Kann ich mit dem MPlayer auch Videostreams aus dem Netz anschauen? z.B.: von GIGA.de! oder mit einem anderen Plugin?
Videostreams aus dem Netz!
- Solarstorm
- Closed
-
-
Jau, kannst du. Ich habe das so gemacht, dass ich in ein Ascii-file die Adresse vom Stream reingeschrieben habe, also im Falle von giga.de zB.
Die mplayer.sh hab ich so abgeändert, dass bei einem File des Typs ASCII eben eine URL in diesem File steckt.
Also ungefähr so sähe die original mplayer.sh aus dem example-Ordner des Plugins aus:Bash
Display More#!/bin/bash # # This script is called from VDR to start MPlayer # # argument 1: the file to play # argument 2: (optional) the phrase SLAVE if SlaveMode is enabled # argument 3: (optional) the phrase AID x to select audio stream x # where to find mplayer MPLAYER="mplayer" # mplayer options, -vc will be added below # add "-lircconf <lircrc>" to enable LIRC support OPTS="-vo mpegpes" # mplayer options for SlaveMode SLAVE="-slave -quiet -nolirc" ##################### FILE=$1 type=`file "$FILE"` while shift; do if [ "$1" = "SLAVE" ]; then sopt=$SLAVE elif [ "$1" = "AID" ]; then aopt="-aid $2" shift fi done case "$type" in *AVI*) VC="-vc ffdivx" ;; *MPEG*) VC="-vc mpegpes" ;; *ascii*) FILE=`cat $FILE` ;; *) echo "Unknown video file format $type" echo "Edit mplayer.sh to support this file type" exit 1 ;; esac exec $MPLAYER $OPTS $VC $sopt $aopt "$FILE"
, wobei Zeile 40-42 die geänderten sind.
-
*kaumtrauzufragen* aber wo finde ich di mplayer.sh?
-
..in Heidelberg. Ne, Scherz :
Normalerweise (wenn du das Plugin von den Sources installierst) erstmal im Pluginsverzeichnis unter examples/, dass kopiert man dann in ein Verzeichnis, in dem sonstige ausführbare Dateien liegen (also hier meist /usr/local/bin).
Manche benutzen auch die sehr gute (aber wesentlich komplexere) mplayer.sh aus dem Forum hier, muss man aber selbst nachträglich installieren...Also die Frage an dich: Hast du von den Sources installiert ? Oder nutzt du eine fertige Distribution (linVDR, ctvdr...)?
-
ich hab linvdr drauf ! und ich hab ein super grosses problem damit bei der dateei architektur von linux durchzublicken *windowsuserhalt*
-
Hatte ich nie drauff, weiss ich daher nicht. Guck mal im erwähnten /usr/local/bin Directory, ansonsten wird die Doku vom linvdr mehr wissen, oder frag' hier im entsprechenden LinVDR-Forum.
