Hi There folks,
I need some vdr config help -
My setup:
1 X twin tuner Dvb-s2 pci-e receiver - Connected to two different satellites (with single lnb's).
My setup:
2 Satellite dishes
( 1 X Tevii S470 dual tuner)
13.0e ----------> lnb -----------------> 1st tuner of card
28.2e ----------> lnb -----------------> 2nd Tuner of the card
There is no configuration in vdr to specify that tuner 1 of the card receive only 13.0e
tuner 2 on the same card to recieve only 28.2e
I tried reading the posts put nothing seems straightforward:
Possible solution is to somehow map the different tuners on the same card to a DISEQC.conf setting but obviously there is no actual diseqc switch in my setup so not sure if this correct.
So if anyone could help me out I would be very grateful
Cheers.