vdr legt Rechner still

Duff11 · 16. Februar 2011

Hallo,

wenn ich vdr auf dem Rechner starte, dann ist es nur eine Frage der Zeit, bis sich der gesamte Rechner aufhängt.

Wie kann dies sein?
Liegt es eventuell an dem alten Treiber, den ich verwende?

Code

dmesg|grep -i ngene
[    8.001188] nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
[    8.002513] ngene 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[    8.002570] ngene: Found Linux4Media cineS2 DVB-S2 Twin Tuner (v5)
[    8.004542] ngene 0000:02:00.0: setting latency timer to 64
[    8.004630] ngene: Device version 1
[    8.004701] ngene 0000:02:00.0: firmware: requesting ngene_15.fw
[    8.137908] ngene: Loading firmware file ngene_15.fw.
[    8.150170] DVB: registering new adapter (nGene)
[    8.459525] DVB: registering new adapter (nGene)

Code

lsmod|grep ngene
ngene                  18940  0
dvb_core               75074  1 ngene
i2c_core               15712  6 stv6110x,lnbp21,stv090x,ngene,i2c_nforce2,nvidia

Im Logfile konnte ich folgenden Fehler finden:

Code

ERROR: driver buffer overflow on device 1

Und noch die Ausgabe von lspci -vv

Code

02:00.0 Multimedia video controller: Micronas Semiconductor Holding AG Device 0720 (rev 01)
        Subsystem: Micronas Semiconductor Holding AG Device dd00
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at faef0000 (32-bit, non-prefetchable) [size=64K]
        Region 1: Memory at faee0000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [58] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
        Capabilities: [400 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Kernel driver in use: ngene
        Kernel modules: ngene

Alles anzeigen

M.Temp · 16. Februar 2011

ich hatte zweimal ein ähnliches Problem:
- einmal auf meinem Hauptvdr
- einmal auf meinem Server

In beiden Fällen lags an der Hardware. Beim Server ist bei geladenem Treiber die Kisten ach ca 1-2 Tagen einfach stehen geblieben. Ein Tausch der 10€ DVB-T-Karte (gegen ein gleiches Modell) hat geholfen.

In beiden Fällen hab ich mir nen Wolf gesucht und irgendwann entnervt die Hardware getauscht. Bei ner billien DVB-T Karte ist das sicher leichter als bei einer DVB-S2....

Duff11 · 16. Februar 2011

Also die HW hat mich ca. 160 Euro gekostet. Die will ich nun mal ausschließen.

UFO · 16. Februar 2011

Zitat

Code

ERROR: driver buffer overflow on device 1

Das ist doch nicht alles, was im Log steht?

Abgesehen davon:
Ich rate jedem, den aktuellen Treiber mit Fw18 zu verwenden!

CU
Oliver

Duff11 · 16. Februar 2011

Werde dann wohl den neuen Treiber probieren.

Wie komme ich nochmal an den aktuellen Treiber bzw. wo kann ich diesen finden?

Duff11 · 16. Februar 2011

Denke, dass ich (hoffentlich) den richtigen und aktuellsten Treiber gefunden habe?

Code

hg clone http://linuxtv.org/hg/~endriss/v4l-dvb

Dazu wollte ich noch den aktuellsten NVIDIA-Treiber installieren (270.26) von ftp://download.nvidia.com/XFree86/Linux-x86_64/270.26/.

Duff11 · 17. Februar 2011

Mmh...

Also die Firmeware ngene_18.fw wurde nun geladen.

Code

dmesg|grep -i ngene
[    8.032150] nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
[    8.033915] ngene 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[    8.033985] ngene: Found Linux4Media cineS2 DVB-S2 Twin Tuner (v5)
[    8.039412] ngene 0000:02:00.0: setting latency timer to 64
[    8.039499] ngene: Device version 1
[    8.039563] ngene 0000:02:00.0: firmware: requesting ngene_18.fw
[    8.294277] ngene: Loading firmware file ngene_18.fw.
[    8.305222] ngene 0000:02:00.0: irq 30 for MSI/MSI-X
[    8.734720] DVB: registering new adapter (nGene)
[    8.777024] DVB: registering new adapter (nGene)

Alles anzeigen

Ein lsmod mit grep auf ngene:

Code

lsmod|grep -i ngene
ngene                  25828  0
dvb_core               75074  1 ngene
i2c_core               15712  6 stv6110x,lnbp21,stv090x,ngene,i2c_nforce2,nvidia




