Hallo zusammen,
hat jemand von euch die Mahlzeit 3.2 mit zwei PVR350 karten am laufen?
Falls ja, beschreibt mal bitte wie ihr das hinbekommen habt.
Sobald ich meine zweite Karte einsetze fährt der VDR nicht mehr hoch...
Gruß
forces1de
Hallo zusammen,
hat jemand von euch die Mahlzeit 3.2 mit zwei PVR350 karten am laufen?
Falls ja, beschreibt mal bitte wie ihr das hinbekommen habt.
Sobald ich meine zweite Karte einsetze fährt der VDR nicht mehr hoch...
Gruß
forces1de
das sollte eigentlich möglich sein, auch wenn ich es noch nie probiert habe.
fährt der ganze rechner nciht mehr hoch, oder hakt es nur beim vdr-Start (runvdr)?
kommentier mal den Aufruf der runvdr in der /etc/init.d/rcStart aus. Nach Reboot dann in /etc/vdr/setup.conf den loglevel für pvr350 auf 3 und für pvrinput auf 4 stellen.
Anschließend startest Du vdr manuell von der Konsole:
modprobe ivtvfb
vdr -c /etc/vdr -L /usr/lib/vdr/plugins -v /video0 -Ppvr350 -Ppvrinput
jetzt ist interessant, was auf der Konsole geloggt wird
Hallo Dr.,
also ich habe beide Karten drin dann führe ich das aus was du sagtest und dann folgt der Log, danach wird die Puttyverbindung gekappt und der VDR reagiert nicht auf die FB um ihn aus zu schalten.
In der setup.conf gibbet keine Einstellung für pvrinput loglevel
meine setup.conf:
AudioLanguages =
Card1usesLNBnr = 1
Card2usesLNBnr = 2
ChannelInfoPos = 0
ChannelInfoTime = 5
CurrentChannel = 9
CurrentDolby = 0
CurrentVolume = 255
CutterAutoDelete = 0
DefaultLifetime = 99
DefaultPriority = 50
DisableVPS = 0
DiSEqC = 0
DolbyTransferFix = 0
DoubleEpgAction = 0
DoubleEpgTimeDelta = 15
DvdDisplayMode = 1
DvdDisplayZeros = 1
DvdSpeedLimit = 0
DvdTrayMode = 0
EPGBugfixLevel = 3
EPGLanguages =
EPGLinger = 0
EPGScanTimeout = 5
ExtendBuffer = 0
HardLinkCutter = 0
InitialChannel = 0
InitialVolume = -1
InRAM = 0
InstantRecordTime = 180
JumpPlay = 0
JumpSeconds = 60
JumpSecondsSlow = 10
KeepPaused = 0
LiveBuffer = 0
LiveBufferSize = 100
LnbFrequHi = 10600
LnbFrequLo = 9750
LnbSLOF = 11700
LRChannelGroups = 1
LRForwardRewind = 1
LRVolumeControl = 0
MarginStart = 2
MarginStop = 10
MarkInstantRecord = 1
MaxRecordingSize = 100
MaxVideoFileSize = 2000
MemBufSize = 5
MenuButtonCloses = 0
MenuCmdPosition = 0
MenuScrollPage = 1
MenuScrollWrap = 0
MinEventTimeout = 30
MinUserInactivity = 20
MixEpgAction = 0
MultiSpeedMode = 1
NameInstantRecord = TITLE EPISODE
noEPGList =
noEPGMode = 0
NoQamOnDecoder = 0
nVidPrefer = 1
OSDHeight = 486
OSDLanguage = 1
OSDLeft = 54
OSDMessageTime = 1
OSDSkin = sttng
OSDTheme = default
OSDTop = 45
OSDWidth = 624
PauseLastMark = 0
PauseLifetime = 1
PausePriority = 10
PlayJump = 0
PrimaryDVB = 1
PrimaryLimit = 0
RecordingDirs = 1
RecordingsSortDirsFirst = 0
RecordingsSortMode = 0
ReloadMarks = 0
ResumeID = 0
SetSystemTime = 0
ShowInfoOnChSwitch = 1
ShowProgressBar = 0
ShowRecDate = 1
ShowRecFree = 0
ShowRecLength = 0
ShowRecTime = 1
ShowReplayMode = 1
ShowTimerStop = 1
ShowValidInput = 0
SplitEditedFiles = 0
SVDRPTimeout = 300
TimeoutRequChInfo = 1
TimeSource = 0
TimeTransponder = 0
ttng = 0
TurnOffPrimary = 0
UpdateChannels = 5
UseDolbyDigital = 1
UseDolbyInRecordings = 1
UseFriendlyFNames = 0
UseSmallFont = 1
UseSubtitle = 1
UseSyncEarlyPatch = 0
UseVidPrefer = 0
UseVps = 0
VerboseLNBlog = 0
VideoDisplayFormat = 1
VideoFormat = 0
VidPreferPrio0 = 50
VidPreferSize0 = 800
VpsMargin = 120
WarEagleIcons = 1
ZapTimeout = 3
Á€€€ = default
burn.ChaptersMode = 3
burn.CreateArchiveMarks = 0
burn.DiskType = 0
burn.DVDSize = 4332
burn.HidePathInfo = 1
burn.RenderRecordingIndex = 0
burn.StoreMode = 1
burn.UseIso2UTF = 1
burn.VerifyAfterBurn = 0
pvr350.AC3Gain = 1
pvr350.DeviceNumber = 16
pvr350.LogLevel = 3
pvr350.UseWssBits = 0
pvr350.WSS_16:9_for_pmExtern = 0
vdrc.DefPathPanel0 = /
vdrc.DefPathPanel1 = /
Hier folgt der Log:
linvdr:~# modprobe ivtvfb
