Hi,
ich habde folgendes Problem. Nach dem Umbau auf ein neues Board und Prozessor startet mein VDR nicht mehr und leider weiß ich nicht woran es liegt.
Hier das logread:
Code
Oct 11 22:55:26 linvdr user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
Oct 11 22:55:26 linvdr user.warn kernel: saa7146: unregister extension 'budget_av'.
Oct 11 22:55:26 linvdr user.warn kernel: saa7146: unregister extension 'budget_ci dvb'.
Oct 11 22:55:26 linvdr user.warn kernel: saa7146: unregister extension 'budget dvb'.
Oct 11 22:55:26 linvdr user.warn kernel: saa7146: unregister extension 'dvb'.
Oct 11 22:55:31 linvdr user.info kernel: Linux video capture interface: v2.00
Oct 11 22:55:31 linvdr user.warn kernel: saa7146: register extension 'dvb'.
Oct 11 22:55:31 linvdr user.info kernel: GSI 16 (level, high) -> IRQ 19
Oct 11 22:55:31 linvdr user.warn kernel: found saa7146 @ mem f8cd0000 (revision 1, irq 19) (0x13c2,0x0003).
Oct 11 22:55:31 linvdr user.warn kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
Oct 11 22:55:31 linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:23:89:5b
Oct 11 22:55:31 linvdr user.err kernel: dvb-ttpci: load_dram(): timeout at block 0
Oct 11 22:55:31 linvdr user.err kernel: dvb-ttpci: av7110_bootarm(): load_dram() failed
Oct 11 22:55:31 linvdr user.info kernel: ACPI: PCI interrupt for device 0000:01:0a.0 disabled
Oct 11 22:55:31 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
Oct 11 22:55:31 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
Oct 11 22:55:31 linvdr user.warn kernel: saa7146: register extension 'budget_av'.
Oct 11 22:55:31 linvdr user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 11 22:55:31 linvdr user.info vdr: [3093] VDR version 1.4.7-ext34-sc started
Oct 11 22:55:31 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-arghdirector.so.1.4.5
Oct 11 22:55:31 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-channelscan.so.1.4.5
Oct 11 22:55:31 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-coverviewer.so.1.4.5
Oct 11 22:55:31 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-director.so.1.4.5
Oct 11 22:55:31 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 11 22:55:31 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-dvdswitch.so.1.4.5
Oct 11 22:55:31 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-epgsearch.so.1.4.5
Oct 11 22:55:31 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 11 22:55:31 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-filebrowser.so.1.4.5
Oct 11 22:55:31 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-games.so.1.4.5
Oct 11 22:55:31 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-graphlcd.so.1.4.5
Oct 11 22:55:31 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-hdmonitor.so.1.4.5
Oct 11 22:55:31 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-mp3.so.1.4.5
Oct 11 22:55:31 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-sleeptimer.so.1.4.5
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-streamdev-server.so.1.4.5
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-sysinfo.so.1.4.5
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-text2skin.so.1.4.5
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-timeline.so.1.4.5
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-vcd.so.1.4.5
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-yaepg.so.1.4.5
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-remote.so.1.4.5
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading plugin: /usr/lib/vdr/plugins/libvdr-burn.so.1.4.5
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading /etc/vdr/setup.conf
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: ^ASDSkin = DeepBlue
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: BootForSwitchTimer = 0
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: BufferTimeOut = 30
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: ConfirmSwitchTimers = 0
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: ConfirmSwitchTimersTimeout = 30
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: DirectChannelListSwitch = 0
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: Frameswait = 0
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: KeepBuffer = 0
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: KeepLastBuffer = 0
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: LiveReplay = 0
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: LoadMarksInterval = 0
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: LocalChannelProvide = 1
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: MinLiveBufferInactivity = 0
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: noEPGPatch = 1
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: NumLastBuffers = 1
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: ShowTimerInfo = 1
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: SortRecords = 2
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: SortRecordsHelper = 2
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: SortSwitchTimersSep = 1
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: SortTimers = 1
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: UseRepacker = 1
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: unknown config parameter: filebrowser.BaseDir = /
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading /etc/vdr/sources.conf
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading /etc/vdr/diseqc.conf
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading /etc/vdr/channels.conf
