Hallo Leute,
ich verwende yaVDR auf einem POV/ION330.
Nach einiger Zeit habe ich laufend ATA errors und / wird read only gemountet.
Habe natürlich als erstes an einen Hardware Defekt gedacht und die HDD und das SATA Kabel getauscht, nach einem Test mit easyVDR musste ich leider festellen das dieses Problem irgendwie nur unter yaVDR auftritt.
Kernel läuft folgender:
Linux vdr01 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:56 UTC 2010 i686 GNU/Linux
Hat jemand einen Tip an was das liegen könnte?
Code
[ 6793.883073] ata1: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0xe frozen
[ 6793.883084] ata1: irq_stat 0x00400000, PHY RDY changed
[ 6793.883094] ata1: SError: { PHYRdyChg 10B8B Dispar LinkSeq TrStaTrns }
[ 6793.883106] ata1: hard resetting link
[ 6794.604547] ata1: SATA link down (SStatus 0 SControl 300)
[ 6794.818098] ata1: hard resetting link
[ 6798.449765] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6798.455278] ata1.00: configured for UDMA/133
[ 6798.455303] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[ 6798.455311] ata1: irq_stat 0x00000040, connection status changed
[ 6798.461904] ata1.00: configured for UDMA/133
[ 6798.461918] ata1: EH complete
[ 6929.738411] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x1810000 action 0xe frozen
[ 6929.738422] ata1.00: irq_stat 0x00400000, PHY RDY changed
[ 6929.738431] ata1: SError: { PHYRdyChg LinkSeq TrStaTrns }
[ 6929.738446] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 6929.738449] res 50/00:00:ae:05:4e/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 6929.738456] ata1.00: status: { DRDY }
[ 6929.738467] ata1: hard resetting link
[ 6930.460055] ata1: SATA link down (SStatus 0 SControl 300)
[ 6930.673192] ata1: hard resetting link
[ 6934.348042] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6934.353509] ata1.00: configured for UDMA/133
[ 6934.353533] ata1: limiting SATA link speed to 1.5 Gbps
[ 6934.353543] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[ 6934.353550] ata1: irq_stat 0x00000040, connection status changed
[ 6934.353563] ata1: hard resetting link
[ 6935.240120] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 6935.245814] ata1.00: configured for UDMA/133
[ 6935.245838] end_request: I/O error, dev sda, sector 0
[ 6935.245871] ata1: EH complete
[ 6965.976059] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 6965.976118] ata1.00: cmd ca/00:08:b7:c0:70/00:00:00:00:00/e0 tag 0 dma 4096 out
[ 6965.976121] res 40/00:00:ae:05:4e/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 6965.976129] ata1.00: status: { DRDY }
[ 6965.976141] ata1: hard resetting link
[ 6966.460038] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 6966.466065] ata1.00: configured for UDMA/133
[ 6966.466096] ata1: EH complete