Text2skin EgalsTry geht nicht!

Hallo Zusammen!

Habe Linvdr 0.7 und den mt-1.3.23-20050428 patch am laufen!

Ich bekomm unter Einstellungen/ OSD/ Oberfläche micht den Skin EgalsTry angezeigt obwol der Skin im Ordner etc/vdr/plugins/text2skin
ist

Muss man da noch woanders was einstellen?

Bitte um Hilfe!

Gruß Mark.

Hallo!

In /var/log/messages steht nur:

HINT: LinVDR is using the busybox syslogd.
Type "logread" or "logread -f" to see syslog messages.

Und im logread:

Jun 12 10:38:50 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
Jun 12 10:38:50 linvdr user.info kernel: via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
Jun 12 10:38:50 linvdr user.info kernel: ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 15 (level, low) -> IRQ 15
Jun 12 10:38:50 linvdr user.info kernel: 67, IRQ 15.
Jun 12 10:38:50 linvdr user.info kernel: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
Jun 12 10:38:50 linvdr user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Jun 12 10:38:50 linvdr user.info kernel: Linux video capture interface: v1.00
Jun 12 10:38:50 linvdr auth.info sshd[1017]: Server listening on 0.0.0.0 port 22.
Jun 12 10:38:50 linvdr daemon.info init: ^MStarting pid 1025, console /dev/tty1: '/sbin/getty'
Jun 12 10:38:50 linvdr daemon.info init: ^MStarting pid 1026, console /dev/tty2: '/sbin/getty'
Jun 12 10:38:50 linvdr daemon.info init: ^MStarting pid 1028, console /dev/tty3: '/sbin/getty'
Jun 12 10:38:50 linvdr daemon.info init: ^MStarting pid 1030, console /dev/tty4: '/sbin/getty'
Jun 12 10:38:51 linvdr user.warn kernel: saa7146: register extension 'dvb'.
Jun 12 10:38:51 linvdr user.info kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
Jun 12 10:38:51 linvdr user.warn kernel: found saa7146 @ mem c6864000 (revision 1, irq 11) (0x13c2,0x1002).
Jun 12 10:38:51 linvdr user.warn kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev1.3).
Jun 12 10:38:51 linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:2d:cc:71
Jun 12 10:38:52 linvdr user.warn kernel: dvb-ttpci: gpioirq unknown type=0 len=0
Jun 12 10:38:52 linvdr user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d
Jun 12 10:38:52 linvdr user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Jun 12 10:38:52 linvdr user.warn kernel: dvb-ttpci: adac type set to 0 @ card 0
Jun 12 10:38:52 linvdr user.warn kernel: saa7146 (0): registered device video0 [v4l2]
Jun 12 10:38:52 linvdr user.warn kernel: ves1x93: Detected ves1893a rev2
Jun 12 10:38:52 linvdr user.warn kernel: DVB: registering frontend 0 (VLSI VES1x93 DVB-S)...
Jun 12 10:38:52 linvdr user.info kernel: dvb-ttpci: found av7110-0.
Jun 12 10:38:52 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
Jun 12 10:38:52 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
Jun 12 10:38:52 linvdr user.warn kernel: saa7146: register extension 'budget dvb /w video in'.
Jun 12 10:38:52 linvdr user.warn kernel: lirc_dev: IR Remote Control driver registered, at major 61
Jun 12 10:38:52 linvdr user.warn kernel: lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
Jun 12 10:38:53 linvdr user.info kernel: lirc_serial: auto-detected active low receiver
Jun 12 10:38:53 linvdr user.warn kernel: lirc_dev: lirc_register_plugin:sample_rate: 0
Jun 12 10:38:54 linvdr user.info vdr[1118]: VDR version 1.3.23 started
Jun 12 10:38:54 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-burn.so.1.3.23
Jun 12 10:38:54 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-director.so.1.3.23
Jun 12 10:38:54 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.3.23
Jun 12 10:38:54 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-graphlcd.so.1.3.23
Jun 12 10:38:54 linvdr user.info vdr[1118]: graphlcd: No config file specified, using default (/etc/graphlcd.conf).
Jun 12 10:38:54 linvdr user.info vdr[1118]: graphlcd: WARNING: No display specified, using first one (ks0108).