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading /etc/vdr/timers.conf
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading /etc/vdr/commands.conf
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading /etc/vdr/reccmds.conf
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading /etc/vdr/svdrphosts.conf
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading /etc/vdr/remote.conf
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading /etc/vdr/keymacros.conf
Oct 11 22:55:32 linvdr user.debug vdr: [3097] video directory scanner thread started (pid=3097, tid=3097)
Oct 11 22:55:32 linvdr user.debug vdr: [3097] video directory scanner thread ended (pid=3097, tid=3097)
Oct 11 22:55:32 linvdr user.debug vdr: [3098] video directory scanner thread started (pid=3098, tid=3098)
Oct 11 22:55:32 linvdr user.debug vdr: [3098] video directory scanner thread ended (pid=3098, tid=3098)
Oct 11 22:55:32 linvdr user.debug vdr: [3093] reading EPG data from /video0/epg.data
Oct 11 22:55:32 linvdr user.debug vdr: [3093] probing /dev/dvb/adapter0/frontend0
Oct 11 22:55:32 linvdr user.info vdr: [3093] no DVB device found
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: arghdirector (0.2.6): plugin to use the premiere multifeed option
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: channelscan (0.1.0): Plugin for satelite scan
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: coverviewer (0.0.2): An Cover Viewer for music plugin
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: director (0.2.8): plugin to use the premiere multifeed option
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: dvd (0.3.6-b03): turn VDR into an (almost) full featured DVD player
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: dvdswitch (0.1.3): allowed to play DVD-Images
Oct 11 22:55:32 linvdr user.err vdr: [3093] dvdswitch: no translation found for 'Open' in language 1 (Deutsch)
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: epgsearch (0.9.23): search the EPG for repeats and more
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: femon (1.1.3): DVB Signal Information Monitor (OSD)
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: filebrowser (0.0.6): Plugin to browse through files and execute actions on them
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: games (0.6.3): OSD Games Collection
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: graphlcd (0.1.5): Output to graphic LCD
Oct 11 22:55:32 linvdr user.info vdr: [3093] graphlcd plugin: No config file specified, using default (/etc/graphlcd.conf).
Oct 11 22:55:32 linvdr user.info vdr: [3093] graphlcd plugin: WARNING: No display specified, using first one (t6963c).
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: hdmonitor (0.0.1): Festplatten-Monitor
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: mp3 (0.10.1): A versatile audio player
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading /etc/vdr/plugins/mp3sources.conf
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading id3 cache from /video0/id3info.cache
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: mplayer (0.10.1): Media replay via MPlayer
Oct 11 22:55:32 linvdr user.info vdr: [3093] loading /etc/vdr/plugins/mplayersources.conf
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: sleeptimer (0.6): Sleep-Timer for VDR
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: streamdev-server (0.3.3-20070509): VDR Streaming Server
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: sysinfo (0.1.0a): System information plugin
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: text2skin (1.1-cvs_ext-0.10): Loader for text-based skins
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: timeline (0.9.0): Show timer overview and collisions
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: vcd (0.7): VideoCD Player
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: yaepg (0.0.2): Yet Another EPG
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: remote (0.3.9): Remote control
Oct 11 22:55:32 linvdr user.info vdr: [3093] initializing plugin: burn (0.0.10): Versatile convert-and-burn plugin
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: invalid primary device number: 1
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: no primary device found - using first device!
Oct 11 22:55:32 linvdr user.err vdr: [3093] ERROR: invalid primary device number: 1
Oct 11 22:55:32 linvdr user.info vdr: [3093] deleting plugin: burn
Oct 11 22:55:32 linvdr user.info vdr: [3093] deleting plugin: remote
Oct 11 22:55:32 linvdr user.info vdr: [3093] deleting plugin: yaepg
Oct 11 22:55:32 linvdr user.info vdr: [3093] deleting plugin: vcd
Oct 11 22:55:32 linvdr user.info vdr: [3093] deleting plugin: timeline
Oct 11 22:55:32 linvdr user.info vdr: [3093] deleting plugin: text2skin
Oct 11 22:55:32 linvdr user.info vdr: [3093] deleting plugin: sysinfo
Oct 11 22:55:32 linvdr user.info vdr: [3093] deleting plugin: streamdev-server
Oct 11 22:55:32 linvdr user.info vdr: [3093] deleting plugin: sleeptimer
Oct 11 22:55:32 linvdr user.info vdr: [3093] deleting plugin: mplayer
Oct 11 22:55:32 linvdr user.info vdr: [3093] deleting plugin: mp3
Oct 11 22:55:32 linvdr user.info vdr: [3093] deleting plugin: hdmonitor
Oct 11 22:55:32 linvdr user.info vdr: [3093] deleting plugin: graphlcd
Oct 11 22:55:32 linvdr user.debug vdr: [3102] glcd_display thread started (pid=3102, tid=3102)
Oct 11 22:55:32 linvdr user.debug vdr: t6963c: Testing ECP mode...
