keine HD-Sender im VDR und reelscan

Hi

mit Hilfe der leute im Portal habe ich meine DD Cine S2 v6 endlich ans laufen bekommen.

Nur erkennt reelscan keine HD Sender und wenn ich welche im Netz suche und in die channels.conf eintrage kommt kein Signal.

channels.conf

Zitat

arte HD;ZDFvision:11361:hC23:S19.2E:22000:6210:6221=deu,6222=fra;6220=deu:6230:0:11120:1:1011:0
Das Erste HD;ARD:11362:hC23:S19.2E:22000:6010:6020=deu;6022=deu:6030:0:11100:1:1011:0
ZDF HD;ZDFvision:11362:hC23:S19.2E:22000:6110:6120=deu;6122=deu:6130:0:11110:1:1011:0
ANIXE HD;BetaDigital:11302:hC23:S19.2E:22000:255:0;259=deu:0:0:4900:1:1007:0
ASTRA HD+;BetaDigital:11302:hC23:S19.2E:22000:511:0;515=deu:0:0:4901:1:1007:0
EinsFestival HD;ARD:12422:hC34:S19.2E:27500:1601:1602=deu;1606=deu:0:0:28396:1:1201:0
...

Alles anzeigen

vdr:

vdr-1.6.0_p2-r11.ebuild

/etc/conf.d/modules

Zitat

modules="lirc_serial ddbridge ngene dvb_core b2c2-flexcop-pci"

hab media-video/vdr-1.7.33-r1 aus dem overlay installiert

nun bekomme ich beim starten von vdr fehler

Zitat

~ # /etc/init.d/vdr start
* Preparing start of vdr:
* Skipped these plugins:
* Not Existing: reelchannelscan xineliboutput mplayer text2skin femon admin
* Waiting for DVB devices ... [ ok ]
* Checking config files ... [ ok ]
* Starting vdr ... [ ok ]
* Waiting for working vdr ... [ ok ]
* VDR errors from /var/log/messages:
* ERROR: invalid primary device number: 3
* ERROR: no primary device found - using first device!
* ERROR: no OSD provider available - using dummy OSD!
* Starting vdr watchdog ...

