Bekomme DVB-T nicht zum laufen.

Ich habe in meinem VDR eine FF Technotrend (DVB-S) drin und eine Budget DVB-T. Ein lspci ergibt bei mir folgendes:

0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 651 Host (rev 02)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
0000:00:0e.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
0000:00:0f.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
0000:00:10.0 CardBus bridge: ENE Technology Inc CB710 Cardbus Controller (rev 01)
0000:00:10.1 FLASH memory: ENE Technology Inc CB710 Memory Card Reader Controller
0000:00:13.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter

Ein lsmod sagt:

Module Size Used by
lirc_serial 12512 0
lirc_dev 12040 2 lirc_serial
snd_pcm_oss 57896 0
snd_mixer_oss 19200 1 snd_pcm_oss
snd_intel8x0 31396 0
snd_ac97_codec 69728 1 snd_intel8x0
snd_pcm 96776 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 24708 1 snd_pcm
snd 60164 6 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 9056 1 snd
snd_page_alloc 10248 2 snd_intel8x0,snd_pcm
edd 10012 0
ipv6 237312 14
ves1x93 8976 0
ves1820 9220 0
tda1004x 16516 0
stv0299 17160 0
sp887x 9092 0
nxt6000 9732 0
mt352 10884 0
mt312 10372 0
grundig_29504_491 7684 0
grundig_29504_401 9608 0
dst 14600 0
bt878 11064 1 dst
bttv 147276 1 bt878
i2c_algo_bit 9352 1 bttv
btcx_risc 4744 1 bttv
dib3000mb 13056 0
cx24110 10520 0
cx22702 11012 0
at76c651 7300 0
alps_tdmb7 7940 0
alps_tdlb7 9356 0
dvb_ttpci 77160 0
firmware_class 9600 5 tda1004x,sp887x,bttv,alps_tdlb7,dvb_ttpci
saa7146_vv 46080 1 dvb_ttpci
video_buf 20356 2 bttv,saa7146_vv
saa7146 17956 2 dvb_ttpci,saa7146_vv
v4l1_compat 12676 1 saa7146_vv
v4l2_common 6144 2 bttv,saa7146_vv
videodev 9344 2 bttv,saa7146_vv
ttpci_eeprom 2816 1 dvb_ttpci
i2c_core 23312 21 ves1x93,ves1820,tda1004x,stv0299,sp887x,nxt6000,mt352,mt312,grundig_29504_491,grundig_29504_401,dst,bttv,i2c_algo_bit,dib3000mb,cx24110,cx22702,at76c651,alps_tdmb7,alps_tdlb7,dvb_ttpci,ttpci_eeprom
dvb_core 77740 18 ves1x93,ves1820,tda1004x,stv0299,sp887x,nxt6000,mt352,mt312,grundig_29504_491,grundig_29504_401,dst,dib3000mb,cx24110,cx22702,at76c651,alps_tdmb7,alps_tdlb7,dvb_ttpci
evdev 8960 0
joydev 9664 0
sg 35872 0
st 37404 0
sd_mod 16912 0
sr_mod 16292 0
scsi_mod 111052 4 sg,st,sd_mod,sr_mod
ide_cd 38176 0
cdrom 36508 2 sr_mod,ide_cd
subfs 7552 1
ehci_hcd 29188 0
sis_agp 8068 1
agpgart 32168 1 sis_agp
ohci_hcd 20228 0
yenta_socket 19840 0
pcmcia_core 66100 1 yenta_socket
ohci1394 31748 0
ieee1394 106168 1 ohci1394
b44 19972 0
mii 4992 1 b44
dm_mod 54524 0
usbcore 106724 4 ehci_hcd,ohci_hcd
reiserfs 242000 2

Ich glaube also dass für die DVB-T die Module richtig geladen sind. Nun versuche ich aber verzweifelt mit einem Tool zu tunen und bekomme es absolut nicht hin. Ich habe die DVB-S schon wunderbar am laufen die ist also nicht das Problem. Natürlich habe ich auch immer daran gedacht den VDR mir samt Treiber zu entladen bevor ich zu tunen versuche. Ich habe die Firmware am richtigen Platz (das glaube ich zumindest). Diese Probleme sind bei mir mit dem Switch zum Kernel 2.6 aufgetaucht. Ich finde ehrlich gesagt auch kein gescheites Document wo beschrieben wird wie man eine DVB-T installiert (unter Kernel 2.6 versteht sich) .

Hat jemand eine Idee?

