vdr: [19300] switched to user 'root'
Nov 16 14:20:03 (MLD) user.info vdr: [19300] codeset is 'UTF-8' - known
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] found 28 locales in /usr/share/locale
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading plugin: /usr/lib/vdr/libvdr-dvbsddevice.so.2.1.6
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading plugin: /usr/lib/vdr/libvdr-extrecmenu.so.2.1.6
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading plugin: /usr/lib/vdr/libvdr-femon.so.2.1.6
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading plugin: /usr/lib/vdr/libvdr-opkg.so.2.1.6
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading plugin: /usr/lib/vdr/libvdr-osdteletext.so.2.1.6
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading plugin: /usr/lib/vdr/libvdr-setup.so.2.1.6
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading /etc/vdr/setup.conf
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading /etc/vdr/sources.conf
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading /etc/vdr/diseqc.conf
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading /etc/vdr/scr.conf
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading /etc/vdr/channels.conf
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading /etc/vdr/timers.conf
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading /etc/vdr/reccmds.conf
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading /etc/vdr/svdrphosts.conf
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading /etc/vdr/remote.conf
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading /etc/vdr/keymacros.conf
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] registered source parameters for 'A - ATSC'
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] registered source parameters for 'C - DVB-C'
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] registered source parameters for 'S - DVB-S'
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] registered source parameters for 'T - DVB-T'
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] probing /dev/dvb/adapter0/frontend0
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] creating cDvbSdFfDevice
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] new device number 1
Nov 16 14:20:03 (MLD) user.debug vdr: [19303] epg data reader thread started (pid=19300, tid=19303, prio=high)
Nov 16 14:20:03 (MLD) user.debug vdr: [19303] reading EPG data from /var/cache/vdr/epg.data
Nov 16 14:20:03 (MLD) user.debug vdr: [19302] video directory scanner thread started (pid=19300, tid=19302, prio=high)
Nov 16 14:20:03 (MLD) user.debug vdr: [19302] video directory scanner thread ended (pid=19300, tid=19302)
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] cTimeMs: using monotonic clock (resolution is 1000000 ns)
Nov 16 14:20:03 (MLD) user.debug vdr: [19301] video directory scanner thread started (pid=19300, tid=19301, prio=high)
Nov 16 14:20:03 (MLD) user.debug vdr: [19305] CI adapter on device 0 thread started (pid=19300, tid=19305, prio=high)
Nov 16 14:20:03 (MLD) user.debug vdr: [19301] video directory scanner thread ended (pid=19300, tid=19301)
Nov 16 14:20:03 (MLD) user.info vdr: [19300] DVB API version is 0x050A (VDR was built with 0x050A)
Nov 16 14:20:03 (MLD) user.info vdr: [19300] frontend 0/0 provides DVB-S with QPSK ("VLSI VES1x93 DVB-S")
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] probing /dev/dvb/adapter1/frontend0
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] creating cDvbDevice
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] new device number 2
Nov 16 14:20:03 (MLD) user.debug vdr: [19307] section handler thread started (pid=19300, tid=19307, prio=low)
Nov 16 14:20:03 (MLD) user.debug vdr: [19306] tuner on frontend 0/0 thread started (pid=19300, tid=19306, prio=high)
Nov 16 14:20:03 (MLD) user.info vdr: [19300] frontend 1/0 provides DVB-S with QPSK ("ST STV0299 DVB-S")
Nov 16 14:20:03 (MLD) user.info vdr: [19300] found 2 DVB devices
Nov 16 14:20:03 (MLD) user.info vdr: [19300] initializing plugin: dvbsddevice (2.1.2): SD Full Featured DVB device
Nov 16 14:20:03 (MLD) user.info vdr: [19300] initializing plugin: extrecmenu (1.2.4): Erweitertes Aufzeichnungs-Menü
Nov 16 14:20:03 (MLD) user.info vdr: [19300] initializing plugin: femon (2.1.1-GIT-0-138-gc4c0a8a): DVB Signal Informationsanzeige (OSD)
Nov 16 14:20:03 (MLD) user.info vdr: [19300] initializing plugin: opkg (0.1.0): Pakete verwalten
Nov 16 14:20:03 (MLD) user.info vdr: [19300] initializing plugin: osdteletext (0.9.4): Zeigt den Videotext auf dem OSD an
Nov 16 14:20:03 (MLD) user.info vdr: [19300] initializing plugin: setup (0.3.1-zulu-edition): System Setup
Nov 16 14:20:03 (MLD) user.info vdr: [19300] setting primary device to 1
Nov 16 14:20:03 (MLD) user.debug vdr: [19310] section handler thread started (pid=19300, tid=19310, prio=low)
Nov 16 14:20:03 (MLD) user.debug vdr: [19309] tuner on frontend 1/0 thread started (pid=19300, tid=19309, prio=high)
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] assuming manual start of VDR
Nov 16 14:20:03 (MLD) user.info vdr: [19300] SVDRP listening on port 6419
Nov 16 14:20:03 (MLD) user.info vdr: [19300] setting current skin to "sttng"
Nov 16 14:20:03 (MLD) user.info vdr: [19300] loading /etc/vdr/themes/sttng-default.theme
Nov 16 14:20:03 (MLD) user.info vdr: [19300] starting plugin: dvbsddevice
Nov 16 14:20:03 (MLD) user.info vdr: [19300] starting plugin: extrecmenu
Nov 16 14:20:03 (MLD) user.info vdr: [19300] starting plugin: femon
Nov 16 14:20:03 (MLD) user.info vdr: [19300] starting plugin: opkg
Nov 16 14:20:03 (MLD) user.info vdr: [19300] starting plugin: osdteletext
Nov 16 14:20:03 (MLD) user.info vdr: [19300] starting plugin: setup
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] remote control LIRC - keys known
Nov 16 14:20:03 (MLD) user.debug vdr: [19300] remote control KBD - keys known
Nov 16 14:20:03 (MLD) user.debug vdr: [19313] KBD remote control thread started (pid=19300, tid=19313, prio=high)
Nov 16 14:20:03 (MLD) user.debug vdr: [19311] extrecmenu worker thread thread started (pid=19300, tid=19311, prio=high)
Nov 16 14:20:03 (MLD) user.debug vdr: [19312] LIRC remote control thread started (pid=19300, tid=19312, prio=high)
Nov 16 14:20:04 (MLD) user.debug vdr: [19303] epg data reader thread ended (pid=19300, tid=19303)
Nov 16 14:20:05 (MLD) user.info vdr: [19300] switching to channel 2
Nov 16 14:20:05 (MLD) user.debug vdr: [19300] creating directory /tmp/vtx/S19.2E-1-1079-28006
Nov 16 14:20:05 (MLD) user.debug vdr: [19323] receiver on device 1 thread started (pid=19300, tid=19323, prio=high)
Nov 16 14:20:05 (MLD) user.debug vdr: [19322] osdteletext-receiver thread started (pid=19300, tid=19322, prio=high)
Nov 16 14:20:05 (MLD) user.debug vdr: [19324] TS buffer on device 1 thread started (pid=19300, tid=19324, prio=high)
Nov 16 14:20:05 (MLD) user.debug vdr: [19300] setting watchdog timer to 60 seconds
Nov 16 14:20:05 (MLD) user.debug vdr: [19306] SCR 2 assigned to device 1
