Problem mit 2 Karten und Client

  • Hallo,


    hab folgendes Problem unter yavdr 0.2.
    Ich kann auf dem Server normal Fernsehen schauen aber per vnsi
    nicht gleichzeitig mit dem Client. Das liegt wohl an der TT 3200 denn wenn Ich die Karte zusätzlich zu der Mystique Dual einstecke dann gehts eben nicht mehr. Hier noch mal ein Log dazu


    ep 30 19:55:35 TV vdr: [1285] VNSI: Client with ID 18 connected: 192.168.0.103:58562
    Sep 30 19:55:35 TV vdr: [1865] VNSI: Welcome client 'XBMC Live stream receiver' with protocol version '1'
    Sep 30 19:55:35 TV vdr: [1866] LNB 1: Request for channel 2 on device 0. MaxBadPriority is -2
    Sep 30 19:55:35 TV vdr: [1866] LNB 1: Request for channel 2 on device 0. MaxBadPriority is -2
    Sep 30 19:55:35 TV vdr: [1866] LNB 2: Request for channel 2 on device 1. MaxBadPriority is -2
    Sep 30 19:55:35 TV vdr: [1866] LNB 2: Request for channel 2 on device 1. MaxBadPriority is -2
    Sep 30 19:55:35 TV vdr: [1866] LNB 3: Request for channel 2 on device 2. MaxBadPriority is -2
    Sep 30 19:55:35 TV vdr: [1866] LNB 3: Request for channel 2 on device 2. MaxBadPriority is -2
    Sep 30 19:55:35 TV vdr: [1866] VNSI: Successfully found following device: 0xb5735ba8 (2) for receiving
    Sep 30 19:55:35 TV vdr: [1866] LNB 2: Request for channel 2 on device 1. MaxBadPriority is -2
    Sep 30 19:55:35 TV vdr: [1866] LNB 2: Device check for for channel 2 on device 1. OK
    Sep 30 19:55:35 TV vdr: [1866] LNB 2: Switching device 1 to channel 2
    Sep 30 19:55:35 TV vdr: [1866] VNSI: Creating new live Receiver
    Sep 30 19:55:35 TV vdr: [1866] VNSI: Successfully switched to channel 2 - ZDF
    Sep 30 19:55:35 TV vdr: [1866] VNSI: Started streaming of channel 2 - ZDF
    Sep 30 19:55:35 TV vdr: [1868] receiver on device 2 thread started (pid=942, tid=1868)
    Sep 30 19:55:35 TV vdr: [1869] TS buffer on device 2 thread started (pid=942, tid=1869)
    Sep 30 19:55:35 TV vdr: [1867] cLiveStreamer stream processor thread started (pid=942, tid=1867)
    Sep 30 19:55:38 TV vdr: [1866] VNSI-Error: cxSocket::read: read() error at 0/4
    Sep 30 19:55:38 TV vdr: [1257] frontend 1/1 timed out while tuning to channel 153, tp 112344
    Sep 30 19:55:38 TV vdr: [1867] cLiveStreamer stream processor thread ended (pid=942, tid=1867)
    Sep 30 19:55:38 TV vdr: [1866] buffer stats: 0 (0%) used
    Sep 30 19:55:38 TV vdr: [1869] TS buffer on device 2 thread ended (pid=942, tid=1869)
    Sep 30 19:55:39 TV vdr: [1868] buffer stats: 0 (0%) used
    Sep 30 19:55:39 TV vdr: [1868] receiver on device 2 thread ended (pid=942, tid=1868)
    Sep 30 19:55:40 TV vdr: [1285] VNSI: Client with ID 18 seems to be disconnected, removing from client list
    Sep 30 19:55:40 TV vdr: [1285] VNSI: cConnection::~cConnection()
    Sep 30 19:55:40 TV vdr: [1285] VNSI: stopping cConnection thread ...
    Sep 30 19:55:40 TV vdr: [1285] VNSI: done.


    Wäre toll wenn mir da jemand helfen könnte.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!