Hallo Leute!
Mein yaVDR läuft - richtig gut! Vielen Dank!!
Aber: ich habe da noch ein Problem. Mein Mainboard hat zwei Monitoranschlüsse (DVI & VGA). Nun erkennt yaVDR aber leider nur den fernseher am DVI-Anschluss.
Direkt nach dem Neustart läuft alles auf beiden Bildschirmen (VGA & DVI) - Also Twinview. Aber sobald yaVDR betriebsbereit ist, wird nur noch auf dem Fernseher etwas ausgegeben.
Auch in der Webkonfiguration wird nur der Fernseher angezeigt.
Habt ihr eine Idee, was hier die Ursache für den Fehler sein könnte?
Gruß,
xsenon
Konfiguration:
Mainboard: Biostar GF7025-M2
CPU: AMD x2 3800
DVB: TT2300
ZitatAlles anzeigen* Ihr VDR
o Ihr VDR
o VDR-Frontend wählen
o VDR Konfigurations-Editor
o VDR-Shutdown wählen
o VDR-Lifeguard
o yaVDR-Pakete
o Kanäle
* System
o System
o Fernbedienung
o Ton
o GRUB Timeout
o Anzeige
o Wartung
o Netzwerk
o Web-Frontend
* Diagnose
o Diagnose
o System-Informationen
o System-Logfiles
o XBMC-Abstürze
o LIRC-Konfiguration
o VDR-Konfiguration
o X-Server
o Sound (ALSA)
o Pakete
o yaVDR-Utils
Willkommen im yaVDR Web-Frontend!
Konfigurieren Sie die Grundeinstellungen des Systems
Anzeige
Zwei-Bildschirm Betrieb:
deaktiviert (< 2 Bildschirme gefunden)
DISPLAY :1.0 (TOSHIBA-TV)
Gerät: DFP-0
aktuelle Auflösung: nvidia-auto-select 1920x1080
Auflösung:
primär:
Nvidia Overscan-Kompensation:
GraphTFT:
aktiviert
Xine-HD-Deinterlacer (Voreinstellung: bob):
Xine-SD-Deinterlacer (Voreinstellung: temporal):
Setze Anzeigeeinstellungen
Inhalte von wichtigen Logfiles und Konfigurationsdateien
* X-Server Configuration (only if NVIDIA VDPAU present) (/etc/X11/xorg.conf.yavdr)
* XSession.vdr (/etc/X11/Xsession.vdr)
* X-Server Logfile (/var/log/Xorg.1.log)
*
Aktualisieren
Ans Ende springen
#################################################################################
# #
# The following configuration file is generated automatically by the yaVDR #
# system. Don't change this file as every update of yaVDR will overwrite #
# the local changes. Instead put your required customizations #
# into /etc/yavdr/templates_custom/ based on the original templates #
# under /usr/share/yavdr/templates. #
# #
# http://www.vdr-wiki.de/wiki/in…#Templating.2FCustomizing #
# #
# #
#################################################################################
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Tue Oct 20 21:00:15 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
Option "ExactModeTimingsDVI" "True"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Screen 0
Option "DPI" "100x100"
BusID "PCI:0:18:0"
Option "NoLogo" "True"
Option "UseEvents" "True"
Option "TripleBuffer" "False"
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
Option "ConnectedMonitor" "DFP-0"
Option "UseDisplayDevice" "DFP-0"
Option "CustomEDID" "DFP-0:/etc/X11/edid.0.yavdr"
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
Anzeigeeinstellungen
Informieren Sie sich über die aktuelle X-Konfiguration