[Gelöst] Streamdev-Server blockiert alle Karten, wenn ein client verbindet

Hallo zusammen,

habe in meinem Server 3 DVB-Karten. Sobald ich mit nur einem Client verbinde über streamdev-server (z.B. mit xmms, mplayer, was auch immer), sind alle Karten blockiert und ich kann nur noch die Kanäle auf dem Transponder des ersten verbundenen Clients benutzen. Streamdev-server ist auf immer pausieren eingestellt.

Stell ich das um auf Pausieren anbieten, krieg ich auch auf dem ersten Client bereits die Meldung "Kanal nicht verfügbar".

Am Server selbst läuft das softdevice, an den Karten ist extern nichts angeschlossen, PrimaryDVB=2 (also softdevice für die ausgabe verwenden).

Eigentlich müsste doch am Server selbst ein Bild da sein und extra noch wenigstens 2 Clients bedient werden können, wenn keine Aufzeichnungen laufen?!

Hat jemand eine Idee?

Gruß, Flipsen

Hallo Schmirl,

das dachte ich eigentlich auch (schon mit nur 2 Karten), kurioserweise geht das aber!

Aber ne andre Sache macht mich eben etwas stutzig:

im Syslog steht:
Sep 4 09:39:41 localhost vdr: [15749] probing /dev/dvb/adapter0/frontend0
Sep 4 09:39:43 localhost vdr: [15754] tuner on device 1 thread started (pid=15754, tid=15754)
Sep 4 09:39:43 localhost vdr: [15755] section handler thread started (pid=15755, tid=15755)
Sep 4 09:39:43 localhost vdr: [15749] probing /dev/dvb/adapter1/frontend0
Sep 4 09:39:43 localhost vdr: [15749] found 1 video device

Ist das nicht bissel wenig? Sollten da nicht insgesamt 3 Karten gefunden werden? Habe doch einmal Nexus und 2x Nova drin

Lt. dmesg wurden beim Booten aber alle Karten gefunden:

