[Gelöst] eigene Selberschuld.... VDR lässt sich nur noch manuell starten und andere Probleme...

  • Hallo liebe VDR Gemeinde und ein frohes neues Jahr erstmal.




    Ich hatte vor ein paar Tagen ein Dist-Upgrade gemacht, seitdem will das Frontend nicht mehr starten, nur noch mit dem Befehl vdr "-P"xineliboutput --local=none --remote=37890 --primary""



    Die Syslog spuckt mir :
    Jan 1 11:45:12 rene vdr-sxfe[1823]: [1823] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:12 rene vdr-sxfe[1823]: [1823] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:12 rene vdr-sxfe[1823]: [1823] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    rene kernel: [ 12.445444] init: vdr-frontend main process (1823) terminated with status 250
    Jan 1 11:45:13 rene kernel: [ 12.445484] init: vdr-frontend main process ended, respawning




    und das dauerhaft. Nun gibt es im Internet viele Lösungsansätze, desweiteren ist es auch so das einige Einträge in der var/lib/vdr/setup.conf doppelt vorhanden sind.


    Desweiteren werden keine Plugins mehr geladen, im Einstellungsmenü steht nur noch xinlibout drin...



    Wo soll ich anfangen zu suchen bzw. wie kann ich das problem lösen???


    System steht in der Signatur

    VDR 1:
    Mainboard: Foxconn 45GM
    Prozessor: Core2Duo E6600
    Grafik: Geforce 210 Low Profile (passiv)
    DVB-Karte: Skystar HD/SkyStar HD 2
    Festplatten: 60 GB SSD als Boot/ 1 TB HDD als sdb gemountet als /srv
    Distri: Yavdr 0.6
    zusätzliche Pakete: yaepghd, istreamdev, Filezilla Client
    ----------------------------------------------------------------------
    VDR 2:


    Raspberry PI 512 MB
    16 GB SD Karte
    MLD 4 als Streamdev Client am VDR 1 für Gäste


    ------------------------------------------------------------------------


    (Linux ist ein System das durch Schmerz, Frust und Leid erlernt werden muss, aber wenn es einmal läuft macht es tierisch viel Spaß)

    The post was edited 1 time, last by Morpheus1607 ().

  • Wo soll ich anfangen zu suchen


    Wie sieht das syslog beim Start aus und was steht in deiner /etc/vdr/plugins/order.conf?

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

  • Auszu aus der order.conf




    firstplugin
    secondplugin
    *lastplugin
    -thirdplugin
    -fourthplugin
    *anotherlastplugin
    *dynamite
    dvbhddevice
    dvbsddevice
    -pvr350
    -dummydevice
    -xine
    xineliboutput
    -graphtft
    -softhddevice
    graphtftng
    yaepghd



