Hallo habe nun so ziemlich alles am laufen mit dem 0.40 yavdr. Nur der Power Button funktioniert noch nicht. Er wird zwar erkannt, aber offensichtlich vom vdr nicht entsprechend ausgewertet:
Ausgabe von cat /proc/bus/input/devices:
Code
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
Alles anzeigen
Auch die einzelnen Tastendrucke werden erkannt. Ausgabe von evtest /dev/input/event1:
Code
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x0 product 0x1 version 0x0
Input device name: "Power Button"
Supported events:
Event type 0 (Sync)
Event type 1 (Key)
Event code 116 (Power)
Testing ... (interrupt to exit)
Event: time 1322429081.953555, type 1 (Key), code 116 (Power), value 1
Event: time 1322429081.953565, -------------- Report Sync ------------
Event: time 1322429081.953585, type 1 (Key), code 116 (Power), value 0
Event: time 1322429081.953586, -------------- Report Sync ------------
Alles anzeigen
Aber wie gesagt reagiert vdr nicht darauf. Hat jemand einen Tipp?