Skystar2 wird nicht erkannt!?!

Hallo,

meine neue skystar2 Karte soll zusammen mit einer Nexus in meinem System zusammen arbeiten. Leider tut sie es aber nicht....

dmesg sagt nur

Zitat

saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input4
dvb-ttpci: found av7110-0.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart: Detected VIA KT400/KT400A/KT600 chipset

mache ich ein modprobe b2c2-flexcop-pci
kommt::

b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully

at jemand einen Tipp für mich?

Danke und Gruß,

Sattwister

Hi,

ja danke, bloß verwende ich Kanotix mit x-vdr und dort schaut die /etc/ini.t/vdr so aus

Zitat

#!/bin/sh

# x-vdr (Installations-Skript fuer einen VDR mit Debian als Basis)
# von Marc Wernecke - www.zulu-entertainment.de
# 21.12.2006
# /etc/init.d/vdr

PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DESC="Linux Video Disk Recorder"
NAME="vdr"

if [ -f /etc/default/vdr ]; then
. /etc/default/vdr
else
logger "$0 - error -> /etc/default/vdr does not exists"
exit 1
fi

DAEMON=$VDRBINDIR/runvdr
PIDFILE=/var/run/runvdr.pid

test -x "$DAEMON" exit 0
test -x "$VDRPRG" exit 0

function clean_console() {
if [ "$KEYB_TTY" != "" ]; then
tput -Tlinux clear > $KEYB_TTY
fi
}

function switch_console() {
if [ "$KEYB_TTY" != "" ]; then
clean_console
echo -e "This tty is currently mapped to VDR, keypresses aren't echoed.\r" > $KEYB_TTY
echo -n "For a login prompt switch to another console." > $KEYB_TTY
chvt `echo "$KEYB_TTY" | sed "s/\/dev\/tty//"`
REDIRECT="< $KEYB_TTY"
fi
}

function get_status() {
if start-stop-daemon --start --startas $DAEMON --test \
--name $(basename $DAEMON) --pidfile $PIDFILE >/dev/null
then
echo " - is not running."
exit 3
else
echo " - is running."
exit 0
fi
}

function startvdr() {
if [ "$AUTOSTART" != "off" ]; then
# only start vdr if there is no other instance running
if start-stop-daemon --start --startas $DAEMON --test \
--name $(basename $DAEMON) --pidfile $PIDFILE >/dev/null
then
# stopping dvb-bootsplash (mplayer)
[ -x /etc/init.d/dvb-bootsplash ] && /etc/init.d/dvb-bootsplash stop
# starting LCDd
# uncomment this only if you DONT use the systems init rc
# [ "$LCDproc" = "on" ] && [ -f /etc/init.d/lcdd ] && /etc/init.d/lcdd start &
# starting Video Disk Recorder
# switch_console
start-stop-daemon --start --quiet --startas $DAEMON --background \
--name $(basename $DAEMON) --pidfile $PIDFILE --make-pidfile -- $REDIRECT
else
echo -n " - seems to be running already"
fi
else
echo -n " - aborted (to enable the daemon, set AUTOSTART=\"on\" in /etc/default/vdr)"
fi
}

function stopvdr() {
if start-stop-daemon --stop --retry 30 \
--name $(basename $DAEMON) --pidfile $PIDFILE >/dev/null
then
start-stop-daemon --stop --retry 30 --oknodo --exec $VDRPRG >/dev/null
rm -f $PIDFILE
clean_console
# graphlcd shutdown sequence
[ "$graphlcd_base" = "on" ] && [ -f /etc/init.d/x-lcd ] && /etc/init.d/x-lcd stop
# stopping LCDd
# uncomment this only if you DONT use the systems init rc
# [ "$LCDproc" = "on" ] && [ -f /etc/init.d/lcdd ] && /etc/init.d/lcdd stop
else
echo -n " - seems not to be running"
fi
}

case "$1" in
start)
echo -n "Starting $DESC: $NAME"
startvdr
echo "."
;;
stop)
echo -n "Stopping $DESC: $NAME"
stopvdr
echo "."
;;
restart|force-reload)
echo -n "Restarting $DESC: $NAME"
stopvdr
sleep 4
startvdr
echo "."
;;
status)
echo -n "Getting status of $DESC: $NAME"
get_status
;;
*)
N=/etc/init.d/$NAME
echo "Usage: $N {start|stop|restart|force-reload}" >&2
exit 1
;;
esac

exit 0

Alles anzeigen

/usr/bin/runvdr

Zitat

#!/bin/sh

# x-vdr (Installations-Skript fuer einen VDR mit Debian als Basis)
# von Marc Wernecke - www.zulu-entertainment.de
# 14.02.2007
# runvdr