# modinfo ngene
filename:       /lib/modules/2.6.32-5-amd64/kernel/drivers/media/dvb/ngene/ngene.ko
license:        GPL
author:         Micronas, Ralph Metzler, Manfred Voelkel
description:    nGene
license:        GPL
author:         Ralph Metzler <rjkm@metzlerbros.de>
description:    cxd2099
alias:          pci:v000018C3d00000720sv00001461sd0000062Ebc*sc*i*
alias:          pci:v000018C3d00000720sv000018C3sd0000DD20bc*sc*i*
alias:          pci:v000018C3d00000720sv000018C3sd0000DD10bc*sc*i*
alias:          pci:v000018C3d00000720sv000018C3sd0000DD00bc*sc*i*
alias:          pci:v000018C3d00000720sv000018C3sd0000DB02bc*sc*i*
alias:          pci:v000018C3d00000720sv000018C3sd0000DB01bc*sc*i*
alias:          pci:v000018C3d00000720sv000018C3sd0000ABC4bc*sc*i*
alias:          pci:v000018C3d00000720sv000018C3sd0000ABC3bc*sc*i*
depends:        dvb-core,i2c-core
vermagic:       2.6.32-5-amd64 SMP mod_unload modversions
parm:           one_adapter:Use only one adapter. (int)
parm:           shutdown_workaround:Activate workaround for shutdown problem with some chipsets. (int)
parm:           debug:Print debugging information. (int)
parm:           adapter_nr:DVB adapter numbers (array of short)

Alles anzeigen

Allerdings wird das Bild beim Schauen nach ca. 5-10 Minuten pixelig bzw. hat hänger und nach weiteren 5 Minuten hängt dann der komplette Rechner. Dann kann ich mich noch nicht mal mehr per ssh auf den Rechner verbinden oder per STRG+ALT+F1-6 auf eine Konsole wechseln.

Jemand noch eine Idee, woran dies liegen könnte?
Werden weitere Informationen benötigt?

Noch ein paar Logfilesausgaben vom syslog von gestern.