Nov 16 14:20:05 (MLD) user.debug vdr: [19300] OSD size changed to 720x576 @ 1,42222
Nov 16 14:20:05 (MLD) user.info vdr: [19305] CAM 1: no module present
Nov 16 14:20:05 (MLD) user.info vdr: [19305] CAM 2: no module present
Nov 16 14:20:06 (MLD) user.debug vdr: [19300] max. latency time 1 seconds
Nov 16 14:20:06 (MLD) user.info vdr: [19300] connect from 127.0.0.1, port 46315 - accepted
Nov 16 14:20:06 (MLD) user.info vdr: [19300] closing SVDRP connection
Nov 16 14:20:14 (MLD) user.info vdr: [19306] frontend 0/0 timed out while tuning to channel 2, tp 111954
Nov 16 14:20:26 (MLD) user.debug vdr: [19352] femon osd thread started (pid=19300, tid=19352, prio=high)
Nov 16 14:20:26 (MLD) user.debug vdr: [19351] femon receiver thread started (pid=19300, tid=19351, prio=high)
Nov 16 14:20:32 (MLD) user.debug vdr: [19322] osdteletext-receiver thread ended (pid=19300, tid=19322)
Nov 16 14:20:32 (MLD) user.debug vdr: [19300] buffer stats: 0 (0%) used
Nov 16 14:20:32 (MLD) user.info vdr: [19300] switching to channel 2
Nov 16 14:20:32 (MLD) user.debug vdr: [19353] osdteletext-receiver thread started (pid=19300, tid=19353, prio=high)
Nov 16 14:20:32 (MLD) user.debug vdr: [19309] SCR 3 assigned to device 2
Nov 16 14:20:32 (MLD) user.debug vdr: [19351] femon receiver thread ended (pid=19300, tid=19351)
Nov 16 14:20:32 (MLD) user.debug vdr: [19354] femon receiver thread started (pid=19300, tid=19354, prio=high)
Nov 16 14:20:32 (MLD) user.debug vdr: [19355] receiver on device 2 thread started (pid=19300, tid=19355, prio=high)
Nov 16 14:20:32 (MLD) user.debug vdr: [19356] TS buffer on device 2 thread started (pid=19300, tid=19356, prio=high)
Nov 16 14:20:32 (MLD) user.debug vdr: [19353] osdteletext-receiver thread ended (pid=19300, tid=19353)
Nov 16 14:20:32 (MLD) user.debug vdr: [19300] buffer stats: 0 (0%) used
Nov 16 14:20:32 (MLD) user.debug vdr: [19357] osdteletext-receiver thread started (pid=19300, tid=19357, prio=high)
Nov 16 14:20:32 (MLD) user.debug vdr: [19354] femon receiver thread ended (pid=19300, tid=19354)
Nov 16 14:20:32 (MLD) user.debug vdr: [19358] femon receiver thread started (pid=19300, tid=19358, prio=high)
Nov 16 14:20:32 (MLD) user.debug vdr: [19324] TS buffer on device 1 thread ended (pid=19300, tid=19324)
Nov 16 14:20:32 (MLD) user.debug vdr: [19323] buffer stats: 376 (0%) used
Nov 16 14:20:32 (MLD) user.debug vdr: [19323] receiver on device 1 thread ended (pid=19300, tid=19323)
Nov 16 14:20:39 (MLD) user.info vdr: [19300] switching to channel 3
Nov 16 14:20:39 (MLD) user.debug vdr: [19357] osdteletext-receiver thread ended (pid=19300, tid=19357)
Nov 16 14:20:39 (MLD) user.debug vdr: [19300] buffer stats: 0 (0%) used
Nov 16 14:20:39 (MLD) user.debug vdr: [19300] creating directory /tmp/vtx/S19.2E-1-1079-28007
Nov 16 14:20:39 (MLD) user.debug vdr: [19360] receiver on device 1 thread started (pid=19300, tid=19360, prio=high)
Nov 16 14:20:39 (MLD) user.debug vdr: [19359] osdteletext-receiver thread started (pid=19300, tid=19359, prio=high)
Nov 16 14:20:39 (MLD) user.debug vdr: [19361] TS buffer on device 1 thread started (pid=19300, tid=19361, prio=high)
Nov 16 14:20:39 (MLD) user.debug vdr: [19358] femon receiver thread ended (pid=19300, tid=19358)
Nov 16 14:20:39 (MLD) user.debug vdr: [19362] femon receiver thread started (pid=19300, tid=19362, prio=high)
Nov 16 14:20:39 (MLD) user.debug vdr: [19356] TS buffer on device 2 thread ended (pid=19300, tid=19356)
Nov 16 14:20:39 (MLD) user.debug vdr: [19355] buffer stats: 85728 (1%) used
Nov 16 14:20:39 (MLD) user.debug vdr: [19355] receiver on device 2 thread ended (pid=19300, tid=19355)
Nov 16 14:20:41 (MLD) user.info vdr: [19300] switching to channel 4
Nov 16 14:20:41 (MLD) user.debug vdr: [19359] osdteletext-receiver thread ended (pid=19300, tid=19359)
Nov 16 14:20:41 (MLD) user.debug vdr: [19300] buffer stats: 0 (0%) used
Nov 16 14:20:41 (MLD) user.debug vdr: [19362] femon receiver thread ended (pid=19300, tid=19362)
Nov 16 14:20:41 (MLD) user.debug vdr: [19300] creating directory /tmp/vtx/S19.2E-1-1079-28008
Nov 16 14:20:41 (MLD) user.debug vdr: [19363] osdteletext-receiver thread started (pid=19300, tid=19363, prio=high)
Nov 16 14:20:41 (MLD) user.debug vdr: [19361] TS buffer on device 1 thread ended (pid=19300, tid=19361)
Nov 16 14:20:41 (MLD) user.debug vdr: [19360] buffer stats: 376 (0%) used
Nov 16 14:20:41 (MLD) user.debug vdr: [19360] receiver on device 1 thread ended (pid=19300, tid=19360)
Nov 16 14:20:41 (MLD) user.debug vdr: [19364] receiver on device 1 thread started (pid=19300, tid=19364, prio=high)
Nov 16 14:20:41 (MLD) user.debug vdr: [19365] femon receiver thread started (pid=19300, tid=19365, prio=high)
Nov 16 14:20:41 (MLD) user.debug vdr: [19366] TS buffer on device 1 thread started (pid=19300, tid=19366, prio=high)
Nov 16 14:20:42 (MLD) user.info vdr: [19306] frontend 0/0 timed out while tuning to channel 4, tp 111954
Nov 16 14:20:43 (MLD) user.info vdr: [19300] switching to channel 5
Nov 16 14:20:43 (MLD) user.debug vdr: [19363] osdteletext-receiver thread ended (pid=19300, tid=19363)
Nov 16 14:20:43 (MLD) user.debug vdr: [19300] buffer stats: 0 (0%) used
Nov 16 14:20:43 (MLD) user.debug vdr: [19300] creating directory /tmp/vtx/S19.2E-1-1051-28724
Nov 16 14:20:43 (MLD) user.debug vdr: [19368] osdteletext-receiver thread started (pid=19300, tid=19368, prio=high)
Nov 16 14:20:43 (MLD) user.debug vdr: [19367] receiver on device 2 thread started (pid=19300, tid=19367, prio=high)
Nov 16 14:20:43 (MLD) user.debug vdr: [19369] TS buffer on device 2 thread started (pid=19300, tid=19369, prio=high)
Nov 16 14:20:43 (MLD) user.debug vdr: [19365] femon receiver thread ended (pid=19300, tid=19365)
Nov 16 14:20:43 (MLD) user.debug vdr: [19370] femon receiver thread started (pid=19300, tid=19370, prio=high)
Nov 16 14:20:43 (MLD) user.debug vdr: [19366] TS buffer on device 1 thread ended (pid=19300, tid=19366)
Nov 16 14:20:43 (MLD) user.debug vdr: [19364] buffer stats: 376 (0%) used
Nov 16 14:20:43 (MLD) user.debug vdr: [19364] receiver on device 1 thread ended (pid=19300, tid=19364)
Nov 16 14:20:48 (MLD) user.info vdr: [19300] switching to channel 1
Nov 16 14:20:48 (MLD) user.debug vdr: [19368] osdteletext-receiver thread ended (pid=19300, tid=19368)
Nov 16 14:20:48 (MLD) user.debug vdr: [19300] buffer stats: 0 (0%) used
Nov 16 14:20:48 (MLD) user.debug vdr: [19300] creating directory /tmp/vtx/S19.2E-1-1101-28106
Nov 16 14:20:48 (MLD) user.debug vdr: [19372] receiver on device 1 thread started (pid=19300, tid=19372, prio=high)
Nov 16 14:20:48 (MLD) user.debug vdr: [19371] osdteletext-receiver thread started (pid=19300, tid=19371, prio=high)
Nov 16 14:20:48 (MLD) user.debug vdr: [19373] TS buffer on device 1 thread started (pid=19300, tid=19373, prio=high)
Nov 16 14:20:48 (MLD) user.debug vdr: [19370] femon receiver thread ended (pid=19300, tid=19370)
Nov 16 14:20:48 (MLD) user.debug vdr: [19374] femon receiver thread started (pid=19300, tid=19374, prio=high)
Nov 16 14:20:48 (MLD) user.debug vdr: [19369] TS buffer on device 2 thread ended (pid=19300, tid=19369)
Nov 16 14:20:48 (MLD) user.debug vdr: [19367] buffer stats: 80276 (1%) used