#export LD_ASSUME_KERNEL=2.4.1
export LANG=de_DE.iso8859-1
export LC_ALL=de_DE.iso8859-1

KILL="/usr/bin/killall -q -TERM"
KERNEL=`uname -r`

function vdr_settings() {
# load VDR configuration
if [ -f /etc/default/vdr ]; then
. /etc/default/vdr
else
logger "$0 - error -> /etc/default/vdr does not exists"
exit 1
fi

test -x "$VDRPRG" exit 0

# java for burn
if [ "$burn" = "on" ]; then
[ -z "$JAVA_HOME" ] && export JAVA_HOME="/usr/lib/jvm/java-1.5.0-sun/jre"
[ -z "$PROJECTX_HOME" ] && export PROJECTX_HOME="/usr/local/src/ProjectX"
fi

# set DISPLAY
# - activate automatic login
# - copy x-vdr/extra/xhost to ~/.kde/Autostart and set xhost executable
if [ "$softdevice" = "on" ] [ "$xineliboutput" = "on" ]; then
[ -z "$DISPLAY" ] && export DISPLAY=:$XV_DISPLAY
fi

# load nvram
if [ `which nvram-wakeup | wc -l` -gt 0 ] && [ `lsmod | grep -cw 'nvram'` -eq 0 ]; then
modprobe -q nvram
fi

# load cdfs
if [ `lsmod | grep -cw 'cdfs'` -eq 0 ]; then
modprobe -q cdfs
fi

# load av7710ir
if [ -e /proc/av7110_ir ] [ -e /proc/budget_ci_ir ]; then
for FILE in av7110_ir budget_ci_ir; do
if [ -e "/proc/$FILE" ]; then
chown $VDRUSER:$VDRGROUP /proc/$FILE
fi
done
if [ `lsmod | grep -cw 'evdev'` -eq 0 ]; then modprobe -q evdev ; fi
fi

# load em8300
if [ "$em8300" = "on" ]; then
# EM8300="/lib/modules/$KERNEL/em8300"
# if [ -f "$EM8300/adv717x.ko" ] && [ -f "$EM8300/bt865.ko" ] && [ -f "$EM8300/em8300.ko" ]; then
# $VDRSCRIPTDIR/rmm
# $VDRSCRIPTDIR/ldm
[ "$dxr3" != "on" ] && em8300setup
# fi
fi

# load parport
if [ "$graphlcd_base" = "on" ]; then
[ `lsmod | grep -cw 'parport'` -eq 0 ] && modprobe -q parport
[ `lsmod | grep -cw 'parport_pc'` -eq 0 ] && modprobe -q parport_pc
[ `lsmod | grep -cw 'ppdev'` -eq 0 ] && modprobe -q ppdev
# chmod 0666 /dev/parport0
fi

# only for mplayer via xine
# - copy x-vdr/extra/xhost to ~/.kde/Autostart and set xhost executable
if [ "$VDRUSER" != "root" ] && [ "$xine" = "on" ] && [ "$mplayer" = "on" ]; then
chmod 666 /dev/rtc
echo 1024 > /proc/sys/dev/rtc/max-user-freq
fi