Code

Feb 16 19:53:35 myserver vdr: [16676] Text2Skin: volume display update thread started (pid=13315, tid=16676)
Feb 16 19:53:35 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:53:36 myserver vdr: [16676] Text2Skin: volume display update thread ended (pid=13315, tid=16676)
Feb 16 19:53:36 myserver vdr: [13315] [input_osd] OSD_Close(1): non-existing OSD !
Feb 16 19:53:42 myserver vdr: [16727] Text2Skin: channelInfo display update thread started (pid=13315, tid=16727)
Feb 16 19:53:43 myserver vdr: [13315] switching to channel 2
Feb 16 19:53:43 myserver vdr: [13350] TS buffer on device 1 thread ended (pid=13315, tid=13350)
Feb 16 19:53:43 myserver vdr: [13349] buffer stats: 206424 (9%) used
Feb 16 19:53:43 myserver vdr: [13349] receiver on device 1 thread ended (pid=13315, tid=13349)
Feb 16 19:53:43 myserver vdr: [16728] receiver on device 1 thread started (pid=13315, tid=16728)
Feb 16 19:53:43 myserver vdr: [13337] [demux_vdr] PMT changed, resetting demuxer
Feb 16 19:53:43 myserver vdr: [16729] TS buffer on device 1 thread started (pid=13315, tid=16729)
Feb 16 19:53:43 myserver vdr: [16728] [xine..put] H.264: Found NAL SPS at offset 6/3279
Feb 16 19:53:43 myserver vdr: [16728] [xine..put] H.264 SPS: profile_idc 77
Feb 16 19:53:43 myserver vdr: [16728] [xine..put] H.264 SPS: pic_width:  80 mbs
Feb 16 19:53:43 myserver vdr: [16728] [xine..put] H.264 SPS: pic_height: 45 mbs
Feb 16 19:53:43 myserver vdr: [16728] [xine..put] H.264 SPS: frame only flag: 1
Feb 16 19:53:43 myserver vdr: [16728] [xine..put] H.264 SPS: aspect_ratio_idc 1
Feb 16 19:53:43 myserver vdr: [16728] [xine..put] H.264 SPS: -> aspect ratio 1 / 1
Feb 16 19:53:43 myserver vdr: [16728] [xine..put] H.264 SPS: -> video size 1280x720, aspect 1:1
Feb 16 19:53:43 myserver vdr: [16728] [xine..put] Detected video size 1280x720
Feb 16 19:53:44 myserver vdr: [13337] [demux_vdr] audio stream changed: 00000000 -> 03010000
Feb 16 19:53:48 myserver vdr: [16727] Text2Skin: channelInfo display update thread ended (pid=13315, tid=16727)
Feb 16 19:53:49 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:53:49 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:53:50 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:53:51 myserver vdr: [16755] Text2Skin: channelInfo display update thread started (pid=13315, tid=16755)
Feb 16 19:53:51 myserver vdr: [13315] switching to channel 3
Feb 16 19:53:51 myserver vdr: [16729] TS buffer on device 1 thread ended (pid=13315, tid=16729)
Feb 16 19:53:51 myserver vdr: [16728] buffer stats: 185368 (8%) used
Feb 16 19:53:51 myserver vdr: [16728] receiver on device 1 thread ended (pid=13315, tid=16728)
Feb 16 19:53:51 myserver vdr: [16756] receiver on device 1 thread started (pid=13315, tid=16756)
Feb 16 19:53:51 myserver vdr: [13337] [demux_vdr] PMT changed, resetting demuxer
Feb 16 19:53:51 myserver vdr: [16757] TS buffer on device 1 thread started (pid=13315, tid=16757)
Feb 16 19:53:52 myserver vdr: [13337] [demux_vdr] audio stream changed: 00000000 -> 03010000
Feb 16 19:53:52 myserver vdr: [16756] [xine..put] Detected video size 720x576
Feb 16 19:53:52 myserver vdr: [13320] changing pids of channel 3 from 163+163=2:104=deu@3;106=deu@106:0:105 to 163+163=2:104=deu@3;106=deu@106:110=deu:105
Feb 16 19:53:52 myserver vdr: [13315] retuning due to modification of channel 3
Feb 16 19:53:52 myserver vdr: [13315] switching to channel 3
Feb 16 19:53:52 myserver vdr: [13315] [input_vdr] vdr_flush_engine: playback is paused <0>
Feb 16 19:53:53 myserver vdr: [16757] TS buffer on device 1 thread ended (pid=13315, tid=16757)
Feb 16 19:53:53 myserver vdr: [16756] buffer stats: 92872 (4%) used
Feb 16 19:53:53 myserver vdr: [16756] receiver on device 1 thread ended (pid=13315, tid=16756)
Feb 16 19:53:53 myserver vdr: [16783] receiver on device 1 thread started (pid=13315, tid=16783)
Feb 16 19:53:53 myserver vdr: [16784] TS buffer on device 1 thread started (pid=13315, tid=16784)
Feb 16 19:53:53 myserver vdr: [13337] [demux_vdr] PMT changed, resetting demuxer
Feb 16 19:53:53 myserver vdr: [13337] [demux_vdr] audio stream changed: 00000000 -> 03010000