linvdr:~# vdr -c /etc/vdr -L /usr/lib/vdr/plugins -v /video0 -Ppvr350 -Ppvrinput pvr350: 20:38:07 pvr350: IVTV version=0x010200 found
pvr350: 20:38:07 cPvr350Device::OpenV4L2()
pvr350: 20:38:07 cPvr350Device::OpenV4L2() 0 16 0 ff
pvr350: 20:38:07 cPvr350Device::SetVideoSize(x=0,y=0,w=720,d=576)
pvr350: 20:38:07 cPvr350Device::Kernelversion=2.6.23.9
pvr350: 20:38:07 cPvr350Device::MakePrimaryDevice(true)
pvr350: 20:38:07 cPvr350Device::SetVideoFormat(VideoFormat16_9=false)
pvrinput: 20:38:07 cPvrDevice::Probe():found Hauppauge WinTV PVR-350
pvrinput: 20:38:07 /dev/video0 = Hauppauge WinTV PVR-350
pvrinput: 20:38:07 BusID = 0000:01:05.0
pvrinput: 20:38:07 ivtv Version 0x010200
pvrinput: 20:38:07 /dev/radio0 = FM radio dev
pvrinput: 20:38:07 QueryAllControls
pvrinput: 20:38:07 input 0 = Tuner 1
pvrinput: 20:38:07 input 1 = S-Video 1
pvrinput: 20:38:07 input 2 = Composite 1
pvrinput: 20:38:07 input 3 = S-Video 2
pvrinput: 20:38:07 input 4 = Composite 2
pvrinput: 20:38:07 input 5 = Composite 3
pvrinput: 20:38:07 cPvrDevice::SetInput to 0
pvrinput: 20:38:07 SetControlValue(Stream Type, 0)
pvrinput: 20:38:07 SetControlValue(Audio Encoding Layer, 1)
pvrinput: 20:38:07 SetControlValue(Video Peak Bitrate, 15000000)
pvrinput: 20:38:07 cPvrDevice::SetVideoSize
pvrinput: 20:38:07 SetVideoNorm(PAL)
pvrinput: 20:38:07 SetVBImode(PAL, 1)
pvrinput: 20:38:07 cPvrDevice::ReInit
pvrinput: 20:38:07 cPvrDevice::SetTunerAudioMode(bilingual)
pvrinput: 20:38:07 SetControlValue(Video Aspect, 1)
pvrinput: 20:38:07 SetControlValue(Audio Layer II Bitrate, 10)
pvrinput: 20:38:07 SetControlValue(Audio Sampling Frequency, 1)
pvrinput: 20:38:07 SetControlValue(Video Bitrate, 6000000)
pvrinput: 20:38:07 SetControlValue(Video Bitrate Mode, 0)
pvrinput: 20:38:07 SetControlValue(Video GOP Size, 12)
pvrinput: 20:38:07 SetControlValue(Video GOP Closure, 1)
pvrinput: 20:38:07 SetControlValue(Video B Frames, 2)
pvrinput: 20:38:07 SetControlValue(Spatial Filter Mode, 0)
pvrinput: 20:38:07 SetControlValue(Spatial Filter, 0)
pvrinput: 20:38:07 SetControlValue(Spatial Luma Filter Type, 0)
pvrinput: 20:38:07 SetControlValue(Spatial Chroma Filter Type, 0)
pvrinput: 20:38:07 SetControlValue(Temporal Filter Mode, 0)
pvrinput: 20:38:07 SetControlValue(Temporal Filter, 0)
pvrinput: 20:38:07 SetControlValue(Median Filter Type, 0)
pvrinput: 20:38:07 SetControlValue(Median Luma Filter Minimum, 0)
pvrinput: 20:38:07 SetControlValue(Median Luma Filter Maximum, 255)
pvrinput: 20:38:07 SetControlValue(Median Chroma Filter Minimum, 0)
pvrinput: 20:38:07 SetControlValue(Median Chroma Filter Maximum, 255)
pvrinput: 20:38:07 SetControlValue(Brightness, 128)
pvrinput: 20:38:07 SetControlValue(Contrast, 64)
pvrinput: 20:38:07 SetControlValue(Saturation, 64)
pvrinput: 20:38:07 SetControlValue(Hue, 0)
pvrinput: 20:38:07 SetControlValue(Volume, 62258)
pvrinput: 20:38:07 SetControlValue(Mute, 0)
pvrinput: 20:38:07 SetControlValue(Video Bitrate, 6000000)
pvrinput: 20:38:07 cPvrReadThread
pvrinput: 20:38:07 cPvrReadThread::Action(): Entering Action()
pvrinput: 20:38:07 cPvrDevice::Probe():found Hauppauge WinTV PVR-350
pvrinput: 20:38:07 /dev/video1 = Hauppauge WinTV PVR-350
pvrinput: 20:38:07 BusID = 0000:01:09.0
pvrinput: 20:38:07 ivtv Version 0x010200
pvrinput: 20:38:08 QueryAllControls
pvrinput: 20:38:08 input 0 = Tuner 1
pvrinput: 20:38:08 input 1 = S-Video 1
pvrinput: 20:38:08 input 2 = Composite 1
pvrinput: 20:38:08 input 3 = S-Video 2
pvrinput: 20:38:08 input 4 = Composite 2
pvrinput: 20:38:08 input 5 = Composite 3
pvrinput: 20:38:08 cPvrDevice::SetInput to 0
pvrinput: 20:38:08 SetControlValue(Stream Type, 0)
pvrinput: 20:38:08 SetControlValue(Audio Encoding Layer, 1)
pvrinput: 20:38:08 SetControlValue(Video Peak Bitrate, 15000000)
pvrinput: 20:38:08 cPvrDevice::SetVideoSize
pvrinput: 20:38:08 SetVideoNorm(PAL)
pvrinput: 20:38:08 SetVBImode(PAL, 1)
pvrinput: 20:38:08 cPvrDevice::ReInit
pvrinput: 20:38:08 cPvrDevice::SetTunerAudioMode(bilingual)
