So, neue Version des Pear-Treibers ist fertig.
Super, vielen Dank.
gda
Reicht es für yavdr 4.0pre1 aus das Paket graphlcd-base (main) mit dem neuen GIt neu zu erstellen? Oder muss auch das Plugin aktualisiert werden?
Gruß
Murry
So, neue Version des Pear-Treibers ist fertig.
Super, vielen Dank.
gda
Reicht es für yavdr 4.0pre1 aus das Paket graphlcd-base (main) mit dem neuen GIt neu zu erstellen? Oder muss auch das Plugin aktualisiert werden?
Gruß
Murry
Alles anzeigen
Quellcode
find *.xpm -exec convert -resize 320 {} {}.png \;
(oder so ähnlich, kann ich gerade nicht nochmal testen, windows und so )
Mit convert konnte ich mich noch nie anfreunden. Die liqiud-logos (png) hat bei mir mogrify umgewandelt.
mogrify -resize 320x240! *.png
Gruß
Norbert
doch, muss man aber patchen, habe diese Anleitung benutzt:
http://geekparadise.de/2011/04/digitaler…y-fur-dockstar/
Der Kommentar von lars enthält eine neue Version (0.12devel) für das Pearl Display!
Mit lcd4linux zeigt meins nun die Senderlogos an =) dafür ist die Größe auch recht gut.
Hallo x-jojo,
hast du sie logos aus /usr/share/vdr-channellogos in eine andere Auflösung umgewandelt?
Gruß
Murry
Hallo!
Welche Firmware (DPF-hack) verwendet Ihr? Den aktuellen Trunk oder eine ältere Version?
http://dpf-ax.svn.sourceforge.net/viewvc/dpf-ax/trunk/
Gruß
Murry
Hallo!
Nach dem beenden von xbmc läuft der vdr leider mit den von xbmc verwendeten 60Hz oder 24Hz anstatt der eingestellten 50Hz. Ohne xbmc ist die Bildwiederholfrequenz in Ordnung (50Hz).
Fehlt beim vdr start nach der xbmc Verwendung die Einstellung der Bildwiederholfrequenz? In welchen script geschieht dies?
Gruß
Murry
Hallo!
Wenn ich das WFE meine yavdr auf meinen Tablet aufrufe dann kann ich die Scrollbalken nicht sehen (Dolphin) oder nicht bedienen (Opera 11).
Gibt es ein WFE für Telefone/Tablets?
Gruss
Murry
Hallo!
Ich habe X10 Fernbedienung von Pollin die zwei unterschiedliche IR codes für jede Taste sendet. Meine alte lirc.conf sah so aus:
begin remote
name X10
bits 40
eps 30
aeps 100
one 0 0
zero 0 0
gap 227969
min_repeat 0
toggle_bit 0
begin codes
Power 0x14d7020000
Guide 0x1406310000
Guide 0x1486b10000
Text 0x14eb160000
Text 0x146b960000
Live_Tv 0x14f11c0000
Live_Tv 0x14719c0000
Rec_Tv 0x146d980000
Rec_Tv 0x14ed180000
Photo 0x145a850000
Photo 0x14da050000
Music 0x145b860000
Music 0x14db060000
Dvd 0x1459840000
Dvd 0x14d9040000
Video 0x1482ad0000
Video 0x14022d0000
Audio 0x1487b20000
Audio 0x1407320000
Angle 0x1409340000
Angle 0x1489b40000
Title 0x140a350000
Title 0x148ab50000
Subtitle 0x1488b30000
Subtitle 0x1408330000
Vol_Up 0x145e890000
Vol_Up 0x14de090000
Vol_Down 0x145d880000
Vol_Down 0x14dd080000
Mute 0x1455800000
Mute 0x14d5000000
Prog_Up 0x14608b0000
Prog_Up 0x14e00b0000
Prog_Down 0x14618c0000
Prog_Down 0x14e10c0000
Up 0x146f9a0000
Up 0x14ef1a0000
Down 0x14f7220000
Down 0x1477a20000
OK 0x14f31e0000
OK 0x14739e0000
Left 0x14729d0000
Left 0x14f21d0000
Right 0x14749f0000
Right 0x14f41f0000
Back 0x1475a00000
Back 0x14f5200000
Info 0x1484af0000
Info 0x14042f0000
World 0x14709b0000
World 0x14f01b0000
Rewind 0x14f9240000
Rewind 0x1479a40000
Play 0x14fa250000
Play 0x147aa50000
Forward 0x14fb260000
Forward 0x147ba60000
Pause 0x14fe290000
Pause 0x147ea90000
Prev 0x14f6210000
Prev 0x1476a10000
Next 0x14f8230000
