permanenter Neuaufruf des runvdr-scripts

  • Hallo,


    ich habe mir das neueste 'vdr-install-script' vom FTP server runtergeladen, meine Plugins soweit runtergeladen und konfiguriert. Wenn ich anschliessend 'runvdr start' aufrufe, startet runvdr permanent. Das logging Level ist bereits auf Level 3. Wo kann ich weitersuchen? Das kursiv markierte im Syslog verstehe ich nicht... Ist das jetzt ein Fehler - oder keiner?


    Karlheinz


    ### SYSLOG ####
    Jun 10 16:15:10 knechtle kernel: Linux video capture interface: v1.00
    Jun 10 16:15:10 knechtle udevd[2326]: move seq 1569 with timeout 10 to exec queue
    Jun 10 16:15:10 knechtle kernel: saa7146: register extension 'dvb'.
    Jun 10 16:15:10 knechtle kernel: ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 15 (level, low) -> IRQ 15
    Jun 10 16:15:10 knechtle kernel: saa7146: found saa7146 @ mem f9328000 (revision 1, irq 15) (0x13c2,0x0003).
    Jun 10 16:15:10 knechtle udevd[2326]: move seq 1570 with timeout 10 to exec queue
    Jun 10 16:15:10 knechtle kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
    Jun 10 16:15:10 knechtle kernel: adapter has MAC addr = 00:d0:5c:22:ef:d8
    Jun 10 16:15:10 knechtle kernel: dvb-ttpci: gpioirq unknown type=0 len=0
    Jun 10 16:15:10 knechtle kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261f
    Jun 10 16:15:10 knechtle kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
    Jun 10 16:15:10 knechtle kernel: dvb-ttpci: Crystal audio DAC @ card 0 detected
    Jun 10 16:15:10 knechtle kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
    Jun 10 16:15:10 knechtle kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)...
    Jun 10 16:15:10 knechtle kernel: dvb-ttpci: found av7110-0.
    Jun 10 16:15:26 knechtle vdr[22219]: VDR version 1.3.34 started
    Jun 10 16:15:26 knechtle vdr[22219]: loading /video0/setup.conf
    Jun 10 16:15:26 knechtle vdr[22219]: loading /video0/sources.conf
    Jun 10 16:15:26 knechtle vdr[22219]: loading /video0/diseqc.conf
    Jun 10 16:15:26 knechtle vdr[22219]: loading /video0/channels.conf
    Jun 10 16:15:26 knechtle vdr[22219]: loading /video0/timers.conf
    Jun 10 16:15:26 knechtle vdr[22219]: loading /video0/svdrphosts.conf
    Jun 10 16:15:26 knechtle vdr[22219]: loading /video0/ca.conf
    Jun 10 16:15:26 knechtle vdr[22219]: loading /video0/remote.conf
    Jun 10 16:15:26 knechtle vdr[22219]: loading /video0/keymacros.conf
    Jun 10 16:15:26 knechtle vdr[22219]: reading EPG data from /video0/epg.data
    Jun 10 16:15:26 knechtle vdr[22219]: video directory scanner thread started (pid=22219, tid=1078602672)
    Jun 10 16:15:26 knechtle vdr[22219]: probing /dev/dvb/adapter0/frontend0
    Jun 10 16:15:28 knechtle vdr[22219]: video directory scanner thread ended (pid=22219, tid=1078602672)
    Jun 10 16:15:29 knechtle vdr[22219]: probing /dev/dvb/adapter1/frontend0
    Jun 10 16:15:29 knechtle vdr[22219]: ERROR: /dev/dvb/adapter1/frontend0: Kein passendes Gerät bzw. keine passende Adresse gefunden
    Jun 10 16:15:29 knechtle vdr[22219]: found 1 video device
    Jun 10 16:15:29 knechtle vdr[22219]: setting primary device to 1
    Jun 10 16:15:29 knechtle vdr[22219]: tuner on device 1 thread started (pid=22219, tid=1078602672)
    Jun 10 16:15:29 knechtle vdr[22219]: section handler thread started (pid=22219, tid=1082133424)
    Jun 10 16:15:29 knechtle vdr[22219]: SVDRP listening on port 2001
    Jun 10 16:15:29 knechtle vdr[22219]: loading /video0/themes/sttng-default.theme
    Jun 10 16:15:29 knechtle vdr[22219]: loading /video0/themes/sttng-default.theme
    Jun 10 16:15:29 knechtle vdr[22219]: remote control KBD - learning keys
    Jun 10 16:15:29 knechtle vdr[22219]: KBD remote control thread started (pid=22219, tid=1084402608)
    Jun 10 16:15:39 knechtle vdr[22219]: switching to channel 4
    Jun 10 16:15:40 knechtle vdr[22219]: channel 22 (Super RTL) event 16:10 'Dragon Hunters - Die Drachenjäger' status 4
    Jun 10 16:15:40 knechtle vdr[22219]: channel 1 (RTL Television) event 15:50 'Die lustigsten Schlamassel der Welt' status 4
    Jun 10 16:15:40 knechtle vdr[22219]: channel 4 (RTL2) event 12:45 'Denn meine Liebe ist unsterblich' status 4
    Jun 10 16:15:40 knechtle vdr[22219]: channel 23 (VOX) event 15:05 'Die Sportskanonen' status 4
    Jun 10 16:15:42 knechtle vdr[22219]: changing transponder data of channel 908 from S19.2E:12168:v:27500:3 to S19.2E:12168:v:27500:5