pvrinput: 20:38:08 SetControlValue(Video Aspect, 1)
pvrinput: 20:38:08 SetControlValue(Audio Layer II Bitrate, 10)
pvrinput: 20:38:08 SetControlValue(Audio Sampling Frequency, 1)
pvrinput: 20:38:08 SetControlValue(Video Bitrate, 6000000)
pvrinput: 20:38:08 SetControlValue(Video Bitrate Mode, 0)
pvrinput: 20:38:08 SetControlValue(Video GOP Size, 12)
pvrinput: 20:38:08 SetControlValue(Video GOP Closure, 1)
pvrinput: 20:38:08 SetControlValue(Video B Frames, 2)
pvrinput: 20:38:08 SetControlValue(Spatial Filter Mode, 0)
pvrinput: 20:38:08 SetControlValue(Spatial Filter, 0)
pvrinput: 20:38:08 SetControlValue(Spatial Luma Filter Type, 0)
pvrinput: 20:38:08 SetControlValue(Spatial Chroma Filter Type, 0)
pvrinput: 20:38:08 SetControlValue(Temporal Filter Mode, 0)
pvrinput: 20:38:08 SetControlValue(Temporal Filter, 0)
pvrinput: 20:38:08 SetControlValue(Median Filter Type, 0)
pvrinput: 20:38:08 SetControlValue(Median Luma Filter Minimum, 0)
pvrinput: 20:38:08 SetControlValue(Median Luma Filter Maximum, 255)
pvrinput: 20:38:08 SetControlValue(Median Chroma Filter Minimum, 0)
pvrinput: 20:38:08 SetControlValue(Median Chroma Filter Maximum, 255)
pvrinput: 20:38:08 SetControlValue(Brightness, 128)
pvrinput: 20:38:08 SetControlValue(Contrast, 64)
pvrinput: 20:38:08 SetControlValue(Saturation, 64)
pvrinput: 20:38:08 SetControlValue(Hue, 0)
pvrinput: 20:38:08 SetControlValue(Volume, 62258)
pvrinput: 20:38:08 SetControlValue(Mute, 0)
pvrinput: 20:38:08 SetControlValue(Video Bitrate, 6000000)
pvrinput: 20:38:08 cPvrReadThread
pvrinput: 20:38:08 cPvrReadThread::Action(): Entering Action()
pvrinput: 20:38:09 cPvrDevice::Initialize(): found 2 PVR devices
pvrinput: 20:38:09 cPvrDevice::ParseChannel: using old channel syntax.
pvrinput: 20:38:09 cPvrDevice::ProvidesChannel: /dev/video0: Channel 9 (Kabel1) 266.25MHz, -> true
pvrinput: 20:38:09 cPvrDevice::ParseChannel: using old channel syntax.
pvrinput: 20:38:09 cPvrDevice::ProvidesChannel: /dev/video1: Channel 9 (Kabel1) 266.25MHz, -> true
pvrinput: 20:38:09 cPvrDevice::SetChannelDevice 9 (Kabel1) 266.25MHz (/dev/video0 = ivtv)
pvrinput: 20:38:09 cPvrDevice::ParseChannel: using old channel syntax.
pvrinput: 20:38:11 cPvrDevice::SetEncoderState (Stop)
pvrinput: 20:38:11 cPvrDevice::Tune(): Frequency set to 266.25 MHz (4260)
pvrinput: 20:38:11 cPvrDevice::SetEncoderState (Start)
pvrinput: 20:38:11 cPvrReadThread
pvr350: 20:38:11 cPvr350Device::SetAudioChannelDevice (stereo)
pvrinput: 20:38:11 cPvrReadThread::Action(): Entering Action()
pvrinput: 20:38:11 cPvrDevice::OpenDvr
pvr350: 20:38:12 cPvr350Device::SetPlayMode() (pmAudioVideo)
pvr350: 20:38:12 cPvr350Device::Start_Decode()
pvr350: 20:38:20 cPvr350Device::Set_wss_mode()
pvr350: 20:38:20 pvr350: Trying size set (4:3): 720x576 0x0
Das ist alles und dann reist die Verbindung ab....
Und nu ist erst ma Ratlosigkeit bei mir angesagt.
ZitatOriginal von forces1de
In der setup.conf gibbet keine Einstellung für pvrinput loglevel
trag manuell
pvrinput.LogLevel = 4
am Ende ein.
ZitatCodepvr350: 20:38:11 cPvr350Device::SetAudioChannelDevice (stereo) pvrinput: 20:38:11 cPvrReadThread::Action(): Entering Action() pvrinput: 20:38:11 cPvrDevice::OpenDvr pvr350: 20:38:12 cPvr350Device::SetPlayMode() (pmAudioVideo) pvr350: 20:38:12 cPvr350Device::Start_Decode() pvr350: 20:38:20 cPvr350Device::Set_wss_mode() pvr350: 20:38:20 pvr350: Trying size set (4:3): 720x576 0x0
Das ist alles und dann reist die Verbindung ab....
probier auch mal ohne "-Ppvrinput". Dann gibt es zwar keine Kanäle, abe rmal sehen ob das pvr350-Plugin üerhaupt durchstartet. Ich glaube nämlich, dass da der Hase im Pfeffer liegt. Möglicherweise ist das erste gefundene Dekoder device /dev/video16 von Karte A, aber das erste gefundene framebuffer device das von Karte B. So ein Problem gab es schon mal, und ich glaube es gab keine echte Lösung dafür.