# plugins
PLUGINS=""
# video devices
[ "$dxr3" = "on" ] && PLUGINS="$PLUGINS -P'dxr3'"
[ "$softdevice" = "on" ] && PLUGINS="$PLUGINS -P'softdevice $softdevice_args'"
[ "$xine" = "on" ] && PLUGINS="$PLUGINS -P'xine $xine_args'"
[ "$xineliboutput" = "on" ] && PLUGINS="$PLUGINS -P'xineliboutput $xineliboutput_args'"
# other
[ "$admin" = "on" ] && PLUGINS="$PLUGINS -P'admin'"
[ "$adzap" = "on" ] && PLUGINS="$PLUGINS -P'adzap $adzap_args'"
[ "$alcd" = "on" ] && PLUGINS="$PLUGINS -P'alcd $alcd_args'"
[ "$analogradio" = "on" ] && PLUGINS="$PLUGINS -P'analogradio $analogradio_args'"
[ "$atmo" = "on" ] && PLUGINS="$PLUGINS -P'atmo $atmo_args'"
[ "$audiorecorder" = "on" ] && PLUGINS="$PLUGINS -P'audiorecorder $audiorecorder_args'"
[ "$autosort" = "on" ] && PLUGINS="$PLUGINS -P'autosort'"
[ "$autotimeredit" = "on" ] && PLUGINS="$PLUGINS -P'autotimeredit $autotimeredit_args'"
[ "$avolctl" = "on" ] && PLUGINS="$PLUGINS -P'avolctl'"
[ "$beep" = "on" ] && PLUGINS="$PLUGINS -P'beep'"
[ "$bitstreamout" = "on" ] && PLUGINS="$PLUGINS -P'bitstreamout $bitstreamout_args'"
[ "$burn" = "on" ] && PLUGINS="$PLUGINS -P'burn $burn_args'"
[ "$calc" = "on" ] && PLUGINS="$PLUGINS -P'calc'"
[ "$cdda" = "on" ] && PLUGINS="$PLUGINS -P'cdda $cdda_args'"
[ "$chanorg" = "on" ] && PLUGINS="$PLUGINS -P'chanorg $chanorg_args'"
[ "$channelswitcher" = "on" ] && PLUGINS="$PLUGINS -P'channelswitcher'"
[ "$cinebars" = "on" ] && PLUGINS="$PLUGINS -P'cinebars'"
[ "$clock" = "on" ] && PLUGINS="$PLUGINS -P'clock'"
[ "$console" = "on" ] && PLUGINS="$PLUGINS -P'console $console_args'"
[ "$control" = "on" ] && PLUGINS="$PLUGINS -P'control $control_args'"
[ "$csf" = "on" ] && PLUGINS="$PLUGINS -P'csf'"
[ "$cutalot" = "on" ] && PLUGINS="$PLUGINS -P'cutalot'"
[ "$decruft" = "on" ] && PLUGINS="$PLUGINS -P'decruft'"
[ "$digicam" = "on" ] && PLUGINS="$PLUGINS -P'digicam'"
[ "$director" = "on" ] && PLUGINS="$PLUGINS -P'director'"
[ "$dummydevice" = "on" ] && PLUGINS="$PLUGINS -P'dummydevice'"
[ "$dvd" = "on" ] && PLUGINS="$PLUGINS -P'dvd $dvd_args'"
[ "$dvdconvert" = "on" ] && PLUGINS="$PLUGINS -P'dvdconvert $dvdconvert_args'"
[ "$dvdselect" = "on" ] && PLUGINS="$PLUGINS -P'dvdselect'"
[ "$dvdswitch" = "on" ] && PLUGINS="$PLUGINS -P'dvdswitch $dvdswitch_args'"
if [ "$epgsearch" = "on" ]; then
PLUGINS="$PLUGINS -P'epgsearch $epgsearch_args'"
[ "$epgsearchonly" = "on" ] && PLUGINS="$PLUGINS -P'epgsearchonly'"
[ "$conflictcheckonly" = "on" ] && PLUGINS="$PLUGINS -P'conflictcheckonly'"
fi
[ "$extb" = "on" ] && PLUGINS="$PLUGINS -P'extb $extb_args'"
[ "$extrecmenu" = "on" ] && PLUGINS="$PLUGINS -P'extrecmenu'"
[ "$femon" = "on" ] && PLUGINS="$PLUGINS -P'femon'"
[ "$ffnetdev" = "on" ] && PLUGINS="$PLUGINS -P'ffnetdev $ffnetdev_args'"
[ "$filebrowser" = "on" ] && PLUGINS="$PLUGINS -P'filebrowser'"
[ "$freecell" = "on" ] && PLUGINS="$PLUGINS -P'freecell'"
[ "$fussball" = "on" ] && PLUGINS="$PLUGINS -P'fussball'"
[ "$games" = "on" ] && PLUGINS="$PLUGINS -P'games'"
[ "$graphlcd" = "on" ] && PLUGINS="$PLUGINS -P'graphlcd $graphlcd_args'"
[ "$graphtft" = "on" ] && PLUGINS="$PLUGINS -P'graphtft $graphtft_args'"
[ "$image" = "on" ] && PLUGINS="$PLUGINS -P'image $image_args'"
[ "$ipod" = "on" ] && PLUGINS="$PLUGINS -P'ipod'"
[ "$launcher" = "on" ] && PLUGINS="$PLUGINS -P'launcher'"
[ "$lcdproc" = "on" ] && PLUGINS="$PLUGINS -P'lcdproc $lcdproc_args'"
[ "$lcr" = "on" ] && PLUGINS="$PLUGINS -P'lcr $lcr_args'"
[ "$mailbox" = "on" ] && PLUGINS="$PLUGINS -P'mailbox $mailbox_args'"
[ "$manual" = "on" ] && PLUGINS="$PLUGINS -P'manual'"
[ "$mediamvp" = "on" ] && PLUGINS="$PLUGINS -P'mediamvp $mediamvp_args'"
[ "$mlcd" = "on" ] && PLUGINS="$PLUGINS -P'mlcd'"
[ "$mlist" = "on" ] && PLUGINS="$PLUGINS -P'mlist'"
[ "$mousemate" = "on" ] && PLUGINS="$PLUGINS -P'mousemate $mousemate_args'"
[ "$mp3" = "on" ] && PLUGINS="$PLUGINS -P'mp3 $mp3_args'"
[ "$mp3ng" = "on" ] && PLUGINS="$PLUGINS -P'mp3ng $mp3ng_args'"
[ "$mpcsmon" = "on" ] && PLUGINS="$PLUGINS -P'mpcsmon'"
[ "$mplayer" = "on" ] && PLUGINS="$PLUGINS -P'mplayer $mplayer_args'"