Oct 11 22:55:32 linvdr user.debug vdr: t6963c: working!
Oct 11 22:55:32 linvdr user.info vdr: t6963c: T6963 initialized.
Oct 11 22:55:35 linvdr user.err vdr: [3093] ERROR: glcd_display thread 3102 won't end (waited 3 seconds) - canceling it...
Oct 11 22:55:35 linvdr user.info vdr: [3093] deleting plugin: games
Oct 11 22:55:35 linvdr user.info vdr: [3093] deleting plugin: filebrowser
Oct 11 22:55:35 linvdr user.info vdr: [3093] deleting plugin: femon
Oct 11 22:55:35 linvdr user.info vdr: [3093] deleting plugin: epgsearch
Oct 11 22:55:35 linvdr user.info vdr: [3093] deleting plugin: dvdswitch
Oct 11 22:55:35 linvdr user.info vdr: [3093] deleting plugin: dvd
Oct 11 22:55:35 linvdr user.info vdr: [3093] deleting plugin: director
Oct 11 22:55:35 linvdr user.info vdr: [3093] deleting plugin: coverviewer
Oct 11 22:55:35 linvdr user.info vdr: [3093] deleting plugin: channelscan
Oct 11 22:55:35 linvdr user.info vdr: [3093] deleting plugin: arghdirector
Oct 11 22:55:35 linvdr user.debug vdr: [3093] max. latency time 0 seconds
Oct 11 22:55:35 linvdr user.info vdr: [3093] exiting
Display More
lspci
Code
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio Processing Unit (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:0c.0 PCI bridge: nVidia Corporation nForce2 PCI Bridge (rev a3)
00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller [Tornado] (rev 40)
03:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] (rev b2)
Display More
lspci -vv
Code
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80ac
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [40] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=x1
Capabilities: [60] #08 [2001]
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [48] #08 [01e1]
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: ASUSTeK Computer Inc.: Unknown device 0c11
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at e400 [size=32]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e1087000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e1082000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e1083000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] #0a [2080]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard onboard nForce2 Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e1086000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d000 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio Processing Unit (rev a2)
Subsystem: ASUSTeK Computer Inc.: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 3000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e1000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
Subsystem: ASUSTeK Computer Inc. nForce2 AC97 Audio Controler (MCP)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at d400 [size=256]
Region 1: I/O ports at d800 [size=128]
Region 2: Memory at e1080000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: e0000000-e0ffffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc.: Unknown device 0c11
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled]
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 PCI bridge: nVidia Corporation nForce2 PCI Bridge (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dc000000-ddffffff
Prefetchable memory behind bridge: 50000000-500fffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 809a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e1084000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e1085000 (32-bit, non-prefetchable) [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: de000000-dfffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
01:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Technotrend/Hauppauge DVB card rev2.1
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 19
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=512]
02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller [Tornado] (rev 40)
Subsystem: ASUSTeK Computer Inc. A7N8X Deluxe onboard 3C920B-EMB Integrated Fast Ethernet Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c000 [size=128]
Region 1: Memory at dd000000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 50000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
03:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 8393