Folgender workaround könnte helfen:
ändere "pvr350.DeviceNumber = 16" auf 17 ab, und schau, ob das Plugin dann durchstartet. Du musst dann wohl die Kabelpeitsche an der anderen PVR350 anstecken.
Da isser wieder ;-),
nu sieht die Ausgabe so aus:
linvdr:~# modprobe ivtvfb
linvdr:~# vdr -c /etc/vdr -L /usr/lib/vdr/plugins -v /video0 -Ppvr350 -Ppvrinput pvr350: 22:13:16 pvr350: IVTV version=0x010200 found
pvr350: 22:13:16 cPvr350Device::OpenV4L2()
pvr350: 22:13:16 cPvr350Device::OpenV4L2() 0 16 0 ff
pvr350: 22:13:17 cPvr350Device::SetVideoSize(x=0,y=0,w=720,d=576)
pvr350: 22:13:17 cPvr350Device::Kernelversion=2.6.23.9
pvr350: 22:13:17 cPvr350Device::MakePrimaryDevice(true)
pvr350: 22:13:17 cPvr350Device::SetVideoFormat(VideoFormat16_9=false)
pvrinput: 22:13:17 cPvrDevice::Probe():found Hauppauge WinTV PVR-350
pvrinput: 22:13:17 new cPvrDevice (0)
pvrinput: 22:13:17 /dev/video0 = Hauppauge WinTV PVR-350
pvrinput: 22:13:17 BusID = 0000:01:05.0
pvrinput: 22:13:17 ivtv Version 0x010200
pvrinput: 22:13:17 /dev/radio0 = FM radio dev
pvrinput: 22:13:17 QueryAllControls
pvrinput: 22:13:17 input 0 = Tuner 1
pvrinput: 22:13:17 input 1 = S-Video 1
pvrinput: 22:13:17 input 2 = Composite 1
pvrinput: 22:13:17 input 3 = S-Video 2
pvrinput: 22:13:17 input 4 = Composite 2
pvrinput: 22:13:17 input 5 = Composite 3
pvrinput: 22:13:17 cPvrDevice::SetInput to 0
pvrinput: 22:13:17 SetControlValue(Stream Type, 0)
pvrinput: 22:13:17 SetControlValue(Audio Encoding Layer, 1)
pvrinput: 22:13:17 SetControlValue(Video Peak Bitrate, 15000000)
pvrinput: 22:13:17 cPvrDevice::SetVideoSize
pvrinput: 22:13:17 SetVideoNorm(PAL)
pvrinput: 22:13:17 SetVBImode(PAL, 1)
pvrinput: 22:13:17 cPvrDevice::ReInit
pvrinput: 22:13:17 cPvrDevice::SetTunerAudioMode(bilingual)
pvrinput: 22:13:17 SetControlValue(Video Aspect, 1)
pvrinput: 22:13:17 SetControlValue(Audio Layer II Bitrate, 10)
pvrinput: 22:13:17 SetControlValue(Audio Sampling Frequency, 1)
pvrinput: 22:13:17 SetControlValue(Video Bitrate, 6000000)
pvrinput: 22:13:17 SetControlValue(Video Bitrate Mode, 0)
pvrinput: 22:13:17 SetControlValue(Video GOP Size, 12)
pvrinput: 22:13:17 SetControlValue(Video GOP Closure, 1)
pvrinput: 22:13:17 SetControlValue(Video B Frames, 2)
pvrinput: 22:13:17 SetControlValue(Spatial Filter Mode, 0)
pvrinput: 22:13:17 SetControlValue(Spatial Filter, 0)
pvrinput: 22:13:17 SetControlValue(Spatial Luma Filter Type, 0)
pvrinput: 22:13:17 SetControlValue(Spatial Chroma Filter Type, 0)
pvrinput: 22:13:17 SetControlValue(Temporal Filter Mode, 0)
pvrinput: 22:13:17 SetControlValue(Temporal Filter, 0)
pvrinput: 22:13:17 SetControlValue(Median Filter Type, 0)
pvrinput: 22:13:17 SetControlValue(Median Luma Filter Minimum, 0)
pvrinput: 22:13:17 SetControlValue(Median Luma Filter Maximum, 255)
pvrinput: 22:13:17 SetControlValue(Median Chroma Filter Minimum, 0)
pvrinput: 22:13:17 SetControlValue(Median Chroma Filter Maximum, 255)
pvrinput: 22:13:17 SetControlValue(Brightness, 128)
pvrinput: 22:13:17 SetControlValue(Contrast, 64)
pvrinput: 22:13:17 SetControlValue(Saturation, 64)
pvrinput: 22:13:17 SetControlValue(Hue, 0)
pvrinput: 22:13:17 SetControlValue(Volume, 62258)
pvrinput: 22:13:17 SetControlValue(Mute, 0)
pvrinput: 22:13:17 SetControlValue(Video Bitrate, 6000000)
pvrinput: 22:13:17 cPvrReadThread
pvrinput: 22:13:17 cPvrReadThread::Action(): Entering Action()
pvrinput: 22:13:17 cPvrDevice::Probe():found Hauppauge WinTV PVR-350
pvrinput: 22:13:17 new cPvrDevice (1)
pvrinput: 22:13:17 /dev/video1 = Hauppauge WinTV PVR-350
pvrinput: 22:13:17 BusID = 0000:01:09.0
pvrinput: 22:13:17 ivtv Version 0x010200
pvrinput: 22:13:18 QueryAllControls
pvrinput: 22:13:18 input 0 = Tuner 1
pvrinput: 22:13:18 input 1 = S-Video 1
pvrinput: 22:13:18 input 2 = Composite 1
pvrinput: 22:13:18 input 3 = S-Video 2
pvrinput: 22:13:18 input 4 = Composite 2
pvrinput: 22:13:18 input 5 = Composite 3
pvrinput: 22:13:18 cPvrDevice::SetInput to 0
pvrinput: 22:13:18 SetControlValue(Stream Type, 0)
pvrinput: 22:13:18 SetControlValue(Audio Encoding Layer, 1)
