Hallo,
Speziell seit vdr .15 habe ich wieder massenweise diese Meldungen im syslog.
Irgendetwas gefällt vdr nicht an meiner channels.conf, nur schreibt er die Änderungen nicht zurück, sodas diese Problem bei jedem Start wieder von vorne anfängt.
Das Problem ist, dass kurz das Bild weggeht.
Mir ist nur nicht ganz klar, was ich an der channels.conf notfalls manuell ändern muss.
Jun 11 06:27:43 linuxserver vdr: [6712] changing pids of channel 1 from 101+101=2:102=deu@4,103=2ch@4;106=deu@106:0:104 to 101+101=2:102=deu@3,103=2ch@3;106=deu@106:0:104
Jun 11 06:27:43 linuxserver vdr: [6705] retuning due to modification of channel 1
Jun 11 06:27:43 linuxserver vdr: [6705] switching to channel 1
Jun 11 06:27:43 linuxserver vdr: [6712] changing pids of channel 3 from 201+201=2:202=deu@4,203=2ch@4;206=dd@106:0:204 to 201+201=2:202=deu@3,203=2ch@3;206=dd@106:0:204
Jun 11 06:27:44 linuxserver vdr: [6712] changing pids of channel 19 from 301+301=2:302=deu@4,303=2ch@4:0:304 to 301+301=2:302=deu@3,303=2ch@3:0:304
Jun 11 06:27:44 linuxserver vdr: [6712] changing pids of channel 596 from 201+201=2:202=deu@4,203=2ch@4;206=dd@106:0:204 to 201+201=2:202=deu@3,203=2ch@3;206=dd@106:0:204
Jun 11 06:27:44 linuxserver vdr: [6712] changing pids of channel 24 from 601+601=2:602=deu@4,603=2ch@4:0:604 to 601+601=2:602=deu@3,603=2ch@3:0:604
Jun 11 06:27:44 linuxserver vdr: [6712] changing pids of channel 618 from 701+701=2:702=deu@4:0:704 to 701+701=2:702=deu@3:0:704
Jun 11 06:27:45 linuxserver vdr: [6712] changing pids of channel 23 from 801+801=2:802=deu@4,803=2ch@4:0:804 to 801+801=2:802=deu@3,803=2ch@3:0:804
Jun 11 06:27:49 linuxserver vdr: [6705] max. latency time 1 seconds
Viele Grüße
Peter