Nov 16 14:20:48 (MLD) user.debug vdr: [19367] receiver on device 2 thread ended (pid=19300, tid=19367)
Nov 16 14:20:54 (MLD) user.debug vdr: [19371] osdteletext-receiver thread ended (pid=19300, tid=19371)
Nov 16 14:20:54 (MLD) user.debug vdr: [19300] buffer stats: 0 (0%) used
Nov 16 14:20:54 (MLD) user.info vdr: [19300] switching to channel 1
Nov 16 14:20:54 (MLD) user.debug vdr: [19375] osdteletext-receiver thread started (pid=19300, tid=19375, prio=high)
Nov 16 14:20:54 (MLD) user.debug vdr: [19374] femon receiver thread ended (pid=19300, tid=19374)
Nov 16 14:20:54 (MLD) user.debug vdr: [19376] femon receiver thread started (pid=19300, tid=19376, prio=high)
Nov 16 14:20:55 (MLD) user.debug vdr: [19377] receiver on device 2 thread started (pid=19300, tid=19377, prio=high)
Nov 16 14:20:55 (MLD) user.debug vdr: [19378] TS buffer on device 2 thread started (pid=19300, tid=19378, prio=high)
Nov 16 14:20:55 (MLD) user.debug vdr: [19375] osdteletext-receiver thread ended (pid=19300, tid=19375)
Nov 16 14:20:55 (MLD) user.debug vdr: [19300] buffer stats: 0 (0%) used
Nov 16 14:20:55 (MLD) user.debug vdr: [19379] osdteletext-receiver thread started (pid=19300, tid=19379, prio=high)
Nov 16 14:20:55 (MLD) user.debug vdr: [19376] femon receiver thread ended (pid=19300, tid=19376)
Nov 16 14:20:55 (MLD) user.debug vdr: [19380] femon receiver thread started (pid=19300, tid=19380, prio=high)
Nov 16 14:20:55 (MLD) user.debug vdr: [19373] TS buffer on device 1 thread ended (pid=19300, tid=19373)
Nov 16 14:20:55 (MLD) user.debug vdr: [19372] buffer stats: 376 (0%) used
Nov 16 14:20:55 (MLD) user.debug vdr: [19372] receiver on device 1 thread ended (pid=19300, tid=19372)
Nov 16 14:20:57 (MLD) user.info vdr: [19306] frontend 0/0 timed out while tuning to channel 1, tp 111837
Nov 16 14:21:05 (MLD) user.info vdr: [19300] switching to channel 2
Nov 16 14:21:05 (MLD) user.debug vdr: [19379] osdteletext-receiver thread ended (pid=19300, tid=19379)
Nov 16 14:21:05 (MLD) user.debug vdr: [19300] buffer stats: 0 (0%) used
Nov 16 14:21:05 (MLD) user.debug vdr: [19382] receiver on device 1 thread started (pid=19300, tid=19382, prio=high)
Nov 16 14:21:05 (MLD) user.debug vdr: [19381] osdteletext-receiver thread started (pid=19300, tid=19381, prio=high)
Nov 16 14:21:05 (MLD) user.debug vdr: [19383] TS buffer on device 1 thread started (pid=19300, tid=19383, prio=high)
Nov 16 14:21:05 (MLD) user.debug vdr: [19380] femon receiver thread ended (pid=19300, tid=19380)
Nov 16 14:21:05 (MLD) user.debug vdr: [19384] femon receiver thread started (pid=19300, tid=19384, prio=high)
Nov 16 14:21:05 (MLD) user.debug vdr: [19378] TS buffer on device 2 thread ended (pid=19300, tid=19378)
Nov 16 14:21:05 (MLD) user.debug vdr: [19377] buffer stats: 106972 (2%) used
Nov 16 14:21:05 (MLD) user.debug vdr: [19377] receiver on device 2 thread ended (pid=19300, tid=19377)
Nov 16 14:21:09 (MLD) user.debug vdr: [19381] osdteletext-receiver thread ended (pid=19300, tid=19381)
Nov 16 14:21:09 (MLD) user.debug vdr: [19300] buffer stats: 0 (0%) used
Nov 16 14:21:09 (MLD) user.info vdr: [19300] switching to channel 2
Nov 16 14:21:09 (MLD) user.debug vdr: [19385] osdteletext-receiver thread started (pid=19300, tid=19385, prio=high)
Nov 16 14:21:09 (MLD) user.debug vdr: [19384] femon receiver thread ended (pid=19300, tid=19384)
Nov 16 14:21:09 (MLD) user.debug vdr: [19386] femon receiver thread started (pid=19300, tid=19386, prio=high)
Nov 16 14:21:09 (MLD) user.debug vdr: [19387] receiver on device 2 thread started (pid=19300, tid=19387, prio=high)
Nov 16 14:21:09 (MLD) user.debug vdr: [19388] TS buffer on device 2 thread started (pid=19300, tid=19388, prio=high)
Nov 16 14:21:09 (MLD) user.debug vdr: [19385] osdteletext-receiver thread ended (pid=19300, tid=19385)
Nov 16 14:21:09 (MLD) user.debug vdr: [19300] buffer stats: 0 (0%) used
Nov 16 14:21:09 (MLD) user.debug vdr: [19389] osdteletext-receiver thread started (pid=19300, tid=19389, prio=high)
Nov 16 14:21:09 (MLD) user.debug vdr: [19386] femon receiver thread ended (pid=19300, tid=19386)
Nov 16 14:21:09 (MLD) user.debug vdr: [19390] femon receiver thread started (pid=19300, tid=19390, prio=high)
Nov 16 14:21:10 (MLD) user.debug vdr: [19383] TS buffer on device 1 thread ended (pid=19300, tid=19383)
Nov 16 14:21:10 (MLD) user.debug vdr: [19382] buffer stats: 188 (0%) used
Nov 16 14:21:10 (MLD) user.debug vdr: [19382] receiver on device 1 thread ended (pid=19300, tid=19382)
Nov 16 14:21:14 (MLD) user.info vdr: [19306] frontend 0/0 timed out while tuning to channel 2, tp 111954
Nov 16 14:21:29 (MLD) user.info vdr: [19300] stopping plugin: setup
Nov 16 14:21:29 (MLD) user.info vdr: [19300] stopping plugin: osdteletext
Nov 16 14:21:29 (MLD) user.debug vdr: [19389] osdteletext-receiver thread ended (pid=19300, tid=19389)
Nov 16 14:21:29 (MLD) user.debug vdr: [19300] buffer stats: 0 (0%) used
Nov 16 14:21:29 (MLD) user.info vdr: [19300] stopping plugin: opkg
Nov 16 14:21:29 (MLD) user.info vdr: [19300] stopping plugin: femon
Nov 16 14:21:29 (MLD) user.info vdr: [19300] stopping plugin: extrecmenu
Nov 16 14:21:30 (MLD) user.debug vdr: [19311] extrecmenu worker thread thread ended (pid=19300, tid=19311)
Nov 16 14:21:30 (MLD) user.info vdr: [19300] stopping plugin: dvbsddevice
Nov 16 14:21:30 (MLD) user.debug vdr: [19352] femon osd thread ended (pid=19300, tid=19352)
Nov 16 14:21:30 (MLD) user.debug vdr: [19390] femon receiver thread ended (pid=19300, tid=19390)
Nov 16 14:21:30 (MLD) user.debug vdr: [19313] KBD remote control thread ended (pid=19300, tid=19313)
Nov 16 14:21:30 (MLD) user.info vdr: [19300] saved setup to /etc/vdr/setup.conf
Nov 16 14:21:30 (MLD) user.debug vdr: [19388] TS buffer on device 2 thread ended (pid=19300, tid=19388)
Nov 16 14:21:30 (MLD) user.debug vdr: [19387] buffer stats: 97008 (1%) used
Nov 16 14:21:30 (MLD) user.debug vdr: [19387] receiver on device 2 thread ended (pid=19300, tid=19387)
Nov 16 14:21:30 (MLD) user.debug vdr: [19307] section handler thread ended (pid=19300, tid=19307)
Nov 16 14:21:30 (MLD) user.debug vdr: [19306] tuner on frontend 0/0 thread ended (pid=19300, tid=19306)
Nov 16 14:21:30 (MLD) user.debug vdr: [19305] CI adapter on device 0 thread ended (pid=19300, tid=19305)
Nov 16 14:21:30 (MLD) user.debug vdr: [19310] section handler thread ended (pid=19300, tid=19310)
Nov 16 14:21:30 (MLD) user.debug vdr: [19309] tuner on frontend 1/0 thread ended (pid=19300, tid=19309)
Nov 16 14:21:30 (MLD) user.info vdr: [19300] deleting plugin: setup
Nov 16 14:21:30 (MLD) user.info vdr: [19300] deleting plugin: osdteletext
Nov 16 14:21:30 (MLD) user.info vdr: [19300] deleting plugin: opkg
Nov 16 14:21:30 (MLD) user.info vdr: [19300] deleting plugin: femon
Nov 16 14:21:30 (MLD) user.info vdr: [19300] deleting plugin: extrecmenu
Nov 16 14:21:30 (MLD) user.info vdr: [19300] deleting plugin: dvbsddevice
Nov 16 14:21:32 (MLD) user.debug vdr: [19300] max. latency time 1 seconds
Nov 16 14:21:32 (MLD) user.info vdr: [19300] caught signal 15
Nov 16 14:21:32 (MLD) user.info vdr: [19300] exiting, exit code 0