pvrinput: 22:13:18 SetControlValue(Video Peak Bitrate, 15000000)
pvrinput: 22:13:18 cPvrDevice::SetVideoSize
pvrinput: 22:13:18 SetVideoNorm(PAL)
pvrinput: 22:13:18 SetVBImode(PAL, 1)
pvrinput: 22:13:18 cPvrDevice::ReInit
pvrinput: 22:13:18 cPvrDevice::SetTunerAudioMode(bilingual)
pvrinput: 22:13:18 SetControlValue(Video Aspect, 1)
pvrinput: 22:13:18 SetControlValue(Audio Layer II Bitrate, 10)
pvrinput: 22:13:18 SetControlValue(Audio Sampling Frequency, 1)
pvrinput: 22:13:18 SetControlValue(Video Bitrate, 6000000)
pvrinput: 22:13:18 SetControlValue(Video Bitrate Mode, 0)
pvrinput: 22:13:18 SetControlValue(Video GOP Size, 12)
pvrinput: 22:13:18 SetControlValue(Video GOP Closure, 1)
pvrinput: 22:13:18 SetControlValue(Video B Frames, 2)
pvrinput: 22:13:18 SetControlValue(Spatial Filter Mode, 0)
pvrinput: 22:13:18 SetControlValue(Spatial Filter, 0)
Alles anzeigen
Allerdings han isch jetzt kein Kanal mehr egal wo isch die Peitsche einstecke die die Ausgabe zum Fernseher macht.
Zwei fragen habe ich noch,
die LogLevel muss ich ja wieder zurück stellen, ich pflaume habe vergessen welche die Standard Einstellungen sind, die könntest Du mir ja freundlicher Weise auch noch geben.
Und, auch wenn die Frage doof klingt, es müssen doch in beiden Karten jeweils ein Antennenkabel rein wegen dem Datenstrom, oder sehe ich da was falsch??
Jetzt bricht die Putty Verbindung nicht mehr ab, das wäre schon mal mit der Umstellung von 16 auf 17 geregelt.
ZitatOriginal von forces1de
Allerdings han isch jetzt kein Kanal mehr egal wo isch die Peitsche einstecke die die Ausgabe zum Fernseher macht.
aber Du siehst das OSD auf dem TV?
ZitatOriginal von forces1de
die LogLevel muss ich ja wieder zurück stellen, ich pflaume habe vergessen welche die Standard Einstellungen sind, die könntest Du mir ja freundlicher Weise auch noch geben.
jeweils 1 reicht, aber bis zur Klärung aller Probleme lass es mal so stehen. Ist bei pvr350 der loglevel wirklich 3? sieht nicht sonderlich gesprächig aus. Sieht man mehr beim Umschalten?
Zitat
Und, auch wenn die Frage doof klingt, es müssen doch in beiden Karten jeweils ein Antennenkabel rein wegen dem Datenstrom
natürlich
jupp Loglevel ist 3, ich habe mich vertan die Putty Verbindung kappt sich wieder.
Ich hatte kurz ne Info "Kanalinformationen nicht Verfügbar" vom OSD, aber das war es dann auch......
Ich bin inner stunde oder zwei zurück, ich mal eben was erledigen gehen aber dann geht es weiter
demnach scheint das OSD also zu gehen, d.h. das pvr350-Plugin läuft.
Ich würde jetzt als nächstes die zweite PVR350 (die im Moment /dev/video16 ist und nicht zur Ausgabe dient) testweise rausnehmen und sehen, ob die verbleibende Karte einzeln läuft. Allerdings musst du dann vorher pvr350.DeviceNumber wieder auf 16 setzen, denn ohne die erste PVR350 wird aus 17 ja wieder 16.
wie sieht Deine channels.conf aus?
Du hast dort hoffentlich hinter der Frequenz nichts anderes als C0 stehen, Beispiel:
mit C12, C23, C45 o.ä. kann es nicht klappen.
mach das ganze mal nicht per Putty sondern schau, was da am Monitor passiert. Sieht man kernel crashes oder segmentation faults?
Gibt es evtl. einen IRQ-Konflikt? Stecken die Karten in separaten Slots, oder etwa in einer Risercard?
Hallo,
die channels sehen so aus:
keine Risercard.
Am Monitor probiert und der selbe effekt wie bei putty der Rechner hängt sich auf mit beiden Karten.
Die Karte die bei der Installation verwendet habe läuft Problemlos tauch ich die karten aus mit dem selben PCI platz oder nen anderen dann funzt es nicht mit der anderen Karte.
Die Karte funktioniert aber, das weiß ich so genau weil ich sie auf meinem Linux server ausprobiert habe.
Das versteh jetzt mal wer will, klingt komisch, is aber so.
Mit dem OSD war auch nur ein kurzer effekt hatte bei weiteren versuchen nicht geklappt.....
Gruß
ich
ZitatOriginal von forces1de
Die Karte die bei der Installation verwendet habe läuft Problemlos tauch ich die karten aus mit dem selben PCI platz oder nen anderen dann funzt es nicht mit der anderen Karte.
kannst Du das nochmal etwas verständlicher beschreiben?