cx88[0]: card=1 -> Hauppauge WinTV 34xxx models
cx88[0]: card=2 -> GDI Black Gold
cx88[0]: card=3 -> PixelView
cx88[0]: card=4 -> ATI TV Wonder Pro
cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert
cx88[0]: card=6 -> AverTV Studio 303 (M126)
cx88[0]: card=7 -> MSI TV-@nywhere Master
cx88[0]: card=8 -> Leadtek Winfast DV2000
cx88[0]: card=9 -> Leadtek PVR 2000
cx88[0]: card=10 -> IODATA GV-VCP3/PCI
cx88[0]: card=11 -> Prolink PlayTV PVR
cx88[0]: card=12 -> ASUS PVR-416
cx88[0]: card=13 -> MSI TV-@nywhere
cx88[0]: card=14 -> KWorld/VStream XPert DVB-T
cx88[0]: card=15 -> DViCO FusionHDTV DVB-T1
cx88[0]: card=16 -> KWorld LTV883RF
cx88[0]: card=17 -> DViCO FusionHDTV 3 Gold-Q
cx88[0]: card=18 -> Hauppauge Nova-T DVB-T
cx88[0]: card=19 -> Conexant DVB-T reference design
cx88[0]: card=20 -> Provideo PV259
cx88[0]: card=21 -> DViCO FusionHDTV DVB-T Plus
cx88[0]: card=22 -> pcHDTV HD3000 HDTV
cx88[0]: card=23 -> digitalnow DNTV Live! DVB-T
cx88[0]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
cx88[0]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
cx88[0]: card=26 -> IODATA GV/BCTV7E
cx88[0]: card=27 -> PixelView PlayTV Ultra Pro (Stereo)
cx88[0]: card=28 -> DViCO FusionHDTV 3 Gold-T
cx88[0]: card=29 -> ADS Tech Instant TV DVB-T PCI
cx88[0]: card=30 -> TerraTec Cinergy 1400 DVB-T
cx88[0]: card=31 -> DViCO FusionHDTV 5 Gold
cx88[0]: card=32 -> AverMedia UltraTV Media Center PCI 550
cx88[0]: card=33 -> Kworld V-Stream Xpert DVD
cx88[0]: card=34 -> ATI HDTV Wonder
cx88[0]: card=35 -> WinFast DTV1000-T
cx88[0]: card=36 -> AVerTV 303 (M126)
CORE cx88[0]: subsystem: 0070:9202, board: UNKNOWN/GENERIC [card=0,autodetected]
TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[0]/0: found at 0000:01:06.0, rev: 5, irq: 3, latency: 32, mmio: 0xf4000000
cx88[0]/0: registered device video1 [v4l2]
cx88[0]/0: registered device vbi0
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11
cx88[1]: Your board isn't known (yet) to the driver. You can
cx88[1]: try to pick one of the existing card configs via
cx88[1]: card=<n> insmod option. Updating to the latest
cx88[1]: version might help as well.
cx88[1]: Here is a list of valid choices for the card=<n> insmod option:
cx88[1]: card=0 -> UNKNOWN/GENERIC
cx88[1]: card=1 -> Hauppauge WinTV 34xxx models
cx88[1]: card=2 -> GDI Black Gold
cx88[1]: card=3 -> PixelView
cx88[1]: card=4 -> ATI TV Wonder Pro
cx88[1]: card=5 -> Leadtek Winfast 2000XP Expert
cx88[1]: card=6 -> AverTV Studio 303 (M126)
cx88[1]: card=7 -> MSI TV-@nywhere Master
cx88[1]: card=8 -> Leadtek Winfast DV2000
cx88[1]: card=9 -> Leadtek PVR 2000
cx88[1]: card=10 -> IODATA GV-VCP3/PCI
cx88[1]: card=11 -> Prolink PlayTV PVR
cx88[1]: card=12 -> ASUS PVR-416
cx88[1]: card=13 -> MSI TV-@nywhere
cx88[1]: card=14 -> KWorld/VStream XPert DVB-T
cx88[1]: card=15 -> DViCO FusionHDTV DVB-T1
cx88[1]: card=16 -> KWorld LTV883RF
cx88[1]: card=17 -> DViCO FusionHDTV 3 Gold-Q
cx88[1]: card=18 -> Hauppauge Nova-T DVB-T
cx88[1]: card=19 -> Conexant DVB-T reference design
cx88[1]: card=20 -> Provideo PV259
cx88[1]: card=21 -> DViCO FusionHDTV DVB-T Plus
cx88[1]: card=22 -> pcHDTV HD3000 HDTV
cx88[1]: card=23 -> digitalnow DNTV Live! DVB-T
cx88[1]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
cx88[1]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
cx88[1]: card=26 -> IODATA GV/BCTV7E
cx88[1]: card=27 -> PixelView PlayTV Ultra Pro (Stereo)
cx88[1]: card=28 -> DViCO FusionHDTV 3 Gold-T
cx88[1]: card=29 -> ADS Tech Instant TV DVB-T PCI
cx88[1]: card=30 -> TerraTec Cinergy 1400 DVB-T
cx88[1]: card=31 -> DViCO FusionHDTV 5 Gold
cx88[1]: card=32 -> AverMedia UltraTV Media Center PCI 550
cx88[1]: card=33 -> Kworld V-Stream Xpert DVD
cx88[1]: card=34 -> ATI HDTV Wonder
cx88[1]: card=35 -> WinFast DTV1000-T
cx88[1]: card=36 -> AVerTV 303 (M126)
CORE cx88[1]: subsystem: 0070:9202, board: UNKNOWN/GENERIC [card=0,autodetected]
TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[1]/0: found at 0000:01:07.0, rev: 5, irq: 11, latency: 32, mmio: 0xf8000000
cx88[1]/0: registered device video2 [v4l2]
cx88[1]/0: registered device vbi1
cx2388x blackbird driver version 0.0.5 loaded
cx2388x dvb driver version 0.0.5 loaded
input: PC Speaker as /class/input/input3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
lirc_dev: IR Remote Control driver registered, at major 61
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 (1400 mV)
powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 (1350 mV)