    und die log


    Jan 1 11:45:07 rene kernel: [ 0.938071] rtc_cmos 00:04: setting system clock to 2014-01-01 10:45:01 UTC (1388573101)
    Jan 1 11:45:07 rene kernel: [ 0.938571] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    Jan 1 11:45:07 rene kernel: [ 0.938573] EDD information not available.
    Jan 1 11:45:07 rene kernel: [ 1.084434] ata1.00: HPA detected: current 488390959, native 488397168
    Jan 1 11:45:07 rene kernel: [ 1.084440] ata1.00: ATA-7: SAMSUNG SP2514N, VF100-33, max UDMA/100
    Jan 1 11:45:07 rene kernel: [ 1.084444] ata1.00: 488390959 sectors, multi 16: LBA48
    Jan 1 11:45:07 rene kernel: [ 1.088443] ata4.01: ATA-8: Hitachi HDS721010CLA330, JP4OA3MA, max UDMA/133
    Jan 1 11:45:07 rene kernel: [ 1.088448] ata4.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Jan 1 11:45:07 rene kernel: [ 1.092329] ata1.00: configured for UDMA/100
    Jan 1 11:45:07 rene kernel: [ 1.092488] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5
    Jan 1 11:45:07 rene kernel: [ 1.092649] sd 0:0:0:0: [sda] 488390959 512-byte logical blocks: (250 GB/232 GiB)
    Jan 1 11:45:07 rene kernel: [ 1.092688] sd 0:0:0:0: Attached scsi generic sg0 type 0
    Jan 1 11:45:07 rene kernel: [ 1.092725] sd 0:0:0:0: [sda] Write Protect is off
    Jan 1 11:45:07 rene kernel: [ 1.092730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jan 1 11:45:07 rene kernel: [ 1.092769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jan 1 11:45:07 rene kernel: [ 1.096318] ata3.00: ATA-8: CSSD-V60GB2, 1.0, max UDMA/100
    Jan 1 11:45:07 rene kernel: [ 1.096321] ata3.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Jan 1 11:45:07 rene kernel: [ 1.096544] ata3.01: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133
    Jan 1 11:45:07 rene kernel: [ 1.096548] ata3.01: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Jan 1 11:45:07 rene kernel: [ 1.102261] sda: sda1
    Jan 1 11:45:07 rene kernel: [ 1.102581] sd 0:0:0:0: [sda] Attached SCSI disk
    Jan 1 11:45:07 rene kernel: [ 1.104429] ata4.01: configured for UDMA/133
    Jan 1 11:45:07 rene kernel: [ 1.112293] ata3.00: configured for UDMA/100
    Jan 1 11:45:07 rene kernel: [ 1.128365] ata3.01: configured for UDMA/133
    Jan 1 11:45:07 rene kernel: [ 1.128470] scsi 2:0:0:0: Direct-Access ATA CSSD-V60GB2 1.0 PQ: 0 ANSI: 5
    Jan 1 11:45:07 rene kernel: [ 1.128615] sd 2:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
    Jan 1 11:45:07 rene kernel: [ 1.128644] sd 2:0:0:0: Attached scsi generic sg1 type 0
    Jan 1 11:45:07 rene kernel: [ 1.128716] sd 2:0:0:0: [sdb] Write Protect is off
    Jan 1 11:45:07 rene kernel: [ 1.128720] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    Jan 1 11:45:07 rene kernel: [ 1.128767] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jan 1 11:45:07 rene kernel: [ 1.128822] scsi 2:0:1:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
    Jan 1 11:45:07 rene kernel: [ 1.128917] sd 2:0:1:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    Jan 1 11:45:07 rene kernel: [ 1.128982] sd 2:0:1:0: Attached scsi generic sg2 type 0
    Jan 1 11:45:07 rene kernel: [ 1.128986] sd 2:0:1:0: [sdc] Write Protect is off
    Jan 1 11:45:07 rene kernel: [ 1.128989] sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
    Jan 1 11:45:07 rene kernel: [ 1.129011] sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jan 1 11:45:07 rene kernel: [ 1.129073] scsi 3:0:1:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
    Jan 1 11:45:07 rene kernel: [ 1.129204] sd 3:0:1:0: Attached scsi generic sg3 type 0
    Jan 1 11:45:07 rene kernel: [ 1.129292] sd 3:0:1:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    Jan 1 11:45:07 rene kernel: [ 1.129367] sd 3:0:1:0: [sdd] Write Protect is off
    Jan 1 11:45:07 rene kernel: [ 1.129370] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
    Jan 1 11:45:07 rene kernel: [ 1.129402] sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jan 1 11:45:07 rene kernel: [ 1.141047] sdd: sdd1 < sdd5 >
    Jan 1 11:45:07 rene kernel: [ 1.141389] sd 3:0:1:0: [sdd] Attached SCSI disk
    Jan 1 11:45:07 rene kernel: [ 1.142860] sdc: sdc1 < sdc5 >
    Jan 1 11:45:07 rene kernel: [ 1.143552] sdb: sdb1 sdb2 < sdb5 >
    Jan 1 11:45:07 rene kernel: [ 1.143624] sd 2:0:1:0: [sdc] Attached SCSI disk
    Jan 1 11:45:07 rene kernel: [ 1.143944] sd 2:0:0:0: [sdb] Attached SCSI disk
    Jan 1 11:45:07 rene kernel: [ 1.145500] Freeing unused kernel memory: 924k freed
    Jan 1 11:45:07 rene kernel: [ 1.145752] Write protecting the kernel read-only data: 12288k
    Jan 1 11:45:07 rene kernel: [ 1.150874] Freeing unused kernel memory: 1588k freed
    Jan 1 11:45:07 rene kernel: [ 1.155094] Freeing unused kernel memory: 1188k freed
    Jan 1 11:45:07 rene kernel: [ 1.190452] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    Jan 1 11:45:07 rene kernel: [ 1.190455] vesafb: scrolling: redraw
    Jan 1 11:45:07 rene kernel: [ 1.190458] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Jan 1 11:45:07 rene kernel: [ 1.192857] vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90011100000, using 3072k, total 3072k
    Jan 1 11:45:07 rene kernel: [ 1.192989] Console: switching to colour frame buffer device 128x48
    Jan 1 11:45:07 rene kernel: [ 1.193007] fb0: VESA VGA frame buffer device
    Jan 1 11:45:07 rene kernel: [ 1.246601] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    Jan 1 11:45:07 rene kernel: [ 1.246637] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
    Jan 1 11:45:07 rene kernel: [ 1.246992] 8139too: 8139too Fast Ethernet driver 0.9.28
    Jan 1 11:45:07 rene kernel: [ 1.247019] 8139too 0000:02:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jan 1 11:45:07 rene kernel: [ 1.247901] 8139too 0000:02:03.0: eth0: RealTek RTL8139 at 0xee00, 00:1c:25:07:89:fc, IRQ 16
    Jan 1 11:45:07 rene kernel: [ 1.248023] Refined TSC clocksource calibration: 2393.999 MHz.
    Jan 1 11:45:07 rene kernel: [ 1.248028] Switching to clocksource tsc
    Jan 1 11:45:07 rene kernel: [ 1.274534] Floppy drive(s): fd0 is 1.44M
    Jan 1 11:45:07 rene kernel: [ 1.291670] FDC 0 is a post-1991 82077
    Jan 1 11:45:07 rene kernel: [ 1.352120] usb 1-8: new high-speed USB device number 3 using ehci_hcd
    Jan 1 11:45:07 rene kernel: [ 1.453470] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem
    Jan 1 11:45:07 rene kernel: [ 1.453474] EXT4-fs (sdb1): write access will be enabled during recovery
    Jan 1 11:45:07 rene kernel: [ 1.728033] usb 3-2: new full-speed USB device number 2 using uhci_hcd
    Jan 1 11:45:07 rene kernel: [ 1.826796] EXT4-fs (sdb1): orphan cleanup on readonly fs
    Jan 1 11:45:07 rene kernel: [ 1.826803] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1836
    Jan 1 11:45:07 rene kernel: [ 1.826829] EXT4-fs (sdb1): 1 orphan inode deleted
    Jan 1 11:45:07 rene kernel: [ 1.826831] EXT4-fs (sdb1): recovery complete
    Jan 1 11:45:07 rene kernel: [ 1.912802] hub 3-2:1.0: USB hub found
    Jan 1 11:45:07 rene kernel: [ 1.914757] hub 3-2:1.0: 3 ports detected
    Jan 1 11:45:07 rene kernel: [ 2.193764] usb 3-2.2: new full-speed USB device number 3 using uhci_hcd
    Jan 1 11:45:07 rene kernel: [ 2.361090] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.2/3-2.2:1.0/input/input2
    Jan 1 11:45:07 rene kernel: [ 2.361189] generic-usb 0003:046D:C71E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.1-2.2/input0
    Jan 1 11:45:07 rene kernel: [ 2.361202] usbcore: registered new interface driver usbhid
    Jan 1 11:45:07 rene kernel: [ 2.361204] usbhid: USB HID core driver
    Jan 1 11:45:07 rene kernel: [ 2.425774] usb 3-2.3: new full-speed USB device number 4 using uhci_hcd
    Jan 1 11:45:07 rene kernel: [ 2.595729] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.3/3-2.3:1.0/input/input3
    Jan 1 11:45:07 rene kernel: [ 2.596286] logitech 0003:046D:C71F.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.1-2.3/input0
    Jan 1 11:45:07 rene kernel: [ 2.713054] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    Jan 1 11:45:07 rene kernel: [ 4.562979] Adding 7405928k swap on /dev/sdb5. Priority:-1 extents:1 across:7405928k SS
    Jan 1 11:45:07 rene kernel: [ 4.580495] ADDRCONF(NETDEV_UP): eth0: link is not ready
    Jan 1 11:45:07 rene kernel: [ 4.600211] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
    Jan 1 11:45:07 rene kernel: [ 5.170190] parport_pc 00:0a: reported by Plug and Play ACPI
    Jan 1 11:45:07 rene kernel: [ 5.170235] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    Jan 1 11:45:07 rene kernel: [ 5.215181] intel_rng: FWH not detected
    Jan 1 11:45:07 rene kernel: [ 5.219308] lp: driver loaded but no devices found
    Jan 1 11:45:07 rene kernel: [ 5.256185] lp0: using parport0 (interrupt-driven).
    Jan 1 11:45:07 rene kernel: [ 5.268850] IR NEC protocol handler initialized
    Jan 1 11:45:07 rene kernel: [ 5.279793] ppdev: user-space parallel port driver
    Jan 1 11:45:07 rene kernel: [ 5.290393] IR RC5(x) protocol handler initialized
    Jan 1 11:45:07 rene kernel: [ 5.292607] leds_ss4200: no LED devices found
    Jan 1 11:45:07 rene kernel: [ 5.317586] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    Jan 1 11:45:07 rene kernel: [ 5.318215] SGI XFS Quota Management subsystem
    Jan 1 11:45:07 rene kernel: [ 5.319928] XFS (sdc5): Mounting Filesystem
    Jan 1 11:45:07 rene kernel: [ 5.432249] IR RC6 protocol handler initialized
    Jan 1 11:45:07 rene kernel: [ 5.441757] IR JVC protocol handler initialized
    Jan 1 11:45:07 rene kernel: [ 5.444677] IR Sony protocol handler initialized
    Jan 1 11:45:07 rene kernel: [ 5.450101] IR MCE Keyboard/mouse protocol handler initialized
    Jan 1 11:45:07 rene kernel: [ 5.462026] lirc_dev: IR Remote Control driver registered, major 250
    Jan 1 11:45:07 rene kernel: [ 5.462695] IR LIRC bridge handler initialized
    Jan 1 11:45:07 rene kernel: [ 5.540580] Mantis 0000:02:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Jan 1 11:45:07 rene kernel: [ 5.540588] Mantis 0000:02:01.0: setting latency timer to 64
    Jan 1 11:45:07 rene kernel: [ 5.542069] DVB: registering new adapter (Mantis DVB adapter)
    Jan 1 11:45:07 rene kernel: [ 5.568754] rtl8188eu driver version=v4.1.2_4787.20120803
