[Solved] yaVDR mit softhddevice: kein Bild

Hallo,

ich möchte meinen alten VDR ersetzen durch einen HD-tauglichen. Ich habe mir als Hardware zugelegt:
- eine Cine-S2
- ein ASROCK ION 330-Board
- eine X10-USB Remote

damit habe ich erstmal eine Laborinstallation aufgebaut und yaVDR 0.5a hybrid installiert.

Soweit so gut,

nach Installation funktioniert auch erstmal vieles, wenn ich im WEB-configurator xine als frontend auswähle, kommt auch das gewohnte VDR-Bild auf den Monitor. FB geht auch.
Wenn ich aber softhddevice als frontend wähle, erscheint nur ein Mauszeiger, aber kein VDR-Bild.

Wie gehe ich jetzt da vor, was muss ich tun, um den Fehler aufzuspüren? Ich möchte das natürlich gerne selbst rausbekommen, habe aber bisher mit vdpau, ION330 usw noch keine Erfahrungen gesammelt. Bisher hatte ich nur FF-SD-Karten.

Viele Grüße

callahan

hier die var/log/syslog:

Feb 16 11:52:38 yavdr vdr: [2603] section handler thread started (pid=2537, tid=2603)
Feb 16 11:52:38 yavdr vdr: [2537] dynamite: /dev/dvb/adapter1/frontend0 is a dvb adapter trying to set card index to 1
Feb 16 11:52:38 yavdr vdr: [2537] new sub-device number 2
Feb 16 11:52:38 yavdr vdr: [2537] frontend 1/0 provides DVB-S,DVB-S2 with QPSK ("STV090x Multistandard")
Feb 16 11:52:38 yavdr vdr: [2605] tuner on frontend 1/0 thread started (pid=2537, tid=2605)
Feb 16 11:52:38 yavdr vdr: [2537] dynamite: attached device /dev/dvb/adapter1/frontend0 to dynamic device slot 2
Feb 16 11:52:38 yavdr vdr: [2606] section handler thread started (pid=2537, tid=2606)
Feb 16 11:52:38 yavdr vdr: [2537] dynamite: /dev/dvb/adapter0/frontend0 is a dvb adapter trying to set card index to 0
Feb 16 11:52:38 yavdr vdr: [2537] dynamite: /dev/dvb/adapter0/frontend0 is already attached
Feb 16 11:52:38 yavdr vdr: [2537] dynamite: /dev/dvb/adapter1/frontend0 is a dvb adapter trying to set card index to 1
Feb 16 11:52:38 yavdr vdr: [2537] dynamite: /dev/dvb/adapter1/frontend0 is already attached
Feb 16 11:52:38 yavdr vdr: [2537] setting primary device to 9
Feb 16 11:52:38 yavdr vdr: [2537] [softhddev]MakePrimaryDevice: 1
Feb 16 11:52:38 yavdr vdr: [2537] [softhddev]SetVideoFormat: 0
Feb 16 11:52:38 yavdr vdr: [2537] [softhddev]SetVideoDisplayFormat: 1
Feb 16 11:52:38 yavdr vdr: [2537] [softhddev]SetVolumeDevice: 250
Feb 16 11:52:38 yavdr vdr: [2537] assuming manual start of VDR
Feb 16 11:52:38 yavdr vdr: [2537] SVDRP listening on port 6419
Feb 16 11:52:38 yavdr vdr: [2537] skin "anthra_1920_FSE" not available - using "sttng" instead
Feb 16 11:52:38 yavdr vdr: [2537] loading /var/lib/vdr/themes/sttng-default.theme
Feb 16 11:52:38 yavdr vdr: [2537] starting plugin: softhddevice
Feb 16 11:52:38 yavdr vdr: [softhddev] ready detached
Feb 16 11:52:38 yavdr vdr: [2537] starting plugin: text2skin
Feb 16 11:52:38 yavdr vdr: [2537] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1920_FSE/anthra_1920_FSE.colors
Feb 16 11:52:38 yavdr vdr: [2537] parsing /var/lib/vdr/plugins/text2skin/anthra_1920_FSE/anthra_1920_FSE.skin
Feb 16 11:52:38 yavdr vdr: [2537] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1920_FS/anthra_1920_FS.colors
Feb 16 11:52:38 yavdr vdr: [2537] parsing /var/lib/vdr/plugins/text2skin/anthra_1920_FS/anthra_1920_FS.skin
Feb 16 11:52:38 yavdr vdr: [2537] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1920_OS/anthra_1920_OS.colors
Feb 16 11:52:38 yavdr vdr: [2537] parsing /var/lib/vdr/plugins/text2skin/anthra_1920_OS/anthra_1920_OS.skin
Feb 16 11:52:38 yavdr vdr: [2537] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1280_OS/anthra_1280_OS.colors
Feb 16 11:52:38 yavdr vdr: [2537] parsing /var/lib/vdr/plugins/text2skin/anthra_1280_OS/anthra_1280_OS.skin
Feb 16 11:52:38 yavdr vdr: [2537] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1280_FS/anthra_1280_FS.colors
Feb 16 11:52:38 yavdr vdr: [2537] parsing /var/lib/vdr/plugins/text2skin/anthra_1280_FS/anthra_1280_FS.skin
Feb 16 11:52:38 yavdr vdr: [2537] text2skin: loading /var/lib/vdr/plugins/text2skin/NarrowHD/NarrowHD.colors
Feb 16 11:52:38 yavdr vdr: [2537] parsing /var/lib/vdr/plugins/text2skin/NarrowHD/NarrowHD.skin
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: menuorg
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: extrecmenu
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: quickepgsearch
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: epgsearch
Feb 16 11:52:39 yavdr vdr: [2537] loading /var/lib/vdr/plugins/epgsearch/epgsearchcats.conf
Feb 16 11:52:39 yavdr vdr: [2537] loading /var/lib/vdr/plugins/epgsearch/epgsearchmenu.conf
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: restfulapi
Feb 16 11:52:39 yavdr vdr: [2537] restfulapi: Used settings: port: 8002, ip: 0.0.0.0, eimgs: , cimgs: , headers: activated
Feb 16 11:52:39 yavdr vdr: [2537] restfulapi: found 27 files in /*.
