der Pundit will einfach nicht aus dem Tiefschlaf erwachen:
syslog
ZitatAlles anzeigenApr 13 06:49:21 pundit-vdr vdr-shutdown: executing /usr/share/vdr/shutdown-hooks/S90.nvram-wakeup as shell script
Apr 13 06:49:21 pundit-vdr vdr-nvram-wakeup: /usr/sbin/nvram-wakeup -ls 1208063960 --directisa
Apr 13 06:49:21 pundit-vdr nvram-wakeup[3463]: Your mainboard is currently not supported.
Apr 13 06:49:21 pundit-vdr nvram-wakeup[3463]: Please try determining the addresses and sending the following
Apr 13 06:49:21 pundit-vdr nvram-wakeup[3463]: information back to the maintainers:
Apr 13 06:49:21 pundit-vdr nvram-wakeup[3463]: - The addresses you found out (read README.mb)
Apr 13 06:49:21 pundit-vdr nvram-wakeup[3463]: - Mainboard vendor: ASUSTeK Computer INC.
Apr 13 06:49:21 pundit-vdr nvram-wakeup[3463]: - Mainboard type: P4R8L
Apr 13 06:49:21 pundit-vdr nvram-wakeup[3463]: - Mainboard revision: 1.xx
Apr 13 06:49:21 pundit-vdr nvram-wakeup[3463]: - BIOS vendor: American Megatrends Inc.
Apr 13 06:49:21 pundit-vdr nvram-wakeup[3463]: - BIOS version: 1006.004
Apr 13 06:49:21 pundit-vdr nvram-wakeup[3463]: - BIOS release: 06/29/2005
Apr 13 06:49:21 pundit-vdr vdr-nvram-wakeup: nvram-wakeup: could not set time, shutdown will be aborted
Apr 13 06:49:21 pundit-vdr vdr-shutdown: Shutdown aborted by /usr/share/vdr/shutdown-hooks/S90.nvram-wakeup with exitcode 1
Apr 13 06:49:24 pundit-vdr vdr: [2648] connect from 127.0.0.1, port 51758 - accepted
Apr 13 06:49:24 pundit-vdr vdr: [2648] SVDRP message: 'nvram-wakeup could not set time'
Apr 13 06:49:24 pundit-vdr vdr: [2648] info: nvram-wakeup could not set time
konsole
(jedoch startet er nicht entsprechend)
ZitatAlles anzeigennvram-wakeup -C /etc/nvram-wakeup.conf --directisa -s $((`date +%s` + 135 * 60))
All values are displayed as they are stored in the nvram/rtc.
(and do not correspond necessarily to the system date/time)
WakeUp : Enabled (0x20)
Day : 13 (0x0D)
Hour : 07 (0x07)
Minute : 23 (0x97)
Second : 17 (0x11)
Checksum: 0x1AFF
Enabling (0x20) WakeUp-on-RTC in nvram.
New Day : 13 (0x0D)
New Hour : 07 (0x07)
New Minute : 23 (0x97)
New Second : 34 (0x22)
New Checksum: 0x1B10
Now really WRITING into /dev/nvram...
The changes to take effect, you must reboot your computer now.
/etc/nvram-wakeup.conf
(ohne Eintrag ist das board "unknown")
ZitatAlles anzeigen# nvram-wakeup.conf
#
# Pundit
need_reboot = ON_ANY_CHANGE # All changes take effect
# after a reboot
addr_chk_h = 0x30 # These are adresses of
addr_chk_l = 0x31 # the checksum bytes
addr_stat = 0x88 # Status byte
shift_stat = 5 # The position of the
# status bit in the byte
addr_day = 0x89 # Day and time
addr_hour = 0x8A
addr_min = 0x8B
addr_sec = 0x8C
upper_method = VT82Cxxx
/etc/vdr/vdr-nvram-wakeup.conf
ZitatENABLED="yes"
COMMANDLINE="--directisa"
SPECIALSHUTDOWN="grub-set-default 4 ; reboot"
FORCE_REBOOT="yes"
REGULAR_DAYS=0 # 0=disabled, 1=each day, 2=each 2'nd day, 3=...
REGULAR_TIME=01:00 # HH:MM
/boot/grub/menu.lst
ZitatAlles anzeigendefault saved
timeout 1
title Debian GNU/Linux, kernel 2.6.18-6-486
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-6-486 root=/dev/hdc1 ro
initrd /boot/initrd.img-2.6.18-6-486
savedefault
title Debian GNU/Linux, kernel 2.6.18-6-486 (single-user mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-6-486 root=/dev/hdc1 ro single
initrd /boot/initrd.img-2.6.18-6-486
savedefault
title Debian GNU/Linux, kernel 2.6.18-5-486
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-5-486 root=/dev/hdc1 ro
initrd /boot/initrd.img-2.6.18-5-486
savedefault
title Debian GNU/Linux, kernel 2.6.18-5-486 (single-user mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-5-486 root=/dev/hdc1 ro single
initrd /boot/initrd.img-2.6.18-5-486
savedefault
title PowerOff
root (hd0,0)
savedefault 0
halt
kann vielleicht jemand seine configs hier posten? thx!
c't vdr 6.1, vdr 1.6.0, bios 1006.004 (aktuellste) mit entsprechenden Einstellungen