Hallo zusammen,
ich habe ein großes problem mit meinem neuen VDR.
Von 10 Neustarts ist die ca. die Hälfte unbrauchbar. Man sieht bei HD Sendern ein lila flackerndes Bild, bzw. ein völlig kaputtes (siehe Anhänge). Bei SD Sendern bleibt der Bildschirm meistens schwarz.
Das OSD wird allerdings korrekt angezeigt. Nach einem Neustart ist das Bild dann stabil und sauber, Klötzenbildung ist auch über längeren Zeitraum nicht feststellbar.
Die Femon Anzeige beim dem flackernden Bild unterscheidet sich nicht von der guten Anzeige.
System:
Asrock Q1900M
Nvidia GT 630 Zone Edition Gk208
DVBSky S952 v3
yavdr 0.5
Kernel 3.13.0-37
nvidia-331
relevante Logs:
---
Oct 26 13:47:55 vdr kernel: [ 10.334452] DVBSky SMI PCIe driver 0000:01:00.0: DVB: registering adapt
er 0 frontend 0 (Montage RS6000(DVBSky))...
Oct 26 13:47:55 vdr acpid: starting up with netlink and the input layer
Oct 26 13:47:55 vdr kernel: [ 10.349950] DVBSky PCIe MAC= 00:18:42:54:55:52
Oct 26 13:47:55 vdr kernel: [ 10.350060] DVB: registering new adapter (SMI_DVB)
Oct 26 13:47:55 vdr acpid: 35 rules loaded
Oct 26 13:47:55 vdr acpid: waiting for events: event logging is off
Oct 26 13:47:55 vdr kernel: [ 10.439664] RS6000 chip, demod id=e8, version=a1.
Oct 26 13:47:55 vdr kernel: [ 10.445224] RS6000 chip, tuner id=64.
Oct 26 13:47:56 vdr kernel: [ 10.692541] m88rs6000_load_firmware: Waiting for firmware upload (dvb-f
e-rs6000.fw)...
Oct 26 13:47:56 vdr kernel: [ 10.692586] m88rs6000_load_firmware: Waiting for firmware upload(2)...
Oct 26 13:47:59 vdr ntpdate[1439]: step time server 91.189.94.4 offset -1.124933 sec
Oct 26 13:48:01 vdr kernel: [ 17.024812] DVBSky SMI PCIe driver 0000:01:00.0: DVB: registering adapt
er 1 frontend 0 (Montage RS6000(DVBSky))...
Oct 26 13:48:01 vdr kernel: [ 17.040526] DVBSky PCIe MAC= 00:18:32:54:55:53
Oct 26 13:48:01 vdr kernel: [ 17.069521] Registered IR keymap rc-dvbsky
Oct 26 13:48:01 vdr kernel: [ 17.069709] input: IR (DVBSky S952 V3) as /devices/pci0000:00/0000:00:1
c.0/0000:01:00.0/rc/rc1/input20
Oct 26 13:48:01 vdr kernel: [ 17.070214] rc1: IR (DVBSky S952 V3) as /devices/pci0000:00/0000:00:1c.
0/0000:01:00.0/rc/rc1
Oct 26 13:48:01 vdr kernel: [ 17.070343] DVBSky SMI PCIe driver 0000:01:00.0: irq 108 for MSI/MSI-X
Oct 26 13:48:01 vdr vdr: [1904] VDR version 2.0.6 started
---
Oct 26 13:48:02 vdr vdr: [1904] dynamite: probing /dev/dvb/adapter0/frontend0
Oct 26 13:48:02 vdr vdr: [1904] dynamite: probing /dev/dvb/adapter1/frontend0
Oct 26 13:48:02 vdr vdr: [1904] dynamite: /dev/dvb/adapter0/frontend0 is a dvb adapter trying to set c
ard index to 0
Oct 26 13:48:02 vdr vdr: [1904] new sub-device number 1
Oct 26 13:48:02 vdr vdr: [1904] DVB API version is 0x050A (VDR was built with 0x0504)
Oct 26 13:48:02 vdr vdr: [1904] frontend 0/0 provides DVB-S,DVB-S2 with QPSK ("Montage RS6000(DVBSky)"
)
Oct 26 13:48:02 vdr vdr: [1904] dynamite: attached device /dev/dvb/adapter0/frontend0 to dynamic devic
e slot 1
Oct 26 13:48:02 vdr vdr: [1904] dynamite: /dev/dvb/adapter1/frontend0 is a dvb adapter trying to set c
ard index to 1
Oct 26 13:48:02 vdr vdr: [1904] new sub-device number 2
Oct 26 13:48:02 vdr vdr: [1976] tuner on frontend 0/0 thread started (pid=1904, tid=1976, prio=high)
Oct 26 13:48:02 vdr vdr: [1977] section handler thread started (pid=1904, tid=1977, prio=low)
Oct 26 13:48:02 vdr vdr: [1904] frontend 1/0 provides DVB-S,DVB-S2 with QPSK ("Montage RS6000(DVBSky)"
)
Oct 26 13:48:02 vdr vdr: [1979] tuner on frontend 1/0 thread started (pid=1904, tid=1979, prio=high)
Oct 26 13:48:02 vdr vdr: [1904] dynamite: attached device /dev/dvb/adapter1/frontend0 to dynamic devic
e slot 2
Oct 26 13:48:02 vdr vdr: [1980] section handler thread started (pid=1904, tid=1980, prio=low)
Oct 26 13:48:02 vdr vdr: [1904] dynamite: /dev/dvb/adapter0/frontend0 is a dvb adapter trying to set c
ard index to 0
Oct 26 13:48:02 vdr vdr: [1904] dynamite: /dev/dvb/adapter0/frontend0 is already attached
Oct 26 13:48:02 vdr vdr: [1904] dynamite: /dev/dvb/adapter1/frontend0 is a dvb adapter trying to set c
ard index to 1
Oct 26 13:48:02 vdr vdr: [1904] dynamite: /dev/dvb/adapter1/frontend0 is already attached
Oct 26 13:48:02 vdr vdr: [1904] setting primary device to 10
---
Oct 26 13:48:07 vdr rsyslogd-2177: imuxsock lost 76 messages from pid 1904 due to rate-limiting
Oct 26 13:48:07 vdr vdr: [1983] XVDR: Recordings state changed (169)
Oct 26 13:48:07 vdr vdr: [1971] video directory scanner thread ended (pid=1904, tid=1971)
Oct 26 13:48:07 vdr vdr: [1983] XVDR: Recordings state changed (195)
Oct 26 13:48:07 vdr vdr: [1970] video directory scanner thread ended (pid=1904, tid=1970)
Oct 26 13:48:07 vdr vdr: [1983] XVDR: Recordings state changed (203)
Oct 26 13:48:09 vdr vdr: [1983] XVDR: Starting garbage collection in recordings cache
Oct 26 13:48:11 vdr vdr: video/vdpau: out of surfaces
Oct 26 13:48:11 vdr vdr: audio/alsa: using device 'default'
Oct 26 13:48:11 vdr vdr: audio/alsa: start delay 336ms
Oct 26 13:48:11 vdr vdr: video/vdpau: release surface 0xffffffff, which is not in use
Oct 26 13:48:11 vdr vdr: video/vdpau: out of surfaces
Oct 26 13:48:11 vdr vdr: video/vdpau: decoder rendering failed: An invalid handle value was provided.
Any hints ?
Schonmal vielen Dank
Markus