Alles anzeigen

syslog-ng

Zitat

Jan 2 23:18:43 sys4 /etc/init.d/vdr[4304]: Skipped these plugins:
Jan 2 23:18:43 sys4 /etc/init.d/vdr[4305]: Not Existing: reelchannelscan xineliboutput mplayer text2skin femon admin
Jan 2 23:18:43 sys4 vdr: [4352] VDR version 1.7.33 started
Jan 2 23:18:43 sys4 vdr: [4352] switched to user 'vdr'
Jan 2 23:18:43 sys4 vdr: [4352] running as daemon (tid=4352)
Jan 2 23:18:43 sys4 vdr: [4352] codeset is 'ISO-8859-1' - known
Jan 2 23:18:43 sys4 vdr: [4352] found 0 locales in /usr/share/locale
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'deu,ger'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'slv,slo'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'ita'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'dut,nla,nld'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'prt'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'fra,fre'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'nor'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'fin,suo'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'pol'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'esl,spa'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'ell,gre'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'sve,swe'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'rom,rum'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'hun'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'cat,cln'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'rus'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'srb,srp,scr,scc'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'hrv'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'est'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'dan'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'cze,ces'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'tur'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'ukr'
Jan 2 23:18:43 sys4 vdr: [4352] no locale for language code 'ara'
Jan 2 23:18:43 sys4 vdr: [4352] loading /etc/vdr/setup.conf
Jan 2 23:18:43 sys4 vdr: [4352] ERROR: unknown config parameter: PrimaryLimit = 0
Jan 2 23:18:43 sys4 vdr: [4352] loading /etc/vdr/sources.conf
Jan 2 23:18:43 sys4 vdr: [4352] loading /etc/vdr/diseqc.conf
Jan 2 23:18:43 sys4 vdr: [4352] loading /etc/vdr/scr.conf
Jan 2 23:18:43 sys4 vdr: [4352] loading /etc/vdr/channels.conf
Jan 2 23:18:43 sys4 vdr: New default svdrp port 6419!
Jan 2 23:18:43 sys4 vdr: [4352] loading /etc/vdr/timers.conf
Jan 2 23:18:43 sys4 vdr: [4352] loading /etc/vdr/commands.conf
Jan 2 23:18:43 sys4 vdr: [4352] loading /etc/vdr/reccmds.conf
Jan 2 23:18:43 sys4 vdr: [4352] loading /etc/vdr/svdrphosts.conf
Jan 2 23:18:43 sys4 vdr: [4352] loading /etc/vdr/remote.conf
Jan 2 23:18:43 sys4 vdr: [4352] loading /etc/vdr/keymacros.conf
Jan 2 23:18:43 sys4 vdr: [4352] registered source parameters for 'A - ATSC'
Jan 2 23:18:43 sys4 vdr: [4352] registered source parameters for 'C - DVB-C'
Jan 2 23:18:43 sys4 vdr: [4352] registered source parameters for 'S - DVB-S'
Jan 2 23:18:43 sys4 vdr: [4352] registered source parameters for 'T - DVB-T'
Jan 2 23:18:43 sys4 vdr: [4352] probing /dev/dvb/adapter0/frontend0
Jan 2 23:18:43 sys4 vdr: [4352] creating cDvbDevice
Jan 2 23:18:43 sys4 vdr: [4352] new device number 1
Jan 2 23:18:43 sys4 vdr: [4367] video directory scanner thread started (pid=4352, tid=4367, prio=high)
Jan 2 23:18:43 sys4 vdr: [4367] video directory scanner thread ended (pid=4352, tid=4367)
Jan 2 23:18:43 sys4 vdr: [4368] epg data reader thread started (pid=4352, tid=4368, prio=high)
Jan 2 23:18:43 sys4 vdr: [4368] reading EPG data from /home/server/svr4/vdr/epg.data
Jan 2 23:18:43 sys4 vdr: [4366] video directory scanner thread started (pid=4352, tid=4366, prio=high)
Jan 2 23:18:43 sys4 vdr: [4366] video directory scanner thread ended (pid=4352, tid=4366)
Jan 2 23:18:43 sys4 vdr: [4352] frontend 0/0 provides DVB-S,DVB-S2,DSS with QPSK ("STV090x Multistandard")
Jan 2 23:18:43 sys4 vdr: [4352] probing /dev/dvb/adapter1/frontend0
Jan 2 23:18:43 sys4 vdr: [4352] creating cDvbDevice
Jan 2 23:18:43 sys4 vdr: [4352] new device number 2
Jan 2 23:18:43 sys4 vdr: [4373] section handler thread started (pid=4352, tid=4373, prio=low)
Jan 2 23:18:43 sys4 vdr: [4372] tuner on frontend 0/0 thread started (pid=4352, tid=4372, prio=high)
Jan 2 23:18:43 sys4 vdr: [4372] cTimeMs: using monotonic clock (resolution is 1 ns)
Jan 2 23:18:43 sys4 vdr: [4352] frontend 1/0 provides DVB-S,DVB-S2,DSS with QPSK ("STV090x Multistandard")
Jan 2 23:18:43 sys4 vdr: [4375] tuner on frontend 1/0 thread started (pid=4352, tid=4375, prio=high)
Jan 2 23:18:43 sys4 vdr: [4352] found 2 DVB devices
Jan 2 23:18:43 sys4 vdr: [4352] ERROR: invalid primary device number: 3
Jan 2 23:18:43 sys4 vdr: [4352] ERROR: no primary device found - using first device!
Jan 2 23:18:43 sys4 vdr: [4352] setting primary device to 1
Jan 2 23:18:43 sys4 vdr: [4352] assuming manual start of VDR
Jan 2 23:18:43 sys4 vdr: [4352] SVDRP listening on port 6419
Jan 2 23:18:43 sys4 vdr: [4352] setting current skin to "sttng"
Jan 2 23:18:43 sys4 vdr: [4352] loading /etc/vdr/themes/sttng-default.theme
Jan 2 23:18:43 sys4 vdr: [4352] remote control LIRC - keys known
Jan 2 23:18:43 sys4 vdr: [4352] switching to channel 1
Jan 2 23:18:43 sys4 vdr: [4352] setting watchdog timer to 60 seconds
Jan 2 23:18:43 sys4 lircd-0.9.0[2075]: accepted new client on /var/run/lirc/lircd
Jan 2 23:18:43 sys4 vdr: [4377] LIRC remote control thread started (pid=4352, tid=4377, prio=high)
Jan 2 23:18:43 sys4 vdr: [4352] OSD size changed to 720x480 @ 1
Jan 2 23:18:43 sys4 vdr: [4352] ERROR: no OSD provider available - using dummy OSD!
Jan 2 23:18:43 sys4 vdr: [4376] section handler thread started (pid=4352, tid=4376, prio=low)
Jan 2 23:18:43 sys4 vdr: [4368] epg data reader thread ended (pid=4352, tid=4368)
Jan 2 23:18:44 sys4 vdr: [4352] connect from 127.0.0.1, port 40560 - accepted
Jan 2 23:18:44 sys4 vdr: [4352] closing SVDRP connection
Jan 2 23:18:44 sys4 /etc/init.d/vdr[4385]: VDR errors from /var/log/messages:
Jan 2 23:18:44 sys4 /etc/init.d/vdr[4386]: ERROR: invalid primary device number: 3
Jan 2 23:18:44 sys4 /etc/init.d/vdr[4387]: ERROR: no primary device found - using first device!
Jan 2 23:18:44 sys4 /etc/init.d/vdr[4388]: ERROR: no OSD provider available - using dummy OSD!
Jan 2 23:18:44 sys4 vdrwatchdog[4396]: Starting vdrwatchdog
Jan 2 23:18:44 sys4 vdr: [4352] connect from 127.0.0.1, port 40561 - accepted
Jan 2 23:18:44 sys4 vdr: [4352] SVDRP message: 'Errors: Go to Commands/View VDR Start Log'
Jan 2 23:18:44 sys4 vdr: [4352] closing SVDRP connection
Jan 2 23:18:47 sys4 vdr: [4352] max. latency time 1 seconds
Jan 2 23:18:48 sys4 vdr: [4352] info: Errors: Go to Commands/View VDR Start Log
Jan 2 23:18:48 sys4 vdr: [4352] ERROR: no OSD provider available - using dummy OSD!

Alles anzeigen

wie geht das? einfach neu emergen?
bei layman -a vdr-xineliboutput kennt er nichts

ja hat einfach neu emergen hat geholfen

w_scan -fs -s S19E2 -o 7 >> channels.conf

Zitat

~ # w_scan -fs -s S19E2 -o 7 >> channels.conf
w_scan version 20120525 (compiled for DVB API 5.6)
using settings for 19.2 east Astra 1F/1G/1H/1KR/1L
scan type SATELLITE, channellist 67
output format vdr-1.7
WARNING: could not guess your codepage. Falling back to 'UTF-8'
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
main:3214: FATAL: ***** NO USEABLE SATELLITE CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.

Alles anzeigen

beim emergen von reelchannelscan

Zitat

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild R ] media-plugins/vdr-reelchannelscan-0.4.3-r3 0 kB

Total: 1 package (1 reinstall), Size of downloads: 0 kB

Would you like to merge these packages? [Yes/No]

>>> Verifying ebuild manifests

>>> Emerging (1 of 1) media-plugins/vdr-reelchannelscan-0.4.3-r3
* vdr-reelchannelscan-0.4.3.tgz RMD160 SHA1 SHA256 size ... [ ok ]
* Compiling against
* vdr-1.7.33 [API version 1.7.33]
* your vdr needs to be patched to use vdr-channelscan
* ERROR: media-plugins/vdr-reelchannelscan-0.4.3-r3 failed (setup phase):
* unpatched vdr detected
*
* Call stack:
* ebuild.sh, line 93: Called pkg_setup
* vdr-reelchannelscan-0.4.3-r3.ebuild, line 24: Called die
* The specific snippet of code:
* die "unpatched vdr detected"
*
* If you need support, post the output of `emerge --info '=media-plugins/vdr-reelchannelscan-0.4.3-r3'`,
* the complete build log and the output of `emerge -pqv '=media-plugins/vdr-reelchannelscan-0.4.3-r3'`.
* The complete build log is located at '/var/tmp/portage/media-plugins/vdr-reelchannelscan-0.4.3-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/media-plugins/vdr-reelchannelscan-0.4.3-r3/temp/die.env'.
* Working directory: '/var/tmp/portage/media-plugins/vdr-reelchannelscan-0.4.3-r3'
* S: '/var/tmp/portage/media-plugins/vdr-reelchannelscan-0.4.3-r3/work/reelchannelscan-0.4.3'

>>> Failed to emerge media-plugins/vdr-reelchannelscan-0.4.3-r3, Log file:

>>> '/var/tmp/portage/media-plugins/vdr-reelchannelscan-0.4.3-r3/temp/build.log'

* Messages for package media-plugins/vdr-reelchannelscan-0.4.3-r3:

* your vdr needs to be patched to use vdr-channelscan
* ERROR: media-plugins/vdr-reelchannelscan-0.4.3-r3 failed (setup phase):
* unpatched vdr detected
*
* Call stack:
* ebuild.sh, line 93: Called pkg_setup
* vdr-reelchannelscan-0.4.3-r3.ebuild, line 24: Called die
* The specific snippet of code:
* die "unpatched vdr detected"
*
* If you need support, post the output of `emerge --info '=media-plugins/vdr-reelchannelscan-0.4.3-r3'`,
* the complete build log and the output of `emerge -pqv '=media-plugins/vdr-reelchannelscan-0.4.3-r3'`.
* The complete build log is located at '/var/tmp/portage/media-plugins/vdr-reelchannelscan-0.4.3-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/media-plugins/vdr-reelchannelscan-0.4.3-r3/temp/die.env'.
* Working directory: '/var/tmp/portage/media-plugins/vdr-reelchannelscan-0.4.3-r3'
* S: '/var/tmp/portage/media-plugins/vdr-reelchannelscan-0.4.3-r3/work/reelchannelscan-0.4.3'

Alles anzeigen

jup nun gehts.

bei wirbelscan habe ich im forum gefunden brauch man n patch

was muss man mit ner diff machen?

vdr-wirbelscan-0.0.7-receiver-api-fixes.patch.diff

wie kann ich den benutzen?