    Jun 10 16:15:42 knechtle vdr[22219]: changing transponder data of channel 1754 from S19.2E:12522:v:22000:5 to S19.2E:12522:v:22000:2
    Jun 10 16:15:42 knechtle vdr[22219]: changing transponder data of channel 1755 from S19.2E:12522:v:22000:5 to S19.2E:12522:v:22000:2
    Jun 10 16:15:42 knechtle vdr[22219]: changing transponder data of channel 1756 from S19.2E:12522:v:22000:5 to S19.2E:12522:v:22000:2
    Jun 10 16:15:42 knechtle vdr[22219]: changing transponder data of channel 1757 from S19.2E:12522:v:22000:5 to S19.2E:12522:v:22000:2
    Jun 10 16:15:44 knechtle vdr[22219]: video directory scanner thread started (pid=22219, tid=1086503856)
    Jun 10 16:15:45 knechtle vdr[22219]: changing pids of channel 1 from 163+163:104=deu:105 to 163+163:104=deu;106=deu:105
    Jun 10 16:15:45 knechtle vdr[22219]: video directory scanner thread ended (pid=22219, tid=1086503856)
    Jun 10 16:16:02 knechtle vdr[22219]: caught signal 2
    Jun 10 16:16:02 knechtle vdr[22219]: KBD remote control thread ended (pid=22219, tid=1084402608)
    Jun 10 16:16:02 knechtle vdr[22219]: saved setup to /video0/setup.conf
    Jun 10 16:16:02 knechtle vdr[22219]: tuner on device 1 thread ended (pid=22219, tid=1078602672)
    Jun 10 16:16:02 knechtle vdr[22219]: section handler thread ended (pid=22219, tid=1082133424)
    Jun 10 16:16:02 knechtle vdr[22219]: =====================
    Jun 10 16:16:02 knechtle vdr[22219]: EPG bugfix statistics
    Jun 10 16:16:02 knechtle vdr[22219]: =====================
    Jun 10 16:16:02 knechtle vdr[22219]: IF SOMEBODY WHO IS IN CHARGE OF THE EPG DATA FOR ONE OF THE LISTED
    Jun 10 16:16:02 knechtle vdr[22219]: CHANNELS READS THIS: PLEASE TAKE A LOOK AT THE FUNCTION cEvent::FixEpgBugs()
    Jun 10 16:16:02 knechtle vdr[22219]: IN VDR/epg.c TO LEARN WHAT'S WRONG WITH YOUR DATA, AND FIX IT!
    Jun 10 16:16:02 knechtle vdr[22219]: =====================
    Jun 10 16:16:02 knechtle vdr[22219]: Fix Hits Channels
    Jun 10 16:16:02 knechtle vdr[22219]: 5 1 RTL Television
    Jun 10 16:16:02 knechtle vdr[22219]: =====================
    Jun 10 16:16:02 knechtle vdr[22219]: exiting
    Jun 10 16:16:20 knechtle runvdr: starting ... /usr/local/bin/vdr --config="/usr/local/etc/vdr" --epg="/usr/local/etc/vdr/epg.data" --lib="/usr/local/lib/vdr" --log="3" --record="/usr/local/etc/vdr/scripts/rwrapper.sh" --shutdown="/usr/local/etc/vdr/scripts/shutdown.sh" --user="root" --video="/video0" --watchdog="60" ...
    Jun 10 16:16:25 knechtle runvdr: starting ... /usr/local/bin/vdr --config="/usr/local/etc/vdr" --epg="/usr/local/etc/vdr/epg.data" --lib="/usr/local/lib/vdr" --log="3" --record="/usr/local/etc/vdr/scripts/rwrapper.sh" --shutdown="/usr/local/etc/vdr/scripts/shutdown.sh" --user="root" --video="/video0" --watchdog="60" ...
    Jun 10 16:16:31 knechtle runvdr: starting ... /usr/local/bin/vdr --config="/usr/local/etc/vdr" --epg="/usr/local/etc/vdr/epg.data" --lib="/usr/local/lib/vdr" --log="3" --record="/usr/local/etc/vdr/scripts/rwrapper.sh" --shutdown="/usr/local/etc/vdr/scripts/shutdown.sh" --user="root" --video="/video0" --watchdog="60" ...
    Jun 10 16:16:36 knechtle runvdr: starting ... /usr/local/bin/vdr --config="/usr/local/etc/vdr" --epg="/usr/local/etc/vdr/epg.data" --lib="/usr/local/lib/vdr" --log="3" --record="/usr/local/etc/vdr/scripts/rwrapper.sh" --shutdown="/usr/local/etc/vdr/scripts/shutdown.sh" --user="root" --video="/video0" --watchdog="60" ...
    Jun 10 16:16:41 knechtle runvdr: starting ... /usr/local/bin/vdr --config="/usr/local/etc/vdr" --epg="/usr/local/etc/vdr/epg.data" --lib="/usr/local/lib/vdr" --log="3" --record="/usr/local/etc/vdr/scripts/rwrapper.sh" --shutdown="/usr/local/etc/vdr/scripts/shutdown.sh" --user="root" --video="/video0" --watchdog="60" ...
    Jun 10 16:16:46 knechtle runvdr: starting ... /usr/local/bin/vdr --config="/usr/local/etc/vdr" --epg="/usr/local/etc/vdr/epg.data" --lib="/usr/local/lib/vdr" --log="3" --record="/usr/local/etc/vdr/scripts/rwrapper.sh" --shutdown="/usr/local/etc/vdr/scripts/shutdown.sh" --user="root" --video="/video0" --watchdog="60" ...
    Jun 10 16:16:51 knechtle runvdr: starting ... /usr/local/bin/vdr --config="/usr/local/etc/vdr" --epg="/usr/local/etc/vdr/epg.data" --lib="/usr/local/lib/vdr" --log="3" --record="/usr/local/etc/vdr/scripts/rwrapper.sh" --shutdown="/usr/local/etc/vdr/scripts/shutdown.sh" --user="root" --video="/video0" --watchdog="60" ...