    Jan 1 11:45:07 rene kernel: [ 5.568758] build time: Dec 7 2013 22:38:38
    Jan 1 11:45:07 rene kernel: [ 5.568795] register rtw_netdev_ops to netdev_ops
    Jan 1 11:45:07 rene kernel: [ 5.568798] CHIP TYPE: RTL8188E
    Jan 1 11:45:07 rene kernel: [ 5.568803]
    Jan 1 11:45:07 rene kernel: [ 5.568803] usb_endpoint_descriptor(0):
    Jan 1 11:45:07 rene kernel: [ 5.568805] bLength=7
    Jan 1 11:45:07 rene kernel: [ 5.568806] bDescriptorType=5
    Jan 1 11:45:07 rene kernel: [ 5.568807] bEndpointAddress=81
    Jan 1 11:45:07 rene kernel: [ 5.568809] wMaxPacketSize=512
    Jan 1 11:45:07 rene kernel: [ 5.568810] bInterval=0
    Jan 1 11:45:07 rene kernel: [ 5.568811] RT_usb_endpoint_is_bulk_in = 1
    Jan 1 11:45:07 rene kernel: [ 5.568812]
    Jan 1 11:45:07 rene kernel: [ 5.568813] usb_endpoint_descriptor(1):
    Jan 1 11:45:07 rene kernel: [ 5.568814] bLength=7
    Jan 1 11:45:07 rene kernel: [ 5.568815] bDescriptorType=5
    Jan 1 11:45:07 rene kernel: [ 5.568817] bEndpointAddress=2
    Jan 1 11:45:07 rene kernel: [ 5.568818] wMaxPacketSize=512
    Jan 1 11:45:07 rene kernel: [ 5.568819] bInterval=0
    Jan 1 11:45:07 rene kernel: [ 5.568820] RT_usb_endpoint_is_bulk_out = 2
    Jan 1 11:45:07 rene kernel: [ 5.568822]
    Jan 1 11:45:07 rene kernel: [ 5.568822] usb_endpoint_descriptor(2):
    Jan 1 11:45:07 rene kernel: [ 5.568823] bLength=7
    Jan 1 11:45:07 rene kernel: [ 5.568824] bDescriptorType=5
    Jan 1 11:45:07 rene kernel: [ 5.568826] bEndpointAddress=3
    Jan 1 11:45:07 rene kernel: [ 5.568827] wMaxPacketSize=512
    Jan 1 11:45:07 rene kernel: [ 5.568828] bInterval=0
    Jan 1 11:45:07 rene kernel: [ 5.568829] RT_usb_endpoint_is_bulk_out = 3
    Jan 1 11:45:07 rene kernel: [ 5.568831] nr_endpoint=3, in_num=1, out_num=2
    Jan 1 11:45:07 rene kernel: [ 5.568832]
    Jan 1 11:45:07 rene kernel: [ 5.568833] USB_SPEED_HIGH
    Jan 1 11:45:07 rene kernel: [ 5.569906] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_A_CUT_1T1R_RomVer(0)
    Jan 1 11:45:07 rene kernel: [ 5.569912] RF_Type is 3!!
    Jan 1 11:45:07 rene kernel: [ 5.569914] _ConfigNormalChipOutEP_8188E OutEpQueueSel(0x05), OutEpNumber(2)
    Jan 1 11:45:07 rene kernel: [ 5.570030] EEPROM type is E-FUSE
    Jan 1 11:45:07 rene kernel: [ 5.570032] ====> _ReadAdapterInfo8188EU
    Jan 1 11:45:07 rene kernel: [ 5.570193] Boot from EFUSE, Autoload OK !
    Jan 1 11:45:07 rene kernel: [ 5.694418] nvidia: module license 'NVIDIA' taints kernel.
    Jan 1 11:45:07 rene kernel: [ 5.694422] Disabling lock debugging due to kernel taint
    Jan 1 11:45:07 rene kernel: [ 5.726124] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jan 1 11:45:07 rene kernel: [ 5.726251] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
    Jan 1 11:45:07 rene kernel: [ 5.726277] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    Jan 1 11:45:07 rene kernel: [ 5.795708] hda_codec: ALC883: BIOS auto-probing.
    Jan 1 11:45:07 rene kernel: [ 5.822146] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
    Jan 1 11:45:07 rene kernel: [ 5.822341] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    Jan 1 11:45:07 rene kernel: [ 5.824387] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    Jan 1 11:45:07 rene kernel: [ 5.824570] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    Jan 1 11:45:07 rene kernel: [ 5.824769] input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    Jan 1 11:45:07 rene kernel: [ 5.826000] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jan 1 11:45:07 rene kernel: [ 5.826004] hda_intel: Disabling MSI
    Jan 1 11:45:07 rene kernel: [ 5.826032] snd_hda_intel 0000:01:00.1: setting latency timer to 64
    Jan 1 11:45:07 rene kernel: [ 5.898169] EEPROM ID=0x8129
    Jan 1 11:45:07 rene kernel: [ 5.898172] VID = 0x0BDA, PID = 0x8179
    Jan 1 11:45:07 rene kernel: [ 5.898174] Customer ID: 0x00, SubCustomer ID: 0xCD
    Jan 1 11:45:07 rene kernel: [ 5.898177] Hal_ReadPowerSavingMode88E...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
    Jan 1 11:45:07 rene kernel: [ 5.898179] ### PS params=> power_mgnt(0),usbss_enable(0) ###
    Jan 1 11:45:07 rene kernel: [ 5.898182] ======= Path 0, Channel 0 =======
    Jan 1 11:45:07 rene kernel: [ 5.898183] Index24G_CCK_Base[0][0] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898185] Index24G_BW40_Base[0][0] = 0x2c
    Jan 1 11:45:07 rene kernel: [ 5.898186] ======= Path 0, Channel 1 =======
    Jan 1 11:45:07 rene kernel: [ 5.898188] Index24G_CCK_Base[0][1] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898190] Index24G_BW40_Base[0][1] = 0x2c
    Jan 1 11:45:07 rene kernel: [ 5.898191] ======= Path 0, Channel 2 =======
    Jan 1 11:45:07 rene kernel: [ 5.898193] Index24G_CCK_Base[0][2] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898194] Index24G_BW40_Base[0][2] = 0x2c
    Jan 1 11:45:07 rene kernel: [ 5.898196] ======= Path 0, Channel 3 =======
    Jan 1 11:45:07 rene kernel: [ 5.898197] Index24G_CCK_Base[0][3] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898199] Index24G_BW40_Base[0][3] = 0x2c
    Jan 1 11:45:07 rene kernel: [ 5.898200] ======= Path 0, Channel 4 =======
    Jan 1 11:45:07 rene kernel: [ 5.898202] Index24G_CCK_Base[0][4] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898203] Index24G_BW40_Base[0][4] = 0x2c
    Jan 1 11:45:07 rene kernel: [ 5.898205] ======= Path 0, Channel 5 =======
    Jan 1 11:45:07 rene kernel: [ 5.898207] Index24G_CCK_Base[0][5] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898208] Index24G_BW40_Base[0][5] = 0x2c
    Jan 1 11:45:07 rene kernel: [ 5.898210] ======= Path 0, Channel 6 =======
    Jan 1 11:45:07 rene kernel: [ 5.898211] Index24G_CCK_Base[0][6] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898213] Index24G_BW40_Base[0][6] = 0x2b
    Jan 1 11:45:07 rene kernel: [ 5.898214] ======= Path 0, Channel 7 =======
    Jan 1 11:45:07 rene kernel: [ 5.898216] Index24G_CCK_Base[0][7] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898218] Index24G_BW40_Base[0][7] = 0x2b
    Jan 1 11:45:07 rene kernel: [ 5.898219] ======= Path 0, Channel 8 =======
    Jan 1 11:45:07 rene kernel: [ 5.898221] Index24G_CCK_Base[0][8] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898222] Index24G_BW40_Base[0][8] = 0x2b
    Jan 1 11:45:07 rene kernel: [ 5.898224] ======= Path 0, Channel 9 =======
    Jan 1 11:45:07 rene kernel: [ 5.898225] Index24G_CCK_Base[0][9] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898227] Index24G_BW40_Base[0][9] = 0x2b
    Jan 1 11:45:07 rene kernel: [ 5.898228] ======= Path 0, Channel 10 =======
    Jan 1 11:45:07 rene kernel: [ 5.898230] Index24G_CCK_Base[0][10] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898231] Index24G_BW40_Base[0][10] = 0x2b
    Jan 1 11:45:07 rene kernel: [ 5.898233] ======= Path 0, Channel 11 =======
    Jan 1 11:45:07 rene kernel: [ 5.898234] Index24G_CCK_Base[0][11] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898236] Index24G_BW40_Base[0][11] = 0x2b
    Jan 1 11:45:07 rene kernel: [ 5.898238] ======= Path 0, Channel 12 =======
    Jan 1 11:45:07 rene kernel: [ 5.898239] Index24G_CCK_Base[0][12] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898241] Index24G_BW40_Base[0][12] = 0x2b
    Jan 1 11:45:07 rene kernel: [ 5.898242] ======= Path 0, Channel 13 =======
    Jan 1 11:45:07 rene kernel: [ 5.898244] Index24G_CCK_Base[0][13] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898245] Index24G_BW40_Base[0][13] = 0x2b
    Jan 1 11:45:07 rene kernel: [ 5.898247] ======= Path 0, Channel 14 =======
    Jan 1 11:45:07 rene kernel: [ 5.898248] Index24G_CCK_Base[0][14] = 0x28
    Jan 1 11:45:07 rene kernel: [ 5.898250] Index24G_BW40_Base[0][14] = 0x2b
    Jan 1 11:45:07 rene kernel: [ 5.898251] ======= TxCount 0 =======
    Jan 1 11:45:07 rene kernel: [ 5.898253] CCK_24G_Diff[0][0]= 0
    Jan 1 11:45:07 rene kernel: [ 5.898254] OFDM_24G_Diff[0][0]= 1
    Jan 1 11:45:07 rene kernel: [ 5.898256] BW20_24G_Diff[0][0]= -1
    Jan 1 11:45:07 rene kernel: [ 5.898257] BW40_24G_Diff[0][0]= 0
    Jan 1 11:45:07 rene kernel: [ 5.898259] ======= TxCount 1 =======
    Jan 1 11:45:07 rene kernel: [ 5.898260] CCK_24G_Diff[0][1]= -2
    Jan 1 11:45:07 rene kernel: [ 5.898262] OFDM_24G_Diff[0][1]= -2
    Jan 1 11:45:07 rene kernel: [ 5.898263] BW20_24G_Diff[0][1]= -2
    Jan 1 11:45:07 rene kernel: [ 5.898265] BW40_24G_Diff[0][1]= -2
    Jan 1 11:45:07 rene kernel: [ 5.898266] ======= TxCount 2 =======
    Jan 1 11:45:07 rene kernel: [ 5.898267] CCK_24G_Diff[0][2]= -2
    Jan 1 11:45:07 rene kernel: [ 5.898269] OFDM_24G_Diff[0][2]= -2
    Jan 1 11:45:07 rene kernel: [ 5.898270] BW20_24G_Diff[0][2]= -2
    Jan 1 11:45:07 rene kernel: [ 5.898272] BW40_24G_Diff[0][2]= -2
    Jan 1 11:45:07 rene kernel: [ 5.898273] ======= TxCount 3 =======
    Jan 1 11:45:07 rene kernel: [ 5.898275] CCK_24G_Diff[0][3]= -2
    Jan 1 11:45:07 rene kernel: [ 5.898276] OFDM_24G_Diff[0][3]= -2
    Jan 1 11:45:07 rene kernel: [ 5.898278] BW20_24G_Diff[0][3]= -2
    Jan 1 11:45:07 rene kernel: [ 5.898279] BW40_24G_Diff[0][3]= -2
    Jan 1 11:45:07 rene kernel: [ 5.898281] EEPROMRegulatory = 0x0
    Jan 1 11:45:07 rene kernel: [ 5.898282] mlmepriv.ChannelPlan = 0x20
    Jan 1 11:45:07 rene kernel: [ 5.898284] EEPROM Customer ID: 0x 0
    Jan 1 11:45:07 rene kernel: [ 5.898285] EEPROM : AntDivCfg = 0, TRxAntDivType = 3
    Jan 1 11:45:07 rene kernel: [ 5.898287] Board Type: 0x 0
    Jan 1 11:45:07 rene kernel: [ 5.898288] ThermalMeter = 0x1a
    Jan 1 11:45:07 rene kernel: [ 5.898290] <==== _ReadAdapterInfo8188EU in 328 ms
    Jan 1 11:45:07 rene kernel: [ 5.898529] rtw_macaddr_cfg MAC Address = f8:1a:67:26:b7:bd
    Jan 1 11:45:07 rene kernel: [ 5.898531] MAC Address from pnetdev->dev_addr= f8:1a:67:26:b7:bd
    Jan 1 11:45:07 rene kernel: [ 5.899489] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
    Jan 1 11:45:07 rene kernel: [ 5.900229] usbcore: registered new interface driver rtl8188eu
    Jan 1 11:45:07 rene kernel: [ 6.009413] XFS (sdc5): Starting recovery (logdev: internal)
    Jan 1 11:45:07 rene kernel: [ 6.092710] +871x_drv - drv_open, bup=0
    Jan 1 11:45:07 rene kernel: [ 6.140300] rtl8188e_FirmwareDownload: fw_ver=4 fw_subver=0 sig=0x88e1
    Jan 1 11:45:07 rene kernel: [ 6.146875] XFS (sdc5): Ending recovery (logdev: internal)
