Nexus-S 2.1: Mahlzeit 3.2 nogo - Linvdr 0.5 go - warum?

Hi Leute,

ich hab hier ein komisches Phänomen mit einer Nexus-S 2.1:
Unter LinVDR 0.5 läuft Sie ohne Probleme
Unter Mahlzeit-ISO 3.2 krieg ich nur ein
"Something went wrong. VDR respawning...",
und im Log:

Mar 10 15:11:13 linvdr user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
Mar 10 15:11:13 linvdr user.warn kernel: saa7146: unregister extension 'budget_av'.
Mar 10 15:11:14 linvdr user.warn kernel: saa7146: unregister extension 'budget_ci dvb'.
Mar 10 15:11:14 linvdr user.warn kernel: saa7146: unregister extension 'budget dvb'.
Mar 10 15:11:14 linvdr user.warn kernel: saa7146: unregister extension 'dvb'.
Mar 10 15:11:19 linvdr user.info kernel: Linux video capture interface: v2.00
Mar 10 15:11:19 linvdr user.warn kernel: saa7146: register extension 'dvb'.
Mar 10 15:11:19 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
Mar 10 15:11:20 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
Mar 10 15:11:20 linvdr user.warn kernel: saa7146: register extension 'budget_av'.
Mar 10 15:11:20 linvdr user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Mar 10 15:11:21 linvdr user.info kernel: lirc_serial: auto-detected active high receiver
Mar 10 15:11:21 linvdr user.warn kernel: lirc_dev: lirc_register_plugin: sample_rate: 0
Mar 10 15:11:21 linvdr user.info vdr: [3026] VDR version 1.4.4-2-Toxic-Ed. started
Mar 10 15:11:21 linvdr user.info vdr: [3026] Bigpatch 17.09.2006 is active!
Mar 10 15:11:21 linvdr user.info vdr: [3026] loading /etc/vdr/setup.conf
Mar 10 15:11:21 linvdr user.err vdr: [3026] ERROR: unknown config parameter: RecordDolbyDigital = 1
Mar 10 15:11:21 linvdr user.err vdr: [3026] ERROR: unknown config parameter: ShowProgressBar = 0
Mar 10 15:11:21 linvdr user.err vdr: [3026] ERROR: unknown config parameter: SortTimers = 1
Mar 10 15:11:21 linvdr user.info vdr: [3026] loading /etc/vdr/sources.conf
Mar 10 15:11:21 linvdr user.info vdr: [3026] loading /etc/vdr/diseqc.conf
Mar 10 15:11:21 linvdr user.info vdr: [3026] loading /etc/vdr/channels.conf
Mar 10 15:11:21 linvdr user.info vdr: [3026] loading /etc/vdr/commands.conf
Mar 10 15:11:21 linvdr user.info vdr: [3026] loading /etc/vdr/reccmds.conf
Mar 10 15:11:21 linvdr user.info vdr: [3026] loading /etc/vdr/svdrphosts.conf
Mar 10 15:11:21 linvdr user.info vdr: [3026] loading /etc/vdr/remote.conf
Mar 10 15:11:21 linvdr user.info vdr: [3026] loading /etc/vdr/keymacros.conf
Mar 10 15:11:21 linvdr user.debug vdr: [3026] reading EPG data from /video0/epg.data
Mar 10 15:11:21 linvdr user.debug vdr: [3026] probing /dev/dvb/adapter0/frontend0
Mar 10 15:11:21 linvdr user.info vdr: [3026] no DVB device found
Mar 10 15:11:21 linvdr user.err vdr: [3026] ERROR: invalid primary device number: 1
Mar 10 15:11:21 linvdr user.err vdr: [3026] ERROR: no primary device found - using first device!
Mar 10 15:11:21 linvdr user.err vdr: [3026] ERROR: invalid primary device number: 1
Mar 10 15:11:21 linvdr user.debug vdr: [3026] max. latency time 0 seconds
Mar 10 15:11:21 linvdr user.info vdr: [3026] exiting

Warum nur?

Hab noch ein lspci:

00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:04.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:04.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:04.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:04.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:06.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
00:0b.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
00:12.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 03)

Gruss Richard

Hi ULF,

sischer doch...:

00:12.0 Class 0480: 1131:7146 (rev 01)
Subsystem: 00a1:a1a0
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at f4101400 (32-bit, non-prefetchable) [size=512]

Und noch ein lsmod hinterher:

Module Size Used by
lirc_serial 12640 0
dvb_ttpci 93796 0
ttpci_eeprom 2560 1 dvb_ttpci
saa7146_vv 44544 1 dvb_ttpci
saa7146 17800 2 dvb_ttpci,saa7146_vv
mt312 7428 0
cx24110 7300 0
tda1004x 14084 0
firmware_class 9728 2 dvb_ttpci,tda1004x
ves1820 6148 0
stv0299 9736 0
ves1x93 6276 0
i2c_core 20880 8 dvb_ttpci,ttpci_eeprom,mt312,cx24110,tda1004x,ves1820,stv0299,ves1x93
dvb_core 73000 2 dvb_ttpci,stv0299
video_buf 23172 1 saa7146_vv
videodev 26368 1 saa7146_vv
v4l2_common 15488 2 saa7146_vv,videodev
v4l1_compat 12420 2 saa7146_vv,videodev
evdev 9344 0
lirc_dev 13796 1 lirc_serial
3c59x 40232 0
mii 5376 1 3c59x
ehci_hcd 27020 0
uhci_hcd 21772 0
ohci_hcd 18948 0
cdfs 26024 0

Die Budget und b2c2 Treiber hab ich in der /etc/init.d/runvdr mal auskommentiert.

Gruss Richard

Hi Ulf,

[x] done

Man sollte Dir die goldene Nexus umhängen.

Gruss und Danke

Richard