Hi
I am having problems with tevii s480 on yavdr 3.0a.well although i can scan hotbird i barely can open fta channels and if they open it happens after many minutes.i will put here my logs as i dont know where it might be the problemits been a week testing it and i cant find a solution.
dmesg: http://pastebin.com/2KiCY7Te
/var/log/messages http://pastebin.com/YeVGGyQA
/var/log/user.log http://pastebin.com/fuHrkjVG
/var/log/syslog http://pastebin.com/LJcix5Yp
would appreciate any help
problems with tevii s480
- mushroom
- Geschlossen
-
-
Could you give me some informations of your s480 driver and used hardware? Your Hardware info please in the signature, this would help everyone to know what you are using.
I hope you ´ve choosen the liplianin from unstable because this one is the newest.
And please post me your "dmesg | dvb" and "dmesg | grep firmware"edit :
it seems to be that your system founds only 1 dvb adapter from tevii. Maybe you run into the initialisation bug of the first series with certain mainboards. -
well,thanks for the quick reply
here are some resultsZitatdmesg | grep dvb[ 10.129878] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware[ 10.129882] usb 3-1: firmware: requesting dvb-usb-s660.fw[ 10.296646] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'[ 10.448548] dvb-usb: found a 'TeVii S660 USB' in warm state.[ 10.448596] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.[ 10.700161] dvb-usb: MAC address: 00:18:bd:5b:54:64[ 10.715400] dvb-usb: schedule remote query interval to 150 msecs.[ 10.715404] dvb-usb: TeVii S660 USB successfully initialized and connected.[ 10.715425] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware[ 10.715430] usb 4-1: firmware: requesting dvb-usb-s660.fw[ 10.719495] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'[ 10.872013] dvb-usb: found a 'TeVii S660 USB' in warm state.[ 10.872064] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.[ 11.112737] dvb-usb: MAC address: 00:18:bd:5b:54:65[ 11.117970] dvb-usb: schedule remote query interval to 150 msecs.[ 11.117975] dvb-usb: TeVii S660 USB successfully initialized and connected
Zitatdmesg | grep firmware[ 10.129878] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware[ 10.129882] usb 3-1: firmware: requesting dvb-usb-s660.fw[ 10.296646] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'[ 10.296649] dw2102: start downloading DW210X firmware[ 10.715425] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware[ 10.715430] usb 4-1: firmware: requesting dvb-usb-s660.fw[ 10.719495] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'[ 10.719499] dw2102: start downloading DW210X firmware
i used this driver
https: / /launchpad.net/~yaVDR/+archive/testing-vdr/+~files/s2-liplianin-dkms_0 20110319.15386_all.deb dpkg-i-s2-liplianin dkms_0 ~ 20110319.15386_all.debAs for hardware info how can i check without open the box?
someone built it for me and have no idea what he used
if the card has a problem with motherboard i must use the card on another pc.Before i was using tevii s660 and i had no problems.does it matter that now i have only a single cable connected to s480? -
does it matter that now i have only a single cable connected to s480?
Yes, it does. VDR will use all DVB devices by default. You may use LNB sharing to provide a signal on both tuners. Or start VDR with -D Option. Man VDR
regards -
you have both tuners running (usb3-1 & 4-1)(frontend 0.1 + 0.0), so you don´t have to be afraid of having an initialisation problem. In syslog you can see that both frontends are used although you have connected only one cable. My advice is to try the lnbsharing patch with a 2way splitter with dc cut or like khl1309 said the -d option. the lnb-sharing is a patch for the vdr and gives you the ability to use both tuners, when they are on the same band.
Did you connect the power cable to the tevii card? It is necessary using LNB power without a disque switch. That could be also a reason for "lost lock" messages or the signal himself is weak.
-
well i connect a second cable ,scanned hotbird on both tuners and found all channels.But problems appeared since then.well as i zap to another channel sometimes vdr freezes,i cannot ssh to the box and web interface stops.if i finally start vdr by ssh i get distorted sound and picture.I didnt say that before but i have one motorised dish and a second one with two lnb (hotbird and eutelsat 7e).is it necessary to use lnb sharing patch?
ZitatDid you connect the power cable to the tevii card? It is necessary using
LNB power without a disque switch. That could be also a reason for
"lost lock" messages or the signal himself is weak.What power cable? maybe you confused my card with tevii s660 usb one
Maybe the problem is that i didnt setup disecq.conf?Forgot to say that sometimes vdr freezes or pc restarts.
-
The S480 have a power connector at the side for a 3,5 floppy power connector. It must be used when you powers the lnb with your card. If you use an active diseque switch it´s not necessary.
You have to activate Diseque in the LNB Menue and make a diseque.conf according to your satellite configuration.It´s not wrong to connect the power cable anyway.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!