Jun 12 10:38:54 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-text2skin.so.1.3.23
Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/setup.conf
Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/sources.conf
Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/diseqc.conf
Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/channels.conf
Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/commands.conf
Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/reccmds.conf
Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/svdrphosts.conf
Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/ca.conf
Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/remote.conf
Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/keymacros.conf
Jun 12 10:38:55 linvdr user.debug vdr[1118]: probing /dev/dvb/adapter0/frontend0
Jun 12 10:38:55 linvdr user.debug vdr[1123]: tuner on device 1 thread started (pid=1123, tid=1026)
Jun 12 10:38:55 linvdr user.debug vdr[1118]: probing /dev/dvb/adapter1/frontend0
Jun 12 10:38:55 linvdr user.info vdr[1118]: found 1 video device
Jun 12 10:38:55 linvdr user.info vdr[1118]: initializing plugin: burn (0.0.6f): Versatile convert-and-burn plugin
Jun 12 10:38:55 linvdr user.info vdr[1118]: initializing plugin: director (0.2.0): plugin to use the premiere multifeed option
Jun 12 10:38:55 linvdr user.info vdr[1118]: initializing plugin: femon (0.8.7): DVB Signal Information Monitor (OSD)
Jun 12 10:38:55 linvdr user.info vdr[1118]: initializing plugin: graphlcd (0.1.2-pre5): Output to graphic LCD
Jun 12 10:38:55 linvdr user.debug vdr[1124]: Section handler thread started (pid=1124, tid=2051)
Jun 12 10:38:55 linvdr user.info vdr[1118]: initializing plugin: text2skin (1.0): Loader for text-based skins
Jun 12 10:38:55 linvdr user.info vdr[1118]: setting primary device to 1
Jun 12 10:38:55 linvdr user.debug vdr[1125]: ks0108: benchmark started.
Jun 12 10:38:55 linvdr user.info vdr[1118]: SVDRP listening on port 2001
Jun 12 10:38:55 linvdr user.debug vdr[1125]: ks0108: benchmark stopped. Time for Command: 1614ns
Jun 12 10:38:55 linvdr user.info vdr[1125]: ks0108: KS0108 initialized.
Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/themes/classic-default.theme
Jun 12 10:38:55 linvdr user.info vdr[1118]: starting plugin: burn
Jun 12 10:38:55 linvdr user.info vdr[1118]: starting plugin: director
Jun 12 10:38:55 linvdr user.info vdr[1118]: starting plugin: femon
Jun 12 10:38:55 linvdr user.info vdr[1118]: starting plugin: graphlcd
Jun 12 10:38:55 linvdr user.debug vdr[1118]: graphlcd: waiting for display thread to get ready
Jun 12 10:38:55 linvdr user.debug vdr[1118]: graphlcd: display thread ready
Jun 12 10:38:55 linvdr user.info vdr[1118]: starting plugin: text2skin
Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.trans
Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.colors
Jun 12 10:38:55 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.skin
Jun 12 10:38:55 linvdr user.err vdr[1118]: ERROR: text2skin: Skin is version , expecting 1.0
Jun 12 10:38:55 linvdr user.debug vdr[1125]: graphlcd plugin: Display update thread started (pid=1125)
Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/demo/demo.trans
Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/demo/demo.colors
Jun 12 10:38:55 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/demo/demo.skin
Jun 12 10:38:55 linvdr user.err vdr[1118]: ERROR: text2skin: Skin is version , expecting 1.0
Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.trans
Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.colors
Jun 12 10:38:55 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.skin
Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Enigma/Enigma.trans
Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Enigma/Enigma.colors
Jun 12 10:38:55 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/Enigma/Enigma.skin
Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.trans
Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.colors
Jun 12 10:38:55 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.skin
Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/themes/DeepBlue-default.theme
Jun 12 10:38:55 linvdr user.debug vdr[1126]: LIRC remote control thread started (pid=1126, tid=4101)
Jun 12 10:38:55 linvdr user.debug vdr[1127]: KBD remote control thread started (pid=1127, tid=5126)
Jun 12 10:38:55 linvdr user.debug vdr[1118]: remote control LIRC - keys known
Jun 12 10:38:55 linvdr user.debug vdr[1118]: remote control KBD - keys known
Jun 12 10:38:55 linvdr user.info vdr[1118]: switching to channel 3
Jun 12 10:38:55 linvdr user.debug vdr[1118]: glcdgraphics: image /etc/vdr/plugins/graphlcd/logos/RTL TELEVISION_m.glcd loaded.
Jun 12 10:38:56 linvdr user.debug vdr[1118]: setting watchdog timer to 900 seconds
Jun 12 10:38:56 linvdr user.debug vdr[1128]: Text2Skin: channelInfo display update thread started (pid=1128, tid=6151)
Jun 12 10:39:00 linvdr user.info vdr[1118]: connect from 127.0.0.1, port 1024 - accepted
Jun 12 10:39:01 linvdr user.info vdr[1118]: closing SVDRP connection
Jun 12 10:39:01 linvdr user.debug vdr[1128]: Text2Skin: channelInfo display update thread ended (pid=1128, tid=6151)
Jun 12 10:39:02 linvdr user.debug vdr[1118]: assuming manual start of VDR
Jun 12 10:39:02 linvdr user.debug vdr[1118]: max. latency time 1 seconds
Jun 12 10:39:03 linvdr user.debug vdr[1131]: Text2Skin: channelInfo display update thread started (pid=1131, tid=7175)
Jun 12 10:39:06 linvdr user.info vdr[1118]: switching to channel 2
Jun 12 10:39:06 linvdr user.debug vdr[1118]: glcdgraphics: image /etc/vdr/plugins/graphlcd/logos/ZDF_m.glcd loaded.
Jun 12 10:39:06 linvdr user.info vdr[1118]: switching to channel 1
Jun 12 10:39:06 linvdr user.debug vdr[1118]: glcdgraphics: image /etc/vdr/plugins/graphlcd/logos/DAS ERSTE_m.glcd loaded.
Jun 12 10:39:08 linvdr user.info vdr[1118]: switching to channel 2
Jun 12 10:39:09 linvdr user.info vdr[1118]: switching to channel 3
Jun 12 10:39:09 linvdr user.info vdr[1118]: switching to channel 2
Jun 12 10:39:10 linvdr user.info vdr[1118]: switching to channel 1
Jun 12 10:39:22 linvdr cron.notice crond[1143]: crond 2.3.2 dillon, started, log level 8
Jun 12 10:39:44 linvdr auth.info sshd[1144]: Connection closed by 192.168.0.2
Jun 12 10:39:50 linvdr auth.info sshd[1145]: Could not reverse map address 192.168.0.2.
Jun 12 10:39:50 linvdr auth.info sshd[1145]: Accepted password for root from 192.168.0.2 port 1311 ssh2
Jun 12 10:39:50 linvdr auth.info PAM_unix[1145]: (ssh) session opened for user root by (uid=0)
Jun 12 10:39:50 linvdr auth.err PAM-env[1145]: Unable to open config file: No such file or directory
Jun 12 10:39:50 linvdr auth.err PAM-env[1146]: Unable to open config file: No such file or directory
Jun 12 10:40:01 linvdr cron.notice crond[1143]: USER root pid 1153 cmd convert.pl -q -s
Jun 12 10:41:29 linvdr auth.info PAM_unix[1145]: (ssh) session closed for user root
Jun 12 10:41:29 linvdr auth.err sshd[1145]: PAM pam_putenv: delete non-existent entry; MAIL
Jun 12 10:41:29 linvdr auth.err PAM-env[1145]: Unable to open config file: No such file or directory
Jun 12 10:43:28 linvdr auth.info sshd[1160]: Could not reverse map address 192.168.0.2.
Jun 12 10:43:30 linvdr auth.info sshd[1160]: Accepted password for root from 192.168.0.2 port 1361
Jun 12 10:43:30 linvdr auth.info PAM_unix[1160]: (ssh) session opened for user root by (uid=0)
Jun 12 10:43:30 linvdr auth.err PAM-env[1160]: Unable to open config file: No such file or directory
Jun 12 10:43:30 linvdr auth.err PAM-env[1161]: Unable to open config file: No such file or directory
linvdr:~#