Feb 16 11:52:39 yavdr vdr: [2537] restfulapi: found 27 files in /*.
Feb 16 11:52:39 yavdr vdr: [2537] restfulapi: Initializing inotify for epgimages or channellogos failed! (Check restfulapi-settings!)
Feb 16 11:52:39 yavdr vdr: [2537] restfulapi: Initializing inotify for epgimages or channellogos failed! (Check restfulapi-settings!)
Feb 16 11:52:39 yavdr vdr: [2537] create server
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: conflictcheckonly
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: markad
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: iptv
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: skinpearlhd
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: epgsearchonly
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: wirbelscan
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: channellists
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: streamdev-server
Feb 16 11:52:39 yavdr vdr: [2537] loading /var/lib/vdr/plugins/streamdev-server/streamdevhosts.conf
Feb 16 11:52:39 yavdr vdr: [2639] EPGSearch: conflictcheck thread started (pid=2537, tid=2639)
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: femon
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: dbus2vdr
Feb 16 11:52:39 yavdr vdr: [2638] extrecmenu worker thread thread started (pid=2537, tid=2638)
Feb 16 11:52:39 yavdr vdr: [2537] dbus2vdr: new message dispatcher for interface de.tvdr.vdr.epg
Feb 16 11:52:39 yavdr vdr: [2537] dbus2vdr: new message dispatcher for interface de.tvdr.vdr.osd
Feb 16 11:52:39 yavdr vdr: [2537] dbus2vdr: new message dispatcher for interface de.tvdr.vdr.plugin
Feb 16 11:52:39 yavdr vdr: [2537] dbus2vdr: new message dispatcher for interface de.tvdr.vdr.recording
Feb 16 11:52:39 yavdr vdr: [2537] dbus2vdr: new message dispatcher for interface de.tvdr.vdr.remote
Feb 16 11:52:39 yavdr vdr: [2537] dbus2vdr: new message dispatcher for interface de.tvdr.vdr.setup
Feb 16 11:52:39 yavdr vdr: [2537] dbus2vdr: new message dispatcher for interface de.tvdr.vdr.shutdown
Feb 16 11:52:39 yavdr vdr: [2537] dbus2vdr: new message dispatcher for interface de.tvdr.vdr.skin
Feb 16 11:52:39 yavdr vdr: [2537] dbus2vdr: new message dispatcher for interface de.tvdr.vdr.timer
Feb 16 11:52:39 yavdr vdr: [2537] dbus2vdr: StartMonitor Lock
Feb 16 11:52:39 yavdr vdr: [2645] streamdev server thread started (pid=2537, tid=2645)
Feb 16 11:52:39 yavdr vdr: [2647] dbus2vdr: monitor started on bus de.tvdr.vdr
Feb 16 11:52:39 yavdr vdr: [2645] Streamdev: Listening (VTP) on port 2004
Feb 16 11:52:39 yavdr vdr: [2645] Streamdev: Listening (HTTP) on port 3000
Feb 16 11:52:39 yavdr vdr: [2537] dbus2vdr: StartMonitor Unlock 2
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: xvdr
Feb 16 11:52:39 yavdr vdr: [2647] dbus2vdr: Action Lock
Feb 16 11:52:39 yavdr vdr: [2537] XVDR: XVDR Server started
Feb 16 11:52:39 yavdr vdr: [2537] XVDR: Channel streaming timeout: 10 seconds
Feb 16 11:52:39 yavdr vdr: [2537] starting plugin: live
Feb 16 11:52:39 yavdr vdr: [2647] dbus2vdr: try to connect to system bus
Feb 16 11:52:39 yavdr vdr: [2647] dbus2vdr: connect to system bus successful
Feb 16 11:52:39 yavdr rsyslogd-2177: imuxsock begins to drop messages from pid 2537 due to rate-limiting
Feb 16 11:52:39 yavdr kernel: [ 1600.091676] init: wait-for-job-state (vdr-frontendvdr) main process (2633) killed by TERM signal
Feb 16 11:52:39 yavdr /usr/bin/signal-event.real[2410]: finished processing signal change-frontend
Feb 16 11:52:44 yavdr rsyslogd-2177: imuxsock lost 38 messages from pid 2537 due to rate-limiting
Feb 16 11:52:44 yavdr vdr: [2666] Text2Skin: channelInfo display update thread ended (pid=2537, tid=2666)
Feb 16 11:52:52 yavdr /usr/bin/signal-event.real[2816]: processing signal restart-vdr
Feb 16 11:52:52 yavdr /usr/bin/signal-event.real[2816]: processing action /usr/share/yavdr/events/restart-vdr/10_restart-vdr restart-vdr
Feb 16 11:53:14 yavdr vdr: [2820] Text2Skin: menu display update thread started (pid=2537, tid=2820)
Feb 16 11:53:15 yavdr vdr: [2820] Text2Skin: menu display update thread ended (pid=2537, tid=2820)
Feb 16 11:53:15 yavdr vdr: [2824] Text2Skin: menu display update thread started (pid=2537, tid=2824)
Feb 16 11:53:15 yavdr vdr: [2824] Text2Skin: menu display update thread ended (pid=2537, tid=2824)
Feb 16 11:53:16 yavdr vdr: [2825] Text2Skin: menu display update thread started (pid=2537, tid=2825)
Feb 16 11:54:07 yavdr anacron[1314]: Job `cron.daily' terminated
Feb 16 11:54:07 yavdr anacron[1314]: Normal exit (1 job run)
Feb 16 12:02:54 yavdr kernel: [ 2214.570232] init: tntnet main process (1068) terminated with status 111
Feb 16 12:02:54 yavdr kernel: [ 2214.570376] init: tntnet main process ended, respawning
Feb 16 12:17:01 yavdr CRON[3005]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)