[ "$muggle" = "on" ] && PLUGINS="$PLUGINS -P'muggle $muggle_args'"
[ "$netconfig" = "on" ] && PLUGINS="$PLUGINS -P'netconfig $netconfig_args'"
[ "$newsticker" = "on" ] && PLUGINS="$PLUGINS -P'newsticker'"
[ "$noepgmenu" = "on" ] && PLUGINS="$PLUGINS -P'noepgmenu'"
[ "$nordlichtsepg" = "on" ] && PLUGINS="$PLUGINS -P'nordlichtsepg'"
[ "$osdout" = "on" ] && PLUGINS="$PLUGINS -P'osdout'"
[ "$osdpip" = "on" ] && PLUGINS="$PLUGINS -P'osdpip'"
[ "$osdserver" = "on" ] && PLUGINS="$PLUGINS -P'osdserver'"
[ "$osdteletext" = "on" ] && PLUGINS="$PLUGINS -P'osdteletext $osdteletext_args'"
[ "$pilot" = "on" ] && PLUGINS="$PLUGINS -P'pilot'"
[ "$pilotskin" = "on" ] && PLUGINS="$PLUGINS -P'pilotskin'"
[ "$pim" = "on" ] && PLUGINS="$PLUGINS -P'pim'"
[ "$pin" = "on" ] && PLUGINS="$PLUGINS -P'pin'"
[ "$playlist" = "on" ] && PLUGINS="$PLUGINS -P'playlist $playlist_args'"
[ "$podcatcher" = "on" ] && PLUGINS="$PLUGINS -P'podcatcher $podcatcher_args'"
[ "$powermate" = "on" ] && PLUGINS="$PLUGINS -P'powermate $powermate_args'"
[ "$prefermenu" = "on" ] && PLUGINS="$PLUGINS -P'prefermenu'"
[ "$premiereepg" = "on" ] && PLUGINS="$PLUGINS -P'premiereepg'"
[ "$pvrinput" = "on" ] && PLUGINS="$PLUGINS -P'pvrinput'"
[ "$radio" = "on" ] && PLUGINS="$PLUGINS -P'radio $radio_args'"
[ "$recstatus" = "on" ] && PLUGINS="$PLUGINS -P'recstatus'"
[ "$reelchannelscan" = "on" ] && PLUGINS="$PLUGINS -P'reelchannelscan'"
[ "$remote" = "on" ] && PLUGINS="$PLUGINS -P'remote $remote_args'" && chmod 0666 $remote_event
[ "$ripit" = "on" ] && PLUGINS="$PLUGINS -P'ripit'"
[ "$rotor" = "on" ] && PLUGINS="$PLUGINS -P'rotor $rotor_args'"
[ "$rssreader" = "on" ] && PLUGINS="$PLUGINS -P'rssreader'"
[ "$screenshot" = "on" ] && PLUGINS="$PLUGINS -P'screenshot'"
[ "$setup" = "on" ] && PLUGINS="$PLUGINS -P'setup'"
[ "$skinelchi" = "on" ] && PLUGINS="$PLUGINS -P'skinelchi $skinelchi_args'"
[ "$skinenigmang" = "on" ] && PLUGINS="$PLUGINS -P'skinenigmang'"
[ "$skinreel" = "on" ] && PLUGINS="$PLUGINS -P'skinreel'"
[ "$skinsoppalusikka" = "on" ] && PLUGINS="$PLUGINS -P'skinsoppalusikka $skinsoppalusikka_args'"
[ "$sleeptimer" = "on" ] && PLUGINS="$PLUGINS -P'sleeptimer $sleeptimer_args'"
[ "$solitaire" = "on" ] && PLUGINS="$PLUGINS -P'solitaire'"
[ "$span" = "on" ] && PLUGINS="$PLUGINS -P'span'"
[ "$spider" = "on" ] && PLUGINS="$PLUGINS -P'spider'"
[ "$streamdev_client" = "on" ] && PLUGINS="$PLUGINS -P'streamdev-client'"
[ "$streamdev_server" = "on" ] && PLUGINS="$PLUGINS -P'streamdev-server $streamdev_args'"
[ "$streamplayer" = "on" ] && PLUGINS="$PLUGINS -P'streamplayer'"
[ "$submenu" = "on" ] && PLUGINS="$PLUGINS -P'submenu'"
[ "$subtitles" = "on" ] && PLUGINS="$PLUGINS -P'subtitles'"
[ "$sudoku" = "on" ] && PLUGINS="$PLUGINS -P'sudoku'"
[ "$sysinfo" = "on" ] && PLUGINS="$PLUGINS -P'sysinfo'"
[ "$taste" = "on" ] && PLUGINS="$PLUGINS -P'taste'"
[ "$text2skin" = "on" ] && PLUGINS="$PLUGINS -P'text2skin'"
[ "$ttxtsubs" = "on" ] && PLUGINS="$PLUGINS -P'ttxtsubs'"
[ "$timeline" = "on" ] && PLUGINS="$PLUGINS -P'timeline'"
[ "$touchtft" = "on" ] && PLUGINS="$PLUGINS -P'touchtft $touchtft_args'"
[ "$tvonscreen" = "on" ] && PLUGINS="$PLUGINS -P'tvonscreen $tvonscreen_args'"
[ "$tvtv" = "on" ] && PLUGINS="$PLUGINS -P'tvtv'"
[ "$undelete" = "on" ] && PLUGINS="$PLUGINS -P'undelete $undelete_args'"
[ "$vdrcd" = "on" ] && PLUGINS="$PLUGINS -P'vdrcd $vdrcd_args'"
[ "$vdrrip" = "on" ] && PLUGINS="$PLUGINS -P'vdrrip $vdrrip_args'"
[ "$vompserver" = "on" ] && PLUGINS="$PLUGINS -P'vompserver $vompserver_args'"
[ "$wapd" = "on" ] && PLUGINS="$PLUGINS -P'wapd $wapd_args'"
[ "$weatherng" = "on" ] && PLUGINS="$PLUGINS -P'weatherng $weatherng_args'"
[ "$wirbelscan" = "on" ] && PLUGINS="$PLUGINS -P'wirbelscan'"
[ "$xxvautotimer" = "on" ] && PLUGINS="$PLUGINS -P'xxvautotimer $xxvautotimer_args'"
[ "$yaepg" = "on" ] && PLUGINS="$PLUGINS -P'yaepg'"
[ "$zaphistory" = "on" ] && PLUGINS="$PLUGINS -P'zaphistory'"
[ "$default_plugins" = "on" ] && PLUGINS="$PLUGINS -P'hello' -P'osddemo' -P'svccli' -P'svcsvr' -P'sky' -P'status' -P'svdrpdemo'"

