[yavdr 0.4] keine Fernbedienung der SkyStar HD2 (mantis) [erledigt]

Super
Dann schreibe ich das noch mal in deinen Feature-Request, dass die Regel in /etc/rc_maps.cfg so lauten muss (der Pfad für die Keymaps wurde nach der 0.4pre1 geändert, dort liegen jetzt alle Profile für ir-keytable - ich muss das noch in der Doku anpassen):

mantis_core   *   /lib/udev/rc_keymaps/skystarhd2

Und dass v4l-dvb-dkms für die Karte aktiv sein sollte - hast du noch die lspci-Ausgabe für die Karte, damit dieses Paket bei der Installation der nächsten yaVDR-Version dann gleich mitinstalliert werden kann?

Hallo,

ich bin HDVDR Anfänger und brauche Hilfe. Ich habe zwei FF ctvdr 7 Systeme. Mein HD-Test System ist ein P4 mit GT220 und Skystar HD2. Ich habe yavdr 0.4 frisch installiert.
Dann nur apt-get update und dist-upgrade. Der VDR kommt hoch und ich sehe den Stream von 3sat.

administrator@hdvdr:~$ dkms status
ati-remote, 0.0.1, 2.6.38-8-generic, i686: built
ati-remote, 0.0.1, 2.6.38-13-generic, x86_64: installed
nvidia-current, 270.41.06, 2.6.38-11-generic, x86_64: installed
nvidia-current, 270.41.06, 2.6.38-13-generic, x86_64: installed

Nun habe ich das so verstanden, dass man v4l-dvb-dkms installieren soll.
administrator@hdvdr:~$ sudo aptitude install v4l-dvb-dkms
No candidate version found for v4l-dvb-dkms
No candidate version found for v4l-dvb-dkms
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.

Alternativ:
administrator@hdvdr:~$ sudo aptitude install s2-liplianin-dkms
No candidate version found for s2-liplianin-dkms
No candidate version found for s2-liplianin-dkms
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.

Was mich auch wundert: System => Einstellungen DVB: Primäres DVB-Interface.9 Wenn ich die Anleitung recht verstehe, müsste da eine 1 stehen, wenn ich nur eine Karte drin habe. Ändere ich diesen Wert auf 1, dass ist der VDR weg.

Ein dmesg ||more liefert
[ 17.298769] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.298786] nvidia 0000:01:00.0: setting latency timer to 64
[ 17.298795] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+me
m,decodes=none:owns=io+mem
[ 17.299115] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.06 Mon Ap
r 18 14:53:56 PDT 2011
[ 17.317978] IR NEC protocol handler initialized
[ 17.323636] IR RC5(x) protocol handler initialized
[ 17.350155] IR RC6 protocol handler initialized
[ 17.354825] IR JVC protocol handler initialized
[ 17.359442] IR Sony protocol handler initialized
[ 17.422580] lirc_dev: IR Remote Control driver registered, major 251
[ 17.434037] IR LIRC bridge handler initialized
[ 17.575448] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.595279] logips2pp: Detected unknown logitech mouse model 115
[ 17.668507] Mantis 0000:0b:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 17.669611] DVB: registering new adapter (Mantis DVB adapter)
[ 18.131748] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i804
2/serio1/input/input3
[ 18.430103] ppdev: user-space parallel port driver
[ 19.463019] stb0899_attach: Attaching STB0899
[ 19.507441] stb6100_attach: Attaching STB6100
[ 19.532282] LNBx2x attached on addr=8
[ 19.532292] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
[ 20.126037] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 1
6
[ 20.126048] hda_intel: Disable MSI for Nvidia chipset
[ 20.126117] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 20.166318] tg3 0000:07:00.0: eth0: Link is up at 1000 Mbps, full duplex
[ 20.166326] tg3 0000:07:00.0: eth0: Flow control is on for TX and on for RX
[ 20.166627] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.326354] svc: failed to register lockdv1 RPC service (errno 97).
[ 20.326449] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery d
irectory
[ 20.345546] NFSD: starting 90-second grace period
[ 24.000023] HDMI: detected monitor 32W_LCD_TV
[ 24.000026] at connection type HDMI
[ 24.000031] HDMI: available speakers: FL/FR
[ 24.000036] HDMI: supports coding type LPCM: channels = 2, rates = 44100 4800
0 88200, bits = 16
[ 31.110012] eth0: no IPv6 routers present
[ 155.915123] hda-intel: IRQ timing workaround is activated for card #0. Sugges
t a bigger bdl_pos_adj.
administrator@hdvdr:~$

Nun habe ich dselect installiert und nach dkms gesucht. Er zeugt bei mir bei den möglichen Paketen nur dkms, ati-remote-dkms, hid-gyration-dkms und weder v4l noch liplian. Was läuft da bei mir schief? Hier wäre noch meine /etc/apt/sources.list
administrator@hdvdr:~$ sudo more /etc/apt/sources.list
#

# deb cdrom:[Ubuntu 11.04 _Natty Narwhal_ - Release amd64 (20110426)]/ natty ext
ras main restricted

#deb cdrom:[Ubuntu 11.04 _Natty Narwhal_ - Release amd64 (20110426)]/ natty extr
as main restricted

# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://de.archive.ubuntu.com/ubuntu/ natty main restricted
deb-src http://de.archive.ubuntu.com/ubuntu/ natty main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://de.archive.ubuntu.com/ubuntu/ natty-updates main restricted
deb-src http://de.archive.ubuntu.com/ubuntu/ natty-updates main restricted

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://de.archive.ubuntu.com/ubuntu/ natty universe
deb-src http://de.archive.ubuntu.com/ubuntu/ natty universe
deb http://de.archive.ubuntu.com/ubuntu/ natty-updates universe
deb-src http://de.archive.ubuntu.com/ubuntu/ natty-updates universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://de.archive.ubuntu.com/ubuntu/ natty multiverse
deb-src http://de.archive.ubuntu.com/ubuntu/ natty multiverse
deb http://de.archive.ubuntu.com/ubuntu/ natty-updates multiverse
deb-src http://de.archive.ubuntu.com/ubuntu/ natty-updates multiverse

## Uncomment the following two lines to add software from the 'backports'
## repository.
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
# deb http://de.archive.ubuntu.com/ubuntu/ natty-backports main restricted unive
rse multiverse
# deb-src http://de.archive.ubuntu.com/ubuntu/ natty-backports main restricted u
niverse multiverse

deb http://security.ubuntu.com/ubuntu natty-security main restricted
deb-src http://security.ubuntu.com/ubuntu natty-security main restricted
deb http://security.ubuntu.com/ubuntu natty-security universe
deb-src http://security.ubuntu.com/ubuntu natty-security universe
deb http://security.ubuntu.com/ubuntu natty-security multiverse
deb-src http://security.ubuntu.com/ubuntu natty-security multiverse

## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
# deb http://archive.canonical.com/ubuntu natty partner
# deb-src http://archive.canonical.com/ubuntu natty partner

## Uncomment the following two lines to add software from Ubuntu's
## 'extras' repository.
## This software is not part of Ubuntu, but is offered by third-party
## developers who want to ship their latest software.
# deb http://extras.ubuntu.com/ubuntu natty main
# deb-src http://extras.ubuntu.com/ubuntu natty main

VG,

Markus

Ok, wieder einen Schritt weiter.

Die o.g. Pakete gibt es nicht mehr. Man muss zwischen
linux-media-tbs-dkms und linux-media-dkms wählen. Ich habe jetzt mal das 2. genommen. Man wird weiter sehen.

VG

Markus