    Jan 1 11:45:07 rene kernel: [ 6.170302] _FWFreeToGo: Checksum report OK! REG_MCUFWDL:0x00030004
    Jan 1 11:45:07 rene kernel: [ 6.173427] _FWFreeToGo: Polling FW ready success!! REG_MCUFWDL:0x000300c6
    Jan 1 11:45:07 rene kernel: [ 6.173431] Set RF Chip ID to RF_6052 and RF type to 1T1R.
    Jan 1 11:45:07 rene kernel: [ 6.209066] RPC: Registered named UNIX socket transport module.
    Jan 1 11:45:07 rene kernel: [ 6.209071] RPC: Registered udp transport module.
    Jan 1 11:45:07 rene kernel: [ 6.209072] RPC: Registered tcp transport module.
    Jan 1 11:45:07 rene kernel: [ 6.209074] RPC: Registered tcp NFSv4.1 backchannel transport module.
    Jan 1 11:45:07 rene kernel: [ 6.219233] FS-Cache: Loaded
    Jan 1 11:45:07 rene kernel: [ 6.249931] FS-Cache: Netfs 'nfs' registered for caching
    Jan 1 11:45:07 rene kernel: [ 6.278982] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    Jan 1 11:45:07 rene kernel: [ 6.335172] init: mhddfs-vdr post-start process (951) terminated with status 32
    Jan 1 11:45:07 rene kernel: [ 6.494072] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
    Jan 1 11:45:07 rene kernel: [ 6.525272] [drm] Initialized drm 1.1.0 20060810
    Jan 1 11:45:07 rene kernel: [ 6.527816] pDM_Odm TxPowerTrackControl = 1
    Jan 1 11:45:07 rene kernel: [ 6.537712] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
    Jan 1 11:45:07 rene kernel: [ 6.730072] MAC Address from REG_MACID = f8:1a:67:26:b7:bd
    Jan 1 11:45:07 rene kernel: [ 6.730077] rtl8188eu_hal_init in 636ms
    Jan 1 11:45:07 rene kernel: [ 6.730081] MAC Address = f8:1a:67:26:b7:bd
    Jan 1 11:45:07 rene kernel: [ 6.732104] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
    Jan 1 11:45:07 rene kernel: [ 6.734491] -871x_drv - drv_open, bup=1
    Jan 1 11:45:07 rene kernel: [ 6.734985] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Jan 1 11:45:07 rene kernel: [ 6.735003] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
    Jan 1 11:45:07 rene kernel: [ 6.735015] set_mode = IW_MODE_INFRA
    Jan 1 11:45:07 rene kernel: [ 6.737946] hw_var_set_opmode()-3434 mode = 2
    Jan 1 11:45:07 rene kernel: [ 6.752160] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
    Jan 1 11:45:07 rene kernel: [ 6.756074] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
    Jan 1 11:45:07 rene kernel: [ 6.780038] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
    Jan 1 11:45:07 rene ntpdate[1046]: Can't find host ntp.ubuntu.com: Name or service not known (-2)
    Jan 1 11:45:07 rene ntpdate[1046]: no servers can be used, exiting
    Jan 1 11:45:07 rene kernel: [ 6.804086] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
    Jan 1 11:45:07 rene kernel: [ 6.804329] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    Jan 1 11:45:07 rene kernel: [ 6.804495] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    Jan 1 11:45:07 rene kernel: [ 6.804622] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    Jan 1 11:45:07 rene kernel: [ 6.804747] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
    Jan 1 11:45:07 rene kernel: [ 6.805425] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jan 1 11:45:07 rene kernel: [ 6.805435] nvidia 0000:01:00.0: setting latency timer to 64
    Jan 1 11:45:07 rene kernel: [ 6.805441] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    Jan 1 11:45:07 rene kernel: [ 6.805586] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
    Jan 1 11:45:08 rene kernel: [ 7.628840] NVRM: Your system is not currently configured to drive a VGA console
    Jan 1 11:45:08 rene kernel: [ 7.628844] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
    Jan 1 11:45:08 rene kernel: [ 7.628846] NVRM: requires the use of a text-mode VGA console. Use of other console
    Jan 1 11:45:08 rene kernel: [ 7.628848] NVRM: drivers including, but not limited to, vesafb, may result in
    Jan 1 11:45:08 rene kernel: [ 7.628850] NVRM: corruption and stability problems, and is not supported.
    Jan 1 11:45:08 rene vdr: [1127] ERROR: can't access /srv/vdr/video.00
    Jan 1 11:45:08 rene kernel: [ 8.128754] init: vdr main process (1127) terminated with status 2
    Jan 1 11:45:08 rene dbus[981]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
    Jan 1 11:45:08 rene dbus2vdr: dbus2vdr-daemon on rene starting, conf = /var/lib/vdr/plugins/dbus2vdr
    Jan 1 11:45:08 rene kernel: [ 8.289577] init: failsafe main process (946) killed by TERM signal
    Jan 1 11:45:08 rene kernel: [ 8.315947] init: vdr-exit-2 main process (1276) terminated with status 1
    Jan 1 11:45:08 rene dbus[981]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
    Jan 1 11:45:08 rene polkitd[1328]: started daemon version 0.104 using authority implementation `local' version `0.104'
    Jan 1 11:45:08 rene dbus[981]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
    Jan 1 11:45:08 rene dbus[981]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
    Jan 1 11:45:08 rene anacron[1372]: Anacron 2.3 started on 2014-01-01
    Jan 1 11:45:08 rene acpid: starting up with proc fs
    Jan 1 11:45:08 rene acpid: 35 rules loaded
    Jan 1 11:45:08 rene acpid: waiting for events: event logging is off
    Jan 1 11:45:08 rene anacron[1372]: Will run job `cron.daily' in 5 min.
    Jan 1 11:45:08 rene anacron[1372]: Jobs will be executed sequentially
    Jan 1 11:45:08 rene cron[1353]: (CRON) INFO (pidfile fd = 3)
    Jan 1 11:45:08 rene cron[1375]: (CRON) STARTUP (fork ok)
    Jan 1 11:45:08 rene cron[1375]: (CRON) INFO (Running @reboot jobs)
    Jan 1 11:45:09 rene dbus[981]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
    Jan 1 11:45:09 rene dbus[981]: [system] Successfully activated service 'org.freedesktop.UDisks'
    Jan 1 11:45:09 rene kernel: [ 8.600549] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    Jan 1 11:45:09 rene kernel: [ 8.600932] NFSD: starting 90-second grace period
    Jan 1 11:45:09 rene avahi-daemon[1560]: Found user 'avahi' (UID 103) and group 'avahi' (GID 108).
    Jan 1 11:45:09 rene avahi-daemon[1560]: Successfully dropped root privileges.
    Jan 1 11:45:09 rene avahi-daemon[1560]: avahi-daemon 0.6.30 starting up.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Successfully called chroot().
    Jan 1 11:45:09 rene avahi-daemon[1560]: Successfully dropped remaining capabilities.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Loading service file /services/udisks.service.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Loading service file /services/vdr-audio.service.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Loading service file /services/vdr-picture.service.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Loading service file /services/vdr-svdrp.service.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Loading service file /services/vdr-vdr.service.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Loading service file /services/vdr-video.service.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Network interface enumeration completed.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Registering HINFO record with values 'X86_64'/'LINUX'.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Server startup complete. Host name is rene.local. Local service cookie is 1397249250.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Service "Videos on rene" (/services/vdr-video.service) successfully established.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Service "Recordings on rene" (/services/vdr-vdr.service) successfully established.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Service "SVDRP on rene" (/services/vdr-svdrp.service) successfully established.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Service "Pictures on rene" (/services/vdr-picture.service) successfully established.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Service "Music on rene" (/services/vdr-audio.service) successfully established.
    Jan 1 11:45:09 rene avahi-daemon[1560]: Service "rene" (/services/udisks.service) successfully established.
    Jan 1 11:45:09 rene rpc.mountd[1566]: Version 1.2.5 starting
    Jan 1 11:45:09 rene avahi-mounter[1561]: mount static to /srv/vdr/video.00
    Jan 1 11:45:09 rene avahi-mounter[1561]: initialized zeroconf browser on rene
    Jan 1 11:45:10 rene kernel: [ 9.617167] survey done event(c)
    Jan 1 11:45:10 rene wpa_supplicant[1012]: Trying to associate with 00:16:0a:1e:79:b8 (SSID='10001' freq=2442 MHz)
    Jan 1 11:45:10 rene wpa_supplicant[1012]: Association request to the driver failed
    Jan 1 11:45:10 rene kernel: [ 9.912296] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
    Jan 1 11:45:10 rene kernel: [ 9.912301] set_mode = IW_MODE_INFRA
    Jan 1 11:45:10 rene kernel: [ 9.912314]
    Jan 1 11:45:10 rene kernel: [ 9.912315] wpa_ie(length:22):
    Jan 1 11:45:10 rene kernel: [ 9.912317] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
    Jan 1 11:45:10 rene kernel: [ 9.912319] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
    Jan 1 11:45:10 rene kernel: [ 9.912321] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
    Jan 1 11:45:10 rene kernel: [ 9.912331] =>rtw_wx_set_essid
    Jan 1 11:45:10 rene kernel: [ 9.912333] ssid=10001, len=5
    Jan 1 11:45:10 rene kernel: [ 9.912337] Set SSID under fw_state=0x00000008
    Jan 1 11:45:10 rene kernel: [ 9.912341] [by_bssid:0][assoc_ssid:10001][to_roaming:0] new candidate: 10001(00:16:0a:1e:79:b8) rssi:-85
    Jan 1 11:45:10 rene kernel: [ 9.912345] rtw_select_and_join_from_scanned_queue: candidate: 10001(00:16:0a:1e:79:b8)
    Jan 1 11:45:10 rene kernel: [ 9.912352] link to Ralink AP
    Jan 1 11:45:10 rene kernel: [ 9.912355] <=rtw_wx_set_essid, ret 0
    Jan 1 11:45:10 rene kernel: [ 9.912359] Set BSSID under fw_state=0x00000088
    Jan 1 11:45:10 rene kernel: [ 9.913425] hw_var_set_opmode()-3434 mode = 2
    Jan 1 11:45:10 rene kernel: [ 9.914300] set ch/bw before connected
    Jan 1 11:45:10 rene kernel: [ 9.952817] link to Ralink AP
    Jan 1 11:45:10 rene kernel: [ 9.952824] issue_deauth to 00:16:0a:1e:79:b8
    Jan 1 11:45:10 rene kernel: [ 9.952835] issue_auth
    Jan 1 11:45:10 rene kernel: [ 9.955301] OnAuthClient
    Jan 1 11:45:10 rene kernel: [ 9.955308] network.SupportedRates[0]=82