    -------
    Produktiv: Windows Vista MCE, x64, FireDTV DVB-C-Karte
    Test: c't VDR 6.2 mit Hauppauge Nexus DVB-S

  • Kling so als ob er den Tuner nicht ansprechen kann.


    Versuch mal den DVR ohne das Script aufzurufen, um dir die Restarts zu ersparen. Abgespeckt wäre das


    /usr/local/bin/vdr --config="/usr/local/etc/vdr" --epg="/usr/local/etc/vdr/epg.data" --lib="/usr/local/lib/vdr" --log="3" --user="root" --video="/video0"

  • Hm,


    wenn ich die Commandline eingebe, dann scheint es zu funktionieren - ich bekomme jedoch den Fehler
    [..]
    Jun 10 23:31:08 knechtle vdr[22766]: probing /dev/dvb/adapter1/frontend0
    Jun 10 23:31:08 knechtle vdr[22766]: ERROR: /dev/dvb/adapter1/frontend0: Kein passendes Gerät bzw. keine passende Adresse gefunden
    Jun 10 23:31:08 knechtle vdr[22766]: found 1 video device
    Jun 10 23:31:08 knechtle vdr[22766]: setting primary device to 1
    Jun 10 23:31:08 knechtle vdr[22766]: tuner on device 1 thread started (pid=22766, tid=1078602672)
    Jun 10 23:31:08 knechtle vdr[22766]: section handler thread started (pid=22766, tid=1080703920)
    [..]
    im Syslog angezeigt.

    -------
    Produktiv: Windows Vista MCE, x64, FireDTV DVB-C-Karte
    Test: c't VDR 6.2 mit Hauppauge Nexus DVB-S

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!