Hallihallo!
Ich habe wor einigen Tagen meine TT-1600er gegen eine SaTiX-S2 V3 CI Dual getauscht und sie mit einem "apt-get install linux-media-dkms" an den Start gebracht.
Nun habe ich den Thread Cine S2 firmware gelesen und ich wundere mich, warum ich das Problem nicht habe. 
Die SaTiX-S2 V3 CI Dual ist doch die selbe wie die Cine S2 V6, oder?
Beim mir wird gar keine Firmware geladen:
Code
root@yavdr3:~# dmesg | grep -i ngene
root@yavdr3:~#Code
[ 17.693178] Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH
[ 17.693252] DDBridge 0000:04:00.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
[ 17.693265] DDBridge driver detected: Mystique SaTiX-S2 V3 DVB adapter
[ 17.693287] HW 00010007 REG 00010003
[ 17.693330] DDBridge 0000:04:00.0: irq 42 for MSI/MSI-X
[ 17.693704] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
[ 17.693708] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
[ 17.693844] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 17.693847] snd_hda_intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 17.693850] hda_intel: Disabling MSI
[ 17.693865] snd_hda_intel 0000:00:07.0: setting latency timer to 64
[ 17.694743] Port 0 (TAB 1): DUAL DVB-S2
[ 17.695518] Port 1 (TAB 2): NO MODULE
[ 17.696284] Port 2 (TAB 3): NO MODULE
[ 17.696793] DVB: registering new adapter (DDBridge)
[ 17.696795] DVB: registering new adapter (DDBridge)
[ 17.857919] LNBx2x attached on addr=a
[ 17.859223] stv6110x_attach: Attaching STV6110x
[ 17.859226] attach tuner input 0 adr 60
[ 17.859230] DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[ 17.908372] LNBx2x attached on addr=8
[ 17.908381] stv6110x_attach: Attaching STV6110x
[ 17.908383] attach tuner input 1 adr 63
[ 17.908386] DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[ 18.226902] WARNING: You are using an experimental version of the media stack.Code
root@yavdr3:~# dmesg | grep -i DVB
[ 17.693265] DDBridge driver detected: Mystique SaTiX-S2 V3 DVB adapter
[ 17.694743] Port 0 (TAB 1): DUAL DVB-S2
[ 17.696793] DVB: registering new adapter (DDBridge)
[ 17.696795] DVB: registering new adapter (DDBridge)
[ 17.859230] DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[ 17.908386] DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
root@yavdr3:~#Wer bringt Licht in mein Dunkel? 
Danke und Grüße,
wayne
Wieder was dazugelernt...