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at df000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Display More
dmesg
Code
C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19
saa7146: found saa7146 @ mem f8cd0000 (revision 1, irq 19) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:23:89:5b
dvb-ttpci: load_dram(): timeout at block 0
dvb-ttpci: av7110_bootarm(): load_dram() failed
ACPI: PCI interrupt for device 0000:01:0a.0 disabled
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19
saa7146: found saa7146 @ mem f8cd0000 (revision 1, irq 19) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:23:89:5b
dvb-ttpci: load_dram(): timeout at block 0
dvb-ttpci: av7110_bootarm(): load_dram() failed
ACPI: PCI interrupt for device 0000:01:0a.0 disabled
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19
saa7146: found saa7146 @ mem f8cd0000 (revision 1, irq 19) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:23:89:5b
dvb-ttpci: load_dram(): timeout at block 0
dvb-ttpci: av7110_bootarm(): load_dram() failed
ACPI: PCI interrupt for device 0000:01:0a.0 disabled
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19
saa7146: found saa7146 @ mem f8cd0000 (revision 1, irq 19) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:23:89:5b
dvb-ttpci: load_dram(): timeout at block 0
dvb-ttpci: av7110_bootarm(): load_dram() failed
ACPI: PCI interrupt for device 0000:01:0a.0 disabled
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19
saa7146: found saa7146 @ mem f8cd0000 (revision 1, irq 19) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:23:89:5b
dvb-ttpci: load_dram(): timeout at block 0
dvb-ttpci: av7110_bootarm(): load_dram() failed
ACPI: PCI interrupt for device 0000:01:0a.0 disabled
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19
saa7146: found saa7146 @ mem f8cd0000 (revision 1, irq 19) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:23:89:5b
dvb-ttpci: load_dram(): timeout at block 0
dvb-ttpci: av7110_bootarm(): load_dram() failed
ACPI: PCI interrupt for device 0000:01:0a.0 disabled
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19
saa7146: found saa7146 @ mem f8cd0000 (revision 1, irq 19) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:23:89:5b
dvb-ttpci: load_dram(): timeout at block 0
dvb-ttpci: av7110_bootarm(): load_dram() failed
ACPI: PCI interrupt for device 0000:01:0a.0 disabled
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19
saa7146: found saa7146 @ mem f8cd0000 (revision 1, irq 19) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:23:89:5b
dvb-ttpci: load_dram(): timeout at block 0
dvb-ttpci: av7110_bootarm(): load_dram() failed
ACPI: PCI interrupt for device 0000:01:0a.0 disabled
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Display More
lsmod
Code
Module Size Used by
b2c2_flexcop_pci 9368 0
b2c2_flexcop 27532 1 b2c2_flexcop_pci
budget_av 19072 0
dvb_pll 14084 2 b2c2_flexcop,budget_av
budget_ci 18964 0
ir_common 34052 1 budget_ci
budget 12164 0
budget_core 10884 3 budget_av,budget_ci,budget
dvb_ttpci 93796 0
ttpci_eeprom 2560 2 budget_core,dvb_ttpci
saa7146_vv 44544 2 budget_av,dvb_ttpci
saa7146 17800 6 budget_av,budget_ci,budget,budget_core,dvb_ttpci,saa7146_vv
mt312 7428 0
cx24110 7300 0
tda1004x 14084 0
firmware_class 9728 5 b2c2_flexcop,budget_av,budget_ci,dvb_ttpci,tda1004x
ves1820 6148 0
stv0299 9736 0
ves1x93 6276 0
i2c_core 20880 14 b2c2_flexcop,budget_av,dvb_pll,budget_ci,budget,budget_core,dvb_ttpci,ttpci_eeprom,mt312,cx24110,tda1004x,ves1820,stv0299,ves1x93
dvb_core 73000 7 b2c2_flexcop,budget_av,budget_ci,budget,budget_core,dvb_ttpci,stv0299
video_buf 23172 1 saa7146_vv
videodev 26368 1 saa7146_vv
v4l2_common 15488 2 saa7146_vv,videodev
v4l1_compat 12420 2 saa7146_vv,videodev
evdev 9344 0
forcedeth 41732 0
usb_storage 67008 0
ehci_hcd 27020 0
uhci_hcd 21772 0
ohci_hcd 18948 0
cdfs 26024 0
Display More
cat /proc/interupts
Code
CPU0
0: 1082378 IO-APIC-edge timer
1: 8 IO-APIC-edge i8042
6: 2 IO-APIC-edge floppy
8: 1 IO-APIC-edge rtc
9: 0 IO-APIC-fasteoi acpi
14: 3808 IO-APIC-edge ide0
15: 40 IO-APIC-edge ide1
16: 119450 IO-APIC-fasteoi ohci_hcd:usb1, eth0
17: 0 IO-APIC-fasteoi ohci_hcd:usb2
18: 0 IO-APIC-fasteoi ehci_hcd:usb3
NMI: 0
LOC: 1081407
ERR: 0
MIS: 0
Display More
Ich hoffe doch sehr das ihr mir helfen könnt.
Gruß
Max