Hi Folks,
habe gerade den neuen C't VDR installiert. Insgesammt läuft es stabil allerdings sind mir noch einige Dinge aufgefallen, die ich hier zusammenfassen will:
* vdr-addon-vdrconvert setzt wohl dvdrtools voraus. Dies ist allerdings nur im debian non-free Bereich zu finden. Deshalb wird das Paket mit der "standard" sources.list zurückgehalten.
* [FIXED: http://www.vdr-portal.de/board/thread.php?threadid=25352&sid=
nvram: in manchen Fällen funktioniert nvram nicht richtig. Ursache ist, dass im Kernel nvram Modul ein patch fehlt. Dieses Problem kann durch installation eins gepatchten nvram kernel modules beseitigt werden.
* [FIXED: http://www.vdr-portal.de/board/thread.php?threadid=25342&sid=] Da im Sarge Bereich teilweise neuere oder gleiche Versionen von Pakete vorhanden sind werden sie fälschlicherweise die C't-Pakete überschrieben.
Ein Eintrag in /etc/apt/preferences:
ZitatPackage: *
Pin: release a=testing
Pin-Priority: 101
Package: vdr*
Pin: release o=www.heise.de
Pin-Priority: 500
verhindert dies.
* Das Runterfahren des VDR funktioniert nicht mehr richtig.
Zitatappend = "apm=off noapic acpi=on"
in der /vdr/lilo.conf hilft hier weiter.
* [FIXED: http://www.vdr-portal.de/board/thread.php?threadid=25342&sid=] kernel-poweroff fehlt offenbar im online - repository? Download über tobi-Repository funktioniert allerdings.
* Bei der installation von vdrconvert wird das Paket mencoder nicht "mit installiert". Ohne dieses Paket gibt das System allerdings Fehlermeldungen zur Lokalisierung aus und bricht die Verarbeitung ab. mencoder sollte eine dependency für vdrconvert sein!
Siehe: http://www.vdrportal.de/board/thread.php?threadid=25458&sid=
* [FIXED:
http://www.vdr-portal.de/board/thread.php?threadid=25455&sid= ]
Ich habe eine USB-Tastatur im Einsatz das führt zu zwei Problemen:
- Beim booten von der Installations-CD muss vdr eingegeben werden. Die USB-Tastatur funktioniert allerdings erst wenn der Kernel geladen ist. Es wäre wünschenswert, wenn die installation nach z.B. 30 Sek. automatisch starten würde.
- Leider habe ich dieses Problem mit der Fernbedienung (vdr remote plugin):
ZitatAlles anzeigenQ6: Keys are duplicated, i.e. pressing '1' switches to channel '11' or '111'.
A6: Try this: Switch to a different virtual console.
If the problem disappeares, read on.
When loaded, the keybdev device driver catches all remote control events.
vdr receives these events from the keyboard _and_ the remote plugin.
There are different solutions for kernel versions 2.4.x and 2.6.x.
Fix for kernel 2.4:
- If you don't use an USB keyboard, remove the keybdev driver:
rmmod keybdev, rename/delete keybdev.o
- If you have an USB keyboard, patch the keybdev driver using
misc/kernel-2.4-keybdev-patch.diff
and recompile the driver.
Fix for kernel 2.6 (already included in remote plugin 0.2.1 and later):
The keybdev driver is no longer optional. All keyboards use this driver.
Fortunately, there is a new ioctl to grab an input device in 2.6.x.
Patch the remote plugin using
http://www.escape-edv.de/endri…rnel-2.6_grab_device.diff
and recompile the plugin.
Der Kernel Patch der hier erwähnt wird ist offenbar nicht im vdr-Kernel enthalten.
* FIXED auf der Homepage zum VDR 3 wird jigdo beschrieben:
http://www.heise.de/ct/ftp/projekte/vdr3/jigdohowto.shtml
ZitatAuf einem Debian-System können Sie den nötigen Teil von jigdo einfach mit apt-get install jigdo-lite installieren.
Offenbar heist das debian Paket allerdings "jigdo-file".
Grüße,
Thomas