Hallo,
bekomme hier bei einem yaVDRclient nicht hin, dass die Fernbedienung läuft. Im Webfrontend ist LIRC aktiviert und IgorUSB ausgewählt.
Die passende hardware.conf schaut wie folgt aus:
Code
cat /etc/lirc/hardware.conf
#################################################################################
# #
# The following configuration file is generated automatically by the yaVDR #
# system. Don't change this file as every update of yaVDR will overwrite #
# the local changes. Instead put your required customizations #
# into /etc/yavdr/templates_custom/ based on the original templates #
# under /usr/share/yavdr/templates. #
# #
# http://www.vdr-wiki.de/wiki/index.php/YaVDR-FAQ#Templating.2FCustomizing #
# #
# #
#################################################################################
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Igor Cesko's USB IR Receiver"
REMOTE_MODULES="lirc_dev lirc_igorplugusb"
REMOTE_DRIVER=""
REMOTE_DEVICE="/dev/lirc0"
REMOTE_LIRCD_CONF=""
REMOTE_LIRCD_ARGS=""
#Chosen IR Transmitter
TRANSMITTER="None"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""
#Enable lircd
START_LIRCD="true"
#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"
#Try to load appropriate kernel modules
LOAD_MODULES="true"
# Default configuration files for your hardware if any
LIRCMD_CONF=""
#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""
Alles anzeigen
Das remote-device /dev/lirc0 scheint aber nicht zu existieren oder aber erstellt zu werden:
Die passenden Module werden aber anscheinend geladen:
Dann noch das syslog:
Code
grep lirc /var/log/syslog
Feb 26 16:27:47 yaVDRclient2 kernel: [ 13.428687] lirc_dev: IR Remote Control driver registered, major 61
Feb 26 16:27:47 yaVDRclient2 kernel: [ 13.676663] lirc_igorplugusb: USB remote driver for LIRC v0.2
Feb 26 16:27:47 yaVDRclient2 kernel: [ 13.676667] lirc_igorplugusb: Jan M. Hochstein <hochstein@algo.informatik.tu-darmstadt.de>
Feb 26 16:27:47 yaVDRclient2 kernel: [ 13.676729] usbcore: registered new interface driver lirc_igorplugusb
Feb 26 16:27:47 yaVDRclient2 lircd-0.8.6[934]: lircd(default) ready, using /var/run/lirc/lircd
Feb 26 16:28:03 yaVDRclient2 lircd-0.8.6[934]: accepted new client on /var/run/lirc/lircd
Feb 26 16:28:03 yaVDRclient2 lircd-0.8.6[934]: could not get file information for /dev/lirc0
Feb 26 16:28:03 yaVDRclient2 lircd-0.8.6[934]: default_init(): No such file or directory
Feb 26 16:28:03 yaVDRclient2 lircd-0.8.6[934]: Failed to initialize hardware
Wo kann ich da den Hebel ansetzen? Vorab besten Dank für Eure Unterstützung!