Jde Karte einzeln für sich funktioniert, und nur wenn beide Karten drin sind (egal in welchen Steckplätzen verteilt) hängt sich der Rechner auf?
Mir fällt da weiter nichts ein. Ich werde jetzt mal einen Test mit zwei PVR350 in meinem vdr machen.
klemm mal probeweise das LCD-Display ab. Möglicherweise beisst sich da etwas mit dem framebuffer.
noch eine Idee:
hast Du eine Grafikkarte in Deinem System, ggf.onboard?
Hast Du Änderungen an der /boot/grub/menu.lst vorgenommen bzw. wie sieht die Kernel-Zeile aus?
Hallo Dr.,
die Kernelzeile sieht so aus:
die Einstellung habe ich auf normal stehen, da ich ich sonst auf dem Ferseher den Bootvorgang sehe.
Auf dem Board is ne Onboard Graka.
Mit dem LCD muss ich noch probieren.
Nochmal zu den Karten:
Karte 1 die ich bei der Installation verbaut habe läuft alleine klasse. Beide Karten keine Ausgabe.
Karte 2 die ich nachträglich verbauen möchte zeigt nichts, wenn sie alleine eingesteckt ist, nicht auf dem selben PCI steckplatz von Karte1 noch auf einem anderen und die Karte läuft auf jeden Fall, das habe ich in meinem Linux Server getestet.
Weitere tests führe ich gleich durch......
wenn Du eine onborad-Grafikkarte hast, solltest Du versuchen, für die einen framebuffer zu laden, damit die Konsole darüber ausgegeben wird. Wenn es mit vga=0x317 nicht funktioniert, unterstützt vesa Deinen Grafikchip nicht. Eventuell kann man eine andere Kerneloption verwenden und einen anderen fb-Treiber vorgeben.
wenn die Karte 2 auch alleine nicht läuft, dann ist sie defekt. Interessant wären die log von pvrinput und pvr350. Wurde sie auch im Server zur Ausgabe genutzt, oder wurde da nur der Encoder genutzt?
Im server wurde nur der encoder genutzt ich habe da tatsächlich mit
ivtv-tune -west-europe -SE11 -d/dev/video0
und mit
cat /dev/video0 > /......../video.mpg
nur den Datenstrom aufgezeichnet.
Die Console wird bei vga=normal auch über die onboardgraka ausgegeben wenn ich das auf vga=0x317 setze sehe ich, wie gesagt die Console auf dem ferseher (über die Ausgabe der PVR) bis der VDR richtig gestartet ist und dann schaltet das ganze um auf die die VDR Ausgabe.
Logs folgen noch mit der anderen Karte...
ZitatOriginal von forces1de
Die Console wird bei vga=normal auch über die onboardgraka ausgegeben
dann mach das mal und schau, was "cat /proc/fb" sagt
So ist zwar ein bisschen spät aber hier kommt der log mit nur der zweiten Karte:
linvdr:~# modprobe ivtvfb
linvdr:~# vdr -c /etc/vdr -L /usr/lib/vdr/plugins -v /video0 -Ppvr350 -Ppvrinput
pvr350: 02:09:31 pvr350: IVTV version=0x010200 found
pvr350: 02:09:31 cPvr350Device::OpenV4L2()
pvr350: 02:09:31 cPvr350Device::OpenV4L2() 0 16 0 ff
pvr350: 02:09:31 cPvr350Device::SetVideoSize(x=0,y=0,w=720,d=576)
pvr350: 02:09:31 cPvr350Device::Kernelversion=2.6.23.9
pvr350: 02:09:31 cPvr350Device::MakePrimaryDevice(true)
pvr350: 02:09:31 cPvr350Device::SetVideoFormat(VideoFormat16_9=false)
pvrinput: 02:09:31 cPvrDevice::Probe():found Hauppauge WinTV PVR-350
pvrinput: 02:09:31 new cPvrDevice (0)
pvrinput: 02:09:31 /dev/video0 = Hauppauge WinTV PVR-350
pvrinput: 02:09:31 BusID = 0000:01:09.0
pvrinput: 02:09:31 ivtv Version 0x010200
pvrinput: 02:09:31 /dev/radio0 = FM radio dev
pvrinput: 02:09:31 QueryAllControls
pvrinput: 02:09:31 input 0 = Tuner 1
pvrinput: 02:09:31 input 1 = S-Video 1
pvrinput: 02:09:31 input 2 = Composite 1
pvrinput: 02:09:31 input 3 = S-Video 2
pvrinput: 02:09:31 input 4 = Composite 2
pvrinput: 02:09:31 input 5 = Composite 3
pvrinput: 02:09:31 cPvrDevice::SetInput to 0
pvrinput: 02:09:31 SetControlValue(Stream Type, 0)
pvrinput: 02:09:31 SetControlValue(Audio Encoding Layer, 1)
pvrinput: 02:09:31 SetControlValue(Video Peak Bitrate, 15000000)
pvrinput: 02:09:31 cPvrDevice::SetVideoSize
pvrinput: 02:09:31 SetVideoNorm(PAL)
pvrinput: 02:09:31 SetVBImode(PAL, 1)
pvrinput: 02:09:31 cPvrDevice::ReInit
pvrinput: 02:09:31 cPvrDevice::SetTunerAudioMode(bilingual)
pvrinput: 02:09:31 SetControlValue(Video Aspect, 1)
pvrinput: 02:09:31 SetControlValue(Audio Layer II Bitrate, 10)
pvrinput: 02:09:31 SetControlValue(Audio Sampling Frequency, 1)
pvrinput: 02:09:31 SetControlValue(Video Bitrate, 6000000)
pvrinput: 02:09:31 SetControlValue(Video Bitrate Mode, 0)
pvrinput: 02:09:31 SetControlValue(Video GOP Size, 12)
pvrinput: 02:09:31 SetControlValue(Video GOP Closure, 1)
pvrinput: 02:09:31 SetControlValue(Video B Frames, 2)
pvrinput: 02:09:31 SetControlValue(Spatial Filter Mode, 0)
pvrinput: 02:09:31 SetControlValue(Spatial Filter, 0)
pvrinput: 02:09:31 SetControlValue(Spatial Luma Filter Type, 0)