Die Kernel.log sagt:

[ 14.127887] IR MCE Keyboard/mouse protocol handler initialized
[ 14.317535] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.349192] lirc_dev: IR Remote Control driver registered, major 249
[ 14.351099] IR LIRC bridge handler initialized
[ 16.162837] input: lircd as /devices/virtual/input/input5
[ 17.604300] NVRM: Your system is not currently configured to drive a VGA console
[ 17.604319] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 17.604331] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 17.604341] NVRM: drivers including, but not limited to, vesafb, may result in
[ 17.604350] NVRM: corruption and stability problems, and is not supported.
[ 17.621072] init: failsafe main process (799) killed by TERM signal
[ 18.972076] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 18.972437] NFSD: starting 90-second grace period
[ 19.689287] init: wait-for-job-state (vdr-frontendvdr) main process (1538) killed by TERM signal
[ 19.972117] init: plymouth-stop pre-start process (1623) terminated with status 1
[ 24.320056] eth0: no IPv6 routers present

Ist hier das Problem benannt? Was muss ich denn tun, um dies richtig zu konfigurieren? Oder geht softhddevice nur über den HDMI?

Ok, habe ich beides gemacht. Ich habe
a) ein update durchgeführt (es wurden tatsächlich einige Pakete aktualisiert)
b) die drei IPTV-Kanäle gelöscht und die FTA HD-Kanäle von ASTRA dazugefügt

--> leider keine Änderung.

Den VDR betreibe ich derzeit am digitalen VGA

So, Problem gelöst.

Zwei Dinge habe ich geändert, was da die Ursache war, weiss ich nicht:

a) Den Speicher für die Grafikkarte erhöht (war auf 32 MB, erhöht auf 128)
b) Der Onboard-Sound war ausgeschaltet.

Aha, ok Danke. Mach ich gleich.

Jetzt funktioniert alles schon mal ganz gut. Das web-interface ist ja echt klasse.

Jetzt brauch ich noch ein lüfterloses Netzteil. Reicht eine picoPSU 120 oder lieber eine andere

Das stimmt. Der quirl auf der CPU muss auf jeden Fall weg. Im Prinzip Suche ich da nach einer netten gesamtlösung.