Hallo,
nachdem selbst bistr-o-math nun nicht mehr weiter weiss, wollte ich mich mal auf bistr-o-math empfehlung an das ctvdr-board (tobi) wenden.
Problem ist die Meldung "nvram could not set timer".
Ich denke ich habe an alles gedacht, aber schaut doch bitte selbst:
die nvram-wakeup.conf (von bistr-o-math):
ZitatAlles anzeigen################################################
## Mainboard autodetection information:
##
## - Mainboard vendor: ""
## - Mainboard type: "K7VM4"
## - Mainboard revision: "1.00"
## - BIOS vendor: "American Megatrends Inc."
## - BIOS version: "P2.40"
## - BIOS release: "03/15/2004"
#wegen reboot-problem nr.1
need_reboot = ON_ANY_CHANGE
addr_stat = 0x57
shift_stat = 1
addr_day = 0x57
shift_day = 2
addr_hour = 0x58
addr_min = 0x59
addr_sec = 0x5A
rtc_day = 0x6F
reset_day = ON
rtc_time = ON
addr_chk_h = 0x30
addr_chk_l = 0x31
Die lilo.conf sieht so aus:
ZitatAlles anzeigen# /etc/lilo.conf - See: `lilo( ' and `lilo.conf(5)',
# /dev/hda1 is the root partition
# "/dev/hda" is the partition or disk for the boot record
lba32
compact
# bootable partition ( containing /boot )
boot="/dev/hda"
# Lilo boot menu
install=/boot/boot-bmp.b
bitmap = /boot/boot-logo.bmp
bmp-colors=6,0,0,15,6,0
bmp-table=210p,90p,1,15,17
bmp-timer=390p,170p,6,1,15
map=/boot/map
prompt
timeout = 100
delay = 20
vga=normal
image = /boot/vmlinuz
label = Linux
root = /dev/hda1
initrd = /boot/initrd.img
append = "apm=power-off noapic acpi=off"
read-only
image = /boot/memtest86.bin
label = Speichertest
# Lilo Änderungen für den reboot-poweroff
image = /boot/bzImage.2.4.20.poweroff
label = PowerOff
# append="apm=off"
# append="acpi=off"
lilo wurde danach gestartet und es steht auch poweroff im boot-start-menü.
Kann mir jemand hier helfen.
Habe vorsichtshalber schon geupdated und -graded und refreshed. nutze inzwischen auch die sources.list von tobi.
gruß,
champpain