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa (1300 mV)
powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc (1250 mV)
powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
cpu_init done, current fid 0x10, vid 0x4
powernow-k8: ph2 null fid transition 0x10
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
NET: Registered protocol family 17
saa7146: unregister extension 'dvb'.
ACPI: PCI interrupt for device 0000:01:08.0 disabled
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
saa7146: found saa7146 @ mem f88e6000 (revision 1, irq 5) (0x13c2,0x000e).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3).
adapter has MAC addr = 00:d0:5c:24:0e:74
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input4
dvb-ttpci: found av7110-0.
saa7146: unregister extension 'dvb'.
ACPI: PCI interrupt for device 0000:01:08.0 disabled
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
saa7146: found saa7146 @ mem f88e6000 (revision 1, irq 5) (0x13c2,0x000e).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3).
adapter has MAC addr = 00:d0:5c:24:0e:74
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input5
dvb-ttpci: found av7110-0.
saa7146: unregister extension 'dvb'.
ACPI: PCI interrupt for device 0000:01:08.0 disabled
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
saa7146: found saa7146 @ mem f88e6000 (revision 1, irq 5) (0x13c2,0x000e).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3).
adapter has MAC addr = 00:d0:5c:24:0e:74
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input6
dvb-ttpci: found av7110-0.
saa7146: unregister extension 'dvb'.
ACPI: PCI interrupt for device 0000:01:08.0 disabled
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
saa7146: found saa7146 @ mem f88e6000 (revision 1, irq 5) (0x13c2,0x000e).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3).
adapter has MAC addr = 00:d0:5c:24:0e:74
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input7
dvb-ttpci: found av7110-0.
saa7146: unregister extension 'dvb'.
ACPI: PCI interrupt for device 0000:01:08.0 disabled
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
saa7146: found saa7146 @ mem f88e6000 (revision 1, irq 5) (0x13c2,0x000e).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3).
adapter has MAC addr = 00:d0:5c:24:0e:74
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input8
dvb-ttpci: found av7110-0.
saa7146: unregister extension 'dvb'.
ACPI: PCI interrupt for device 0000:01:08.0 disabled
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
saa7146: found saa7146 @ mem f88e6000 (revision 1, irq 5) (0x13c2,0x000e).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3).
adapter has MAC addr = 00:d0:5c:24:0e:74
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input9
dvb-ttpci: found av7110-0.
saa7146: unregister extension 'dvb'.
ACPI: PCI interrupt for device 0000:01:08.0 disabled
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
saa7146: found saa7146 @ mem f88e6000 (revision 1, irq 5) (0x13c2,0x000e).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3).
adapter has MAC addr = 00:d0:5c:24:0e:74
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input10
dvb-ttpci: found av7110-0.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
md: syncing RAID array md0
md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction.
md: using 128k window, over a total of 64128 blocks.
md: delaying resync of md1 until md0 has finished resync (they share one or more physical units)
md: md0: sync done.
md: syncing RAID array md1
md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction.
md: using 128k window, over a total of 243882688 blocks.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sda1
disk 1, wo:0, o:1, dev:sdb1
md: md1: sync done.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sda3
disk 1, wo:0, o:1, dev:sdb3

Das CX88-Modul, was da zweimal geladen wird, ist der Treiber für die Nova-Karten. Ich gehe mal davon aus, wenn die 2x da ist, das die dann auch funktioniert. Ob ich das Ganze nochmal als neuen Thread poste, vielleicht hat jemand mit Hardware mehr Ahnung als wir beide?

Trotzdem danke für den Denkanstoß, scheint schonmal in die richtige Richtung zu gehen!

Gruß, Flipsen

*heulschluchzschnief*

Jetzt muss ich einen neuen Kernel backen, irgendwie ist der derzeit installierte Treiber nicht in der Lage mit meinen Karten zu reden. Naja, wenigstens weiß ich, woran's liegt.

Danke!

Ok, neuer Kernel 2.6.17 mit aktuellen Treibern ist drauf, 3 Karten da, scheint zu klappen!

Danke nochmal!