Feb 16 19:53:53 myserver vdr: [16783] [xine..put] Detected video size 720x576
Feb 16 19:53:55 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:53:56 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:53:56 myserver vdr: [16755] Text2Skin: channelInfo display update thread ended (pid=13315, tid=16755)
Feb 16 19:54:02 myserver vdr: [16819] Text2Skin: channelInfo display update thread started (pid=13315, tid=16819)
Feb 16 19:54:02 myserver vdr: [13315] switching to channel 2
Feb 16 19:54:02 myserver vdr: [16784] TS buffer on device 1 thread ended (pid=13315, tid=16784)
Feb 16 19:54:02 myserver vdr: [16783] buffer stats: 81404 (3%) used
Feb 16 19:54:02 myserver vdr: [16783] receiver on device 1 thread ended (pid=13315, tid=16783)
Feb 16 19:54:02 myserver vdr: [16836] receiver on device 1 thread started (pid=13315, tid=16836)
Feb 16 19:54:02 myserver vdr: [13337] [demux_vdr] PMT changed, resetting demuxer
Feb 16 19:54:02 myserver vdr: [16837] TS buffer on device 1 thread started (pid=13315, tid=16837)
Feb 16 19:54:02 myserver vdr: [13337] [demux_vdr] audio stream changed: 00000000 -> 03010000
Feb 16 19:54:03 myserver vdr: [16836] [xine..put] H.264: Found NAL SPS at offset 6/3279
Feb 16 19:54:03 myserver vdr: [16836] [xine..put] H.264 SPS: profile_idc 77
Feb 16 19:54:03 myserver vdr: [16836] [xine..put] H.264 SPS: pic_width:  80 mbs
Feb 16 19:54:03 myserver vdr: [16836] [xine..put] H.264 SPS: pic_height: 45 mbs
Feb 16 19:54:03 myserver vdr: [16836] [xine..put] H.264 SPS: frame only flag: 1
Feb 16 19:54:03 myserver vdr: [16836] [xine..put] H.264 SPS: aspect_ratio_idc 1
Feb 16 19:54:03 myserver vdr: [16836] [xine..put] H.264 SPS: -> aspect ratio 1 / 1
Feb 16 19:54:03 myserver vdr: [16836] [xine..put] H.264 SPS: -> video size 1280x720, aspect 1:1
Feb 16 19:54:03 myserver vdr: [16836] [xine..put] Detected video size 1280x720
Feb 16 19:54:07 myserver vdr: [16819] Text2Skin: channelInfo display update thread ended (pid=13315, tid=16819)
Feb 16 19:54:11 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:12 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:13 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:14 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:14 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:15 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:23 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:24 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:28 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:35 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:37 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:41 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:42 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:46 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:47 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:47 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:47 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:57 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:54:57 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:55:01 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:55:02 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:55:02 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:55:19 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:55:20 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:55:35 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:55:36 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:55:36 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:55:36 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:55:36 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:55:39 myserver vdr: [17322] Text2Skin: channelInfo display update thread started (pid=13315, tid=17322)
Feb 16 19:55:39 myserver vdr: [13315] switching to channel 1
Feb 16 19:55:39 myserver vdr: [16837] TS buffer on device 1 thread ended (pid=13315, tid=16837)
Feb 16 19:55:39 myserver vdr: [16836] buffer stats: 1168044 (55%) used
Feb 16 19:55:39 myserver vdr: [16836] receiver on device 1 thread ended (pid=13315, tid=16836)
