You are not logged in.

Dear visitor, welcome to VDR Portal. If this is your first visit here, please read the Help. It explains in detail how this page works. To use all features of this page, you should consider registering. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

1

Monday, July 11th 2011, 6:54pm

TT S2-3650 CI USB with DiSeqC 2.0 under linux?

Hi all,

I'm trying for 2 weeks to get my TT3650 running in a diseqc 2.0 4/1 setup.
Running Ubuntu 11.04 (2.6.38-8 kernel) and using the svn from liplianin for the drivers/modules.
I just can't get it working. The driver works with 1 satellite straight to LNB. The setup also works fine under windows but with linux I can't get the diseqc 2.0 working.
All scanning apps are failing tuning whatever I try. (ie. w_scan -o7 -fs -s S19E2 -D0c)
I'm very sure that the setup is fine. switchport 0=19.2, port 1=13.0, port 2=23,5 and port 3=28.2

Are these drivers supporting diseqc 2.0 anyway or do I need to patch?

Please help!

Thanks.

2

Tuesday, July 12th 2011, 8:33pm

May this helps: http://channelpedia.yavdr.com/gen/html/

There are no special 2.0 dependences, diseqc 1.0 settings are fine.

cu

Mein VDR

Mein VDR
Digitainer2xBouget DVB-SDebian Squeeze (Kernel 2.6.35.3 von kernel.org)Softdevice Ausgabepluginvdr 1.6.0-3 (Extensions Patch 72) und viele Plugins von SourceMedion X10 FernbedienungSDC-Megtron Display (240x128x1) mit GraphLCD-PluginFreevo 1.9.0
Vodcatcher Helper in ein freundliches DEB verpackt, Tester Willkommen: http://dl.dropbox.com/s/705bh6ydgisfrqu/index.htmlFingerprint: 8A104A00D5031773A9F72A19BAEE135EA7860149

hepi

Sage

Posts: 5,364

Location: Heidelberg

  • Send private message

3

Tuesday, July 12th 2011, 8:49pm

I have a TT Connect S2 3600 and always had problems with any Diseqc commands (not necessarily 2.0) on Linux (never tested Windows). After I switched to a powered multiswitch all problems were gone.
But you should be able to tune to the channels of Diseqc position 1 even if Diseqc doesn't work with the TT 36*0 and your Diseqc switch is not powered.

Cheers,
hepi
Must-read: yaVDR-FAQ | Aktuelle Kanallisten findet Ihr in der Channelpedia | Meine momentan aktive Hardware: VDR1: yaVDR 0.5alpha1 auf Zotac ZBOX ID40 + 2x Technisat Skystar USB HD + Gyration GYR3101 FB & KB + LCD-Display Linux4Media 4243:ee08 | VDR2: yaVDR 0.5.alpha1 auf Acer Aspire Revo 3600 + 2x TechnoTrend S2-3600 DVB-S2 USB | VDR 3: Seagate Goflex Net mit Debian Squeeze + Kernel 3.1.10 + VDR 1.7.22 + HDHomeRun 2x DVB-C

4

Tuesday, July 12th 2011, 9:02pm

Hmmm...strange. I have no signal on switch 0 (or any other) either.The diseqc is an unpowered one, so power/tone from the receiver (tt3650)
De diseqc is new and working (tested with dreambox and windows)

Can the length be an issue? Probably not because like I said its working in windows.

5

Tuesday, July 12th 2011, 9:08pm

Can the length be an issue? Probably not because like I said its working in windows.


May the Win Drivers do something different? For example send the diseqc command twice or have more tolerance at the tuning frequency (may you lnb have an LOF drift?)? Or the Win Driver support switching the power to an higher level (eg. 18,5Volt and not 18Volt)?
diseqc 1.0 (that is what you need) are basic, every dvb Hardware should support this.

The problem with unpowered switches are that the dvb card need power the switch and the lnb.

cu

Mein VDR

Mein VDR
Digitainer2xBouget DVB-SDebian Squeeze (Kernel 2.6.35.3 von kernel.org)Softdevice Ausgabepluginvdr 1.6.0-3 (Extensions Patch 72) und viele Plugins von SourceMedion X10 FernbedienungSDC-Megtron Display (240x128x1) mit GraphLCD-PluginFreevo 1.9.0
Vodcatcher Helper in ein freundliches DEB verpackt, Tester Willkommen: http://dl.dropbox.com/s/705bh6ydgisfrqu/index.htmlFingerprint: 8A104A00D5031773A9F72A19BAEE135EA7860149

This post has been edited 2 times, last edit by "Keine_Ahnung" (Jul 12th 2011, 9:14pm)


Similar threads

Used tags

3650, diseqc, Linux