Next 0x1478a30000
Stop 0x147da80000
Stop 0x14fd280000
Rec 0x147ca70000
Rec 0x14fc270000
1 0x14E20D0000
1 0x14628D0000
2 0x14E30E0000
2 0x14638E0000
3 0x14E40F0000
3 0x14648F0000
4 0x14E5100000
4 0x1465900000
5 0x14E6110000
5 0x1466910000
6 0x14E7120000
6 0x1467920000
7 0x14E8130000
7 0x1468930000
8 0x14E9140000
8 0x1469940000
9 0x14EA150000
9 0x146A950000
0 0x14EC170000
0 0x146C970000
* 0x148cb70000
* 0x140c370000
D# 0x148db80000
D# 0x140d380000
end codes
end remote
Alles anzeigen
Unter eventlircd funktioniert nur jeder zweite Tastendruck. lsusb und evtest zeigt foldendes:
lsusb
Bus 002 Device 002: ID 0bc7:0006 X10 Wireless Technology, Inc. Wireless Transceiver (ACPI-compliant)
sudo evtest /dev/input/event2
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0xbc7 product 0x6 version 0x100
Input device name: "X10 WTI RF receiver"
Supported events:
Event type 0 (Sync)
Event type 1 (Key)
Event code 2 (1)
Event code 3 (2)
Event code 4 (3)
Event code 5 (4)
Event code 6 (5)
Event code 7 (6)
Event code 8 (7)
Event code 9 (8)
Event code 10 (9)
Event code 11 (0)
Event code 18 (E)
Event code 23 (I)
Event code 24 (O)
Event code 30 (A)
Event code 32 (D)
Event code 33 (F)
Event code 34 (G)
Event code 35 (H)
Event code 36 (J)
Event code 37 (K)
Event code 38 (L)
Event code 46 (C)
Event code 48 (B)
Event code 49 (N)
Event code 50 (M)
Event code 96 (KPEnter)
Event code 102 (Home)
Event code 103 (Up)
Event code 105 (Left)
Event code 106 (Right)
Event code 107 (End)
Event code 108 (Down)
Event code 113 (Mute)
Event code 114 (VolumeDown)
Event code 115 (VolumeUp)
Event code 116 (Power)
Event code 119 (Pause)
Event code 128 (Stop)
Event code 132 (Front)
Event code 139 (Menu)
Event code 150 (WWW)
Event code 152 (Coffee)
Event code 156 (Bookmarks)
Event code 159 (Forward)
Event code 167 (Record)
Event code 168 (Rewind)
Event code 176 (Edit)
Event code 200 (PlayCD)
Event code 201 (PauseCD)
Event code 202 (Prog3)
Event code 203 (Prog4)
Event code 207 (Play)
Event code 272 (LeftBtn)
Event code 273 (RightBtn)
Event code 275 (SideBtn)
Event code 276 (ExtraBtn)
Event code 352 (Ok)
Event code 353 (Select)
Event code 358 (Info)
Event code 377 (TV)
Event code 389 (DVD)
Event code 402 (ChannelUp)
Event code 403 (ChannelDown)
Event code 407 (Next)
Event code 412 (Previous)
Event type 2 (Relative)
Event code 0 (X)
Event code 1 (Y)
Testing ... (interrupt to exit)
Alles anzeigen
Wie kann ich eventlircd für meine Fernbedienung anpassen?
Als Frontend verwende ich vdr-sxfe, mit dem xine-plugin habe ich das Problem nicht.
Bei mir das gleiche. War aber auch schon bei der 0.3 so. Der Entwickler geht leider zur Zeit mehr in Richtung Blue Ray Unterstützung.
Gruß
Murry
Hallo cKone,
ich habe das gleiche Problem. Mein Script zum Shutdown nach der Aufnahme wird nicht ausgeführt.
Gruß
Murry
Hallo!
In der Standard Einstellung bekomme ich kein AC3 auf dem SPDIF. An meinem Reciever wird nur PCM 48kHz angezeigt. Mit den Template von yavdr 0.3 geht es einwandfrei.
Meine Hardware: Asrock ION 330 BD, Onkyo 506, Samsung 40A656
Hallo!
Kann der Skin Logos anzeigen? Format? Verzeichnis?
Gruß
Murry
also wer das testing-vdr repo unbedingt einsetzen will, muss wissen was er tut, von mir bitte keine hilfe erwarten.
Hast du Interesse an Fehlerberichten?