-
ähh, ich habs gefunden sieht aber komplett anders aus (war unter /usr/bin/mplayer.sh ) *verzweifel*
Bash
Display More#!/bin/bash unset LANG declare VERSION="0.8.4" # History (as always in the source code :-) # # 0.8.4 - added some more debugging info # - changed the MPlayer option that is used to play DVDs and VCDs from # -vcd/-dvd to VCD:// and DVD:// # - added cuefile support for MPlayer version 1.0x # - added new config option to distinguish MPlayer versions (0.9x or 1.0) # important for playing cuefiles # - fixed bug in detecting empty CACHE option # - fixed a bug where USE_SPEED is ignored and '-speed' always used # - added a check for the return value of 'mplayer -identify' # - added support for AC3 sound when playing a DVD # - make audio output configurable via config file (e.g. for DXR3) # # 0.8.3 - changed the default value of USERDEF from '-really-quiet' to '-quiet', # because it suppressed the progressbar messages from mplayer # - added '-dvd 1' to the DVD call to reliably play a DVD # (though only the first one) # # 0.8.2 - changed the way mplayer is called to identify files; # should prevent the opening of a X window, that happens # on some systems # - play mpeg files without any scaling if possible # - added config line for AC3 out via DVB card (thanks to Christian Jacobsen) # - added a new config option to choose the video out device; # intended for dx3 users # - added config options for subtitles (thanks to Martin Åkerström) # - fixed a bug when SLOW_CPU is set to "false" instead of being # just commented out # - minor code clean-up # - cleanup some comments and messages # # 0.8.1 - fixed a bug when DVDFiles or DVD not set correctly # - if path to mplayer is incorrect, log an error and exit # - cue file support; you can now choose a cue file as input; # after I did this on user request, I asked myself, for what # do one needs this, as mplayer can play .bin files directly... # - support for 16/9 TV sets (thanks to Vaclav Janecek) # # 0.8.0 - bumped the version number to be more flexible # - added VCD/DVD support # # 0.0.7 - clear LANG variable # - added support for slow computers: reduces the Y # resolution to the half of the possible maximum # - use kind of a window for detecting the frames_per_sec # # 0.0.6a-jha # - fixed a bug that prevented the SLAVE mode from working # # 0.0.6-jha # - major rework # - added config option to disable either NTSC or PAL support # - added mplayer's '-speed' option; is disabled by default (see # config file), because it didn't work as expected for me # - rudimentary sub titles support: # if a sub titles file (.sub suffix) with exactly the # same name as the played video file exists, it is used # (not really useful yet) # - changed the was the config file is parsed: # let's do it the simple way, just source the file # ================================================= # ---> IMPORTANT! you MUST use the new config file # ================================================= # # 0.0.5d-jha # - added AC3 support (thanks to Christian Jacobsen # <christian.jacobsen -at- stageholding.de>) # - better