Hallo,
Nachdem der Versuch meinen USB Empfänger zum laufen zu bringen von hier scheiterte --> zu neu, habe ich mal einen seriellen Empfänger herausgekramt.
Im WIF habe ich
LIRC Hacken gesetzt
Home-brew (16x50 UART compatible serial port) ausgewählt
/dev/ttyS0 (COM1) ausgewählt
Hier die /etc/lirc/hardware.conf
Code
#################################################################################
# #
# The following configuration file is generated automatically by the yaVDR #
# system. Don't change this file as every update of yaVDR will overwrite #
# the local changes. Instead put your required customizations #
# into /etc/yavdr/templates_custom/ based on the original templates #
# under /usr/share/yavdr/templates. #
# #
# http://www.yavdr.org/developer-zone/template-overview/ #
# #
# #
#################################################################################
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Home-brew (16x50 UART compatible serial port)"
REMOTE_MODULES="lirc_dev lirc_serial"
REMOTE_DRIVER=""
REMOTE_DEVICE="/dev/lirc0"
REMOTE_LIRCD_CONF=""
REMOTE_LIRCD_ARGS=""
#Chosen IR Transmitter
TRANSMITTER="None"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""
#Enable lircd
START_LIRCD="true"
#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"
#Try to load appropriate kernel modules
LOAD_MODULES="true"
# Default configuration files for your hardware if any
LIRCMD_CONF=""
#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""/etc/lirc/lircd.conf
Code
# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.8.0pre4(serial) on Wed Jan 18 14:16:57 2006
#
# contributed by strike
#
# brand: lircd.conf
# model no. of remote control: Harmony 300 with KLS VDR 1.6
# devices being controlled by this remote: vdr with LIRC
#
begin remote
name harmony_kls_vdr_1.6
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 922 858
zero 922 858
plead 937
gap 116048
min_repeat 2
toggle_bit 2
begin codes
KEY_MUTE 0x12cd
KEY_VOLUMEUP 0x12d0
KEY_VOLUMEDOWN 0x12d1
KEY_CHANNELDOWN 0x12e1
KEY_CHANNELUP 0x12e0
KEY_PREVIOUS 0x12e2
KEY_UP 0x02c4
KEY_DOWN 0x02c5
KEY_LEFT 0x02c6
KEY_RIGHT 0x02c7
KEY_OK 0x02c8
KEY_MENU 0x02c9
KEY_ESC 0x02ca
KEY_EPG 0x02cb
KEY_INFO 0x02cc
KEY_STOP 0x12f6
KEY_BACK 0x12f0
KEY_NEXT 0x12f1
KEY_PLAY 0x12f5
KEY_RECORD 0x12f7
KEY_REWIND 0x12f2
KEY_FASTFORWARD 0x12f4
KEY_PAUSE 0x12f3
KEY_1 0x12c1
KEY_2 0x12c2
KEY_3 0x12c3
KEY_4 0x12c4
KEY_5 0x12c5
KEY_6 0x12c6
KEY_7 0x12c7
KEY_8 0x12c8
KEY_9 0x12c9
KEY_0 0x12c0
KEY_RED 0x02c0
KEY_GREEN 0x02c1
KEY_YELLOW 0x02c2
KEY_BLUE 0x02c3
KEY_CHANNEL 0x02d3
KEY_PVR 0x02ce
KEY_TIME 0x02cf
KEY_SETUP 0x02d0
KEY_PROG1 0x02f0
KEY_PROG2 0x02f1
KEY_PROG3 0x02f2
KEY_PROG4 0x02f3
KEY_AUDIO 0x02f4
KEY_VIDEO 0x02f5
KEY_IMAGES 0x02f6
KEY_FN 0x02f7
KEY_SCREEN 0x02f8
KEY_POWER2 0x12cb
KEY_MODE 0x02d1
KEY_SUBTITLE 0x02d2
end codes
end remote
</lirc@bartelmus.de>reboot
irw
Code
irw
connect: No such file or directory
status eventlircd
Code
status eventlircd
eventlircd stop/waitingstatus lircd
Code
lircd stop/waitingWarum wird da nichts gestartet?
Kann das mir der Umstellung/ausprobe des USB-Empfängers zu tun haben?
strike