Alles anzeigen

und Diseqc.conf 18V

Code

WZ-VDR> more scr.conf
# DUR-LINE, Inverto Black
#0 1210
#1 1420
2 1680
3 2040
WZ-VDR> more diseqc.conf
# SCR 18V (Unicable)
S19.2E  11700 V  9750  t V W10 S0 [E0 10 5A 00 00] W10 v
S19.2E  99999 V 10600  t V W10 S1 [E0 10 5A 00 00] W10 v
S19.2E  11700 H  9750  t V W10 S2 [E0 10 5A 00 00] W10 v
S19.2E  99999 H 10600  t V W10 S3 [E0 10 5A 00 00] W10 v
S13.0E  11700 V  9750  t V W10 S4 [E0 10 5A 00 00] W10 v
S13.0E  99999 V 10600  t V W10 S5 [E0 10 5A 00 00] W10 v
S13.0E  11700 H  9750  t V W10 S6 [E0 10 5A 00 00] W10 v
S13.0E  99999 H 10600  t V W10 S7 [E0 10 5A 00 00] W10 v
WZ-VDR> tail -f /var/log/messages
Nov 16 14:04:05 (MLD) user.debug vdr: [13580] tuner on frontend 1/0 thread ended (pid=13571, tid=13580)
Nov 16 14:04:05 (MLD) user.info vdr: [13571] deleting plugin: setup
Nov 16 14:04:05 (MLD) user.info vdr: [13571] deleting plugin: osdteletext
Nov 16 14:04:05 (MLD) user.info vdr: [13571] deleting plugin: opkg
Nov 16 14:04:05 (MLD) user.info vdr: [13571] deleting plugin: femon
Nov 16 14:04:05 (MLD) user.info vdr: [13571] deleting plugin: extrecmenu
Nov 16 14:04:05 (MLD) user.info vdr: [13571] deleting plugin: dvbsddevice
Nov 16 14:04:07 (MLD) user.debug vdr: [13571] max. latency time 1 seconds
Nov 16 14:04:07 (MLD) user.info vdr: [13571] caught signal 15
Nov 16 14:04:07 (MLD) user.info vdr: [13571] exiting, exit code 0
Nov 16 14:04:51 (MLD) user.info vdr: [16216] VDR version 2.1.6 started
Nov 16 14:04:51 (MLD) user.info vdr: [16216] switched to user 'root'
Nov 16 14:04:51 (MLD) user.info vdr: [16216] codeset is 'UTF-8' - known
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] found 28 locales in /usr/share/locale
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading plugin: /usr/lib/vdr/libvdr-dvbsddevice.so.2.1.6
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading plugin: /usr/lib/vdr/libvdr-extrecmenu.so.2.1.6
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading plugin: /usr/lib/vdr/libvdr-femon.so.2.1.6
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading plugin: /usr/lib/vdr/libvdr-opkg.so.2.1.6
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading plugin: /usr/lib/vdr/libvdr-osdteletext.so.2.1.6
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading plugin: /usr/lib/vdr/libvdr-setup.so.2.1.6
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading /etc/vdr/setup.conf
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading /etc/vdr/sources.conf
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading /etc/vdr/diseqc.conf
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading /etc/vdr/scr.conf
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading /etc/vdr/channels.conf
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading /etc/vdr/timers.conf
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading /etc/vdr/reccmds.conf
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading /etc/vdr/svdrphosts.conf
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading /etc/vdr/remote.conf
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading /etc/vdr/keymacros.conf
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] registered source parameters for 'A - ATSC'
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] registered source parameters for 'C - DVB-C'
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] registered source parameters for 'S - DVB-S'
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] registered source parameters for 'T - DVB-T'
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] probing /dev/dvb/adapter0/frontend0
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] creating cDvbSdFfDevice
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] new device number 1
Nov 16 14:04:51 (MLD) user.debug vdr: [16219] epg data reader thread started (pid=16216, tid=16219, prio=high)
Nov 16 14:04:51 (MLD) user.debug vdr: [16219] reading EPG data from /var/cache/vdr/epg.data
Nov 16 14:04:51 (MLD) user.debug vdr: [16218] video directory scanner thread started (pid=16216, tid=16218, prio=high)
Nov 16 14:04:51 (MLD) user.debug vdr: [16218] video directory scanner thread ended (pid=16216, tid=16218)
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] cTimeMs: using monotonic clock (resolution is 1000000 ns)
Nov 16 14:04:51 (MLD) user.debug vdr: [16217] video directory scanner thread started (pid=16216, tid=16217, prio=high)
Nov 16 14:04:51 (MLD) user.debug vdr: [16221] CI adapter on device 0 thread started (pid=16216, tid=16221, prio=high)
Nov 16 14:04:51 (MLD) user.debug vdr: [16217] video directory scanner thread ended (pid=16216, tid=16217)
Nov 16 14:04:51 (MLD) user.info vdr: [16216] DVB API version is 0x050A (VDR was built with 0x050A)
Nov 16 14:04:51 (MLD) user.info vdr: [16216] frontend 0/0 provides DVB-S with QPSK ("VLSI VES1x93 DVB-S")
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] probing /dev/dvb/adapter1/frontend0
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] creating cDvbDevice
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] new device number 2
Nov 16 14:04:51 (MLD) user.debug vdr: [16223] section handler thread started (pid=16216, tid=16223, prio=low)
Nov 16 14:04:51 (MLD) user.debug vdr: [16222] tuner on frontend 0/0 thread started (pid=16216, tid=16222, prio=high)
Nov 16 14:04:51 (MLD) user.info vdr: [16216] frontend 1/0 provides DVB-S with QPSK ("ST STV0299 DVB-S")
Nov 16 14:04:51 (MLD) user.info vdr: [16216] found 2 DVB devices
Nov 16 14:04:51 (MLD) user.info vdr: [16216] initializing plugin: dvbsddevice (2.1.2): SD Full Featured DVB device
Nov 16 14:04:51 (MLD) user.info vdr: [16216] initializing plugin: extrecmenu (1.2.4): Erweitertes Aufzeichnungs-Menü
Nov 16 14:04:51 (MLD) user.info vdr: [16216] initializing plugin: femon (2.1.1-GIT-0-138-gc4c0a8a): DVB Signal Informationsanzeige (OSD)
Nov 16 14:04:51 (MLD) user.info vdr: [16216] initializing plugin: opkg (0.1.0): Pakete verwalten
Nov 16 14:04:51 (MLD) user.info vdr: [16216] initializing plugin: osdteletext (0.9.4): Zeigt den Videotext auf dem OSD an