support for mplayers SLAVE mode # - fixed some scaling problems # - some minor clean-ups # # 0.0.5c-jha # - play videos with 24 or 23.976 fps as NTSC, not PAL # # 0.0.5b-jha # - Improved getvidxy - thanks to new mplayer option '-identify' # it gets now the correct values for X-/Y-resolution # and the framerate (if defined in the video file) # for all media files # - reworked the scaling calculation to scale only if needed # and if so, scale as little as possible to save CPU power # - distinguish between NTSC and PAL files; play them with # the right TV norm # # 0.0.4 Improved getvidxy - No Temp Files needed anymore! # # 0.0.3 Seems to work fine - still lacks support for X x 432 Files # What about MPEG Files ? # function initialize () { # source config file source "$CFGFIL" # Debug Mode ? if test -z "$DEBUG" -o "$DEBUG" != "true"; then DEBUG=false; fi # use AC3? if test -z "$USEAC3" -o "$USEAC3" != "true"; then USEAC3=false; fi debugvar USEAC3 "$USEAC3" # AC3 command line if test -z "$AC3AOUT"; then errorcfg AC3AOUT exit else debugvar AC3AOUT "$AC3AOUT" fi # TV aspect ratio if test -z "$TV_ASPECT"; then errorcfg TV_ASPECT; fi debugvar TV_ASPECT "$TV_ASPECT" # can do PAL? if test -z "$PAL" -o "$PAL" != "true"; then PAL=false; fi debugvar PAL "$PAL" # can do NTSC? if test -z "$NTSC" -o "$NTSC" != "true"; then NTSC=false; fi debugvar NTSC "$NTSC" if test $NTSC == "false" -a $PAL == "false"; then echolog "*** FATAL: Config Options NTSC and PAL both set to false ... Exiting." exit fi # use speed setting? SPEED="" if test -z "$USE_SPEED"; then USE_SPEED=false; fi debugvar USE_SPEED "$USE_SPEED" # where is Mplayer if ! test -x "$MPLAYER" -a -f "$MPLAYER"; then echolog "*** Option MPLAYER not found in config file or not set correctly" exit else debugvar MPLAYER "$MPLAYER" fi if test -z "$VOP"; then errorcfg VOP; exit; else debugvar VOP "$VOP"; fi if test -z "$VO"; then errorcfg VO; exit; else debugvar VO "$VO"; fi if test -z "$AO"; then errorcfg AO; exit; else debugvar AO "$AO"; fi AOUT="-ao $AO" if test -z $CACHE; then echolog "*** Option CACHE not set in config file - calling mplayer without Cache!" CACHESTR="-nocache" else CACHESTR="-cache $CACHE"; debugvar CACHE "$CACHE"; debugvar CACHESTR "$CACHESTR" fi if test -z "$FRAMEDROP" -o "$FRAMEDROP" != "true"; then FRAMEDROP=false; fi debugvar FRAMEDROP "$FRAMEDROP" if $FRAMEDROP; then FDSTR="-framedrop"; fi debugvar FDSTR "$FDSTR" declare LIRCSTR="" # no extra Lirc option! if ! test -z "$LIRCRC"; then LIRCSTR="-lircconf $LIRCRC"; fi debugvar LIRCRC "$LIRCRC"; debugvar LIRCSTR "$LIRCSTR" if ! test -z "$SUBPOS"; then SUBTITLES=" -subpos $SUBPOS"; fi if ! test -z "$SUBCOLOR"; then SUBTITLES="$SUBTITLES -sub-bg-color $SUBCOLOR"; fi if ! test -z "$SUBALPHA"; then SUBTITLES="$SUBTITLES -sub-bg-alpha $SUBCOLOR"; fi debugvar SUBTITLE "$SUBTITLES" if test "$SLAVE" != "SLAVE"; then REMOTE="$LIRCSTR" else REMOTE="-slave -nolirc" fi debugvar REMOTE "$REMOTE" if ! test -z "$USERDEF"; then echolog "*** Use Option USERDEF at your own risk!"; fi debugvar USERDEF "$USERDEF" if test -z $XResPAL; then errorcfg