3. Karte eingebaut aber wird nicht erkannt?

Hallo,
ich hab hier einen vdr server (gentoo) laufen in dem hatte ich die ganze zeit 2 Nova plus-s karten und das hat auch alles gut geklappt jetzt hab ich mir eine 3. geholt aber er erkennt diese nicht, ich weis nichtmehr wie ich das damals bei der 2. gemacht hab deswegen hoffe ich könnt ihr mir helfen denn ich hab nur /dev/dvd/adapter0/ und adapter1
könnt ihr mir sagen was ich vergessen hab?

hier mal en paar ausgaben:

Zitat

00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:08.0 VGA compatible controller: S3 Inc. Savage 4 (rev 04)
00:09.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 02)
00:0a.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
00:0a.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
00:0a.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
00:0a.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
00:0b.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
00:0b.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
00:0b.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
00:0b.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
00:0c.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
00:0c.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
00:0c.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
00:0c.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 18)
00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 18)
00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 18)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 10)

Alles anzeigen

Zitat

Linux-G ~ # dmesg | grep Haupp
cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected]
tveeprom 1-0050: Hauppauge model 92001, rev B1B1, serial# 246581
input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input0
cx88[1]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected]
tveeprom 2-0050: Hauppauge model 92001, rev B1B1, serial# 247911
input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input1
cx88[2]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected]
tveeprom 3-0050: Hauppauge model 92001, rev B2B1, serial# 761483
input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input2
cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37]
cx88[1]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37]
cx88[2]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37]

Alles anzeigen

Zitat

Linux-G ~ # lsmod
Module Size Used by
it87 16912 0
hwmon_vid 2880 1 it87
hwmon 2372 1 it87
i2c_isa 3136 1 it87
eeprom 5712 0
rtc 10008 0
isl6421 1344 2
cx24123 9800 2
cx88_dvb 10116 20
cx88_vp3054_i2c 1664 1 cx88_dvb
cx8802 12292 1 cx88_dvb
videobuf_dvb 3780 1 cx88_dvb
dvb_core 59356 1 videobuf_dvb
evdev 7808 0
cx8800 24468 0
cx88xx 51560 3 cx88_dvb,cx8802,cx8800
ir_common 26052 1 cx88xx
i2c_algo_bit 5444 2 cx88_vp3054_i2c,cx88xx
tveeprom 12560 1 cx88xx
videodev 24576 2 cx8800,cx88xx
v4l1_compat 13124 1 videodev
compat_ioctl32 832 1 cx8800
v4l2_common 12928 3 cx8800,cx88xx,videodev
videobuf_dma_sg 8452 5 cx88_dvb,cx8802,videobuf_dvb,cx8800,cx88xx
videobuf_core 12228 5 cx8802,videobuf_dvb,cx8800,cx88xx,videobuf_dma_sg
btcx_risc 3016 3 cx8802,cx8800,cx88xx

Alles anzeigen

Zitat

dmesg:
tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=92001
input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input0
cx88[0]/0: found at 0000:00:0a.0, rev: 5, irq: 5, latency: 32, mmio: 0xdd000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
cx88[1]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected]
cx88[1]: TV tuner type 4, Radio tuner type -1
tveeprom 2-0050: Hauppauge model 92001, rev B1B1, serial# 247911
tveeprom 2-0050: MAC address is 00-0D-FE-03-C8-67
tveeprom 2-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
tveeprom 2-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 2-0050: audio processor is CX883 (idx 32)
tveeprom 2-0050: decoder processor is CX883 (idx 22)
tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter
cx88[1]: hauppauge eeprom: model=92001
input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input1
cx88[1]/0: found at 0000:00:0b.0, rev: 5, irq: 11, latency: 32, mmio: 0xe1000000
cx88[1]/0: registered device video1 [v4l2]
cx88[1]/0: registered device vbi1
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12
cx88[2]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected]
cx88[2]: TV tuner type 4, Radio tuner type -1
cx88[2]: hauppauge eeprom: model=92001
input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input2
cx88[2]/0: found at 0000:00:0c.0, rev: 5, irq: 12, latency: 32, mmio: 0xe5000000
cx88[2]/0: registered device video2 [v4l2]
cx88[2]/0: registered device vbi2
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:00:0a.2[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
cx88[0]/2: found at 0000:00:0a.2, rev: 5, irq: 5, latency: 32, mmio: 0xdf000000
cx88[1]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:00:0b.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
cx88[1]/2: found at 0000:00:0b.2, rev: 5, irq: 11, latency: 32, mmio: 0xe3000000
cx88[2]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:00:0c.2[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12
cx88[2]/2: found at 0000:00:0c.2, rev: 5, irq: 12, latency: 32, mmio: 0xe7000000
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37]
cx88[0]/2: cx2388x based DVB/ATSC card
DVB: registering new adapter (cx88[0])
DVB: registering frontend 0 (Conexant CX24123/CX24109)...
cx88[1]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37]
cx88[1]/2: cx2388x based DVB/ATSC card
DVB: registering new adapter (cx88[1])
DVB: registering frontend 1 (Conexant CX24123/CX24109)...
cx88[2]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37]
cx88[2]/2: cx2388x based DVB/ATSC card
DVB: registering new adapter (cx88[2])
DVB: registering frontend 2 (Conexant CX24123/CX24109)...
allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
cx88[2]: dvb_dmx_init failed (errno = -12)
cx88[2]/2: dvb_register failed (err = -12)
cx88[2]/2: cx8802 probe failed, err = -12

Alles anzeigen

edit: hab auch schon dieses script aus dem forum getestet aber dann hab ich 4 karten aber geht trozdem net:

Zitat

#!/bin/sh
rm -rf /dev/dvb/adapter*/*
device=0
for card in `seq 0 3`; do
mkdir -p /dev/dvb/adapter${card}
device=`echo $card \* 64 | bc`
for dev in video audio sec frontend demux dvr ca net osd; do
mknod /dev/dvb/adapter${card}/${dev}0 c 212 $device
chmod 0660 /dev/dvb/adapter${card}/${dev}0
chown root:video /dev/dvb/adapter${card}/${dev}0
let device=device+1
done
done

Alles anzeigen

hm welchen speicher meinst du damit? also sind mit der karte jetzt alle pci slots belegt.

Hallo,
also High Memory Support is an und genug ram soltle der rechner auch haben
Linux-G / # free
total used free shared buffers cached
Mem: 1294456 674148 620308 0 187056 324416
-/+ buffers/cache: 162676 1131780
Swap: 955856 0 955856

werd das mit dem vmalloc mal testen.

hallo,
also hab das problem behoben
VmallocTotal: 114680 kB
VmallocUsed: 114504 kB
VmallocChunk: 128 kB

hab jetzt vmalloc=512m als bootparameter rein.
VmallocTotal: 507896 kB
VmallocUsed: 116684 kB
VmallocChunk: 391168 kB

jetzt laufen alle auf anhieb.
gruß
bacardi