Gruß
Murry
Hallo Maniac,
hier mal das Syslog:
Jun 1 19:43:43 HTPC vdr: [1559] [xine..put] cXinelibOsd::CanHandleAreas(): Device does not support ARGB
Jun 1 19:43:51 HTPC vdr: [1559] [extrecmenu] starting replay of recording
Jun 1 19:43:51 HTPC vdr: [1559] loading /srv/vdr/video.00/Last_Man_Standing/2010-12-05.04.02.8-0.rec//marks
Jun 1 19:43:51 HTPC vdr: [1559] replay /srv/vdr/video.00/Last_Man_Standing/2010-12-05.04.02.8-0.rec
Jun 1 19:43:51 HTPC vdr: [1559] playing '/srv/vdr/video.00/Last_Man_Standing/2010-12-05.04.02.8-0.rec/00001.ts'
Jun 1 19:43:51 HTPC vdr: [1559] loading /srv/vdr/video.00/Last_Man_Standing/2010-12-05.04.02.8-0.rec//marks
Jun 1 19:43:51 HTPC vdr: [1559] [xine..put] OSD bandwidth: 220050 bytes/s (1719 kbit/s)
Jun 1 19:43:51 HTPC vdr: [1933] dvbplayer thread started (pid=1559, tid=1933)
Jun 1 19:43:51 HTPC vdr: [1934] non blocking file reader thread started (pid=1559, tid=1934)
Jun 1 19:43:51 HTPC vdr: [1933] [xine..put] Detected video size 720x576
Jun 1 19:43:56 HTPC vdr: [1559] [xine..put] cXinelibOsd::CanHandleAreas(): Device does not support ARGB
Jun 1 19:43:59 HTPC vdr: [1559] [xine..put] cXinelibOsd::CanHandleAreas(): Device does not support ARGB
Jun 1 19:43:59 HTPC lircd-0.8.6[1537]: removed client
Jun 1 19:43:59 HTPC vdr-sxfe[1689]: [1717] [input_vdr] Control stream disconnected
Jun 1 19:43:59 HTPC init: vdr main process (1559) killed by ABRT signal
Jun 1 19:43:59 HTPC svdrpd: SIGTERM (SignalException) -- /usr/sbin/svdrpd:83:in `select' -- /usr/sbin/svdrpd:83:in `run_once' -- /usr/sbin/svdrpd:92:in `run' -- /usr/sbin/svdrpd:209:in `run' -- /usr/sbin/svdrpd:498
Jun 1 19:44:01 HTPC init: vdr-frontend main process (1570) terminated with status 255
Jun 1 19:44:04 HTPC init: svdrpd main process (1576) killed by KILL signal
Jun 1 19:44:04 HTPC vdr-crash: vdr exit with signal ABRT . Restarting
Alles anzeigen
Device does not support ARGB --> Ist xineliboutput nicht geeignet?
Gruß
Murry
Hallo!
Ich probiere gerade das Testing Repro. Läuft auch schon recht gut. Aber beim neuen Pearlhd (native) Skin habe ich das Problem, das es immer bei der Wiedergabe einer Aufnahme abstürzt (Anzeige des Fortschrittsblakens). In den Logs habe ich keine brauchbare Fehlermeldung gefunden. Ist das Problem bekannt?
Gruß
Murry
Es gibt wieder etwas neues :
270.41.19 prerelease for Linux x86/x86_64 released
Fixed a bug in the VDPAU presentation queue that could cause 1 second hangs when transitioning from blit-based display to overlay- based display. This would most commonly happen when disabling a compositing manager.
Fixed a bug that could cause crashes when capturing SDI video.
Fixed a corner-case in which the OpenGL driver could leak resources in applications utilizing fork().
Addressed a Linux kernel interface compatibility problem that could lead to ioremap() errors and, potentially, functional and/or stability problems.
Fixed a bug that caused SLI initialization to fail on some Intel based systems.
Fixed a bug that caused SLI initialization to fail when using recent Linux kernels, such as 2.6.38
und
275.09 beta for Linux x86/x86_64 released
Added support for hardware button based pairing to NVIDIA 3D Vision Pro. Single click button on the hub to enter into a pairing mode which pairs one pair of glasses at a time. Double click the same button on the hub to enter into a pairing mode which pairs multiple pairs of glasses at a time.
Added unofficial GLX protocol support (i.e., for GLX indirect rendering) for the following OpenGL extensions:
GL_NV_framebuffer_multisample_coverage
GL_NV_texture_barrier
Added GLX protocol support (i.e., for GLX indirect rendering) for the following OpenGL extension:
GL_NV_register_combiners2
Fixed a bug that caused the pop-out and external DVI displays to go blank on Lenovo ThinkPad W701 laptops.
Fixed a bug that caused corruption on the menus in OpenOffice.org when the screen is rotated.)
Improved performance of certain memory allocations.
Fixed a bug that caused Java2D widgets to disappear when Java is configured to render using FBOs.
Fixed a bug that caused nvidia-settings to crash while saving the X configuration file on some Linux distributions.
Added a new X configuration option "BaseMosaic" which can be used to extend a single X screen transparently across all of the available display outputs on each GPU. See "Appendix B. X Config Options" in the README for more information.
gibt seit heute project-x-0.91.0 !!
http://sourceforge.net/projects/project-x/
könnte das paket bitte einer von euch testen ?
bevor ich die nach stable-vdr verschiebe ?
Einmal hat es funktioniert und einmal hatte folgenden Fehler: