Hallo,
nach ewigem rumprobieren habe ich meinen Frits WLAN USBStick nun endlich zum Laufen bekommen.
Leider nur wenn ich alles manuell eingebe.
Meine config sieht folgendermaßen aus:
# more /etc/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=2
eapol_version=1
fast_reauth=1
network={
ssid="FRITZ!Box Fon WLAN 7170"
key_mgmt=WPA-PSK
proto=WPA
pairwise=TKIP
group=TKIP
psk="xxxxxxxxxxxxxxxx"
#psk=xxxxxxxxxxxxxxxxxxxxxxxxxxx
}
# more /etc/network/interface
This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# This is a list of hotpluggable network interfaces.
# They will be activated automatically by the hotplug subsystem.
#mapping eth0
# script grep
# map eth0
# The primary network interface
#allow-hotplug eth0
#iface eth0 inet dhcp
auto wlan0
iface wlan0 inet static
address 192.168.178.25
netmask 255.255.255.0
gateway 192.168.178.1
post-up /usr/sbin/wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant.conf -Bw
#post-up sleep
post-down killall wpa_supplicant
post-down rm -r /var/run/wpa_supplicant
# more /etc/default/wpasupplicant
# /etc/default/wpasupplicant
# WARNING! Make sure you have a configuration file!
ENABLED=1
# Useful flags:
# -D <driver> Wireless Driver
# -i <ifname> Interface (required, unless specified in config)
# -c <config file> Configuration file
# -d Debugging (-dd for more)
# -w Wait for interface to come up
OPTIONS="-i wlan0 -D wext -c /etc/wpahttp://lists.eit21.de/pipermail/bglug/2006-March/000139.html_supplicant.conf i-dd -w"
Nach dem booten kommt das WLAN leider nicht alleine hoch.
Nach depmod -a, modprobe ndiswrapper und
ifconfig wlan0 inet xxxx netmask xxx up
route add default gw xxxx
läuft es wieder.
Irgend etwas läuft falsch in den Startscripts.
Kann mir jemand helfen?
Gruss
hsp