Hallo Leute
ich habe hier ein ubuntu und möchte darauf den aktuellen VDR mit aktuellem Treiber - das ganze mit einer REV 1.5 FF Karte - also alles in allem normalerweise trivial
Was hab ich bisher gemacht:
Treiber:
Bash
#!/bin/sh
DIR="DVB-`date +%F`"
test -d $DIR && echo "$DIR already exists!" && exit 1
mkdir $DIR
cd $DIR
hg clone http://linuxtv.org/hg/~endriss/media_build_experimental
cd media_build_experimental
make download
make untarFirmware in /lib/firmware kopiert
Treiber lädt auch normal:
Code
Oct 30 13:37:12 tvserver2 kernel: [ 1295.164598] saa7146: register extension 'av7110'
Oct 30 13:37:12 tvserver2 kernel: [ 1295.164662] av7110 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Oct 30 13:37:12 tvserver2 kernel: [ 1295.164724] IRQ 20/: IRQF_DISABLED is not guaranteed on shared IRQs
Oct 30 13:37:12 tvserver2 kernel: [ 1295.164759] saa7146: found saa7146 @ mem fa094000 (revision 1, irq 20) (0x13c2,0x0000)
Oct 30 13:37:12 tvserver2 kernel: [ 1295.164778] av7110 0000:05:00.0: firmware: requesting dvb-ttpci-01.fw
Oct 30 13:37:12 tvserver2 kernel: [ 1295.169884] DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C)
Oct 30 13:37:12 tvserver2 kernel: [ 1295.170920] adapter has MAC addr = 00:d0:5c:02:86:de
Oct 30 13:37:12 tvserver2 kernel: [ 1295.178575] av7110 0000:05:00.0: firmware: requesting av7110/bootcode.bin
Oct 30 13:37:12 tvserver2 kernel: [ 1295.516128] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80fe2624
Oct 30 13:37:12 tvserver2 kernel: [ 1295.516135] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 30 13:37:12 tvserver2 kernel: [ 1295.564183] dvb-ttpci: Crystal audio DAC @ card 0 detected
Oct 30 13:37:12 tvserver2 kernel: [ 1295.565121] saa7146_vv: saa7146 (0): registered device video0 [v4l2]
Oct 30 13:37:12 tvserver2 kernel: [ 1295.565195] saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
Oct 30 13:37:13 tvserver2 kernel: [ 1295.828811] DVB: registering adapter 0 frontend 0 (Philips TDA8083 DVB-S)...
Oct 30 13:37:13 tvserver2 kernel: [ 1295.829102] input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:1e.0/0000:05:00.0/input/input8
Oct 30 13:37:13 tvserver2 kernel: [ 1295.829217] dvb-ttpci: found av7110-0.Wenn ich jetzt mal den VDR starte kommt:
Code
Oct 30 13:38:14 tvserver2 vdr: [1833] found 1 DVB device
Oct 30 13:38:14 tvserver2 vdr: [1833] setting primary device to 1
Oct 30 13:38:14 tvserver2 vdr: [1833] device 1 has no MPEG decoder
Oct 30 13:38:14 tvserver2 vdr: [1833] assuming manual start of VDR
Oct 30 13:38:14 tvserver2 vdr: [1833] SVDRP listening on port 6419
Oct 30 13:38:14 tvserver2 vdr: [1833] setting current skin to "sttng"
Oct 30 13:38:14 tvserver2 vdr: [1833] loading /vdr/settings//themes/sttng-default.theme
Oct 30 13:38:14 tvserver2 vdr: [1833] remote control KBD - learning keys
Oct 30 13:38:14 tvserver2 vdr: [1841] KBD remote control thread started (pid=1833, tid=1841)
Oct 30 13:38:14 tvserver2 vdr: [1833] ERROR: no OSD provider available - using dummy OSD!Und dann:
Code
root@tvserver2:/vdr/VDR# ./vdr -v /video0/ -c /vdr/settings/
SpeicherzugriffsfehlerDie Kernel Header sind installiert - die Kernel-Config hab ich mit der im WIKI verglicken - sollte passen (gepasst haben) - ich weiss momentan nicht, was ich falsch gemacht hab ?
Bin für jeden tip dankbar !
CU
GTR