Gruss
Merlin

-----------------------------DMESG---------------------------
Linux version 2.6.8-24.10-default (geeko@buildhost) (gcc version 3.3.4 (pre 3.3.5 20040809)) #1 Wed Dec 22 11:54:27 UTC 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fbfc000 (usable)
BIOS-e820: 000000000fbfc000 - 000000000fbff000 (ACPI data)
BIOS-e820: 000000000fbff000 - 000000000fc00000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
761MB vmalloc/ioremap area available.
0MB HIGHMEM available.
251MB LOWMEM available.
On node 0 totalpages: 64508
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 60412 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f57c0
ACPI: RSDT (v001 ASUS P4S8L 0x42302e31 MSFT 0x31313031) @ 0x0fbfc000
ACPI: FADT (v001 ASUS P4S8L 0x42302e31 MSFT 0x31313031) @ 0x0fbfc0c0
ACPI: BOOT (v001 ASUS P4S8L 0x42302e31 MSFT 0x31313031) @ 0x0fbfc030
ACPI: MADT (v001 ASUS P4S8L 0x42302e31 MSFT 0x31313031) @ 0x0fbfc058
ACPI: DSDT (v001 ASUS P4S8L 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
ACPI: local apic disabled
Built 1 zonelists
Kernel command line: root=/dev/hda1 vga=0x314 selinux=0 resume=/dev/hda2 splash=silent desktop elevator=as
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 2400.710 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 250444k/258032k available (2076k kernel code, 6844k reserved, 780k data, 212k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4751.36 BogoMIPS (lpj=2375680)
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found!
ACPI: IRQ9 SCI: Level Trigger.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1111k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1070, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Enabling SiS 96x SMBus.
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 15
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 15 (level, low) -> IRQ 15
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
Simple Boot Flag at 0x3a set to 0x1
apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1125478629.577:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xe8000000, mapped to 0xd0880000, using 3750k, total 4096k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at cb37:000c
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...no good signature found.
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Using anticipatory io scheduler
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 11 (level, low) -> IRQ 11
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: ST360015A, ATA DISK drive
hdb: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PC Speaker
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
PM: Reading pmdisk image.
swsusp: Resume From Partition: /dev/hda2
<3>swsusp: Invalid partition type.
pmdisk: Error -22 resuming
PM: Resume from disk failed.
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
PCI0 PCI1 PS2K USB0 USB3 USB1 USB2 AC97
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 212k freed
Adding 265064k swap on /dev/hda2. Priority:42 extents:1
reiserfs: enabling write barrier flush mode
usbcore: registered new driver usbfs
usbcore: registered new driver hub
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
b44.c:v0.94 (May 4, 2004)
ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 12 (level, low) -> IRQ 12
eth0: Broadcom 4400 10/100BaseT Ethernet 00:0c:6e:6e:de:81
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[df000000-df0007ff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000013ecfa]
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:10.0 [1524:1411]
Yenta: ISA IRQ mask 0x0080, PCI irq 11
Socket status: 30000006
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 3 (level, low) -> IRQ 3
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: irq 3, pci mem d0d98000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.8-24.10-default ohci_hcd
usb usb1: SerialNumber: 0000:00:03.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:03.1: OHCI Host Controller
Linux agpgart interface v0.100 (c) Dave Jones
ohci_hcd 0000:00:03.1: irq 5, pci mem d0dae000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.8-24.10-default ohci_hcd
usb usb2: SerialNumber: 0000:00:03.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 6 (level, low) -> IRQ 6
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: irq 6, pci mem d0db0000
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.8-24.10-default ohci_hcd
usb usb3: SerialNumber: 0000:00:03.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
agpgart: Detected SiS 651 chipset
agpgart: Maximum main memory to use for agp memory: 199M
agpgart: AGP aperture is 64M @ 0xe0000000
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: irq 11, pci mem d0db2000
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.8-24.10-default ehci_hcd
usb usb4: SerialNumber: 0000:00:03.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
hdb: ATAPI 52X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.20
SCSI subsystem initialized
st: Version 20040403, fixed bufsize 32768, s/g segs 256
evdev_connect: evdev cfbeab80 handle cfbeab9c name event0
evdev_connect: evdev cfbeaa80 handle cfbeaa9c name event1
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
subfs 0.9
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Linux video capture interface: v1.00
saa7146: register extension 'dvb'.
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 12 (level, low) -> IRQ 12
saa7146: found saa7146 @ mem d0eee000 (revision 1, irq 12) (0x13c2,0x0000).
DVB: registering new adapter (Siemens/Technotrend/Hauppauge PCI rev1.3).
b44: eth0: Link is down.
adapter has MAC addr = 00:d0:5c:03:c9:7d
gpioirq unknown type=0 len=0
DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261c
DVB: AV7110(0) - firmware supports CI link layer interface
av7110(0): Crystal audio DAC detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
av7110: found av7110-0.
evdev_connect: evdev cdecee80 handle cdecee9c name event2
cx22702: Detected Hauppauge Nova-T DVB-T - PLL Thomson DTT759x
cx22702_validate_eeprom eeprom content is not valid
drivers/media/dvb/frontends/dib3000mb.c: did not found a DiBCom 3000-MB.
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bt878: AUDIO driver version 0.0.0 loaded
bt878 find by dvb adap: checking "Siemens/Technotrend/Hauppauge PCI rev1.3"
bt878 find by dvb adap: NOT found "Siemens/Technotrend/Hauppauge PCI rev1.3"
DVB: registering frontend 0 (Grundig 29504-491, (TDA8083 based))...
mt312_read: ret == -121
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c037f760(lo)
IPv6 over IPv4 tunneling driver
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 12 (level, low) -> IRQ 12
intel8x0_measure_ac97_clock: measured 49559 usecs
intel8x0: clocking to 48000
lirc_dev: IR Remote Control driver registered, at major 61
lirc_serial: auto-detected active low receiver
lirc_dev: lirc_register_plugin:sample_rate: 0
Disabled Privacy Extensions on device ce58d000(sit0)
eth0: no IPv6 routers present
----------------------------------------------------