Nov 16 14:04:51 (MLD) user.info vdr: [16216] initializing plugin: setup (0.3.1-zulu-edition): System Setup
Nov 16 14:04:51 (MLD) user.info vdr: [16216] setting primary device to 1
Nov 16 14:04:51 (MLD) user.debug vdr: [16226] section handler thread started (pid=16216, tid=16226, prio=low)
Nov 16 14:04:51 (MLD) user.debug vdr: [16225] tuner on frontend 1/0 thread started (pid=16216, tid=16225, prio=high)
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] assuming manual start of VDR
Nov 16 14:04:51 (MLD) user.info vdr: [16216] SVDRP listening on port 6419
Nov 16 14:04:51 (MLD) user.info vdr: [16216] setting current skin to "sttng"
Nov 16 14:04:51 (MLD) user.info vdr: [16216] loading /etc/vdr/themes/sttng-default.theme
Nov 16 14:04:51 (MLD) user.info vdr: [16216] starting plugin: dvbsddevice
Nov 16 14:04:51 (MLD) user.info vdr: [16216] starting plugin: extrecmenu
Nov 16 14:04:51 (MLD) user.info vdr: [16216] starting plugin: femon
Nov 16 14:04:51 (MLD) user.info vdr: [16216] starting plugin: opkg
Nov 16 14:04:51 (MLD) user.info vdr: [16216] starting plugin: osdteletext
Nov 16 14:04:51 (MLD) user.info vdr: [16216] starting plugin: setup
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] remote control LIRC - keys known
Nov 16 14:04:51 (MLD) user.debug vdr: [16216] remote control KBD - keys known
Nov 16 14:04:51 (MLD) user.debug vdr: [16227] extrecmenu worker thread thread started (pid=16216, tid=16227, prio=high)
Nov 16 14:04:51 (MLD) user.debug vdr: [16229] KBD remote control thread started (pid=16216, tid=16229, prio=high)
Nov 16 14:04:51 (MLD) user.debug vdr: [16228] LIRC remote control thread started (pid=16216, tid=16228, prio=high)
Nov 16 14:04:52 (MLD) user.debug vdr: [16219] epg data reader thread ended (pid=16216, tid=16219)
Nov 16 14:04:53 (MLD) user.info vdr: [16216] switching to channel 13
Nov 16 14:04:53 (MLD) user.debug vdr: [16216] creating directory /tmp/vtx/S19.2E-1-1089-12003
Nov 16 14:04:53 (MLD) user.debug vdr: [16239] receiver on device 1 thread started (pid=16216, tid=16239, prio=high)
Nov 16 14:04:53 (MLD) user.debug vdr: [16238] osdteletext-receiver thread started (pid=16216, tid=16238, prio=high)
Nov 16 14:04:53 (MLD) user.debug vdr: [16240] TS buffer on device 1 thread started (pid=16216, tid=16240, prio=high)
Nov 16 14:04:53 (MLD) user.debug vdr: [16216] setting watchdog timer to 60 seconds
Nov 16 14:04:53 (MLD) user.debug vdr: [16222] SCR 2 assigned to device 1
Nov 16 14:04:53 (MLD) user.debug vdr: [16216] OSD size changed to 720x576 @ 1,42222
Nov 16 14:04:53 (MLD) user.info vdr: [16221] CAM 1: no module present
Nov 16 14:04:53 (MLD) user.info vdr: [16221] CAM 2: no module present
Nov 16 14:04:54 (MLD) user.debug vdr: [16216] max. latency time 1 seconds
Nov 16 14:04:54 (MLD) user.info vdr: [16216] connect from 127.0.0.1, port 46311 - accepted
Nov 16 14:04:54 (MLD) user.info vdr: [16216] closing SVDRP connection
Nov 16 14:05:02 (MLD) user.info vdr: [16222] frontend 0/0 timed out while tuning to channel 13, tp 112188
Nov 16 14:06:07 (MLD) user.info vdr: [16222] frontend 0/0 timed out while tuning to channel 13, tp 112188
Nov 16 14:06:26 (MLD) user.info vdr: [16216] switching to channel 1
Nov 16 14:06:26 (MLD) user.debug vdr: [16238] osdteletext-receiver thread ended (pid=16216, tid=16238)
Nov 16 14:06:26 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:06:26 (MLD) user.debug vdr: [16216] creating directory /tmp/vtx/S19.2E-1-1101-28106
Nov 16 14:06:26 (MLD) user.debug vdr: [16266] osdteletext-receiver thread started (pid=16216, tid=16266, prio=high)
Nov 16 14:06:27 (MLD) user.debug vdr: [16240] TS buffer on device 1 thread ended (pid=16216, tid=16240)
Nov 16 14:06:27 (MLD) user.debug vdr: [16239] buffer stats: 376 (0%) used
Nov 16 14:06:27 (MLD) user.debug vdr: [16239] receiver on device 1 thread ended (pid=16216, tid=16239)
Nov 16 14:06:27 (MLD) user.debug vdr: [16267] receiver on device 1 thread started (pid=16216, tid=16267, prio=high)
Nov 16 14:06:27 (MLD) user.debug vdr: [16268] TS buffer on device 1 thread started (pid=16216, tid=16268, prio=high)
Nov 16 14:06:31 (MLD) user.info vdr: [16216] switching to channel 2
Nov 16 14:06:31 (MLD) user.debug vdr: [16266] osdteletext-receiver thread ended (pid=16216, tid=16266)
Nov 16 14:06:31 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:06:31 (MLD) user.debug vdr: [16216] creating directory /tmp/vtx/S19.2E-1-1079-28006
Nov 16 14:06:31 (MLD) user.debug vdr: [16269] osdteletext-receiver thread started (pid=16216, tid=16269, prio=high)
Nov 16 14:06:31 (MLD) user.debug vdr: [16268] TS buffer on device 1 thread ended (pid=16216, tid=16268)
Nov 16 14:06:31 (MLD) user.debug vdr: [16267] buffer stats: 188 (0%) used
Nov 16 14:06:31 (MLD) user.debug vdr: [16267] receiver on device 1 thread ended (pid=16216, tid=16267)
Nov 16 14:06:31 (MLD) user.debug vdr: [16270] receiver on device 1 thread started (pid=16216, tid=16270, prio=high)
Nov 16 14:06:31 (MLD) user.debug vdr: [16271] TS buffer on device 1 thread started (pid=16216, tid=16271, prio=high)
Nov 16 14:06:34 (MLD) user.info vdr: [16216] switching to channel 3
Nov 16 14:06:34 (MLD) user.debug vdr: [16269] osdteletext-receiver thread ended (pid=16216, tid=16269)
Nov 16 14:06:34 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:06:34 (MLD) user.debug vdr: [16271] TS buffer on device 1 thread ended (pid=16216, tid=16271)
Nov 16 14:06:34 (MLD) user.debug vdr: [16270] buffer stats: 376 (0%) used
Nov 16 14:06:34 (MLD) user.debug vdr: [16270] receiver on device 1 thread ended (pid=16216, tid=16270)
Nov 16 14:06:34 (MLD) user.debug vdr: [16216] creating directory /tmp/vtx/S19.2E-1-1079-28007
Nov 16 14:06:34 (MLD) user.debug vdr: [16273] receiver on device 1 thread started (pid=16216, tid=16273, prio=high)
Nov 16 14:06:34 (MLD) user.debug vdr: [16272] osdteletext-receiver thread started (pid=16216, tid=16272, prio=high)
Nov 16 14:06:34 (MLD) user.debug vdr: [16274] TS buffer on device 1 thread started (pid=16216, tid=16274, prio=high)
Nov 16 14:06:37 (MLD) user.info vdr: [16216] switching to channel 4