pvrinput: 02:09:31 SetControlValue(Spatial Chroma Filter Type, 0)
pvrinput: 02:09:31 SetControlValue(Temporal Filter Mode, 0)
pvrinput: 02:09:31 SetControlValue(Temporal Filter, 0)
pvrinput: 02:09:31 SetControlValue(Median Filter Type, 0)
pvrinput: 02:09:31 SetControlValue(Median Luma Filter Minimum, 0)
pvrinput: 02:09:31 SetControlValue(Median Luma Filter Maximum, 255)
pvrinput: 02:09:31 SetControlValue(Median Chroma Filter Minimum, 0)
pvrinput: 02:09:31 SetControlValue(Median Chroma Filter Maximum, 255)
pvrinput: 02:09:31 SetControlValue(Brightness, 128)
pvrinput: 02:09:31 SetControlValue(Contrast, 64)
pvrinput: 02:09:31 SetControlValue(Saturation, 64)
pvrinput: 02:09:31 SetControlValue(Hue, 0)
pvrinput: 02:09:31 SetControlValue(Volume, 62258)
pvrinput: 02:09:31 SetControlValue(Mute, 0)
pvrinput: 02:09:31 SetControlValue(Video Bitrate, 6000000)
pvrinput: 02:09:31 cPvrReadThread
pvrinput: 02:09:31 cPvrReadThread::Action(): Entering Action()
Alles anzeigen
Das heißt jetzt fehlersuche....
Und dann knallt es den VDR wieder aus, also er geht nicht richtig aus sondern irgendwie schaltet er ab, ich höre dann ein leise klack (schätze von der festplatte) und dann rührt sich nichts mehr....
So bei Karte 1 sieht es so aus:
linvdr:~# modprobe ivtvfb
linvdr:~# vdr -c /etc/vdr -L /usr/lib/vdr/plugins -v /video0 -Ppvr350 -Ppvrinput
pvr350: 02:19:33 pvr350: IVTV version=0x010200 found
pvr350: 02:19:33 cPvr350Device::OpenV4L2()
pvr350: 02:19:33 cPvr350Device::OpenV4L2() 0 16 0 ff
pvr350: 02:19:33 cPvr350Device::SetVideoSize(x=0,y=0,w=720,d=576)
pvr350: 02:19:33 cPvr350Device::Kernelversion=2.6.23.9
pvr350: 02:19:33 cPvr350Device::MakePrimaryDevice(true)
pvr350: 02:19:33 cPvr350Device::SetVideoFormat(VideoFormat16_9=false)
pvrinput: 02:19:33 cPvrDevice::Probe():found Hauppauge WinTV PVR-350
pvrinput: 02:19:33 new cPvrDevice (0)
pvrinput: 02:19:33 /dev/video0 = Hauppauge WinTV PVR-350
pvrinput: 02:19:33 BusID = 0000:01:09.0
pvrinput: 02:19:33 ivtv Version 0x010200
pvrinput: 02:19:33 /dev/radio0 = FM radio dev
pvrinput: 02:19:33 QueryAllControls
pvrinput: 02:19:33 input 0 = Tuner 1
pvrinput: 02:19:33 input 1 = S-Video 1
pvrinput: 02:19:33 input 2 = Composite 1
pvrinput: 02:19:33 input 3 = S-Video 2
pvrinput: 02:19:33 input 4 = Composite 2
pvrinput: 02:19:33 input 5 = Composite 3
pvrinput: 02:19:33 cPvrDevice::SetInput to 0
pvrinput: 02:19:33 SetControlValue(Stream Type, 0)
pvrinput: 02:19:33 SetControlValue(Audio Encoding Layer, 1)
pvrinput: 02:19:33 SetControlValue(Video Peak Bitrate, 15000000)
pvrinput: 02:19:33 cPvrDevice::SetVideoSize
pvrinput: 02:19:33 SetVideoNorm(PAL)
pvrinput: 02:19:33 SetVBImode(PAL, 1)
pvrinput: 02:19:33 cPvrDevice::ReInit
pvrinput: 02:19:33 cPvrDevice::SetTunerAudioMode(bilingual)
pvrinput: 02:19:33 SetControlValue(Video Aspect, 1)
pvrinput: 02:19:33 SetControlValue(Audio Layer II Bitrate, 10)
pvrinput: 02:19:33 SetControlValue(Audio Sampling Frequency, 1)
pvrinput: 02:19:33 SetControlValue(Video Bitrate, 6000000)
pvrinput: 02:19:33 SetControlValue(Video Bitrate Mode, 0)
pvrinput: 02:19:33 SetControlValue(Video GOP Size, 12)
pvrinput: 02:19:33 SetControlValue(Video GOP Closure, 1)
pvrinput: 02:19:33 SetControlValue(Video B Frames, 2)
pvrinput: 02:19:33 SetControlValue(Spatial Filter Mode, 0)
pvrinput: 02:19:33 SetControlValue(Spatial Filter, 0)
pvrinput: 02:19:33 SetControlValue(Spatial Luma Filter Type, 0)
pvrinput: 02:19:34 SetControlValue(Spatial Chroma Filter Type, 0)
pvrinput: 02:19:34 SetControlValue(Temporal Filter Mode, 0)
pvrinput: 02:19:34 SetControlValue(Temporal Filter, 0)
pvrinput: 02:19:34 SetControlValue(Median Filter Type, 0)
pvrinput: 02:19:34 SetControlValue(Median Luma Filter Minimum, 0)
pvrinput: 02:19:34 SetControlValue(Median Luma Filter Maximum, 255)
pvrinput: 02:19:34 SetControlValue(Median Chroma Filter Minimum, 0)
pvrinput: 02:19:34 SetControlValue(Median Chroma Filter Maximum, 255)
pvrinput: 02:19:34 SetControlValue(Brightness, 128)
pvrinput: 02:19:34 SetControlValue(Contrast, 64)
pvrinput: 02:19:34 SetControlValue(Saturation, 64)
pvrinput: 02:19:34 SetControlValue(Hue, 0)
pvrinput: 02:19:34 SetControlValue(Volume, 62258)
pvrinput: 02:19:34 SetControlValue(Mute, 0)
pvrinput: 02:19:34 SetControlValue(Video Bitrate, 6000000)
pvrinput: 02:19:34 cPvrReadThread
pvrinput: 02:19:34 cPvrReadThread::Action(): Entering Action()
pvrinput: 02:19:34 cPvrDevice::Initialize(): found 1 PVR device
pvrinput: 02:19:34 cPvrDevice::ParseChannel: using old channel syntax.