und...

--------------------/var/log/messages/----------------------------
Aug 31 08:58:12 vdr syslogd 1.4.1: restart.
Aug 31 08:58:17 vdr ntpd[4084]: ntpd 4.2.0a@1.1190-r Sat Oct 2 01:41:25 UTC 2004 (1)
Aug 31 08:58:17 vdr kernel: klogd 1.4.1, log source = /proc/kmsg started.
Aug 31 08:58:17 vdr kernel: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Aug 31 08:58:17 vdr kernel: Linux video capture interface: v1.00
Aug 31 08:58:17 vdr kernel: saa7146: register extension 'dvb'.
Aug 31 08:58:17 vdr kernel: ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 12 (level, low) -> IRQ 12
Aug 31 08:58:17 vdr kernel: saa7146: found saa7146 @ mem d0eee000 (revision 1, irq 12) (0x13c2,0x0000).
Aug 31 08:58:17 vdr kernel: DVB: registering new adapter (Siemens/Technotrend/Hauppauge PCI rev1.3).
Aug 31 08:58:17 vdr kernel: b44: eth0: Link is down.
Aug 31 08:58:17 vdr kernel: adapter has MAC addr = 00:d0:5c:03:c9:7d
Aug 31 08:58:17 vdr kernel: gpioirq unknown type=0 len=0
Aug 31 08:58:17 vdr kernel: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261c
Aug 31 08:58:17 vdr kernel: DVB: AV7110(0) - firmware supports CI link layer interface
Aug 31 08:58:17 vdr kernel: av7110(0): Crystal audio DAC detected
Aug 31 08:58:17 vdr kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
Aug 31 08:58:17 vdr kernel: av7110: found av7110-0.
Aug 31 08:58:17 vdr kernel: evdev_connect: evdev cdecee80 handle cdecee9c name event2
Aug 31 08:58:17 vdr ntpd[4084]: precision = 2.000 usec
Aug 31 08:58:17 vdr kernel: cx22702: Detected Hauppauge Nova-T DVB-T - PLL Thomson DTT759x
Aug 31 08:58:17 vdr kernel: cx22702_validate_eeprom eeprom content is not valid
Aug 31 08:58:17 vdr kernel: drivers/media/dvb/frontends/dib3000mb.c: did not found a DiBCom 3000-MB.
Aug 31 08:58:17 vdr kernel: bttv: driver version 0.9.15 loaded
Aug 31 08:58:17 vdr kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Aug 31 08:58:17 vdr kernel: bt878: AUDIO driver version 0.0.0 loaded
Aug 31 08:58:17 vdr kernel: bt878 find by dvb adap: checking "Siemens/Technotrend/Hauppauge PCI rev1.3"
Aug 31 08:58:17 vdr kernel: bt878 find by dvb adap: NOT found "Siemens/Technotrend/Hauppauge PCI rev1.3"
Aug 31 08:58:17 vdr kernel: DVB: registering frontend 0 (Grundig 29504-491, (TDA8083 based))...
Aug 31 08:58:17 vdr kernel: mt312_read: ret == -121
Aug 31 08:58:17 vdr kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
Aug 31 08:58:17 vdr kernel: b44: eth0: Flow control is on for TX and on for RX.
Aug 31 08:58:18 vdr ntpd[4084]: Listening on interface wildcard, 0.0.0.0#123
Aug 31 08:58:18 vdr ntpd[4084]: Listening on interface wildcard, ::#123
Aug 31 08:58:18 vdr ntpd[4084]: Listening on interface lo, 127.0.0.1#123
Aug 31 08:58:18 vdr ntpd[4084]: Listening on interface eth0, 192.168.20.254#123
Aug 31 08:58:18 vdr kernel: NET: Registered protocol family 10
Aug 31 08:58:18 vdr kernel: Disabled Privacy Extensions on device c037f760(lo)
Aug 31 08:58:18 vdr kernel: IPv6 over IPv4 tunneling driver
Aug 31 08:58:18 vdr ntpd[4084]: frequency initialized 0.000 PPM from /var/lib/ntp/drift/ntp.drift
Aug 31 08:58:18 vdr kernel: ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 12 (level, low) -> IRQ 12
Aug 31 08:58:18 vdr kernel: intel8x0_measure_ac97_clock: measured 49559 usecs
Aug 31 08:58:18 vdr kernel: intel8x0: clocking to 48000
Aug 31 08:58:19 vdr sshd[4248]: Server listening on :: port 22.
Aug 31 08:58:23 vdr kernel: lirc_dev: IR Remote Control driver registered, at major 61
Aug 31 08:58:24 vdr kernel: lirc_serial: auto-detected active low receiver
Aug 31 08:58:24 vdr kernel: lirc_dev: lirc_register_plugin:sample_rate: 0
Aug 31 08:58:25 vdr kernel: Disabled Privacy Extensions on device ce58d000(sit0)