Nov 16 14:06:37 (MLD) user.debug vdr: [16272] osdteletext-receiver thread ended (pid=16216, tid=16272)
Nov 16 14:06:37 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:06:37 (MLD) user.debug vdr: [16216] creating directory /tmp/vtx/S19.2E-1-1079-28008
Nov 16 14:06:37 (MLD) user.debug vdr: [16275] osdteletext-receiver thread started (pid=16216, tid=16275, prio=high)
Nov 16 14:06:37 (MLD) user.debug vdr: [16274] TS buffer on device 1 thread ended (pid=16216, tid=16274)
Nov 16 14:06:37 (MLD) user.debug vdr: [16273] buffer stats: 188 (0%) used
Nov 16 14:06:37 (MLD) user.debug vdr: [16273] receiver on device 1 thread ended (pid=16216, tid=16273)
Nov 16 14:06:37 (MLD) user.debug vdr: [16276] receiver on device 1 thread started (pid=16216, tid=16276, prio=high)
Nov 16 14:06:37 (MLD) user.debug vdr: [16277] TS buffer on device 1 thread started (pid=16216, tid=16277, prio=high)
Nov 16 14:06:38 (MLD) user.info vdr: [16216] switching to channel 5
Nov 16 14:06:38 (MLD) user.debug vdr: [16275] osdteletext-receiver thread ended (pid=16216, tid=16275)
Nov 16 14:06:38 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:06:38 (MLD) user.debug vdr: [16216] creating directory /tmp/vtx/S19.2E-1-1051-28724
Nov 16 14:06:38 (MLD) user.debug vdr: [16278] osdteletext-receiver thread started (pid=16216, tid=16278, prio=high)
Nov 16 14:06:38 (MLD) user.debug vdr: [16277] TS buffer on device 1 thread ended (pid=16216, tid=16277)
Nov 16 14:06:38 (MLD) user.debug vdr: [16276] buffer stats: 188 (0%) used
Nov 16 14:06:38 (MLD) user.debug vdr: [16276] receiver on device 1 thread ended (pid=16216, tid=16276)
Nov 16 14:06:38 (MLD) user.debug vdr: [16279] receiver on device 1 thread started (pid=16216, tid=16279, prio=high)
Nov 16 14:06:38 (MLD) user.debug vdr: [16280] TS buffer on device 1 thread started (pid=16216, tid=16280, prio=high)
Nov 16 14:06:39 (MLD) user.info vdr: [16216] switching to channel 6
Nov 16 14:06:39 (MLD) user.debug vdr: [16278] osdteletext-receiver thread ended (pid=16216, tid=16278)
Nov 16 14:06:39 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:06:39 (MLD) user.debug vdr: [16216] creating directory /tmp/vtx/S19.2E-1-1051-28725
Nov 16 14:06:39 (MLD) user.debug vdr: [16281] osdteletext-receiver thread started (pid=16216, tid=16281, prio=high)
Nov 16 14:06:39 (MLD) user.debug vdr: [16280] TS buffer on device 1 thread ended (pid=16216, tid=16280)
Nov 16 14:06:39 (MLD) user.debug vdr: [16279] buffer stats: 0 (0%) used
Nov 16 14:06:39 (MLD) user.debug vdr: [16279] receiver on device 1 thread ended (pid=16216, tid=16279)
Nov 16 14:06:39 (MLD) user.debug vdr: [16282] receiver on device 1 thread started (pid=16216, tid=16282, prio=high)
Nov 16 14:06:39 (MLD) user.debug vdr: [16283] TS buffer on device 1 thread started (pid=16216, tid=16283, prio=high)
Nov 16 14:06:41 (MLD) user.info vdr: [16216] switching to channel 5
Nov 16 14:06:41 (MLD) user.debug vdr: [16281] osdteletext-receiver thread ended (pid=16216, tid=16281)
Nov 16 14:06:41 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:06:41 (MLD) user.debug vdr: [16284] osdteletext-receiver thread started (pid=16216, tid=16284, prio=high)
Nov 16 14:06:41 (MLD) user.debug vdr: [16283] TS buffer on device 1 thread ended (pid=16216, tid=16283)
Nov 16 14:06:41 (MLD) user.debug vdr: [16282] buffer stats: 0 (0%) used
Nov 16 14:06:41 (MLD) user.debug vdr: [16282] receiver on device 1 thread ended (pid=16216, tid=16282)
Nov 16 14:06:41 (MLD) user.debug vdr: [16285] receiver on device 1 thread started (pid=16216, tid=16285, prio=high)
Nov 16 14:06:41 (MLD) user.debug vdr: [16286] TS buffer on device 1 thread started (pid=16216, tid=16286, prio=high)
Nov 16 14:06:48 (MLD) user.info vdr: [16222] frontend 0/0 timed out while tuning to channel 5, tp 110743
Nov 16 14:06:49 (MLD) user.debug vdr: [16288] femon osd thread started (pid=16216, tid=16288, prio=high)
Nov 16 14:06:49 (MLD) user.debug vdr: [16287] femon receiver thread started (pid=16216, tid=16287, prio=high)
Nov 16 14:06:50 (MLD) user.debug vdr: [16284] osdteletext-receiver thread ended (pid=16216, tid=16284)
Nov 16 14:06:50 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:06:50 (MLD) user.info vdr: [16216] switching to channel 5
Nov 16 14:06:50 (MLD) user.debug vdr: [16289] osdteletext-receiver thread started (pid=16216, tid=16289, prio=high)
Nov 16 14:06:50 (MLD) user.debug vdr: [16225] SCR 3 assigned to device 2
Nov 16 14:06:51 (MLD) user.debug vdr: [16287] femon receiver thread ended (pid=16216, tid=16287)
Nov 16 14:06:51 (MLD) user.debug vdr: [16290] femon receiver thread started (pid=16216, tid=16290, prio=high)
Nov 16 14:06:51 (MLD) user.debug vdr: [16291] receiver on device 2 thread started (pid=16216, tid=16291, prio=high)
Nov 16 14:06:51 (MLD) user.debug vdr: [16292] TS buffer on device 2 thread started (pid=16216, tid=16292, prio=high)
Nov 16 14:06:51 (MLD) user.debug vdr: [16289] osdteletext-receiver thread ended (pid=16216, tid=16289)
Nov 16 14:06:51 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:06:51 (MLD) user.debug vdr: [16293] osdteletext-receiver thread started (pid=16216, tid=16293, prio=high)
Nov 16 14:06:51 (MLD) user.debug vdr: [16290] femon receiver thread ended (pid=16216, tid=16290)
Nov 16 14:06:51 (MLD) user.debug vdr: [16294] femon receiver thread started (pid=16216, tid=16294, prio=high)
Nov 16 14:06:51 (MLD) user.debug vdr: [16226] changing pids of channel 368 from 401+401=2:402=deu@3:0:0 to 501+501=2:502=deu@3:0:0
Nov 16 14:06:51 (MLD) user.debug vdr: [16286] TS buffer on device 1 thread ended (pid=16216, tid=16286)
Nov 16 14:06:51 (MLD) user.debug vdr: [16285] buffer stats: 188 (0%) used
Nov 16 14:06:51 (MLD) user.debug vdr: [16285] receiver on device 1 thread ended (pid=16216, tid=16285)
Nov 16 14:07:54 (MLD) user.info vdr: [16222] frontend 0/0 timed out while tuning to channel 5, tp 110743
Nov 16 14:08:05 (MLD) user.info vdr: [16216] switching to channel 1
Nov 16 14:08:06 (MLD) user.debug vdr: [16293] osdteletext-receiver thread ended (pid=16216, tid=16293)
Nov 16 14:08:06 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:08:06 (MLD) user.debug vdr: [16296] receiver on device 1 thread started (pid=16216, tid=16296, prio=high)