Hallo Uwe!

Ich habe grade die EgalsTry von Dir in das Text2skin verzeichnis kopiert

aber es geht auch mit der version nicht

Hier nochmal das logread:Jun 13 16:40:18 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
Jun 13 16:40:18 linvdr user.info kernel: via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
Jun 13 16:40:18 linvdr user.info kernel: ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 15 (level, low) -> IRQ 15
Jun 13 16:40:18 linvdr user.info kernel: 67, IRQ 15.
Jun 13 16:40:18 linvdr user.info kernel: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
Jun 13 16:40:18 linvdr user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Jun 13 16:40:18 linvdr auth.info sshd[1010]: Server listening on 0.0.0.0 port 22.
Jun 13 16:40:18 linvdr daemon.info init: ^MStarting pid 1021, console /dev/tty1: '/sbin/getty'
Jun 13 16:40:18 linvdr daemon.info init: ^MStarting pid 1022, console /dev/tty2: '/sbin/getty'
Jun 13 16:40:18 linvdr daemon.info init: ^MStarting pid 1026, console /dev/tty4: '/sbin/getty'
Jun 13 16:40:18 linvdr user.info kernel: Linux video capture interface: v1.00
Jun 13 16:40:19 linvdr daemon.info init: ^MStarting pid 1024, console /dev/tty3: '/sbin/getty'
Jun 13 16:40:19 linvdr user.warn kernel: saa7146: register extension 'dvb'.
Jun 13 16:40:19 linvdr user.info kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
Jun 13 16:40:19 linvdr user.warn kernel: found saa7146 @ mem c6864000 (revision 1, irq 11) (0x13c2,0x1002).
Jun 13 16:40:19 linvdr user.warn kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev1.3).
Jun 13 16:40:19 linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:2d:cc:71
Jun 13 16:40:20 linvdr user.warn kernel: dvb-ttpci: gpioirq unknown type=0 len=0
Jun 13 16:40:20 linvdr user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d
Jun 13 16:40:20 linvdr user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Jun 13 16:40:20 linvdr user.warn kernel: dvb-ttpci: adac type set to 0 @ card 0
Jun 13 16:40:20 linvdr user.warn kernel: saa7146 (0): registered device video0 [v4l2]
Jun 13 16:40:20 linvdr user.warn kernel: ves1x93: Detected ves1893a rev2
Jun 13 16:40:20 linvdr user.warn kernel: DVB: registering frontend 0 (VLSI VES1x93 DVB-S)...
Jun 13 16:40:20 linvdr user.info kernel: dvb-ttpci: found av7110-0.
Jun 13 16:40:20 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
Jun 13 16:40:20 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
Jun 13 16:40:20 linvdr user.warn kernel: saa7146: register extension 'budget dvb /w video in'.
Jun 13 16:40:20 linvdr user.warn kernel: lirc_dev: IR Remote Control driver registered, at major 61
Jun 13 16:40:20 linvdr user.warn kernel: lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
Jun 13 16:40:21 linvdr user.info kernel: lirc_serial: auto-detected active low receiver
Jun 13 16:40:21 linvdr user.warn kernel: lirc_dev: lirc_register_plugin:sample_rate: 0
Jun 13 16:40:22 linvdr user.info vdr[1118]: VDR version 1.3.23 started
Jun 13 16:40:22 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-burn.so.1.3.23
Jun 13 16:40:22 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-director.so.1.3.23
Jun 13 16:40:22 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.3.23
Jun 13 16:40:22 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-graphlcd.so.1.3.23
Jun 13 16:40:22 linvdr user.info vdr[1118]: graphlcd: No config file specified, using default (/etc/graphlcd.conf).
Jun 13 16:40:22 linvdr user.info vdr[1118]: graphlcd: WARNING: No display specified, using first one (ks0108).
Jun 13 16:40:22 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-text2skin.so.1.3.23
Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/setup.conf
Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/sources.conf
Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/diseqc.conf
Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/channels.conf
Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/timers.conf
Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/commands.conf
Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/reccmds.conf
Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/svdrphosts.conf
Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/ca.conf
Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/remote.conf
Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/keymacros.conf
Jun 13 16:40:23 linvdr user.debug vdr[1118]: reading EPG data from /ramdisk/epg.data
Jun 13 16:40:23 linvdr user.debug vdr[1118]: probing /dev/dvb/adapter0/frontend0
Jun 13 16:40:23 linvdr user.debug vdr[1118]: probing /dev/dvb/adapter1/frontend0
Jun 13 16:40:23 linvdr user.info vdr[1118]: found 1 video device
Jun 13 16:40:23 linvdr user.info vdr[1118]: initializing plugin: burn (0.0.6f): Versatile convert-and-burn plugin
Jun 13 16:40:23 linvdr user.info vdr[1118]: initializing plugin: director (0.2.0): plugin to use the premiere multifeed option
Jun 13 16:40:23 linvdr user.info vdr[1118]: initializing plugin: femon (0.8.7): DVB Signal Information Monitor (OSD)
Jun 13 16:40:23 linvdr user.info vdr[1118]: initializing plugin: graphlcd (0.1.2-pre5): Output to graphic LCD
Jun 13 16:40:23 linvdr user.debug vdr[1123]: tuner on device 1 thread started (pid=1123, tid=1026)
Jun 13 16:40:23 linvdr user.debug vdr[1124]: Section handler thread started (pid=1124, tid=2051)
Jun 13 16:40:23 linvdr user.info vdr[1118]: initializing plugin: text2skin (1.0): Loader for text-based skins
Jun 13 16:40:23 linvdr user.info vdr[1118]: setting primary device to 1
Jun 13 16:40:23 linvdr user.debug vdr[1125]: ks0108: benchmark started.
Jun 13 16:40:23 linvdr user.info vdr[1118]: SVDRP listening on port 2001
Jun 13 16:40:23 linvdr user.debug vdr[1125]: ks0108: benchmark stopped. Time for Command: 1613ns
Jun 13 16:40:23 linvdr user.info vdr[1125]: ks0108: KS0108 initialized.
Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/themes/classic-default.theme
Jun 13 16:40:23 linvdr user.info vdr[1118]: starting plugin: burn
Jun 13 16:40:23 linvdr user.info vdr[1118]: starting plugin: director
Jun 13 16:40:23 linvdr user.info vdr[1118]: starting plugin: femon
Jun 13 16:40:23 linvdr user.info vdr[1118]: starting plugin: graphlcd
Jun 13 16:40:23 linvdr user.debug vdr[1118]: graphlcd: waiting for display thread to get ready
Jun 13 16:40:23 linvdr user.debug vdr[1118]: graphlcd: display thread ready
Jun 13 16:40:23 linvdr user.info vdr[1118]: starting plugin: text2skin
Jun 13 16:40:23 linvdr user.debug vdr[1125]: graphlcd plugin: Display update thread started (pid=1125)
Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.trans
Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.colors
Jun 13 16:40:23 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.skin
Jun 13 16:40:23 linvdr user.err vdr[1118]: ERROR: Unexpected token {RecordingName}
Jun 13 16:40:23 linvdr user.err vdr[1118]: ERROR: Text2Skin: Unexpected value not(or({PresentTitle},{RecordingName})) for attribute condition
Jun 13 16:40:23 linvdr user.err vdr[1118]: ERROR: Text2Skin: Parse error in /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.skin, line 12
Jun 13 16:40:23 linvdr user.err vdr[1118]: ERROR: error in skin file
Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/demo/demo.trans
Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/demo/demo.colors
Jun 13 16:40:23 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/demo/demo.skin
Jun 13 16:40:23 linvdr user.err vdr[1118]: ERROR: text2skin: Skin is version , expecting 1.0
Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.trans
Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.colors
Jun 13 16:40:23 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.skin
Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Enigma/Enigma.trans
Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Enigma/Enigma.colors
Jun 13 16:40:23 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/Enigma/Enigma.skin
Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.trans
Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.colors
Jun 13 16:40:23 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.skin
Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/themes/DeepBlue-default.theme
Jun 13 16:40:23 linvdr user.debug vdr[1126]: LIRC remote control thread started (pid=1126, tid=4101)
Jun 13 16:40:23 linvdr user.debug vdr[1127]: KBD remote control thread started (pid=1127, tid=5126)
Jun 13 16:40:23 linvdr user.debug vdr[1118]: remote control LIRC - keys known
Jun 13 16:40:23 linvdr user.debug vdr[1118]: remote control KBD - keys known
Jun 13 16:40:23 linvdr user.info vdr[1118]: switching to channel 1
Jun 13 16:40:23 linvdr user.debug vdr[1118]: glcdgraphics: image /etc/vdr/plugins/graphlcd/logos/DAS ERSTE_m.glcd loaded.
Jun 13 16:40:24 linvdr user.debug vdr[1118]: setting watchdog timer to 900 seconds
Jun 13 16:40:24 linvdr user.debug vdr[1128]: Text2Skin: channelInfo display update thread started (pid=1128, tid=6151)
Jun 13 16:40:28 linvdr user.info vdr[1118]: connect from 127.0.0.1, port 1024 - accepted
Jun 13 16:40:29 linvdr user.info vdr[1118]: closing SVDRP connection
Jun 13 16:40:29 linvdr user.debug vdr[1128]: Text2Skin: channelInfo display update thread ended (pid=1128, tid=6151)
Jun 13 16:40:30 linvdr user.debug vdr[1118]: max. latency time 1 seconds
Jun 13 16:40:50 linvdr cron.notice crond[1142]: crond 2.3.2 dillon, started, log level 8
Jun 13 16:41:08 linvdr user.debug vdr[1143]: Text2Skin: channelInfo display update thread started (pid=1143, tid=7175)
Jun 13 16:41:13 linvdr user.debug vdr[1143]: Text2Skin: channelInfo display update thread ended (pid=1143, tid=7175)
Jun 13 16:41:13 linvdr user.debug vdr[1144]: Text2Skin: menu display update thread started (pid=1144, tid=8199)
Jun 13 16:41:34 linvdr user.info vdr[1118]: loading /etc/vdr/themes/DeepBlue-default.theme
Jun 13 16:41:34 linvdr user.info vdr[1118]: saved setup to /etc/vdr/setup.conf
Jun 13 16:41:37 linvdr user.debug vdr[1144]: Text2Skin: menu display update thread ended (pid=1144, tid=8199)
Jun 13 16:45:01 linvdr cron.notice crond[1142]: USER root pid 1145 cmd convert.pl -q -s
Jun 13 16:46:40 linvdr auth.info sshd[1146]: Could not reverse map address 192.168.0.2.
Jun 13 16:46:42 linvdr auth.info sshd[1146]: Accepted password for root from 192.168.0.2 port 1796
Jun 13 16:46:42 linvdr auth.info sshd[1146]: lastlog_get_entry: Error reading from /var/log/lastlog: No such file or directory
Jun 13 16:46:42 linvdr auth.info PAM_unix[1146]: (ssh) session opened for user root by (uid=0)
Jun 13 16:46:42 linvdr auth.err PAM-env[1146]: Unable to open config file: No such file or directory
Jun 13 16:46:42 linvdr auth.err PAM-env[1147]: Unable to open config file: No such file or directory
linvdr:~#

Sonst noch eine Idee warum es nicht geht?

Gruß Mark.

Hallo Zusammen!

Jetzt klapt es mit den Skin

Besten Dank für Eure Hilfe!

Gruß Mark.