Nach System Start 5-10s No Signal, dann kommt Bild

Hallo

habe nach Neustart des Rechners immer so ca. 5-10s kein Bild und es kommt das No Signal Logo.

Kann man das was ändern?

MfG

avalanche99

Hallo,

Also wenn ich z.B. am Abend den HTPC ausschalte und ihn
am nächsten Tag wieder einschalte bekomme ich gleich nach dem Einschalten für ca. 5-10s die Meldung "No Signal".
Danach kommt dann das Nild.

Meine Frage ist das normal oder eine Einstellungssache?
Muss ich irgendwie einstellen aus welche Karte das System als erstes zugreiffen soll?
Das passiert aber auch wenn ich nuer 1 DVB-S2 Karte eingesteckt hab.

MfG

Avalanche99

Ausschalten per Fernbedienung und dann auch ganz vom Strom getrennt, Multischalter mit ei/aus Taste.

Log kann ich erst heute Mittag posten, bin auf der Arbeit.
Welchen Log von deen 3? Sys, user, ...?

Sorry, vergesse das mit dem Log immer, werd mich bessern in Zukunkt.

MfG

avalanche99

Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.105614] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.109614] HDA Intel 0000:01:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.109617] hda_intel: Disable MSI for Nvidia chipset
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.128508] lp0: using parport0 (interrupt-driven).
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.207741] cx23885 driver version 0.0.2 loaded
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.207772] cx23885 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.207813] CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.334821] cx23885_dvb_register() allocating 1 frontend(s)
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.334825] cx23885[0]: cx23885 based dvb card
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.341220] DS3000 chip version: 0.192 attached.
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.341223] DVB: registering new adapter (cx23885[0])
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.341226] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.368618] TeVii S470 MAC= 00:18:BD:5B:28:3F
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.368622] cx23885_dev_checkrevision() Hardware revision = 0xb0
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.368629] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfe800000
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.368640] IRQ 16/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.900329] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.900353] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Oct 4 15:28:28 ubuntu-htpc kernel: [ 11.900494] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.15 Thu Mar 11 21:41:46 PST 2010
Oct 4 15:28:28 ubuntu-htpc kernel: [ 13.185267] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Oct 4 15:28:28 ubuntu-htpc kernel: [ 13.678337] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=0
Oct 4 15:28:28 ubuntu-htpc kernel: [ 13.717193] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=1
Oct 4 15:28:28 ubuntu-htpc kernel: [ 13.814449] svc: failed to register lockdv1 RPC service (errno 97).
Oct 4 15:28:28 ubuntu-htpc kernel: [ 13.816735] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Oct 4 15:28:28 ubuntu-htpc kernel: [ 13.867259] NFSD: starting 90-second grace period
Oct 4 15:28:29 ubuntu-htpc vdr: [996] [xine..put] Listening on address '127.0.0.1' port 37890
Oct 4 15:28:29 ubuntu-htpc signal-event[1009]: finished processing signal on-boot
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492042] HDMI: detected monitor SAMSUNG LCD
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492045] at connection type HDMI
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492048] HDMI: available speakers: FL/FR
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492051] ------------[ cut here ]------------
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492059] WARNING: at /build/buildd/linux-2.6.32/lib/vsprintf.c:1100 vsnprintf+0x3f2/0x410()
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492061] Hardware name: MS-7596
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492062] Modules linked in: nfsd exportfs nfs lockd nfs_acl auth_rpcgss snd_hda_codec_nvhdmi ds3000 cx23885 cx2341x snd_hda_codec_realtek ppdev v4l2_common videodev v4l1_compat videobuf_dma_sg videobuf_dvb dvb_core lp sunrpc parport_pc lirc_imon lirc_dev psmouse serio_raw snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore snd_page_alloc parport videobuf_core i2c_piix4 ir_common btcx_risc tveeprom ir_core nvidia(P) agpgart usbhid hid ohci1394 ahci ieee1394 r8169 mii pata_atiixp
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492089] Pid: 825, comm: hd-audio1 Tainted: P 2.6.32-22-generic #33-Ubuntu
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492091] Call Trace:
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492096] [<c014c3d2>] warn_slowpath_common+0x72/0xa0
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492099] [<c0352212>] ? vsnprintf+0x3f2/0x410
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492101] [<c0352212>] ? vsnprintf+0x3f2/0x410
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492104] [<c014c41a>] warn_slowpath_null+0x1a/0x20
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492107] [<c0352212>] vsnprintf+0x3f2/0x410
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492110] [<c03522ba>] snprintf+0x1a/0x20
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492118] [<f9a5f64d>] snd_print_pcm_bits+0x5d/0x80 [snd_hda_codec]
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492125] [<f9a687f7>] hdmi_show_short_audio_desc+0xf7/0x100 [snd_hda_codec]
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492127] [<c03522ba>] ? snprintf+0x1a/0x20
