probleme mit linvdr 0.7

Hmmm, looks like an unmatching channels.conf. Could you perhaps ask another user living close to you? Scanning channels is not that easy.

As workaround: Delete all entries in your channels.conf except the first. Then let VDR scan for new transponders or new channels (in the settings menu).

Best regards, Mirko

Zitat

Original von cooper
I hope you tried VDR without any plugins. And had a look into "logread". Which error does he display now?

Best regards, Mirko

I disabled the plugins with clean install and did not add any firmware files. Here a part of the logread:

from my logread:

linvdr user.warn kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-T rev1.x)
linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:01:5c:ea
linvdr user.warn kernel: dvb-ttpci: gpioirq unknown type=0 len=0
linvdr user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261c
linvdr user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
linvdr user.warn kernel: dvb-ttpci: Chrystal audio DA @ card 0 detected
linvdr user.warn kernel: saa7146: registered device video0 [v412]
linvdr user.warn kernel: DVB: registering frontend0 (Spase SP8870 DVB-T]
linvdr user.info kernel: dvb-ttpci: found av7110-0.
linvdr user.warn kernel: saa7146: register extension 'budget dvb'
linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'
linvdr user.warn kernel: saa7146: register extension 'budget dvb /w video in'
linvdr user.warn kernel: lirc_dev: IR Remote Control driver registered, at major 61
linvdr user.warn kernel: lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted
linvdr user.info kernel: lirc_serial: auto-detected active high receiver

linvdr user.warn kernel: lirc_dev: lirc_register_plugin:sample_rate: 0
linvdr daemon.notec linrcd 0.70pre4[1110]: lircd(serial) ready
linvdr user.info vdr[1126] VDR version 1.3.17 started
linvdr user.info vdr[1126] loading /etc/vdr/setup.conf
linvdr user.info vdr[1126] loading /etc/vdr/sources.conf
linvdr user.info vdr[1126] loading /etc/vdr/diseqc.conf
linvdr user.info vdr[1126] saved setup to /etc/vdr/setup.conf
linvdr user.debug vdr[1126] nax. latency time 0 seconds
linvdr user.info vdr[1126] exiting
linvdr user.info vdr[1126]

Zitat

Original von cooper
Hmmm, looks like an unmatching channels.conf. Could you perhaps ask another user living close to you? Scanning channels is not that easy.

As workaround: Delete all entries in your channels.conf except the first. Then let VDR scan for new transponders or new channels (in the settings menu).

Best regards, Mirko

Thank you very much, Mirko. This helped and the VDR started ok, because I can see something like date and time on tv screen. Also keys 1-9 and + and 1 work.

Should the channels.conf -file contain the local channels and frequencies? Any examples of this channels.conf DVB-T?

If you meet problems installing Linvdr 0.7 and you have Technotrend Premium DVB-T 1.2, do this:

1. Install LinVDR
2. Copy a file SC_MAIN.MC from TechnoTrend Windows drivers package to /usr/lib/hotplug/firmware/ as dvb-fe-sp8870.fw
3. Make sure you have right channels.conf file or let the vdr tune channels.