    Jan 1 11:45:10 rene kernel: [ 9.955310] network.SupportedRates[1]=84
    Jan 1 11:45:10 rene kernel: [ 9.955312] network.SupportedRates[2]=8B
    Jan 1 11:45:10 rene kernel: [ 9.955315] network.SupportedRates[3]=96
    Jan 1 11:45:10 rene kernel: [ 9.955317] network.SupportedRates[4]=12
    Jan 1 11:45:10 rene kernel: [ 9.955319] network.SupportedRates[5]=24
    Jan 1 11:45:10 rene kernel: [ 9.955321] network.SupportedRates[6]=48
    Jan 1 11:45:10 rene kernel: [ 9.955323] network.SupportedRates[7]=6C
    Jan 1 11:45:10 rene kernel: [ 9.955325] network.SupportedRates[8]=0C
    Jan 1 11:45:10 rene kernel: [ 9.955327] network.SupportedRates[9]=18
    Jan 1 11:45:10 rene kernel: [ 9.955330] network.SupportedRates[10]=30
    Jan 1 11:45:10 rene kernel: [ 9.955332] network.SupportedRates[11]=60
    Jan 1 11:45:10 rene kernel: [ 9.955334] bssrate_len = 12
    Jan 1 11:45:10 rene wpa_supplicant[1012]: Associated with 00:16:0a:1e:79:b8
    Jan 1 11:45:10 rene kernel: [ 9.958929] OnAssocRsp
    Jan 1 11:45:10 rene kernel: [ 9.958935] report_join_res(3)
    Jan 1 11:45:10 rene kernel: [ 9.958939] rtw_joinbss_update_network
    Jan 1 11:45:10 rene kernel: [ 9.958942] +rtw_update_ht_cap()
    Jan 1 11:45:10 rene kernel: [ 9.958949] rtw_joinbss_update_stainfo
    Jan 1 11:45:10 rene kernel: [ 9.958952] ### Set STA_(0) info
    Jan 1 11:45:10 rene kernel: [ 9.958976] HW_VAR_BASIC_RATE: BrateCfg(0x15f)
    Jan 1 11:45:10 rene kernel: [ 9.959457] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    Jan 1 11:45:10 rene kernel: [ 9.960071] WMM(0): 0, a42b
    Jan 1 11:45:10 rene kernel: [ 9.960182] WMM(1): 0, a44f
    Jan 1 11:45:10 rene kernel: [ 9.960306] WMM(2): 0, 5e4322
    Jan 1 11:45:10 rene kernel: [ 9.960427] WMM(3): 0, 2f3222
    Jan 1 11:45:10 rene kernel: [ 9.960429] HTOnAssocRsp
    Jan 1 11:45:10 rene kernel: [ 9.966430] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
    Jan 1 11:45:10 rene kernel: [ 9.966432] ==> rssi_level:0, rate_bitmap:0x000ff015
    Jan 1 11:45:10 rene kernel: [ 9.966436] ### MacID(0),Set Max Tx RPT MID(1)
    Jan 1 11:45:10 rene kernel: [ 9.966552] ### rtl8188e_set_FwMediaStatus_cmd: MStatus=1 MACID=0
    Jan 1 11:45:10 rene kernel: [ 9.968303] rtl8188e_set_FwJoinBssReport_cmd mstatus(1)
    Jan 1 11:45:10 rene kernel: [ 9.969176] SetFwRsvdPagePkt
    Jan 1 11:45:10 rene kernel: [ 9.969186] SetFwRsvdPagePkt: Set RSVD page location to Fw
    Jan 1 11:45:10 rene kernel: [ 9.970176] rtl8188e_set_FwJoinBssReport_cmd: 1 Download RSVD success! DLBcnCount:1, poll:1
    Jan 1 11:45:10 rene kernel: [ 9.970679] Set RSVD page location to Fw.
    Jan 1 11:45:10 rene kernel: [ 9.970801] =>mlmeext_joinbss_event_callback
    Jan 1 11:45:10 rene kernel: [ 10.215355] init: plymouth-stop pre-start process (1673) terminated with status 1
    Jan 1 11:45:11 rene kernel: [ 10.740086] Group handshake still in progress !!!
    Jan 1 11:45:11 rene kernel: [ 10.745082] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
    Jan 1 11:45:11 rene kernel: [ 10.745084] ==> rssi_level:3, rate_bitmap:0x000ff015
    Jan 1 11:45:11 rene vdr-sxfe[1553]: [1553] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:11 rene vdr-sxfe[1553]: [1553] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:11 rene vdr-sxfe[1553]: [1553] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:11 rene vdr-sxfe[1553]: [1553] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:11 rene wpa_supplicant[1012]: WPA: Key negotiation completed with 00:16:0a:1e:79:b8 [PTK=CCMP GTK=CCMP]
    Jan 1 11:45:11 rene wpa_supplicant[1012]: CTRL-EVENT-CONNECTED - Connection to 00:16:0a:1e:79:b8 completed (auth) [id=0 id_str=]
    Jan 1 11:45:11 rene kernel: [ 11.158806]
    Jan 1 11:45:11 rene kernel: [ 11.158808] ~~~~stastakey:unicastkey
    Jan 1 11:45:11 rene kernel: [ 11.158819]
    Jan 1 11:45:11 rene kernel: [ 11.158820] ~~~~stastakey:groupkey
    Jan 1 11:45:11 rene kernel: [ 11.158823] ==> rtw_set_key algorithm(4),keyid(1),key_mask(2)
    Jan 1 11:45:11 rene kernel: [ 11.161355] OnAction_back
    Jan 1 11:45:11 rene kernel: [ 11.161360] OnAction_back, action=0
    Jan 1 11:45:11 rene kernel: [ 11.161363] issue_action_BA, category=3, action=1, status=0
    Jan 1 11:45:11 rene wpa_action: WPA_IFACE=wlan0 WPA_ACTION=CONNECTED
    Jan 1 11:45:11 rene wpa_action: WPA_ID=0 WPA_ID_STR= WPA_CTRL_DIR=/var/run/wpa_supplicant
    Jan 1 11:45:11 rene wpa_action: ifup wlan0=default
    Jan 1 11:45:11 rene avahi-daemon[1560]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.0.2.
    Jan 1 11:45:11 rene avahi-daemon[1560]: New relevant interface wlan0.IPv4 for mDNS.
    Jan 1 11:45:11 rene avahi-daemon[1560]: Registering new address record for 192.168.0.2 on wlan0.IPv4.
    Jan 1 11:45:11 rene kernel: [ 11.280307] init: vdr-frontend main process (1553) terminated with status 250
    Jan 1 11:45:11 rene kernel: [ 11.280346] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:11 rene avahi-daemon[1560]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::fa1a:67ff:fe26:b7bd.
    Jan 1 11:45:11 rene avahi-daemon[1560]: New relevant interface wlan0.IPv6 for mDNS.
    Jan 1 11:45:11 rene avahi-daemon[1560]: Registering new address record for fe80::fa1a:67ff:fe26:b7bd on wlan0.*.
    Jan 1 11:45:12 rene wpa_action: creating sendsigs omission pidfile: /run/sendsigs.omit.d/wpasupplicant.wpa_supplicant.wlan0.pid
    Jan 1 11:45:12 rene wpa_action: bssid=00:16:0a:1e:79:b8
    Jan 1 11:45:12 rene wpa_action: ssid=10001
    Jan 1 11:45:12 rene wpa_action: id=0
    Jan 1 11:45:12 rene wpa_action: mode=station
    Jan 1 11:45:12 rene wpa_action: pairwise_cipher=CCMP
    Jan 1 11:45:12 rene wpa_action: group_cipher=CCMP
    Jan 1 11:45:12 rene wpa_action: key_mgmt=WPA2-PSK
    Jan 1 11:45:12 rene wpa_action: wpa_state=COMPLETED
    Jan 1 11:45:12 rene wpa_action: ip_address=192.168.0.2
    Jan 1 11:45:12 rene avahi-mounter[1561]: Resolved type _nfs._tcp on rene.local
    Jan 1 11:45:12 avahi-mounter[1561]: last message repeated 3 times
    Jan 1 11:45:12 rene vdr-sxfe[1823]: [1823] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:12 rene vdr-sxfe[1823]: [1823] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:12 rene vdr-sxfe[1823]: [1823] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:12 rene vdr-sxfe[1823]: [1823] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:12 rene avahi-mounter[1561]: Resolved type _nfs._tcp on rene.local
    Jan 1 11:45:13 avahi-mounter[1561]: last message repeated 3 times
    Jan 1 11:45:13 rene kernel: [ 12.445444] init: vdr-frontend main process (1823) terminated with status 250
    Jan 1 11:45:13 rene kernel: [ 12.445484] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:13 rene vdr-sxfe[1882]: [1882] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:13 rene vdr-sxfe[1882]: [1882] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:13 rene vdr-sxfe[1882]: [1882] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:13 rene vdr-sxfe[1882]: [1882] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:14 rene kernel: [ 13.446984] init: vdr-frontend main process (1882) terminated with status 250
    Jan 1 11:45:14 rene kernel: [ 13.447022] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:14 rene vdr-sxfe[1922]: [1922] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:14 rene vdr-sxfe[1922]: [1922] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:14 rene vdr-sxfe[1922]: [1922] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:14 rene vdr-sxfe[1922]: [1922] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:15 rene kernel: [ 14.447440] init: vdr-frontend main process (1922) terminated with status 250
    Jan 1 11:45:15 rene kernel: [ 14.447478] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:15 rene vdr-sxfe[1957]: [1957] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:15 rene vdr-sxfe[1957]: [1957] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:15 rene vdr-sxfe[1957]: [1957] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:15 rene vdr-sxfe[1957]: [1957] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:15 rene kernel: [ 15.432125] init: vdr-frontend main process (1957) terminated with status 250
    Jan 1 11:45:15 rene kernel: [ 15.432162] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:16 rene vdr-sxfe[1972]: [1972] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:16 rene vdr-sxfe[1972]: [1972] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:16 rene vdr-sxfe[1972]: [1972] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:16 rene vdr-sxfe[1972]: [1972] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:16 rene kernel: [ 16.416271] init: vdr-frontend main process (1972) terminated with status 250
    Jan 1 11:45:16 rene kernel: [ 16.416310] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:17 rene kernel: [ 16.757037] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
    Jan 1 11:45:17 rene kernel: [ 16.757041] ==> rssi_level:2, rate_bitmap:0x000ff000
    Jan 1 11:45:17 rene vdr-sxfe[1987]: [1987] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:17 rene vdr-sxfe[1987]: [1987] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:17 rene vdr-sxfe[1987]: [1987] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:17 rene vdr-sxfe[1987]: [1987] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:17 rene kernel: [ 17.396483] init: vdr-frontend main process (1987) terminated with status 250
    Jan 1 11:45:17 rene kernel: [ 17.396513] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:18 rene vdr-sxfe[2002]: [2002] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:18 rene vdr-sxfe[2002]: [2002] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:18 rene vdr-sxfe[2002]: [2002] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:18 rene vdr-sxfe[2002]: [2002] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:18 rene kernel: [ 18.314215] init: vdr-frontend main process (2002) terminated with status 250
    Jan 1 11:45:18 rene kernel: [ 18.314244] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:19 rene vdr-sxfe[2017]: [2017] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:19 rene vdr-sxfe[2017]: [2017] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:19 rene vdr-sxfe[2017]: [2017] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:19 rene vdr-sxfe[2017]: [2017] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:19 rene kernel: [ 19.249236] init: vdr-frontend main process (2017) terminated with status 250