Feb 16 19:55:39 myserver vdr: [17323] receiver on device 1 thread started (pid=13315, tid=17323)
Feb 16 19:55:39 myserver vdr: [13337] [demux_vdr] PMT changed, resetting demuxer
Feb 16 19:55:39 myserver vdr: [17324] TS buffer on device 1 thread started (pid=13315, tid=17324)
Feb 16 19:55:39 myserver vdr: [17323] [xine..put] H.264: Found NAL SPS at offset 6/151
Feb 16 19:55:39 myserver vdr: [17323] [xine..put] H.264 SPS: profile_idc 100
Feb 16 19:55:39 myserver vdr: [17323] [xine..put] H.264 SPS: pic_width:  80 mbs
Feb 16 19:55:39 myserver vdr: [17323] [xine..put] H.264 SPS: pic_height: 45 mbs
Feb 16 19:55:39 myserver vdr: [17323] [xine..put] H.264 SPS: frame only flag: 1
Feb 16 19:55:39 myserver vdr: [17323] [xine..put] H.264 SPS: aspect_ratio_idc 1
Feb 16 19:55:39 myserver vdr: [17323] [xine..put] H.264 SPS: -> aspect ratio 1 / 1
Feb 16 19:55:39 myserver vdr: [17323] [xine..put] H.264 SPS: -> video size 1280x720, aspect 1:1
Feb 16 19:55:39 myserver vdr: [17323] [xine..put] Detected video size 1280x720
Feb 16 19:55:40 myserver vdr: [13337] [demux_vdr] audio stream changed: 00000000 -> 03010000
Feb 16 19:55:44 myserver vdr: [17322] Text2Skin: channelInfo display update thread ended (pid=13315, tid=17322)
Feb 16 19:55:51 myserver vdr: [17375] Text2Skin: menu display update thread started (pid=13315, tid=17375)
Feb 16 19:56:11 myserver vdr: [17375] Text2Skin: menu display update thread ended (pid=13315, tid=17375)
Feb 16 19:56:15 myserver vdr: [17502] Text2Skin: channelInfo display update thread started (pid=13315, tid=17502)
Feb 16 19:56:16 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:56:19 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:56:19 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:56:20 myserver vdr: [17502] Text2Skin: channelInfo display update thread ended (pid=13315, tid=17502)
Feb 16 19:56:21 myserver vdr: [17528] Text2Skin: channelInfo display update thread started (pid=13315, tid=17528)
Feb 16 19:56:23 myserver vdr: [17528] Text2Skin: channelInfo display update thread ended (pid=13315, tid=17528)
Feb 16 19:56:24 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:56:24 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:56:24 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:56:24 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:56:32 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:56:44 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:57:02 myserver vdr: [17729] Text2Skin: volume display update thread started (pid=13315, tid=17729)
Feb 16 19:57:04 myserver vdr: [17729] Text2Skin: volume display update thread ended (pid=13315, tid=17729)
Feb 16 19:57:04 myserver vdr: [17755] Text2Skin: volume display update thread started (pid=13315, tid=17755)
Feb 16 19:57:06 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:57:06 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:57:11 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:57:13 myserver vdr: [17755] Text2Skin: volume display update thread ended (pid=13315, tid=17755)
Feb 16 19:57:32 myserver vdr: [17881] Text2Skin: channelInfo display update thread started (pid=13315, tid=17881)
Feb 16 19:57:32 myserver vdr: [13315] switching to channel 2
Feb 16 19:57:32 myserver vdr: [17324] TS buffer on device 1 thread ended (pid=13315, tid=17324)
Feb 16 19:57:32 myserver vdr: [17323] buffer stats: 208304 (9%) used
Feb 16 19:57:32 myserver vdr: [17323] receiver on device 1 thread ended (pid=13315, tid=17323)
Feb 16 19:57:32 myserver vdr: [17882] receiver on device 1 thread started (pid=13315, tid=17882)
Feb 16 19:57:32 myserver vdr: [13337] [demux_vdr] PMT changed, resetting demuxer
Feb 16 19:57:32 myserver vdr: [17883] TS buffer on device 1 thread started (pid=13315, tid=17883)
Feb 16 19:57:32 myserver vdr: [13337] [demux_vdr] audio stream changed: 00000000 -> 03010000
Feb 16 19:57:33 myserver vdr: [17882] [xine..put] H.264: Found NAL SPS at offset 6/3647
Feb 16 19:57:33 myserver vdr: [17882] [xine..put] H.264 SPS: profile_idc 77
Feb 16 19:57:33 myserver vdr: [17882] [xine..put] H.264 SPS: pic_width:  80 mbs
Feb 16 19:57:33 myserver vdr: [17882] [xine..put] H.264 SPS: pic_height: 45 mbs