pvrinput: 02:19:34 cPvrDevice::ProvidesChannel: /dev/video0: Channel 5 (RTL2) 287.25MHz, -> true
pvrinput: 02:19:34 cPvrDevice::SetChannelDevice 5 (RTL2) 287.25MHz (/dev/video0 = ivtv)
pvrinput: 02:19:34 cPvrDevice::ParseChannel: using old channel syntax.
pvrinput: 02:19:34 ~cPvrReadThread
pvrinput: 02:19:34 cPvrReadThread::Action(): leaving Action()
pvrinput: 02:19:34 cPvrDevice::SetEncoderState (Stop)
pvrinput: 02:19:35 channel is television.
pvrinput: 02:19:35 cPvrDevice::Tune(): Frequency set to 287.25 MHz (4596)
pvrinput: 02:19:35 cPvrDevice::SetEncoderState (Start)
pvrinput: 02:19:35 cPvrReadThread
pvrinput: 02:19:35 cPvrReadThread::Action(): Entering Action()
pvrinput: 02:19:35 cPvrDevice::SetPid 301 = On
pvrinput: 02:19:35 cPvrDevice::SetPid 300 = On
pvrinput: 02:19:35 cPvrDevice::OpenDvr
pvr350: 02:19:35 cPvr350Device::SetAudioChannelDevice (stereo)
pvr350: 02:19:35 cPvr350Device::SetPlayMode() (pmAudioVideo)
pvr350: 02:19:35 cPvr350Device::Start_Decode()
pvr350: 02:19:36 cPvr350Device::Set_wss_mode()
pvr350: 02:19:36 pvr350: Trying size set (4:3): 720x576 0x0
pvr350: 02:19:36 cPvr350Device::SetAudioChannelDevice (stereo)
pvr350: 02:19:36 cPvr350Device::PlayAudio(): Length=681, Id=0xc0
Alles anzeigen
Hier kommt der Teil der bei Karte 2 nicht geladen wird:
pvrinput: 02:19:34 cPvrReadThread
pvrinput: 02:19:34 cPvrReadThread::Action(): Entering Action()
pvrinput: 02:19:34 cPvrDevice::Initialize(): found 1 PVR device
pvrinput: 02:19:34 cPvrDevice::ParseChannel: using old channel syntax.
pvrinput: 02:19:34 cPvrDevice::ProvidesChannel: /dev/video0: Channel 5 (RTL2) 287.25MHz, -> true
pvrinput: 02:19:34 cPvrDevice::SetChannelDevice 5 (RTL2) 287.25MHz (/dev/video0 = ivtv)
pvrinput: 02:19:34 cPvrDevice::ParseChannel: using old channel syntax.
pvrinput: 02:19:34 ~cPvrReadThread
pvrinput: 02:19:34 cPvrReadThread::Action(): leaving Action()
pvrinput: 02:19:34 cPvrDevice::SetEncoderState (Stop)
pvrinput: 02:19:35 channel is television.
pvrinput: 02:19:35 cPvrDevice::Tune(): Frequency set to 287.25 MHz (4596)
pvrinput: 02:19:35 cPvrDevice::SetEncoderState (Start)
pvrinput: 02:19:35 cPvrReadThread
pvrinput: 02:19:35 cPvrReadThread::Action(): Entering Action()
pvrinput: 02:19:35 cPvrDevice::SetPid 301 = On
pvrinput: 02:19:35 cPvrDevice::SetPid 300 = On
pvrinput: 02:19:35 cPvrDevice::OpenDvr
pvr350: 02:19:35 cPvr350Device::SetAudioChannelDevice (stereo)
pvr350: 02:19:35 cPvr350Device::SetPlayMode() (pmAudioVideo)
pvr350: 02:19:35 cPvr350Device::Start_Decode()
pvr350: 02:19:36 cPvr350Device::Set_wss_mode()
pvr350: 02:19:36 pvr350: Trying size set (4:3): 720x576 0x0
pvr350: 02:19:36 cPvr350Device::SetAudioChannelDevice (stereo)
pvr350: 02:19:36 cPvr350Device::PlayAudio(): Length=681, Id=0xc0
Alles anzeigen
Das lässt nicht gutes erahnen........
Tja, man kann nicht immer Glück bei ebucht haben.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!