Streamdev-Client und lokale TV-Karten

Streamdev-Client Option "Empfangssysteme / Kosten". Aus dem README:

Zitat

You can also configure the "Broadcast Systems / Cost" of the streamdev-client
device. On a pure streamdev-client only system it doesn't matter what you
configure here. But if your client is equipped with a DVB card, you should read
on. VDR always prefers the cheapest device in terms of supported broadcast
systems and modulations. A DVB-S2 card supports two broadcast systems (DVB-S and
DVB-S2). The supported modulations are counted as well (QPSK, QAM32/64/128/256,
VSB8/16, TURBO_FEC). So for a DVB-S2 card which does QPSK you'll get a total
cost of three. A DVB-C card (one broadcast system) which can do QAM32, QAM64,
QAM128, QAM256 would give you a total of five. Check your log for "frontend ...
provides ... with ..." messages to find out the cost of your DVB cards. Then
pick a suitable value for streamdev-client. With equal costs, VDR will usually
prefer the DVB card and take streamdev for recordings. If streamdev's costs are
higher, live TV will use your DVB card until a recordings kicks in. Then the
recording will take the DVB card and live TV will be shifted to streamdev
(you'll notice a short interruption of live TV).

Alles anzeigen