Aug 31 08:58:26 vdr /usr/sbin/cron[4406]: (CRON) STARTUP (V5.0)
Aug 31 08:58:27 vdr su: (to vdruser) root on /dev/console
Aug 31 08:58:27 vdr su: pam_unix2: session started for user vdruser, service su
Aug 31 08:58:28 vdr vdr[4424]: VDR version 1.3.23 started
Aug 31 08:58:28 vdr vdr[4424]: loading plugin: /home/vdruser/VDR/PLUGINS/lib/libvdr-streamdev-server.so.1.3.23
Aug 31 08:58:28 vdr vdr[4424]: loading plugin: /home/vdruser/VDR/PLUGINS/lib/libvdr-osdteletext.so.1.3.23
Aug 31 08:58:28 vdr vdr[4424]: loading plugin: /home/vdruser/VDR/PLUGINS/lib/libvdr-femon.so.1.3.23
Aug 31 08:58:28 vdr vdr[4424]: loading plugin: /home/vdruser/VDR/PLUGINS/lib/libvdr-text2skin.so.1.3.23
Aug 31 08:58:28 vdr kernel: eth0: no IPv6 routers present
Aug 31 08:58:28 vdr vdr[4424]: loading plugin: /home/vdruser/VDR/PLUGINS/lib/libvdr-image.so.1.3.23
Aug 31 08:58:28 vdr vdr[4424]: loading plugin: /home/vdruser/VDR/PLUGINS/lib/libvdr-mp3.so.1.3.23
Aug 31 08:58:29 vdr vdr[4424]: loading plugin: /home/vdruser/VDR/PLUGINS/lib/libvdr-mplayer.so.1.3.23
Aug 31 08:58:29 vdr vdr[4424]: loading /home/vdrconfig/setup.conf
Aug 31 08:58:29 vdr vdr[4424]: loading /home/vdrconfig/sources.conf
Aug 31 08:58:29 vdr vdr[4424]: loading /home/vdrconfig/diseqc.conf
Aug 31 08:58:29 vdr vdr[4424]: loading /home/vdrconfig/channels.conf
Aug 31 08:58:29 vdr vdr[4424]: loading /home/vdrconfig/svdrphosts.conf
Aug 31 08:58:29 vdr vdr[4424]: loading /home/vdrconfig/ca.conf
Aug 31 08:58:29 vdr vdr[4424]: loading /home/vdrconfig/remote.conf
Aug 31 08:58:29 vdr vdr[4424]: loading /home/vdrconfig/keymacros.conf
Aug 31 08:58:29 vdr vdr[4424]: reading EPG data from /video0/epg.data
Aug 31 08:58:29 vdr vdr[4424]: probing /dev/dvb/adapter0/frontend0
Aug 31 08:58:29 vdr vdr[4424]: probing /dev/dvb/adapter1/frontend0
Aug 31 08:58:29 vdr vdr[4424]: found 1 video device
Aug 31 08:58:29 vdr vdr[4424]: initializing plugin: streamdev-server (0.3.3-pre3-geni): VDR Streaming Server
Aug 31 08:58:29 vdr vdr[4424]: initializing plugin: osdteletext (0.4.2): Displays teletext on the OSD
Aug 31 08:58:29 vdr vdr[4424]: initializing plugin: femon (0.8.9): DVB Signal Information Monitor (OSD)
Aug 31 08:58:29 vdr vdr[4424]: initializing plugin: text2skin (1.0): Loader for text-based skins
Aug 31 08:58:29 vdr vdr[4424]: initializing plugin: image (0.2.3): Visor de Imagenes y Fotos
Aug 31 08:58:29 vdr vdr[4424]: initializing plugin: mp3 (0.9.12): A versatile audio player
Aug 31 08:58:29 vdr vdr[4424]: loading /home/vdrconfig/plugins/mp3sources.conf
Aug 31 08:58:29 vdr vdr[4424]: ERROR: source base /mnt/cdrom not found
Aug 31 08:58:29 vdr vdr[4424]: WARNING: source base /mnt/cdrom not found/permission denied
Aug 31 08:58:29 vdr vdr[4424]: loading id3 cache from /video0/id3info.cache
Aug 31 08:58:29 vdr vdr[4424]: initializing plugin: mplayer (0.9.12): Media replay via MPlayer
Aug 31 08:58:29 vdr vdr[4424]: loading /home/vdrconfig/plugins/mplayersources.conf
Aug 31 08:58:29 vdr vdr[4424]: ERROR: source base /mnt/cdrom not found
Aug 31 08:58:29 vdr vdr[4424]: WARNING: source base /mnt/cdrom not found/permission denied
Aug 31 08:58:29 vdr vdr[4424]: setting primary device to 1
Aug 31 08:58:29 vdr vdr[4424]: SVDRP listening on port 2001
Aug 31 08:58:30 vdr vdr[4445]: tuner on device 1 thread started (pid=4445, tid=16386)
Aug 31 08:58:30 vdr vdr[4446]: Section handler thread started (pid=4446, tid=32771)
Aug 31 08:58:30 vdr vdr[4424]: loading /home/vdrconfig/themes/classic-default.theme
Aug 31 08:58:30 vdr vdr[4424]: starting plugin: streamdev-server
Aug 31 08:58:30 vdr vdr[4424]: loading /home/vdrconfig/plugins/streamdevhosts.conf
Aug 31 08:58:30 vdr vdr[4424]: starting plugin: osdteletext
Aug 31 08:58:30 vdr vdr[4447]: streamdev server thread started (pid=4447, tid=49156)