    Jan 1 11:45:19 rene kernel: [ 19.249264] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:20 rene vdr-sxfe[2032]: [2032] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:20 rene vdr-sxfe[2032]: [2032] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:20 rene vdr-sxfe[2032]: [2032] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:20 rene vdr-sxfe[2032]: [2032] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:21 rene ntpdate[1819]: step time server 91.189.89.199 offset 0.645775 sec
    Jan 1 11:45:21 rene kernel: [ 20.200326] init: vdr-frontend main process (2032) terminated with status 250
    Jan 1 11:45:21 rene kernel: [ 20.200353] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:21 rene kernel: [ 20.432028] wlan0: no IPv6 routers present
    Jan 1 11:45:22 rene vdr-sxfe[2049]: [2049] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:22 rene vdr-sxfe[2049]: [2049] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:22 rene vdr-sxfe[2049]: [2049] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:22 rene vdr-sxfe[2049]: [2049] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:22 rene kernel: [ 21.184806] init: vdr-frontend main process (2049) terminated with status 250
    Jan 1 11:45:22 rene kernel: [ 21.184834] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:22 rene vdr-sxfe[2064]: [2064] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:22 rene vdr-sxfe[2064]: [2064] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:22 rene vdr-sxfe[2064]: [2064] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:22 rene vdr-sxfe[2064]: [2064] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:23 rene kernel: [ 22.140031] init: vdr-frontend main process (2064) terminated with status 250
    Jan 1 11:45:23 rene kernel: [ 22.140070] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:24 rene vdr-sxfe[2079]: [2079] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:24 rene vdr-sxfe[2079]: [2079] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:24 rene vdr-sxfe[2079]: [2079] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:24 rene vdr-sxfe[2079]: [2079] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:24 rene kernel: [ 23.157849] init: vdr-frontend main process (2079) terminated with status 250
    Jan 1 11:45:24 rene kernel: [ 23.157887] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:25 rene vdr-sxfe[2094]: [2094] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:25 rene vdr-sxfe[2094]: [2094] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:25 rene vdr-sxfe[2094]: [2094] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:25 rene vdr-sxfe[2094]: [2094] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:25 rene kernel: [ 24.192438] init: vdr-frontend main process (2094) terminated with status 250
    Jan 1 11:45:25 rene kernel: [ 24.192476] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:25 rene kernel: [ 24.773166] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
    Jan 1 11:45:25 rene kernel: [ 24.773169] ==> rssi_level:3, rate_bitmap:0x000ff015
    Jan 1 11:45:26 rene vdr-sxfe[2109]: [2109] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:26 rene vdr-sxfe[2109]: [2109] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:26 rene vdr-sxfe[2109]: [2109] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:26 rene vdr-sxfe[2109]: [2109] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:26 rene kernel: [ 25.210187] init: vdr-frontend main process (2109) terminated with status 250
    Jan 1 11:45:26 rene kernel: [ 25.210225] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:27 rene vdr-sxfe[2124]: [2124] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:27 rene vdr-sxfe[2124]: [2124] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:27 rene vdr-sxfe[2124]: [2124] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:27 rene vdr-sxfe[2124]: [2124] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:27 rene kernel: [ 26.207232] init: vdr-frontend main process (2124) terminated with status 250
    Jan 1 11:45:27 rene kernel: [ 26.207260] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:28 rene vdr-sxfe[2139]: [2139] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:28 rene vdr-sxfe[2139]: [2139] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:28 rene vdr-sxfe[2139]: [2139] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:28 rene vdr-sxfe[2139]: [2139] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:28 rene kernel: [ 27.179202] init: vdr-frontend main process (2139) terminated with status 250
    Jan 1 11:45:28 rene kernel: [ 27.179242] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:29 rene vdr-sxfe[2154]: [2154] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:29 rene vdr-sxfe[2154]: [2154] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:29 rene vdr-sxfe[2154]: [2154] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:29 rene vdr-sxfe[2154]: [2154] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:29 rene kernel: [ 28.163621] init: vdr-frontend main process (2154) terminated with status 250
    Jan 1 11:45:29 rene kernel: [ 28.163660] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:30 rene vdr-sxfe[2169]: [2169] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:30 rene vdr-sxfe[2169]: [2169] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:30 rene vdr-sxfe[2169]: [2169] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:30 rene vdr-sxfe[2169]: [2169] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:30 rene kernel: [ 29.181370] init: vdr-frontend main process (2169) terminated with status 250
    Jan 1 11:45:30 rene kernel: [ 29.181408] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:31 rene vdr-sxfe[2184]: [2184] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:31 rene vdr-sxfe[2184]: [2184] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:31 rene vdr-sxfe[2184]: [2184] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:31 rene vdr-sxfe[2184]: [2184] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:31 rene kernel: [ 30.199290] init: vdr-frontend main process (2184) terminated with status 250
    Jan 1 11:45:31 rene kernel: [ 30.199329] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:32 rene vdr-sxfe[2199]: [2199] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:32 rene vdr-sxfe[2199]: [2199] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:32 rene vdr-sxfe[2199]: [2199] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:32 rene vdr-sxfe[2199]: [2199] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:32 rene kernel: [ 31.217092] init: vdr-frontend main process (2199) terminated with status 250
    Jan 1 11:45:32 rene kernel: [ 31.217131] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:33 rene vdr-sxfe[2214]: [2214] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:33 rene vdr-sxfe[2214]: [2214] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:33 rene vdr-sxfe[2214]: [2214] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:33 rene vdr-sxfe[2214]: [2214] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:33 rene kernel: [ 32.234981] init: vdr-frontend main process (2214) terminated with status 250
    Jan 1 11:45:33 rene kernel: [ 32.235019] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:34 rene vdr-sxfe[2229]: [2229] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:34 rene vdr-sxfe[2229]: [2229] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:34 rene vdr-sxfe[2229]: [2229] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:34 rene vdr-sxfe[2229]: [2229] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:34 rene kernel: [ 33.219431] init: vdr-frontend main process (2229) terminated with status 250
    Jan 1 11:45:34 rene kernel: [ 33.219470] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:35 rene vdr-sxfe[2244]: [2244] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:35 rene vdr-sxfe[2244]: [2244] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:35 rene vdr-sxfe[2244]: [2244] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:35 rene vdr-sxfe[2244]: [2244] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:35 rene kernel: [ 34.220556] init: vdr-frontend main process (2244) terminated with status 250
    Jan 1 11:45:35 rene kernel: [ 34.220595] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:36 rene vdr-sxfe[2259]: [2259] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:36 rene vdr-sxfe[2259]: [2259] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:36 rene vdr-sxfe[2259]: [2259] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:36 rene vdr-sxfe[2259]: [2259] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:36 rene kernel: [ 35.255209] init: vdr-frontend main process (2259) terminated with status 250
    Jan 1 11:45:36 rene kernel: [ 35.255247] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:37 rene vdr-sxfe[2276]: [2276] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:37 rene vdr-sxfe[2276]: [2276] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:37 rene vdr-sxfe[2276]: [2276] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:37 rene vdr-sxfe[2276]: [2276] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:37 rene kernel: [ 36.256265] init: vdr-frontend main process (2276) terminated with status 250
    Jan 1 11:45:37 rene kernel: [ 36.256304] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:38 rene vdr-sxfe[2291]: [2291] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:38 rene vdr-sxfe[2291]: [2291] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:38 rene vdr-sxfe[2291]: [2291] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:38 rene vdr-sxfe[2291]: [2291] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:38 rene kernel: [ 37.257336] init: vdr-frontend main process (2291) terminated with status 250
