Hallo ihr Gurus,
ich habe ein MSI-Board mit Intel-Chipsatz, das nicht erkannt wird. Daraufhin habe die 4 Schritte des guess-helpers ausgeführt und folgende nvram-wakeup.conf erhalten:
################################################
## Mainboard autodetection information:
##
## - Mainboard vendor: ""
## - Mainboard type: "i845PE-W83627"
## - Mainboard revision: ""
## - BIOS vendor: "Phoenix Technologies, LTD"
## - BIOS version: "6.00 PG"
## - BIOS release: "12/04/2002"
addr_stat = 0x46 # but differs somewhere else
addr_day = 0x47
addr_hour = 0x48
addr_min = 0x49
addr_sec = 0x4A
addr_stat = 0x70 # but differs somewhere else
shift_stat = 1
Soweit, so gut.
Wenn ich aber, der Anleitung folgend, dieses eingebe
/usr/sbin# nvram-wakeup -C /etc/nvram-wakeup.conf --directisa -s $((`date +%s` + 10 * 60))
kriege ich diese Meldung
nvram-wakeup: /etc/nvram-wakeup.conf: 17: Previous definition of variable `addr_stat': first definition in line 12
Die Datei guess-error.log sieht so aus
Datei: guess-error.log Spalte 0 3351 Bytes 0%
$Id: guess.c,v 1.21.2.1 2004/03/07 00:43:21 tiber Exp $
Opened file 31.23.59.59+ readonly...
Opened file 11.12.13.14+ readonly...
Opened file 01.00.00.00+ readonly...
Opened file 01.00.00.00- readonly...
Assuming size of files 256 bytes
guess: Opening /dev/mem in O_RDONLY mode...
guess: _DMI_ table found: base: 0xF0000, size: 0x35E, count: 34
guess: data block 1 at offset 0x000: type 0, size 0x013 ( 19)
guess: found string "Phoenix Technologies, LTD"
guess: found string "6.00 PG"
guess: found string "12/04/2002"
guess: data block 2 at offset 0x041: type 1, size 0x019 (25)
guess: data block 3 at offset 0x063: type 2, size 0x008 (8 )
guess: found string ""
guess: found string "i845PE-W83627"
guess: found string ""
guess: data block 4 at offset 0x080: type 3, size 0x00D ( 13)
guess: data block 5 at offset 0x096: type 4, size 0x020 ( 32)
guess: data block 6 at offset 0x0DB: type 5, size 0x014 ( 20)
guess: data block 7 at offset 0x0F1: type 6, size 0x00C ( 12)
guess: data block 8 at offset 0x101: type 6, size 0x00C ( 12)
und alle "Zeit-Dateien" (z.B. file 31.23.59.59+ usw.) haben 256 Byte und sind mit Daten "beladen"
aber wenn ich eingebe
/usr/sbin# cat_nvram >/dev/null
ist das Ergebnis
cat_nvram: Requesting permissions for io ports 0x70...0x73
cat_nvram: The size of NVRAM is 128 bytes.
d.h. das NV-RAM ist auf die Hälfte geschrumpft und die ganze Sache funzt natürlich nicht.
Bitte helft Rudi Ratlos!!
Danke für alle Tips
Peter