XResPAL; exit; else debugvar XResPAL "${XResPAL[*]}"; fi if test -z $XResNTSC; then errorcfg XResNTSC; exit; else debugvar XResNTSC "${XResNTSC[*]}"; fi # do we run on a slow computer? if test -z "$SLOW_CPU" -o "$SLOW_CPU" == "false"; then SLOW_CPU=false else XResPAL=(352) XResNTSC=(352) debugvar XResPAL "${XResPAL[*]}" debugvar XResNTSC "${XResNTSC[*]}" fi debugvar SLOW_CPU "$SLOW_CPU" if ! test -d "$DVDFiles"; then echolog "*** Option DVDFiles not set correctly! You will not be able to play VCD/DVD"; DVDFiles=""; fi debugvar DVDFiles "$DVDFiles" if ! test -b "$DVD"; then echolog "*** Option DVD not set correctly! You will not be able to play VCD/DVD"; DVD=""; fi debugvar DVD "$DVD" if test -z $DVDLANG; then DVDLANG="en"; fi debugvar DVDLANG "$DVDLANG" # extra DVD options debugvar DVDOPTIONS "$DVDOPTIONS" # extra VCD options debugvar VCDOPTIONS "$VCDOPTIONS" # play MPEG files without rescaling? if test -z "$MPEG_DIRECT" -o "$MPEG_DIRECT" != "false"; then MPEG_DIRECT="true"; fi debugvar MPEG_DIRECT "$MPEG_DIRECT" # get the file extension of the video SUFFIX=$(echo -e "${FILE:$[${#FILE}-4]:4}" | tr [A-Z] [a-z]) debugvar SUFFIX $SUFFIX if test -z "$MPLAYER_V1"; then echolog "*** MPLAYER_V1 not set! Setting it to 'false'." echolog "*** If you cannot play cue-files, then set it to 'true'." MPLAYER_V1="false" fi debugvar MPLAYER_V1 "$MPLAYER_V1" return; } function getvidxy () { # call: getvidxy # determine x and y resolution of the file! # output: variable ORIG_X and ORIG_Y (global) # variable definitions local TEMP1 MPLAYER_RETURN ORIG_X=0; ORIG_Y=0 TEMP1=`$MPLAYER -identify -vo null -ao null -frames 0 "$FILE" 2>/dev/null | grep -i -e "^ID_"` MPLAYER_RETURN=$? debugmsg "OutputFromMPLAYER:" "$TEMP1" debugmsg "MPLAYER_RETURN: " "$MPLAYER_RETURN" if test $MPLAYER_RETURN -ne 0; then echolog "*** FATAL: something went wrong analyzing the video; mplayer reported an error!" echolog "*** FATAL: check your mplayer installation. Exiting..." exit fi ORIG_X=`echo "$TEMP1"|grep ID_VIDEO_WIDTH|cut -d"=" -f2` debugmsg "parsed output for ORIG_X:" $ORIG_X ORIG_Y=`echo "$TEMP1"|grep ID_VIDEO_HEIGHT|cut -d"=" -f2` debugmsg "parsed output for ORIG_Y:" $ORIG_Y ORIG_FPS=`echo "$TEMP1"|grep ID_VIDEO_FPS|cut -d"=" -f2` debugmsg "parsed output for ORIG_FPS:" $ORIG_FPS ORIG_ASPECT=`echo "$TEMP1"|grep ID_VIDEO_ASPECT|cut -d"=" -f2` debugmsg "parsed output for ORIG_ASPECT:" $ORIG_ASPECT VIDEO_FORMAT=`echo "$TEMP1"|grep ID_VIDEO_FORMAT|cut -d"=" -f2` debugmsg "parsed output for VIDEO_FORMAT:" $VIDEO_FORMAT AUDIO_CODEC=`echo "$TEMP1"|grep ID_AUDIO_CODEC|cut -d"=" -f2` debugmsg "parsed output for AUDIO_CODEC:" $AUDIO_CODEC return; } function calcnewxy () { local -i MAX_X TEMP_ASPECT # TEMP_ASPECT=`echo $ORIG_ASPECT|sed 's/\.