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492133] [<f9a6885f>] snd_hdmi_show_eld+0x5f/0xa0 [snd_hda_codec]
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492138] [<f9a68b6c>] ? snd_hdmi_get_eld+0x29c/0x2d0 [snd_hda_codec]
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492143] [<f9a68b6c>] ? snd_hdmi_get_eld+0x29c/0x2d0 [snd_hda_codec]
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492146] [<fab8e706>] hdmi_unsol_event+0x106/0x110 [snd_hda_codec_nvhdmi]
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492150] [<c013eff3>] ? finish_task_switch+0x43/0xc0
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492155] [<f9a5f106>] process_unsol_events+0x56/0x70 [snd_hda_codec]
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492158] [<c016369e>] run_workqueue+0x8e/0x150
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492163] [<f9a5f0b0>] ? process_unsol_events+0x0/0x70 [snd_hda_codec]
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492166] [<c01637e4>] worker_thread+0x84/0xe0
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492169] [<c0167740>] ? autoremove_wake_function+0x0/0x50
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492171] [<c0163760>] ? worker_thread+0x0/0xe0
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492173] [<c01674b4>] kthread+0x74/0x80
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492175] [<c0167440>] ? kthread+0x0/0x80
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492177] [<c0104087>] kernel_thread_helper+0x7/0x10
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492179] ---[ end trace 9706959c5194800e ]---
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492181] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492183] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=0
Oct 4 15:28:29 ubuntu-htpc kernel: [ 14.492185] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=1
Oct 4 15:28:30 ubuntu-htpc kernel: [ 15.272077] HDMI: detected monitor SAMSUNG LCD
Oct 4 15:28:30 ubuntu-htpc kernel: [ 15.272082] at connection type HDMI
Oct 4 15:28:30 ubuntu-htpc kernel: [ 15.272089] HDMI: available speakers: FL/FR
Oct 4 15:28:30 ubuntu-htpc kernel: [ 15.272100] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16
Oct 4 15:28:30 ubuntu-htpc vdr: [996] [general.info] Using software decryption on card 0
Oct 4 15:28:30 ubuntu-htpc vdr: [1390] [xine..put] Listening on port 37890
Oct 4 15:28:30 ubuntu-htpc vdr: [1390] [xine..put] Listening for UDP broadcasts on port 37890
Oct 4 15:28:30 ubuntu-htpc vdr: [1390] [xine..put] Client 0 connected: 127.0.0.1:33456
Oct 4 15:28:30 ubuntu-htpc vdr: [1390] [xine..put] Client connection 0 closed
Oct 4 15:28:30 ubuntu-htpc vdr: [1390] [xine..put] Closing connection 0
Oct 4 15:28:30 ubuntu-htpc kernel: [ 15.585916] display port opened
Oct 4 15:28:30 ubuntu-htpc kernel: [ 15.723275] lirc_imon: IR port opened
Oct 4 15:28:31 ubuntu-htpc vdr-sxfe[1392]: [1392] [vdr-fe] Detected 2 CPUs
Oct 4 15:28:31 ubuntu-htpc vdr-sxfe[1392]: [1392] [vdr-fe] Enabling FFmpeg multithreaded video decoding
Oct 4 15:28:31 ubuntu-htpc vdr-sxfe[1392]: [1392] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Oct 4 15:28:31 ubuntu-htpc vdr: [1390] [xine..put] Client 0 connected: 127.0.0.1:33457
Oct 4 15:28:31 ubuntu-htpc vdr-sxfe[1392]: [1392] [input_vdr] Server greeting: VDR-1.7.15 xineliboutput-1.0.90-cvs READY
Oct 4 15:28:31 ubuntu-htpc vdr-sxfe[1392]: [1392] [input_vdr] Connected (control) to tcp://127.0.0.1:37890
Oct 4 15:28:31 ubuntu-htpc vdr-sxfe[1392]: [1392] [input_vdr] Connecting (data) to tcp://127.0.0.1:37890 ...
Oct 4 15:28:31 ubuntu-htpc vdr: [1390] [xine..put] Client 1 connected: 127.0.0.1:33458
Oct 4 15:28:31 ubuntu-htpc vdr-sxfe[1392]: [1392] [input_vdr] Data stream connected (TCP)
Oct 4 15:28:31 ubuntu-htpc vdr-sxfe[1392]: [1392] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
Oct 4 15:28:31 ubuntu-htpc vdr-sxfe[1392]: [1392] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video
Oct 4 15:28:31 ubuntu-htpc vdr-sxfe[1392]: [1392] [demux_vdr] Using decoder "FFmpeg" for H.264 video
Oct 4 15:28:31 ubuntu-htpc vdr-sxfe[1392]: [1419] [vdr-fe] Keyboard thread terminated
Oct 4 15:28:33 ubuntu-htpc vdr-sxfe[1392]: [1418] [demux_vdr] PMT changed
Oct 4 15:28:33 ubuntu-htpc kernel: [ 18.454620] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
Oct 4 15:28:33 ubuntu-htpc kernel: [ 18.454633] cx23885 0000:02:00.0: firmware: requesting dvb-fe-ds3000.fw
Oct 4 15:28:33 ubuntu-htpc kernel: [ 18.512422] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
Oct 4 15:28:41 ubuntu-htpc vdr-sxfe[1392]: [1418] [input_vdr] No data in 8 seconds, queuing no signal image
Oct 4 15:28:41 ubuntu-htpc vdr-sxfe[1392]: [1418] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
Oct 4 15:28:42 ubuntu-htpc vdr: [1424] [xine..put] Detected video size 720x576

Danke für die schnelle Antwort und Erkläung.

Wenn das Bild dann nicht eher kommt, dann ist es mir auch egaal. Hab geglaubt das Bild musste da sein wenn VDR ganz an ist.

ob jetzt bootvorgang länger dauert und dann bild, oder bootvorgang kürzer dafür dann das no signal logo kommt ändert ja nichts.

MfG

avalanche99

@ Gerald, sorry, ist entfernt. Aber es funzt auch nicht besser ohne das "illegale" Plugin.

@ Hermonu
Danke für deine Hilfe, werde das dann doch mal probieren, da ich immer Ruckler nach erscheinen des Bildes habe und wenn ich dann auf der Tastatur die ESC Taste einmal drücke kommt das Bild normal.

Dann werd ich mich mal über Google ein wenig schlauer machen wie das geht und wenn jemand Zeit hat kann ech mir als Linux Newbie dabei helfen, sonst probier ich's halt irgendwie hin zu bekommen.

MfG

avalanche99