Feb 16 19:57:33 myserver vdr: [17882] [xine..put] H.264 SPS: frame only flag: 1
Feb 16 19:57:33 myserver vdr: [17882] [xine..put] H.264 SPS: aspect_ratio_idc 1
Feb 16 19:57:33 myserver vdr: [17882] [xine..put] H.264 SPS: -> aspect ratio 1 / 1
Feb 16 19:57:33 myserver vdr: [17882] [xine..put] H.264 SPS: -> video size 1280x720, aspect 1:1
Feb 16 19:57:33 myserver vdr: [17882] [xine..put] Detected video size 1280x720
Feb 16 19:57:35 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:57:36 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:57:36 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:57:36 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:57:37 myserver vdr: [17881] Text2Skin: channelInfo display update thread ended (pid=13315, tid=17881)
Feb 16 19:57:39 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:57:39 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:58:01 myserver vdr: [18034] Text2Skin: channelInfo display update thread started (pid=13315, tid=18034)
Feb 16 19:58:01 myserver vdr: [13315] switching to channel 1
Feb 16 19:58:01 myserver vdr: [17883] TS buffer on device 1 thread ended (pid=13315, tid=17883)
Feb 16 19:58:01 myserver vdr: [17882] buffer stats: 207740 (9%) used
Feb 16 19:58:01 myserver vdr: [17882] receiver on device 1 thread ended (pid=13315, tid=17882)
Feb 16 19:58:01 myserver vdr: [18035] receiver on device 1 thread started (pid=13315, tid=18035)
Feb 16 19:58:01 myserver vdr: [13337] [demux_vdr] PMT changed, resetting demuxer
Feb 16 19:58:01 myserver vdr: [18036] TS buffer on device 1 thread started (pid=13315, tid=18036)
Feb 16 19:58:01 myserver vdr: [18035] [xine..put] H.264: Found NAL SPS at offset 6/151
Feb 16 19:58:01 myserver vdr: [18035] [xine..put] H.264 SPS: profile_idc 100
Feb 16 19:58:01 myserver vdr: [18035] [xine..put] H.264 SPS: pic_width:  80 mbs
Feb 16 19:58:01 myserver vdr: [18035] [xine..put] H.264 SPS: pic_height: 45 mbs
Feb 16 19:58:01 myserver vdr: [18035] [xine..put] H.264 SPS: frame only flag: 1
Feb 16 19:58:01 myserver vdr: [18035] [xine..put] H.264 SPS: aspect_ratio_idc 1
Feb 16 19:58:01 myserver vdr: [18035] [xine..put] H.264 SPS: -> aspect ratio 1 / 1
Feb 16 19:58:01 myserver vdr: [18035] [xine..put] H.264 SPS: -> video size 1280x720, aspect 1:1
Feb 16 19:58:01 myserver vdr: [18035] [xine..put] Detected video size 1280x720
Feb 16 19:58:01 myserver vdr: [13337] [demux_vdr] audio stream changed: 00000000 -> 03010000
Feb 16 19:58:06 myserver vdr: [18034] Text2Skin: channelInfo display update thread ended (pid=13315, tid=18034)
Feb 16 19:58:13 myserver vdr: [13315] connect from 127.0.0.1, port 34532 - accepted
Feb 16 19:58:19 myserver vdr: [13315] closing SVDRP connection
Feb 16 19:58:25 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:58:25 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:58:25 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:58:37 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:58:37 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:58:37 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:58:37 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:58:38 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:58:38 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:58:38 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:58:42 myserver vdr: [18036] buffer usage: 70% (tid=18035)
Feb 16 19:58:42 myserver vdr: [18036] buffer usage: 60% (tid=18035)
Feb 16 19:58:42 myserver vdr: [18036] buffer usage: 70% (tid=18035)
Feb 16 19:58:42 myserver vdr: [18036] buffer usage: 60% (tid=18035)
Feb 16 19:58:42 myserver vdr: [18036] buffer usage: 70% (tid=18035)
Feb 16 19:58:43 myserver vdr: [18036] buffer usage: 80% (tid=18035)
Feb 16 19:58:44 myserver vdr: [18036] buffer usage: 90% (tid=18035)
Feb 16 19:58:44 myserver vdr: [18036] buffer usage: 100% (tid=18035)
Feb 16 19:58:51 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:58:52 myserver vdr: [18035] ERROR: skipped 11 bytes to sync on TS packet on device 1
Feb 16 19:58:59 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:00 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:59:00 myserver vdr: [18035] ERROR: skipped 11 bytes to sync on TS packet on device 1
