hallo
kann mir vielleicht jemand das /etc/init.d/lirc skript posten.
nutze ctvdr 3
hab meines aus versehen gelöscht.
mfg
martin
hallo
kann mir vielleicht jemand das /etc/init.d/lirc skript posten.
nutze ctvdr 3
hab meines aus versehen gelöscht.
mfg
martin
apt-get install lirc --reinstall -o Dpkg::Options::=--force-confmiss
Vorher ev /etc/lirc sichern sollte aber meines Wissens erhalten bleiben.
Den habe ich glaube auch von det ctvdr 3 uebernommen.
vdr:~# cat /etc/init.d/lirc
#! /bin/sh
#
#
load_modules ()
{
setserial /dev/ttyS1 uart none
local MODULES_MISSING=false
for mod in $*
do
modprobe -k $mod 2> /dev/null MODULES_MISSING=true
done
if $MODULES_MISSING; then
echo "#####################################################"
echo "## I couldn't load the required kernel modules ##"
echo "## You should install lirc-modules-source to build ##"
echo "## kernel support for your hardware. ##"
echo "#####################################################"
echo "## If this message is not appropriate you may set ##"
echo "## LOAD_MODULES=false in /etc/lirc/hardware.conf ##"
echo "#####################################################"
START_LIRCMD=false
START_LIRCD=false
fi
}
build_args ()
{
local ARGS="$*"
if [ -n "$DEVICE" ] && [ "$DEVICE" != "none" ]; then
if [ -d /dev/lirc ] && [ "$DEVICE" = "/dev/lirc" ];then
#new device names
DEVICE="/dev/lirc/0"
fi
ARGS="--device=$DEVICE $ARGS"
fi
if [ -n "$DRIVER" ] && [ "$DRIVER" != "none" ]; then
ARGS="--driver=$DRIVER $ARGS"
fi
echo $ARGS
}
test -f /usr/local/sbin/lircd exit 0
test -f /usr/local/sbin/lircmd exit 0
#test -f /etc/lirc/lircd.conf exit 0
#test -f /etc/lirc/lircmd.conf exit 0
START_LIRCMD=true
START_LIRCD=true
if [ ! -f /etc/lirc/lircd.conf ] \
grep -q "^#UNCONFIGURED" /etc/lirc/lircd.conf;then
if [ "$1" = "start" ]; then
echo "############################################"
echo "## LIRC IS NOT CONFIGURED ##"
echo "## ##"
echo "## read /usr/share/doc/lirc/README.Debian ##"
echo "############################################"
fi
START_LIRCD=false
START_LIRCMD=false
fi
if [ ! -f /etc/lirc/lircmd.conf ] \
grep -q "^#UNCONFIGURED" /etc/lirc/lircmd.conf;then
START_LIRCMD=false
fi
if [ -f /etc/lirc/hardware.conf ];then
. /etc/lirc/hardware.conf
fi
case "$1" in
start)
if [ "$LOAD_MODULES" = "true" ] && [ "$START_LIRCD" = "true" ]; then
load_modules $MODULES
fi
echo -n "Starting lirc daemon:"
if $START_LIRCD; then
echo -n " lircd"
LIRCD_ARGS=`build_args $LIRCD_ARGS`
start-stop-daemon --start --quiet --exec /usr/local/sbin/lircd -- $LIRCD_ARGS \
< /dev/null
fi
if $START_LIRCMD; then
echo -n " lircmd"
start-stop-daemon --start --quiet --exec /usr/local/sbin/lircmd \
< /dev/null
fi
echo "."
;;
stop)
echo -n "Stopping lirc daemon:"
echo -n " lircmd"
start-stop-daemon --stop --quiet --exec /usr/local/sbin/lircmd
echo -n " lircd"
start-stop-daemon --stop --quiet --exec /usr/local/sbin/lircd
echo "."
;;
reload|force-reload)
if $START_LIRCD; then
start-stop-daemon --stop --quiet --signal 1 --exec /usr/local/sbin/lircd
fi
if $START_LIRCMD; then
start-stop-daemon --stop --quiet --signal 1 --exec /usr/local/sbin/lircmd
fi
;;
restart)
$0 stop
$0 start
;;
*)
echo "Usage: /etc/init.d/lircd {start|stop|reload|restart|force-reload}"
exit 1
esac
exit 0
-.> Kovold
besten dank
mfg martin
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!