//'` # if test $TEMP_ASPECT -eq 0; then TEMP_ASPECT=$((4000/3)); fi if test $ORIG_X -gt 352 -o $ORIG_Y -gt $HALF_Y; then MAX_X=$(($FULL_Y*$TV_ASPECT)) else MAX_X=$(($HALF_Y*$TV_ASPECT)) fi debugvar MAX_X $MAX_X NEW_Y=$(($MAX_X*$ORIG_Y/$ORIG_X)); debugvar NEW_Y $NEW_Y echolog "*** INFO: For Sqare Pixels we would scale to $MAX_X x $NEW_Y ..." test $NEW_Y -gt $FULL_Y && NEW_Y=$FULL_Y # force full screen/ ignore aspect ratio! return; } function choosebestx () { local -i MAX_X INDEX local XResTEMP declare repeat=true INDEX=0 if $SLOW_CPU; then XResTEMP=(352) else if test $HALF_Y -eq 240; then XResTEMP=(${XResNTSC[*]}) else if test $HALF_Y -eq 288; then XResTEMP=(${XResPAL[*]}) else echolog "*** FATAL: HALF_Y not set or unknown: \"$HALF_Y\" ... Exiting." exit fi fi fi debugvar XResTEMP "${XResTEMP[*]}" ANZAHL=${#XResTEMP[*]} debugvar AnzahlVonXResTEMP $ANZAHL until ! $repeat; do if test ${XResTEMP[$INDEX]} -ge $ORIG_X; then repeat=false; NEW_X=${XResTEMP[$INDEX]}; fi INDEX=$(($INDEX+1)) if test $INDEX -ge $ANZAHL; then repeat=false; NEW_X=${XResTEMP[$ANZAHL-1]}; fi done debugvar NEW_X $NEW_X return; } function choosebesty () { if test \( $ORIG_Y -eq $HALF_Y -a $ORIG_X -eq 352 \) -o \( $ORIG_Y -eq $FULL_Y -a ! $SLOW_CPU \); then REAL_Y=$ORIG_Y NEW_Y=$ORIG_Y NEW_X=$ORIG_X debugmsg "setting NEW = ORIG" else if test $ORIG_X -gt 352 -o $ORIG_Y -gt $HALF_Y; then REAL_Y=$FULL_Y debugmsg "setting REAL_Y = FULL_Y" else REAL_Y=$HALF_Y debugmsg "setting REAL_Y = HALF_Y" fi fi return; } function set_ntsc () { HALF_Y=240 if $SLOW_CPU; then FULL_Y=$HALF_Y else FULL_Y=480 fi NEW_FPS="29.970" return; } function set_pal () { HALF_Y=288 if $SLOW_CPU; then FULL_Y=$HALF_Y else FULL_Y=576 fi NEW_FPS="25.000" return; } function checkforac3 () { if test "X$AUDIO_CODEC" == "Xa52" && $USEAC3; then AOUT="$AC3AOUT"; fi return; } function checktvnorm () { local -i TEMP_FPS TEMP_FPS=`echo $ORIG_FPS|sed 's/\.//'` if test $TEMP_FPS -ge "23000" -a $TEMP_FPS -le "24499"; then debugmsg "Film" if $NTSC; then set_ntsc else set_pal $USE_SPEED && SPEED="-speed 25:24" fi else if test \( $TEMP_FPS -ge "14000" -a $TEMP_FPS -le "16000" \) -o \( $TEMP_FPS -ge "29000" -a $TEMP_FPS -le "30499" \); then debugmsg "NTSC" if $NTSC; then set_ntsc else set_pal $USE_SPEED && SPEED="-speed 25:30" fi else debugmsg "PAL or unknown" $ORIG_FPS if $PAL; then set_pal else set_ntsc $USE_SPEED && SPEED="-speed 30:25" fi fi fi return; } function echolog () { # prints the string on stdout and into /var/log/messages using logger! logger -s -- "$1" return; } function errorcfg () { echolog "*** FATAL: Config Option $1 not found in config file ... Exiting." exit; } function debugvar () { if $DEBUG; then echolog "*** DEBUG: Variable $1 has value \"$2\""; fi return; } function debugmsg () { if $DEBUG; then echolog "*** DEBUG: $1 \"$2\""; fi return; } # begin main! # # # --------------------------------------------------------------------------- # # declare -i ORIG_X ORIG_Y declare -i NEW_X NEW_Y declare -i HALF_Y FULL_Y declare ORIG_FPS NEW_FPS ORIG_ASPECT VIDEO_FORMAT AUDIO_CODEC declare CMDLINE AOUT REMOTE USERDEF SUFFIX declare FILE="$1" declare SLAVE="$2" declare -a XResPAL[0] declare -a XResNTSC[0] declare FDSTR="" declare SUBTITLES="" echolog "*** Starting mplayer.sh Version $VERSION" if test -z "$FILE"; then echolog "*** USAGE: mplayer.sh <File_to_be_played>"; exit; fi if ! test -f "$FILE"; then echolog "*** ERROR: Make sure $FILE exists - otherwise it cannot be