Nov 16 14:08:06 (MLD) user.debug vdr: [16295] osdteletext-receiver thread started (pid=16216, tid=16295, prio=high)
Nov 16 14:08:06 (MLD) user.debug vdr: [16297] TS buffer on device 1 thread started (pid=16216, tid=16297, prio=high)
Nov 16 14:08:06 (MLD) user.debug vdr: [16294] femon receiver thread ended (pid=16216, tid=16294)
Nov 16 14:08:06 (MLD) user.debug vdr: [16298] femon receiver thread started (pid=16216, tid=16298, prio=high)
Nov 16 14:08:06 (MLD) user.debug vdr: [16292] TS buffer on device 2 thread ended (pid=16216, tid=16292)
Nov 16 14:08:06 (MLD) user.debug vdr: [16291] buffer stats: 142692 (2%) used
Nov 16 14:08:06 (MLD) user.debug vdr: [16291] receiver on device 2 thread ended (pid=16216, tid=16291)
Nov 16 14:08:13 (MLD) user.debug vdr: [16226] changing pids of channel 368 from 501+501=2:502=deu@3:0:0 to 401+401=2:402=deu@3:0:0
Nov 16 14:08:16 (MLD) user.info vdr: [16222] frontend 0/0 timed out while tuning to channel 1, tp 111837
Nov 16 14:08:21 (MLD) user.debug vdr: [16295] osdteletext-receiver thread ended (pid=16216, tid=16295)
Nov 16 14:08:21 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:08:21 (MLD) user.info vdr: [16216] switching to channel 1
Nov 16 14:08:21 (MLD) user.debug vdr: [16299] osdteletext-receiver thread started (pid=16216, tid=16299, prio=high)
Nov 16 14:08:21 (MLD) user.debug vdr: [16298] femon receiver thread ended (pid=16216, tid=16298)
Nov 16 14:08:22 (MLD) user.debug vdr: [16300] femon receiver thread started (pid=16216, tid=16300, prio=high)
Nov 16 14:08:22 (MLD) user.debug vdr: [16301] receiver on device 2 thread started (pid=16216, tid=16301, prio=high)
Nov 16 14:08:22 (MLD) user.debug vdr: [16302] TS buffer on device 2 thread started (pid=16216, tid=16302, prio=high)
Nov 16 14:08:22 (MLD) user.debug vdr: [16299] osdteletext-receiver thread ended (pid=16216, tid=16299)
Nov 16 14:08:22 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:08:22 (MLD) user.debug vdr: [16303] osdteletext-receiver thread started (pid=16216, tid=16303, prio=high)
Nov 16 14:08:22 (MLD) user.debug vdr: [16300] femon receiver thread ended (pid=16216, tid=16300)
Nov 16 14:08:22 (MLD) user.debug vdr: [16304] femon receiver thread started (pid=16216, tid=16304, prio=high)
Nov 16 14:08:22 (MLD) user.debug vdr: [16297] TS buffer on device 1 thread ended (pid=16216, tid=16297)
Nov 16 14:08:22 (MLD) user.debug vdr: [16296] buffer stats: 564 (0%) used
Nov 16 14:08:22 (MLD) user.debug vdr: [16296] receiver on device 1 thread ended (pid=16216, tid=16296)
Nov 16 14:09:21 (MLD) user.info vdr: [16222] frontend 0/0 timed out while tuning to channel 1, tp 111837
Nov 16 14:10:26 (MLD) user.info vdr: [16222] frontend 0/0 timed out while tuning to channel 1, tp 111837
Nov 16 14:10:45 (MLD) user.info vdr: [16216] switching to channel 2
Nov 16 14:10:45 (MLD) user.debug vdr: [16303] osdteletext-receiver thread ended (pid=16216, tid=16303)
Nov 16 14:10:45 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:10:45 (MLD) user.debug vdr: [16306] receiver on device 1 thread started (pid=16216, tid=16306, prio=high)
Nov 16 14:10:45 (MLD) user.debug vdr: [16305] osdteletext-receiver thread started (pid=16216, tid=16305, prio=high)
Nov 16 14:10:45 (MLD) user.debug vdr: [16307] TS buffer on device 1 thread started (pid=16216, tid=16307, prio=high)
Nov 16 14:10:45 (MLD) user.debug vdr: [16304] femon receiver thread ended (pid=16216, tid=16304)
Nov 16 14:10:45 (MLD) user.debug vdr: [16308] femon receiver thread started (pid=16216, tid=16308, prio=high)
Nov 16 14:10:45 (MLD) user.debug vdr: [16302] TS buffer on device 2 thread ended (pid=16216, tid=16302)
Nov 16 14:10:45 (MLD) user.debug vdr: [16301] buffer stats: 110356 (2%) used
Nov 16 14:10:45 (MLD) user.debug vdr: [16301] receiver on device 2 thread ended (pid=16216, tid=16301)
Nov 16 14:10:51 (MLD) user.debug vdr: [16305] osdteletext-receiver thread ended (pid=16216, tid=16305)
Nov 16 14:10:51 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:10:51 (MLD) user.info vdr: [16216] switching to channel 2
Nov 16 14:10:51 (MLD) user.debug vdr: [16309] osdteletext-receiver thread started (pid=16216, tid=16309, prio=high)
Nov 16 14:10:51 (MLD) user.debug vdr: [16308] femon receiver thread ended (pid=16216, tid=16308)
Nov 16 14:10:51 (MLD) user.debug vdr: [16310] femon receiver thread started (pid=16216, tid=16310, prio=high)
Nov 16 14:10:51 (MLD) user.debug vdr: [16311] receiver on device 2 thread started (pid=16216, tid=16311, prio=high)
Nov 16 14:10:51 (MLD) user.debug vdr: [16312] TS buffer on device 2 thread started (pid=16216, tid=16312, prio=high)
Nov 16 14:10:51 (MLD) user.debug vdr: [16309] osdteletext-receiver thread ended (pid=16216, tid=16309)
Nov 16 14:10:51 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:10:51 (MLD) user.debug vdr: [16313] osdteletext-receiver thread started (pid=16216, tid=16313, prio=high)
Nov 16 14:10:51 (MLD) user.debug vdr: [16310] femon receiver thread ended (pid=16216, tid=16310)
Nov 16 14:10:51 (MLD) user.debug vdr: [16314] femon receiver thread started (pid=16216, tid=16314, prio=high)
Nov 16 14:10:51 (MLD) user.debug vdr: [16307] TS buffer on device 1 thread ended (pid=16216, tid=16307)
Nov 16 14:10:51 (MLD) user.debug vdr: [16306] buffer stats: 376 (0%) used
Nov 16 14:10:51 (MLD) user.debug vdr: [16306] receiver on device 1 thread ended (pid=16216, tid=16306)
Nov 16 14:10:54 (MLD) user.info vdr: [16222] frontend 0/0 timed out while tuning to channel 2, tp 111954
Nov 16 14:11:59 (MLD) user.info vdr: [16222] frontend 0/0 timed out while tuning to channel 2, tp 111954
Nov 16 14:13:04 (MLD) user.info vdr: [16222] frontend 0/0 timed out while tuning to channel 2, tp 111954
Nov 16 14:14:10 (MLD) user.info vdr: [16222] frontend 0/0 timed out while tuning to channel 2, tp 111954
Nov 16 14:14:24 (MLD) user.debug vdr: [16313] osdteletext-receiver thread ended (pid=16216, tid=16313)
Nov 16 14:14:24 (MLD) user.debug vdr: [16216] buffer stats: 0 (0%) used
Nov 16 14:14:24 (MLD) user.info vdr: [16216] switching to channel 2

