Hi Folks,
Ich habe 2 TeVii S650 per USB (ohne Hub) an den VDR angeschlossen, jetzt hab ich das Problem, das immer mal eine von beiden Offline geht, und nicht mehr hoch kommt.
Ich weis, das zu diesem Thema schon diverse Threats existieren, leider konnte ich keine (funktionierende) Lösung finden.
laden klappt:
Code
DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb3/3-1/input/input5
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TeVii S650 USB2.0 successfully initialized and connected.
dvb-usb: found a 'TeVii S650 USB2.0' in cold state, will try to load a firmware
firmware: requesting dvb-usb-dw2104.fw
dvb-usb: downloading firmware from file 'dvb-usb-dw2104.fw'
dw2102: start downloading DW210X firmware
dvb-usb: found a 'TeVii S650 USB2.0' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TeVii S650 USB2.0)
dvb-usb: MAC address: ffff88012b8aefd8
dw2102: Attached cx24116!
Alles anzeigen
irgendwann dann:
Code
usb 3-1: USB disconnect, address 2
cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
firmware: requesting dvb-fe-cx24116.fw
cx24116_firmware_ondemand: Waiting for firmware upload(2)...
cx24116_cmd_execute() Firmware not responding
cx24116_firmware_ondemand: Writing firmware to device failed
cx24116_firmware_ondemand: Firmware upload failed
cx24116_cmd_execute(): Unable initialise the firmware
dvb-usb: could not submit URB no. 0 - get them all back
dvb-usb: could not submit URB no. 0 - get them all back
in den vdr-logs:
Ich habe versucht das Autosuspend abzuschalten ( soll ja zumindest bei der S660 helfen, also hab ich in die /etc/modprobe.conf eingetragen:
Wenn ich jetzt nach nem Systemneustart nachsehe, wie die Parameter gesetzt sind scheint alles zu passen:
An den Verbindungskabeln kanns nicht liegen.
Hat jemand noch nen Tip für mich übrig?