geloest: mediamvp & vompserver: "locating server"

linvdr:/etc/vdr# cat /tmp/vompserver.log
21:10:10.987839 [info]   Main - Logging started
21:10:10.988635 [debug]  UDP - UDP replier started
21:10:10.989182 [debug]  BOOTPD - Starting bootpd
21:10:10.989473 [debug]  BOOTPD - Starting wait
21:10:10.989624 [debug]  BOOTPD - Bootp replier started
21:10:10.989985 [info]   Main - TFTP path '/tftpboot/'
21:10:10.990074 [debug]  Tftpd - Starting TFTPd
21:10:10.990384 [debug]  Tftpd - Starting wait
21:10:10.990537 [debug]  Tftpd - TFTP server started with base path '/tftpboot/'
21:10:10.990987 [debug]  Main - MVPServer run success
22:50:43.670346 [debug]  BOOTPD - Wait finished
22:50:43.670545 [debug]  BOOTPD - Got request
22:50:43.670875 [debug]  Config - Opened config file: /etc/vdr/plugins/vomp-00-0D-FE-00-4E-90.conf
22:50:43.670970 [debug]  BOOTPD - Opened config file: /etc/vdr/plugins/vomp-00-0D-FE-00-4E-90.conf
22:50:43.741915 [debug]  Config - Config error: Key IP not found
22:50:43.742022 [WARN]   BOOTPD - No IP found for MVP. Hopefully it has one already...
22:50:43.742307 [debug]  Config - Config error: Key Override IP not found
22:50:43.742400 [debug]  BOOTPD - Will not change MVP IP if it already has one
22:50:43.742483 [debug]  BOOTPD - Leave YI=0 as MVP already has good IP
22:50:43.743029 [debug]  BOOTPD - Starting wait
22:50:43.873734 [debug]  Tftpd - Wait finished
22:50:43.873851 [debug]  TftpClient - Client handler started
22:50:43.874245 [debug]  Tftpd - Starting wait
22:50:43.874386 [debug]  TftpClient - RRQ received for dongle.bin
22:50:43.874530 [info]   TftpClient - File: '/tftpboot/dongle.bin'
22:50:49.095344 [info]   TftpClient - File transfer finished
22:50:49.095484 [info]   TftpClient - processMessage terminating connection
22:58:58.711097 [debug]  BOOTPD - Wait finished
22:58:58.711265 [debug]  BOOTPD - Got request
22:58:58.711494 [debug]  Config - Opened config file: /etc/vdr/plugins/vomp-00-0D-FE-00-4E-90.conf
22:58:58.711585 [debug]  BOOTPD - Opened config file: /etc/vdr/plugins/vomp-00-0D-FE-00-4E-90.conf
22:58:58.712024 [debug]  Config - Config error: Key IP not found
22:58:58.712122 [WARN]   BOOTPD - No IP found for MVP. Hopefully it has one already...
22:58:58.712401 [debug]  Config - Config error: Key Override IP not found
22:58:58.712495 [debug]  BOOTPD - Will not change MVP IP if it already has one
22:58:58.712578 [debug]  BOOTPD - Leave YI=0 as MVP already has good IP
22:58:58.713073 [debug]  BOOTPD - Starting wait
22:58:58.843305 [debug]  Tftpd - Wait finished
22:58:58.843434 [debug]  TftpClient - Client handler started
22:58:58.843822 [debug]  Tftpd - Starting wait
22:58:58.843998 [debug]  TftpClient - RRQ received for dongle.bin
22:58:58.844197 [info]   TftpClient - File: '/tftpboot/dongle.bin'
22:59:04.011407 [info]   TftpClient - File transfer finished
22:59:04.011545 [info]   TftpClient - processMessage terminating connection

[General]


## Specify a log file here to enable logging


Log file = /tmp/vompserver.log


## If you have more than one vompserver running you
## can enter a name here that will appear on the
## server select list on the MVP


Server name = linvdr


## Enable this to start the built in Bootp server
## Required to boot the MVP if you have not got a
## DHCP server that can tell the MVP its boot file
## name and server


Bootp server enabled = yes


## Enable this to start the built in TFTP server
## Required to boot the MVP if you have not got a
## TFTP server running elsewhere


TFTP server enabled = yes


## Base directory for TFTP server
## If you leave this blank the plugin config
## path will be used - i.e. where this file is


TFTP directory = /tftpboot

linvdr:/etc/vdr# cat plugins/vomp-00-0D-FE-00-4E-90.conf
[Boot]


## If you enable the bootp server in vomp.conf, you can specify
## an IP to give out to this MVP here.


# IP = 192.168.10.19


## If you have a router that gives out addresses but you want
## the above address forced to the MVP, set this:


# Override IP = 1


## A file name to send to the MVP. The MVP will then request
## this file from the TFTP server. Don't use a path here!


TFTP file name = dongle.bin


[General]
Live priority = 1
Power After Boot = Last state
Language = Deutsch
Remote type = Old
Last Power State = On


## The client auto-detects whether to use PAL or NTSC. If you
## want to force the other one, set it here. Beware of popping
## your TV with this one!


# Override Video Format = NTSC