Aug 31 08:58:30 vdr vdr[4447]: Streamdev: Listening (HTTP) on port 3000
Aug 31 08:58:30 vdr vdr[4424]: starting plugin: femon
Aug 31 08:58:30 vdr vdr[4424]: starting plugin: text2skin
Aug 31 08:58:30 vdr vdr[4424]: text2skin: loading /home/vdrconfig/plugins/text2skin/EgalsTry/EgalsTry.trans
Aug 31 08:58:30 vdr vdr[4424]: text2skin: loading /home/vdrconfig/plugins/text2skin/EgalsTry/EgalsTry.colors
Aug 31 08:58:30 vdr vdr[4424]: parsing /home/vdrconfig/plugins/text2skin/EgalsTry/EgalsTry.skin
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for 'L: {PresentDuration:%m}/+{PresentProgress:%m}/-{PresentRemaining:%m} Min.' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for 'L: {PresentDuration:%m} Min.' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for 'Low Diskspace' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for 'REC: {CurrentRecording}' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for 'REC:' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '{ChannelNumber} {ChannelName}' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '{ChannelNumber} {ChannelName}' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '[LR]' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '[L-]' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '[-R]' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '({PresentDuration:%m}/+{PresentProgress:%m}/-{PresentRemaining:%m}')' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '({PresentDuration:%m}')' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '({FollowingDuration:%m}')' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '{ChannelNumber} {ChannelName}' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '{ChannelNumber} {ChannelName}' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '[LR]' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '[L-]' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '[-R]' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '{ReplayPosition} / {ReplayDuration}' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for 'Channel:' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '[LR]' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '[L-]' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: text2skin_EgalsTry: no translation found for '[-R]' in language 10 (Español)
Aug 31 08:58:30 vdr vdr[4424]: starting plugin: image
Aug 31 08:58:30 vdr vdr[4424]: loading /home/vdrconfig/plugins/imagesources.conf
Aug 31 08:58:30 vdr vdr[4424]: imageplugin: WARNING: source base /cdrom not found/permission denied
Aug 31 08:58:30 vdr vdr[4424]: imageplugin: WARNING: source base /video not found/permission denied
Aug 31 08:58:30 vdr vdr[4424]: imageplugin: WARNING: source base /mnt/camera not found/permission denied
Aug 31 08:58:30 vdr vdr[4424]: starting plugin: mp3
Aug 31 08:58:30 vdr vdr[4424]: starting plugin: mplayer
Aug 31 08:58:30 vdr vdr[4424]: loading /home/vdrconfig/themes/EgalsTry-default.theme
Aug 31 08:58:30 vdr vdr[4448]: LIRC remote control thread started (pid=4448, tid=65541)
Aug 31 08:58:30 vdr vdr[4449]: KBD remote control thread started (pid=4449, tid=81926)
Aug 31 08:58:30 vdr vdr[4424]: remote control LIRC - keys known
Aug 31 08:58:30 vdr vdr[4424]: remote control KBD - keys known
Aug 31 08:58:30 vdr vdr[4424]: switching to channel 1
Aug 31 08:58:30 vdr vdr[4424]: creating directory /vtx/S19.2E-1-1101-28106
Aug 31 08:58:30 vdr ifup: No configuration found for sit0
Aug 31 08:58:30 vdr vdr[4490]: receiver on device 1 thread started (pid=4490, tid=114696)
Aug 31 08:58:30 vdr vdr[4491]: TS buffer on device 1 thread started (pid=4491, tid=131081)
---------------------------------------------------