Alles anzeigen

Snorre · 23. November 2014

Hallo allerseits.

Wollte nur noch schnell Rückmeldung geben, dass das Problem gelöst ist.

Ich hatte tatsächlich 2 Fehler gleichzeitig vorliegen.

Zum einen hat sich herausgestellt, dass die FF nicht SCR-fähig ist (vermutlich keine "sauberen" Diseqc-Befehle)
und zum anderen hatte ich die falsche diseqc.conf im Einsatz.

Nun benutze ich die FF als reines Ausgabegerät und 2 Opera DVB-S als Eingabegeräte und es funktioniert wunderbar

Nochmal vielen Dank an alle für die Hinweise.

ATD · 23. November 2014

Zitat von Snorre

Zum einen hat sich herausgestellt, dass die FF nicht SCR-fähig ist

Das kann ich nicht bestätigen. Siehe zweites System aus meiner Signatur.

Albert

Snorre · 23. November 2014

Zitat von ATD

Das kann ich nicht bestätigen. Siehe zweites System aus meiner Signatur.

Albert

Dann weist meine FF eventuell einen Defekt auf oder es ist Revisionsabhängig.
Tatsache ist jedoch, dass in meiner Konfiguration die FF nicht funktioniert.

ATD · 24. November 2014

Zitat von Snorre

Tatsache ist jedoch, dass in meiner Konfiguration die FF nicht funktioniert.

Dann nehmen wir es einfach so hin. Du hast einen Weg gefunden, darauf kommt es an.

Albert

SCR Konfiguration, bin überfordert

Jetzt mitmachen!

Teilen