    Jan 1 11:45:38 rene kernel: [ 37.257375] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:39 rene vdr-sxfe[2306]: [2306] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:39 rene vdr-sxfe[2306]: [2306] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:39 rene vdr-sxfe[2306]: [2306] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:39 rene vdr-sxfe[2306]: [2306] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:39 rene kernel: [ 38.308027] init: vdr-frontend main process (2306) terminated with status 250
    Jan 1 11:45:39 rene kernel: [ 38.308065] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:40 rene vdr-sxfe[2321]: [2321] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:40 rene vdr-sxfe[2321]: [2321] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:40 rene vdr-sxfe[2321]: [2321] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:40 rene vdr-sxfe[2321]: [2321] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:40 rene kernel: [ 39.359700] init: vdr-frontend main process (2321) terminated with status 250
    Jan 1 11:45:40 rene kernel: [ 39.359738] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:41 rene vdr-sxfe[2545]: [2545] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:41 rene vdr-sxfe[2545]: [2545] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:41 rene vdr-sxfe[2545]: [2545] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:41 rene vdr-sxfe[2545]: [2545] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:41 rene kernel: [ 40.425740] init: vdr-frontend main process (2545) terminated with status 250
    Jan 1 11:45:41 rene kernel: [ 40.425778] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:42 rene vdr-sxfe[2764]: [2764] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:42 rene vdr-sxfe[2764]: [2764] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:42 rene vdr-sxfe[2764]: [2764] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:42 rene vdr-sxfe[2764]: [2764] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:42 rene kernel: [ 41.428885] init: vdr-frontend main process (2764) terminated with status 250
    Jan 1 11:45:42 rene kernel: [ 41.428924] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:43 rene vdr-sxfe[2779]: [2779] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:43 rene vdr-sxfe[2779]: [2779] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:43 rene vdr-sxfe[2779]: [2779] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:43 rene vdr-sxfe[2779]: [2779] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:43 rene kernel: [ 42.463312] init: vdr-frontend main process (2779) terminated with status 250
    Jan 1 11:45:43 rene kernel: [ 42.463351] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:44 rene vdr-sxfe[2794]: [2794] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:44 rene vdr-sxfe[2794]: [2794] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:44 rene vdr-sxfe[2794]: [2794] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:44 rene vdr-sxfe[2794]: [2794] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:44 rene kernel: [ 43.464457] init: vdr-frontend main process (2794) terminated with status 250
    Jan 1 11:45:44 rene kernel: [ 43.464496] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:44 rene vdr: [2808] VDR version 2.0.3 started
    Jan 1 11:45:44 rene vdr: [2808] codeset is 'UTF-8' - known
    Jan 1 11:45:45 rene vdr: [2808] found 28 locales in /usr/share/locale
    Jan 1 11:45:45 rene vdr: [2808] loading plugin: /usr/lib/vdr/plugins/libvdr-xineliboutput.so.2.0.0
    Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/setup.conf
    Jan 1 11:45:45 rene vdr: [2808] ERROR: unknown config parameter: DumpNaluFill = 1
    Jan 1 11:45:45 rene vdr: [2808] ERROR: unknown config parameter: DumpNaluFill = 1
    Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/sources.conf
    Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/diseqc.conf
    Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/scr.conf
    Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/channels.conf
    Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/timers.conf
    Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/commands.conf
    Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/reccmds.conf
    Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/svdrphosts.conf
    Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/remote.conf
    Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/keymacros.conf
    Jan 1 11:45:45 rene vdr: [2808] ERROR: unknown plugin 'yaepghd'
    Jan 1 11:45:45 rene vdr: [2808] ERROR: empty key macro
    Jan 1 11:45:45 rene vdr: [2808] registered source parameters for 'A - ATSC'
    Jan 1 11:45:45 rene vdr: [2808] registered source parameters for 'C - DVB-C'
    Jan 1 11:45:45 rene vdr: [2808] registered source parameters for 'S - DVB-S'
    Jan 1 11:45:45 rene vdr: [2808] registered source parameters for 'T - DVB-T'
    Jan 1 11:45:45 rene vdr: [2814] video directory scanner thread started (pid=2808, tid=2814, prio=high)
    Jan 1 11:45:45 rene vdr: [2808] probing /dev/dvb/adapter0/frontend0
    Jan 1 11:45:45 rene vdr: [2808] creating cDvbDevice
    Jan 1 11:45:45 rene vdr: [2808] new device number 1
    Jan 1 11:45:45 rene vdr: [2816] epg data reader thread started (pid=2808, tid=2816, prio=high)
    Jan 1 11:45:45 rene vdr: [2816] reading EPG data from /var/cache/vdr/epg.data
    Jan 1 11:45:45 rene vdr: [2815] video directory scanner thread started (pid=2808, tid=2815, prio=high)
    Jan 1 11:45:45 rene vdr: [2815] video directory scanner thread ended (pid=2808, tid=2815)
    Jan 1 11:45:45 rene vdr: [2814] video directory scanner thread ended (pid=2808, tid=2814)
    Jan 1 11:45:45 rene vdr: [2816] epg data reader thread ended (pid=2808, tid=2816)
    Jan 1 11:45:45 rene vdr-sxfe[2810]: [2810] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:45 rene vdr-sxfe[2810]: [2810] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
    Jan 1 11:45:45 rene vdr-sxfe[2810]: [2810] [input_vdr] Can't connect to tcp://127.0.0.1:37890
    Jan 1 11:45:45 rene vdr-sxfe[2810]: [2810] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
    Jan 1 11:45:45 rene vdr: [2808] DVB API version is 0x0504 (VDR was built with 0x0504)
    Jan 1 11:45:45 rene vdr: [2808] frontend 0/0 provides DVB-C with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 ("Philips TDA10023 DVB-C")
    Jan 1 11:45:45 rene vdr: [2825] tuner on frontend 0/0 thread started (pid=2808, tid=2825, prio=high)
    Jan 1 11:45:45 rene vdr: [2825] cTimeMs: using monotonic clock (resolution is 1 ns)
    Jan 1 11:45:45 rene vdr: [2808] found 1 DVB device
    Jan 1 11:45:45 rene vdr: [2826] section handler thread started (pid=2808, tid=2826, prio=low)
    Jan 1 11:45:45 rene vdr: [2808] initializing plugin: xineliboutput (1.0.90-cvs): X11/xine-lib Ausgabe-Plugin
    Jan 1 11:45:45 rene vdr: [2808] new device number 9
    Jan 1 11:45:45 rene vdr: [2808] [xine..put] cTimePts: clock_gettime(CLOCK_MONOTONIC): clock resolution 0 us
    Jan 1 11:45:45 rene vdr: [2808] [xine..put] cTimePts: using monotonic clock
    Jan 1 11:45:45 rene vdr: [2808] [xine..put] RTP SSRC: 0x562b3be8
    Jan 1 11:45:45 rene vdr: [2808] setting primary device to 2
    Jan 1 11:45:45 rene vdr: [2808] assuming manual start of VDR
    Jan 1 11:45:45 rene vdr: [2808] skin "anthra_1920_FSE" not available - using "lcars" instead
    Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/themes/lcars-default.theme
    Jan 1 11:45:45 rene vdr: [2808] starting plugin: xineliboutput
    Jan 1 11:45:45 rene vdr: [2827] [xine..put] Have CAP_SYS_NICE capability
    Jan 1 11:45:45 rene vdr: [2828] Remote decoder/display server (cXinelibServer) thread started (pid=2808, tid=2828, prio=high)
    Jan 1 11:45:45 rene vdr: [2828] [xine..put] Have CAP_SYS_NICE capability
    Jan 1 11:45:45 rene vdr: [2828] [xine..put] cXinelibServer priority set successful SCHED_RR 2 [1,99]
    Jan 1 11:45:45 rene vdr: [2828] [xine..put] Listening on port 37890
    Jan 1 11:45:45 rene vdr: [2828] [xine..put] Listening for UDP broadcasts on port 37890
    Jan 1 11:45:45 rene vdr: [2828] [discovery] BROADCAST: VDR xineliboutput DISCOVERY 1.0#015#012Server port: 37890#015#012Server version: xineliboutput-1.0.90-cvs#015#012#015
    Jan 1 11:45:45 rene kernel: [ 44.498906] init: vdr-frontend main process (2810) terminated with status 250
    Jan 1 11:45:45 rene kernel: [ 44.498945] init: vdr-frontend main process ended, respawning
    Jan 1 11:45:45 rene vdr: [2808] [xine..put] cXinelibDevice::StartDevice(): Device started
    Jan 1 11:45:45 rene vdr: [2808] skin "anthra_1920_FSE" not available - using "lcars" instead
    Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/themes/lcars-default.theme
    Jan 1 11:45:45 rene vdr: [2808] remote control KBD - keys known
    Jan 1 11:45:45 rene vdr: [2808] switching to channel 6
    Jan 1 11:45:45 rene vdr: [2830] KBD remote control thread started (pid=2808, tid=2830, prio=high)
    Jan 1 11:45:45 rene vdr: [2808] OSD size changed to 1920x1080 @ 1
    Jan 1 11:45:45 rene vdr: [2808] [xine..put] cXinelibOsd::CanHandleAreas(): Device does not support ARGB
    Jan 1 11:45:45 rene vdr: [2831] receiver on device 1 thread started (pid=2808, tid=2831, prio=high)
    Jan 1 11:45:45 rene vdr: [2833] TS buffer on device 1 thread started (pid=2808, tid=2833, prio=high)
    Jan 1 11:45:46 rene vdr: [2831] [xine..put] Detected video size 720x576
    Jan 1 11:45:46 rene vdr: [2828] [xine..put] Client 0 connected: 127.0.0.1:45010
    Jan 1 11:45:46 rene vdr: [2828] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf
    Jan 1 11:45:46 rene vdr: [2828] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
    Jan 1 11:45:46 rene vdr: [2828] [xine..put] Client 1 connected: 127.0.0.1:45011
    Jan 1 11:45:46 rene vdr: [2828] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf
    Jan 1 11:45:46 rene vdr: [2828] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
    Jan 1 11:45:46 rene vdr: [2828] [xine..put] Data connection (TCP) requested
    Jan 1 11:45:46 rene vdr: [2828] [xine..put] cBackgroundWriterI initialized (buffer 2048 kb)
    Jan 1 11:45:46 rene vdr: [2828] [xine..put] cTcpWriter initialized (buffer 2048 kb)
    Jan 1 11:45:46 rene vdr-sxfe[2836]: [2851] [console] read_key: read(stdin) failed: no stdin