played ;-)"; exit; fi # Check if config file exists! declare CFGFIL="${0}.conf" debugvar CFGFIL $CFGFIL if ! test -f $CFGFIL; then echolog "*** FATAL: mplayer.sh.conf not found!!! Exiting." ; exit; fi # read config file and initialize the variables initialize if test \( "$FILE" == "$DVDFiles/DVD" -o "$FILE" == "$DVDFiles/VCD" \) -a -n "$DVDFiles" -a -n "$DVD"; then if test "$FILE" == "$DVDFiles/DVD"; then $USEAC3 && AOUT="$AC3AOUT" CMDLINE="$MPLAYER -vo $VO $AOUT -alang $DVDLANG $DVDOPTIONS $FDSTR $CACHESTR $REMOTE $USERDEF -dvd-device $DVD dvd://" fi if test "$FILE" == "$DVDFiles/VCD"; then CMDLINE="$MPLAYER -vo $VO $AOUT $VCDOPTIONS $FDSTR $CACHESTR $REMOTE $USERDEF -cdrom-device $DVD vcd://" fi unset FILE elif test "${SUFFIX}" == ".cue"; then if $MPLAYER_V1; then CMDLINE="$MPLAYER -vo $VO $AOUT $FDSTR $CACHESTR $REMOTE $USERDEF cue://$FILE:2" unset FILE else CMDLINE="$MPLAYER -vo $VO $AOUT $FDSTR $CACHESTR $REMOTE $USERDEF -vcd 2 -cuefile" fi else # Try to determine the video attributes if $DEBUG; then echolog "*** DEBUG: Calling getvidxy function to analyze source video stream ..."; fi getvidxy echolog "*** INFO: Source Video has Resolution of $ORIG_X x $ORIG_Y ..." if test $ORIG_X -eq 0 -o $ORIG_Y -eq 0; then echolog "*** FATAL: something went wrong analyzing the video; check your mplayer version ..."; exit; fi NEW_FPS=$ORIG_FPS if `echo "$VIDEO_FORMAT"| egrep -q "RV??"`; then FORCEIDX="-forceidx" else FORCEIDX="" fi checkforac3 checktvnorm calcnewxy choosebestx choosebesty if test $NEW_X -eq 0 -o $NEW_Y -eq 0; then echolog "*** FATAL: Illegal Resolution ..."; exit; fi if test $MPEG_DIRECT == "true" -a \( $VIDEO_FORMAT == "0x10000001" -o $VIDEO_FORMAT == "0x10000002" \) -a \( \ \( $PAL -a $NEW_FPS == "25.000" -a \( \( $ORIG_X == "352" -a $ORIG_Y == "288" \) -o \( $ORIG_Y == "576" -a \ \( $ORIG_X == "352" -o $ORIG_X == "480" -o $ORIG_X == "528" -o $ORIG_X == "688" -o $ORIG_X == "704" -o $ORIG_X == "720" \) \) \) \) -o \ \( $NTSC -a $NEW_FPS == "29.970" -a \( \( $ORIG_X == "352" -a $ORIG_Y == "240" \) -o \( $ORIG_Y == "480" -a \ \( $ORIG_X == "352" -o $ORIG_X == "480" -o $ORIG_X == "512" -o $ORIG_X == "640" -o $ORIG_X == "704" -o $ORIG_X == "720" \) \) \) \) \ \) ; then CMDLINE="$MPLAYER -vo $VO $AOUT $FDSTR $CACHESTR $REMOTE $USERDEF" else CMDLINE="$MPLAYER -vo $VO $AOUT -vop $VOP:$NEW_FPS,expand=$NEW_X:$REAL_Y:-1:-1:1,scale=$NEW_X:$NEW_Y $SPEED $FDSTR $CACHESTR $REMOTE $SUBTITLES $USERDEF $FORCEIDX" fi fi debugvar CMDLINE "$CMDLINE" exec $CMDLINE "$FILE" exit
-
Hochschieb
Hallo
Das interessiert mich auch brennend!
Am besten sollte es so wie beim mp3-Plugin funktionieren. Man wählt eine Datei mit der Streaming-Adresse aus und dann streamt er das Video.
Soweit die Theorie. Zuerst dachte ich, das das nie funktionieren würde, aber dann sah ich diesen Thread!
Insbesondere Giga dürfte kompliziert werden, denn das hat ein spezielles Streaming-Typ (nsv) das der mplayer bestimmt nicht absielen kann, oder?Kann da jemand der sich mit sowas auskennt ein kleines howto für linvdr schreiben, damit man Videos aus dem Internet auf den TV streamen kann?
