Hallo!
Wegen einem Plattencrash musste ich gerade meinen VDR neu installieren.
Ich nutze dazu Ubuntu 14.04-Server.
VDR läuft soweit wieder wie gewöhnt, aber nur mit der SD-Karte.
Aber die HD-Karte funktoiniert in VDR nicht mehr.
Vom System her scheinen die TV-Karten aber zu funktionieren:
Code
01:08.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
01:08.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
01:0a.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)Code
[ 10.508153] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[ 10.508160] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 19.828679] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[ 9.180145] DVB: registering new adapter (FlexCop Digital TV device)
[ 9.671464] b2c2-flexcop: found 'ST STV0299 DVB-S' .
[ 9.671479] b2c2_flexcop_pci 0000:01:0a.0: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
[ 9.671758] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 9.674947] cx88[0]: subsystem: d464:9022, board: TeVii S464 DVB-S/S2 [card=86,autodetected], frontend(s): 1
[ 10.284180] input: cx88 IR (TeVii S464 DVB-S/S2) as /devices/pci0000:00/0000:00:04.0/0000:01:08.0/rc/rc0/input5
[ 10.284392] rc0: cx88 IR (TeVii S464 DVB-S/S2) as /devices/pci0000:00/0000:00:04.0/0000:01:08.0/rc/rc0
[ 10.508164] cx88[0]/2: subsystem: d464:9022, board: TeVii S464 DVB-S/S2 [card=86]
[ 10.508167] cx88[0]/2: cx2388x based DVB/ATSC card
[ 10.692033] DVB: registering new adapter (cx88[0])
[ 10.692042] cx88-mpeg driver manager 0000:01:08.2: DVB: registering adapter 1 frontend 0 (Montage Technology DS3000)...Hab ich irgendwo was vergessen einzustellen?