    und die setup.conf

    Files

    • setup.conf

      (17.58 kB, downloaded 19 times, last: )

    VDR 1:
    Mainboard: Foxconn 45GM
    Prozessor: Core2Duo E6600
    Grafik: Geforce 210 Low Profile (passiv)
    DVB-Karte: Skystar HD/SkyStar HD 2
    Festplatten: 60 GB SSD als Boot/ 1 TB HDD als sdb gemountet als /srv
    Distri: Yavdr 0.6
    zusätzliche Pakete: yaepghd, istreamdev, Filezilla Client
    ----------------------------------------------------------------------
    VDR 2:


    Raspberry PI 512 MB
    16 GB SD Karte
    MLD 4 als Streamdev Client am VDR 1 für Gäste


    ------------------------------------------------------------------------


    (Linux ist ein System das durch Schmerz, Frust und Leid erlernt werden muss, aber wenn es einmal läuft macht es tierisch viel Spaß)

  • Setz mal bitte im WFE das Ausgabeplugin erneut und poste ein komplettes, lesbares syslog: http://www.yavdr.org/documentation/0.5/de/ch06s01.html


    Dass dvbsddevice und dvbhddevice in der order.conf aktiv sind passt überhaupt nicht.

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

  • hier mal die syslog


    http://paste.ubuntu.com/6672835/



    hab das ausgabeplugin auf xine und wieder auf xinlibout gesetzt

    VDR 1:
    Mainboard: Foxconn 45GM
    Prozessor: Core2Duo E6600
    Grafik: Geforce 210 Low Profile (passiv)
    DVB-Karte: Skystar HD/SkyStar HD 2
    Festplatten: 60 GB SSD als Boot/ 1 TB HDD als sdb gemountet als /srv
    Distri: Yavdr 0.6
    zusätzliche Pakete: yaepghd, istreamdev, Filezilla Client
    ----------------------------------------------------------------------
    VDR 2:


    Raspberry PI 512 MB
    16 GB SD Karte
    MLD 4 als Streamdev Client am VDR 1 für Gäste


    ------------------------------------------------------------------------


    (Linux ist ein System das durch Schmerz, Frust und Leid erlernt werden muss, aber wenn es einmal läuft macht es tierisch viel Spaß)

  • Hast du noch Plugins aus anderen Quellen installiert als dem yaVDR-PPA?
    Was sagt denn apt-cache zu den Versionsnummern?

    Code
    1. apt-cache policy vdr vdr-plugin-dbus2vdr vdr-plugin-xineliboutput yavdr-essential

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

  • Installiert: 2.0.3-3yavdr0~0.5
    Kandidat: 2.0.3-3yavdr0~0.5
    Versionstabelle:
    *** 2.0.3-3yavdr0~0.5 0
    500 http://ppa.launchpad.net/yavdr/stable-vdr/ubuntu/ precise/main amd64 Packages
    100 /var/lib/dpkg/status
    1.7.22-1 0
    500 http://de.archive.ubuntu.com/ubuntu/ precise/universe amd64 Packages
    vdr-plugin-dbus2vdr:
    Installiert: 20131025104828stable-0yavdr0~precise
    Kandidat: 20131025104828stable-0yavdr0~precise
    Versionstabelle:
    *** 20131025104828stable-0yavdr0~precise 0
    500 http://ppa.launchpad.net/yavdr/stable-vdr/ubuntu/ precise/main amd64 Packages
    100 /var/lib/dpkg/status
    vdr-plugin-xineliboutput:
    Installiert: 1.0.7+cvs20130117-1yavdr6~precise
    Kandidat: 1.0.7+cvs20130117-1yavdr6~precise
    Versionstabelle:
    *** 1.0.7+cvs20130117-1yavdr6~precise 0
    500 http://ppa.launchpad.net/yavdr/stable-vdr/ubuntu/ precise/main amd64 Packages
    100 /var/lib/dpkg/status
    1.0.7+cvs20111211.1625-1 0
    500 http://de.archive.ubuntu.com/ubuntu/ precise/universe amd64 Packages
    yavdr-essential:
    Installiert: 20130905102221stable-0yavdr0~precise
    Kandidat: 20130905102221stable-0yavdr0~precise
    Versionstabelle:
    *** 20130905102221stable-0yavdr0~precise 0
    500 http://ppa.launchpad.net/yavdr/stable-yavdr/ubuntu/ precise/main amd64 Packages
    100 /var/lib/dpkg/status




    eigentlich nicht hoffe ich

    VDR 1:
    Mainboard: Foxconn 45GM
    Prozessor: Core2Duo E6600
    Grafik: Geforce 210 Low Profile (passiv)
    DVB-Karte: Skystar HD/SkyStar HD 2
    Festplatten: 60 GB SSD als Boot/ 1 TB HDD als sdb gemountet als /srv
    Distri: Yavdr 0.6
    zusätzliche Pakete: yaepghd, istreamdev, Filezilla Client
    ----------------------------------------------------------------------
    VDR 2:


    Raspberry PI 512 MB
    16 GB SD Karte
    MLD 4 als Streamdev Client am VDR 1 für Gäste


    ------------------------------------------------------------------------


    (Linux ist ein System das durch Schmerz, Frust und Leid erlernt werden muss, aber wenn es einmal läuft macht es tierisch viel Spaß)

  • Ok, die Paketversionen sollten passen.
    Wie sieht die /etc/default/vdr aus? Darf der VDR starten?


    Mach mal folgendes:

    Code
    1. sudo stop vdr-frontend
    2. sudo stop vdr
    3. sudo start vdr
    4. # mindestens 30 Sekunden warten
    5. pastebinit /var/log/syslog

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

  • und da beginnen die probleme:


    stop vdr-frontend funktioniert noch,


    stop vdr bringt
    stop vdr
    stop: Unknown instance:



    die /etc/default/vdr.conf



    # Change to 1 to enable vdr's init-script
    ENABLED=1


    # Change this to 1 if you want vdr to be able to shutdown the
    # computer
    ENABLE_SHUTDOWN=1




    # Options that will be passed to vdr's commandline
    # for example: OPTIONS="-w 15"
    OPTIONS="-w 0"




    also starten müsste er eigentlich dürfen




    http://paste.ubuntu.com/6673040/

    VDR 1:
    Mainboard: Foxconn 45GM
    Prozessor: Core2Duo E6600
    Grafik: Geforce 210 Low Profile (passiv)
    DVB-Karte: Skystar HD/SkyStar HD 2
    Festplatten: 60 GB SSD als Boot/ 1 TB HDD als sdb gemountet als /srv
    Distri: Yavdr 0.6
    zusätzliche Pakete: yaepghd, istreamdev, Filezilla Client
    ----------------------------------------------------------------------
    VDR 2:


    Raspberry PI 512 MB
    16 GB SD Karte
    MLD 4 als Streamdev Client am VDR 1 für Gäste


    ------------------------------------------------------------------------


    (Linux ist ein System das durch Schmerz, Frust und Leid erlernt werden muss, aber wenn es einmal läuft macht es tierisch viel Spaß)

  • Das ist der Fehler - er hat keine Zugriffsrechte auf das Aufnahmeverzeichnis:

    Code
    1. Jan 1 13:06:34 rene vdr: [4986] ERROR: can't access /srv/vdr/video.00

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

  • oh alles klar



    reicht einchown -R vdr:vdr /srv


    oder chown -R vdr:vdr /srv/video.00 ?

    VDR 1:
    Mainboard: Foxconn 45GM
    Prozessor: Core2Duo E6600
    Grafik: Geforce 210 Low Profile (passiv)
    DVB-Karte: Skystar HD/SkyStar HD 2
    Festplatten: 60 GB SSD als Boot/ 1 TB HDD als sdb gemountet als /srv
    Distri: Yavdr 0.6
    zusätzliche Pakete: yaepghd, istreamdev, Filezilla Client
    ----------------------------------------------------------------------
    VDR 2:


    Raspberry PI 512 MB
    16 GB SD Karte
    MLD 4 als Streamdev Client am VDR 1 für Gäste


    ------------------------------------------------------------------------


    (Linux ist ein System das durch Schmerz, Frust und Leid erlernt werden muss, aber wenn es einmal läuft macht es tierisch viel Spaß)

  • a) Ich verstehe nicht warum man unbedingt an den Berechtigungen von Ordnern herumspielen muss wenn man keine Ahnung hat (und dann noch eine irreführende vermutete Ursache angibt, denn das Problem ist garantiert nicht durch ein dist-upgrade verursacht worden).
    b) Der User VDR braucht Lese- und Schreibrechte für /srv/vdr/video.00 und er muss auf die übergeordneten Verzeichnisse mindestens lesend zugreifen dürfen.
    Das sollte also falls du nich noch mit chmod rumgespielt hast alles gerade biegen:

    Code
    1. chown -R vdr:vdr /srv

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

  • dann weiß ich woher das kommt, mir war meine Medienplatte abgeraucht, ich hatte ne Image gezogen, bzw. die Ordner auf ner anderen Platte neu erstellt und vergessen die Rechte für den VDR zu setzen, nun ist alles wieder da und alles beim alten.



    Danke dir Seahawk.


    Sorry deine Zeit verschwendet zu haben.

    VDR 1:
    Mainboard: Foxconn 45GM
    Prozessor: Core2Duo E6600
    Grafik: Geforce 210 Low Profile (passiv)
    DVB-Karte: Skystar HD/SkyStar HD 2
    Festplatten: 60 GB SSD als Boot/ 1 TB HDD als sdb gemountet als /srv
    Distri: Yavdr 0.6
    zusätzliche Pakete: yaepghd, istreamdev, Filezilla Client
    ----------------------------------------------------------------------
    VDR 2:


    Raspberry PI 512 MB
    16 GB SD Karte
    MLD 4 als Streamdev Client am VDR 1 für Gäste


    ------------------------------------------------------------------------


    (Linux ist ein System das durch Schmerz, Frust und Leid erlernt werden muss, aber wenn es einmal läuft macht es tierisch viel Spaß)