Feb 16 19:59:06 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:07 myserver vdr: [18035] ERROR: skipped 11 bytes to sync on TS packet on device 1
Feb 16 19:59:12 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:14 myserver vdr: [18035] ERROR: TS packet not accepted in Transfer Mode
Feb 16 19:59:14 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:15 myserver vdr: [18035] ERROR: skipped 11 bytes to sync on TS packet on device 1
Feb 16 19:59:20 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:22 myserver vdr: [18035] ERROR: TS packet not accepted in Transfer Mode
Feb 16 19:59:22 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:24 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:25 myserver vdr: [18035] ERROR: TS packet not accepted in Transfer Mode
Feb 16 19:59:25 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:26 myserver vdr: [18035] ERROR: skipped 11 bytes to sync on TS packet on device 1
Feb 16 19:59:31 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:33 myserver vdr: [18035] ERROR: TS packet not accepted in Transfer Mode
Feb 16 19:59:33 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:35 myserver vdr: [18035] ERROR: TS packet not accepted in Transfer Mode
Feb 16 19:59:35 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:36 myserver vdr: [18035] ERROR: TS packet not accepted in Transfer Mode
Feb 16 19:59:36 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:38 myserver vdr: [18035] ERROR: TS packet not accepted in Transfer Mode
Feb 16 19:59:38 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:38 myserver vdr: [18035] ERROR: skipped 11 bytes to sync on TS packet on device 1
Feb 16 19:59:43 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:45 myserver vdr: [18035] ERROR: TS packet not accepted in Transfer Mode
Feb 16 19:59:45 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:46 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:48 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:50 myserver vdr: [18035] ERROR: TS packet not accepted in Transfer Mode
Feb 16 19:59:50 myserver vdr: [18036] ERROR: driver buffer overflow on device 1
Feb 16 19:59:50 myserver vdr: [18587] Text2Skin: channelInfo display update thread started (pid=13315, tid=18587)
Feb 16 19:59:50 myserver vdr: [13315] switching to channel 2
Feb 16 19:59:51 myserver vdr: [18035] ERROR: TS packet not accepted in Transfer Mode
Feb 16 19:59:51 myserver vdr: [18036] TS buffer on device 1 thread ended (pid=13315, tid=18036)
Feb 16 19:59:51 myserver vdr: [18035] buffer stats: 2097151 (100%) used
Feb 16 19:59:51 myserver vdr: [18035] receiver on device 1 thread ended (pid=13315, tid=18035)
Feb 16 19:59:51 myserver vdr: [18588] receiver on device 1 thread started (pid=13315, tid=18588)
Feb 16 19:59:51 myserver vdr: [18589] TS buffer on device 1 thread started (pid=13315, tid=18589)
Feb 16 19:59:51 myserver vdr: [13337] [demux_vdr] PMT changed, resetting demuxer
Feb 16 19:59:51 myserver vdr: [13337] [demux_vdr] audio stream changed: 00000000 -> 03010000
Feb 16 19:59:52 myserver vdr: [18588] [xine..put] H.264: Found NAL SPS at offset 6/3647
Feb 16 19:59:52 myserver vdr: [18588] [xine..put] H.264 SPS: profile_idc 77
Feb 16 19:59:52 myserver vdr: [18588] [xine..put] H.264 SPS: pic_width:  80 mbs
Feb 16 19:59:52 myserver vdr: [18588] [xine..put] H.264 SPS: pic_height: 45 mbs
Feb 16 19:59:52 myserver vdr: [18588] [xine..put] H.264 SPS: frame only flag: 1
Feb 16 19:59:52 myserver vdr: [18588] [xine..put] H.264 SPS: aspect_ratio_idc 1
Feb 16 19:59:52 myserver vdr: [18588] [xine..put] H.264 SPS: -> aspect ratio 1 / 1
Feb 16 19:59:52 myserver vdr: [18588] [xine..put] H.264 SPS: -> video size 1280x720, aspect 1:1
Feb 16 19:59:52 myserver vdr: [18588] [xine..put] Detected video size 1280x720
Feb 16 19:59:55 myserver vdr: [18587] Text2Skin: channelInfo display update thread ended (pid=13315, tid=18587)
Feb 16 19:59:57 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0
Feb 16 19:59:57 myserver vdr: [13337] [demux_vdr] ts2es: no payload, size 0