Bitteee!Gruß,
Sandy -
-
Es ist ansich ganz einfach, es funzt also, Giga sowieso.
Wie oben erwähnt, isses für die Standard-mplayer.sh ganz einfach.
Die spezielle mplayer.sh, wie sie auch bei linvdr Verwendung findet, muss angepasst werden. Ich nutzte diese nicht, müsste erstmal die zum loofen bringen.Teste es doch mal während der VDR aus ist per "mplayer -vo mpegpes http://broadcast.giga.de:80/;stream.nsv" (falls du ne FF hast), setzt vorraus, dass die entsprechenden Codecs nach Anleitung des mplayer (bei giga also vfwvp6.dll) installiert sind. . Das weiss ich halt net beim linvdr.
EDIT :
Also mal einfach nach Zeile 487 in obiger mplayer.sh aus linvdr eingeben (am besten die originale mplayer.sh als Backup kopieren ('cp mplayer.sh mplayer.sh.orig')):Codeelif test "${SUFFIX}" == ".stream"; then CMDLINE="$MPLAYER -vo $VO $FDSTR $CACHESTR $REMOTE $USERDEF `cat $FILE`" unset $FILE fi
D.h. Die Adresse des Streams in eine Datei mit der Endung .stream eingeben (also bei Giga 'echo "http://broadcast.giga.de:80/;stream.nsv" > giga_tv.stream'), im Mplayer-Plugin wählt man die Tadei aus.Keine Gewähr auf Funktion, kann wie erwähnt den Code nicht testen.
Setzt die installierten Codecs des Mplayer vorraus, einfach mal ausprobieren. -
Hallo skan!
Vielen dank für Deine hilfe!
Da meine mplayer.sh etwas anders aussieht, bzw. die Zeilenzahl was anders aussieht, habe ich versucht die richtige Stelle in meiner mplayer.sh zu finden. Fündig bin ich bei Zeile 532 geworden. Da habe ich dann Deinen Code reingetan.Leider geht nun der mplayer nicht (gut das ich die Datei sicherte wie Du empfohlen hast )
Habe ich da irgendwas falsch gemacht, vielleicht doch an die falsche Stelle kopiert?Gruß,
Sandy -
-
-
...oder 'whereis' oder 'which'
-
-
hallo skan!
Also habe es wieder brav an die Stelle vor dem "else" kopiert wie vorher auch, aber der mplayer geht immer noch nicht mit der Modifikation. Kann keine Videos mehr abspielen, fliege sofort wieder zum TV-Bild.
Gruß,
SandyPS: muss das fi eigentlich am anfang der Zeile stehen oder ist das egal? weil in mplayer sind die anderen "fi" weiter in der Zeile gerückt.
Gruß,
Sandy -
-
ach, jetzt das fi komplett weglassen?
also dann so:
http://paste.phpfi.com/53685 (Zeile 532 - 534) ?Mit dieser Modifikation funktioniert mplayer wieder. Nur das mit dem Stream muss ich noch ausprobieren, ob das nun funktioniert. Muss ich erst den Codec finden für giga.
Gruß,
Sandy -
Exakt.
-
Jo, das mim Codec ist dann folgendermaßen :
Der Mplayer muss unter '$PREFIX/lib/codecs' die Codecs von der Mplayer-Seite http://www4.mplayerhq.hu/homepage/design7/codecs.html installiert haben. Danach muss er neu übersetzt werden ('./configure' stellt dann alles richtig ein).
Glaube aber nicht, dass das bei euch linvdr'lern der Fall ist. Kann sein, dass ein einfaches installieren der Codecs an die entsprechende Stelle ausreicht. Nur dazu kenn ich linvdr leider nicht....
Also als Tipp: Finde mal dieses Verzeichnis mit den Codecs (wahrscheinlich '/usr/lib/codecs'), dort müsste die Tadei vfwvp6.dll stecken. Wenns der Fall ist, iss alles rischtisch.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!