Gruss
Merlin

Tja das ganze Ding an der Sache ist aber dass die Karte ziemlich alt ist, und ich dieses Frontend das erste mal bei der Installation des Kernels 2.6 gesehen habe. Vorher hatte ich die Treiber mit einem Script beim Systemstart geladen und da ging's ganz wunderbar.
Das die Karte kaputt ist bezweifle ich, da ich seit dem ich den Kernel 2.6 habe nichts mehr sehe... es kann natürlich auch ein dummer Zufall sein

Aus den ganzen Posts werde ich nicht schlau, denn meine Karte ist weder eine Avermedia ist, noch kann ich Finnisch (oder was das auch immer ist :D)

Die Karte ist wie gesagt NICHT neu, ich habe sie seiner Zeit bei USA-X gekauft und habe neulich gesehen dass diese Karte nicht mehr hergestellt wird.

Gruss
Merlin

Ich dachte man könnte es auch meiner Signature entnehmen...

Technotrend DVB-T Rev. 1.3 (Budget)

Gruss
Merlin

Ich habe mich mal beim VDRWiki schlau gemacht und ich habe den Eindruck, dass die Karte als Nova-T erkannt wird und deswegen die falsche Firmware für den Tuner geladen wird. Wo kann man das ändern? Ich weiss dass ich einen Phillips Tuner habe... deswegen kannte ich auch nicht das komische cx... Modul!

Gruss
Merlin

Wie kann ich meinem System das denn verklickern? Irgendwo muss ich das doch sicher ändern können. /etc/modules.conf oder /etc/modprobe vielleicht???

Gruss
Merlin

Also ich glaube jetzt nachdem ich die Schnauze voll hatte und zu meiner Schwiegermutter mitsamt VDR gefahren bin, dass es doch die Antenne ist. Das komische ist aber dass ich das normale Fernsehen (Analog) wunderbar empfange. Hier in meiner Gegend wird DVB-T auf Kanal 65 also 826 MHz gesendet. Wie kann ich den überprüfen ob der Empfang da ausreichend ist (mal abgesehen vom VDR)?

Gruss
Merlin

Nun ja, das ist ja alles gut und schön, aber wenn ich keinen scan bewerkstelligen kann, dann kann ich ja auch nicht mit femon nachgucken ob alles läuft, oder?

Gruss
Merlin