Alles anzeigen

Duff11 · 18. Februar 2011

Niemand eine Idee oder ähnliches Problem?

Meine installierten vdr-Pakete:

Code

dpkg -l|awk '/^ii/ && /vdr/'
ii  dvdrtools                                   0.3.1-6                        DVD writing program
ii  libdvdread-dev                              4.1.3-10                       library for reading DVDs (development)
ii  libdvdread4                                 4.1.3-10                       library for reading DVDs
ii  libxine1-vdr                                1.1.19-2.etobi3                VDR-related plugins for libxine2
ii  libxine1-xvdr                               1.0.6+cvs20110213.0131-1       Xine input plugin for vdr-plugin-xineliboutput streams
ii  make-special-vdr                            1.9                            Make special vdr packages
ii  ttf-vdrsymbols                              2008.09.05-1                   The VDRSymbols TrueType font
ii  vdr                                         1.7.16-2~ctvdr1                Video Disk Recorder for DVB cards
ii  vdr-addon-acpiwakeup                        0.0.11                         Addon that enables vdr to wakeup itself using ACPI
ii  vdr-addon-vdrconvert                        0.1.1-17                       VDR addon to convert recordings to different formats
ii  vdr-channellogos                            0.0.3-3                        Channel logos for the text2skin plugin
ii  vdr-dev                                     1.7.16-2~ctvdr1                Video Disk Recorder for DVB cards
ii  vdr-enigmang-icons                          20070702-2                     Channel logos and other icons for the skinenigmang plugin
ii  vdr-genindex                                0.1.3-1                        Tool to generate a VDR index file
ii  vdr-plugin-burn                             0.1.0~pre22-ff1-3              Plugin for vdr that implements dvd conversion and writing
ii  vdr-plugin-dvd                              0.3.6~b03+cvs20090426.0013-3   DVD playback plugin for VDR
ii  vdr-plugin-dvdswitch                        0.1.3-22                       VDR plugin to create, burn, mount and manage DVD iso images
ii  vdr-plugin-epgsearch                        0.9.25~beta17-1                VDR plugin that provides extensive EPG searching capabilities
ii  vdr-plugin-externalplayer                   0.1.0-12                       Plugin to VDR that allows usage of external players
ii  vdr-plugin-femon                            1.7.8-1                        DVB frontend status monitor plugin for VDR
ii  vdr-plugin-lcdproc                          0.0.10-jw8-1                   Plugin to vdr that connects to lcdproc
ii  vdr-plugin-live                             0.2.0-9                        Web administration plugin for VDR
ii  vdr-plugin-menuorg                          0.4.4-3                        A VDR plug-in to reorganize the OSD main menu
ii  vdr-plugin-mp3                              0.10.2-3                       MP3 playback plugin for VDR
ii  vdr-plugin-mplayer                          0.10.2-3                       MPlayer playback plugin for VDR
ii  vdr-plugin-noepgmenu                        0.0.6~beta4-4                  VDR-Plugin to switch on and off the EPG for a channel
ii  vdr-plugin-skinenigmang                     0.1.1-1                        Skin plugin for VDR
ii  vdr-plugin-skinsoppalusikka                 1.7.1-2                        Skin plugin for vdr
ii  vdr-plugin-streamdev-client                 0.5.0-1                        VDR Plugin to stream Live-TV to other VDR's - client part
ii  vdr-plugin-streamdev-server                 0.5.0-1                        VDR Plugin to stream Live-TV to other VDR's - server part
ii  vdr-plugin-sysinfo                          0.1.0a-16                      Plugin for vdr to display hardware monitoring data
ii  vdr-plugin-text2skin                        1.3.1-1                        Plugin to vdr that loads and views skins
ii  vdr-plugin-tvonscreen                       1.0.141-20                     Plugin for vdr, that displays EPG data like in a typical TV guide
ii  vdr-plugin-weatherng                        0.0.6+0.0.7pre2-32             VDR plugin to download and display weather maps and forecasts
ii  vdr-plugin-xine                             0.9.3-1.etobi3                 allows xine to be a display for vdr, the Video Disk Recorder
ii  vdr-plugin-xineliboutput                    1.0.6+cvs20110213.0131-1       VDR plugin for Xine based sofdevice frontends
ii  vdr-skin-pearlhd                            0.0.9.git20101009-1            VDR OSD skin especially for HDTV systems
ii  vdr-skins                                   0.8                            Skins for VDR's text2skin plugin
ii  vdr-skins-speciallogos                      0.2                            Special channel logos for text2skin skins
ii  vdr-xpmlogos                                0.0.1-3                        Channel logos in xpm format
ii  vdradmin-am                                 3.6.7-2                        Web-based administration tool for vdr
ii  vdrsync                                     0.1.2.2dev2+050322-1           Perl Script for processing VDR recordings
ii  xineliboutput-sxfe                          1.0.6+cvs20110213.0131-1       Remote X-Server frontend for vdr-plugin-xineliboutput

Alles anzeigen

Meine Quellen:

Code

awk '/^[^#]/' /etc/apt/sources.list


deb http://ftp.de.debian.org/debian/ squeeze main contrib non-free
deb-src http://ftp.de.debian.org/debian/ squeeze main contrib non-free


deb http://security.debian.org/ squeeze/updates main contrib non-free
deb-src http://security.debian.org/ squeeze/updates main contrib non-free


deb http://www.debian-multimedia.org squeeze main


deb http://e-tobi.net/vdr-experimental squeeze base addons vdr-multipatch
deb-src http://e-tobi.net/vdr-experimental squeeze backports base addons vdr-multipatch

Alles anzeigen

Und meine Präferenzen:

Code

cat /etc/apt/preferences
Package: *
Pin: release o=Debian,a=stable
Pin-Priority: 600


Package: *
Pin: release o=e-tobi.net
Pin-Priority: 1001

gda · 18. Februar 2011

Mach mal:

Code

DISPLAY=:0 nvidia-settings -q GPUCoreTemp

Du musst eventuell die DISPLAY-Variable an dein System anpassen.

Gerald

Duff11 · 18. Februar 2011

Verstehe ich noch nicht ganz. Habe versucht das Display als normaler Benutzer zu setzen. Aber sollte dies nicht beim Start von vdr (/etc/init.d/vdr oder service vdr start) passieren?

Bin aktuell wohl über ssh auf dem Rechner eingeloggt!

Code

daniel@vdr:~$ echo $DISPLAY
localhost:10.0
daniel@vdr:~$ DISPLAY=:0 nvidia-settings -q GPUCoreTemp


  Attribute 'GPUCoreTemp' (marge:0.0): 78.
    'GPUCoreTemp' is an integer attribute.
    'GPUCoreTemp' is a read-only attribute.
    'GPUCoreTemp' can use the following target types: X Screen, GPU.


daniel@vdr:~$ echo $DISPLAY
localhost:10.0

Alles anzeigen

vdr legt Rechner still

Jetzt mitmachen!

Teilen

Benutzer online in diesem Thema