# scripts
VDRRECCMDS="$VDRSCRIPTDIR/vdrreccmds"
VDRSETTIME="$VDRSCRIPTDIR/vdrsettime"
VDRSHUTDOWN="$VDRSCRIPTDIR/vdrshutdown"

# keyboard tty (terminal for VDR)
VDRKEYBTTY=""
if [ "$KEYB_TTY" != "" ]; then
VDRKEYBTTY="-t $KEYB_TTY"
[ "$VDRUSER" != "root" ] && chmod 0666 $KEYB_TTY
fi

# cmd
VDRCMD="$VDRPRG -w $WATCHDOG -v $VIDEODIR -c $VDRCONFDIR -E $VDRVARDIR -L $VDRLIBDIR \
-s $VDRSHUTDOWN -T $VDRSETTIME -r $VDRRECCMDS $VDRKEYBTTY -u $VDRUSER $PLUGINS $OPTIONS "
}

# modules
function get_modulenames() {
KVERS=`uname -r | grep -e '2.6'`
if [ -z "$KVERS" ]; then
MODULES=`lsmod | grep 'dvb-core' | cut -d'[' -f2 | cut -d']' -f1`
else
MODULES=`lsmod | grep '^dvb_core' | awk '{print $4;}' | awk '{ gsub(/,/," ", $1); print }'`
fi
}

get_modulenames

if [ -z "$MODULES" ]; then # If no DVB-Modules were found, try to load
modprobe -q dvb # the module with the name dvb, this could
get_modulenames # be an alias for the dvb-ttpci-module or
fi # another dvb-module

MODULES="$MODULES dvb-core"

if [ `echo $MODULES | grep -cw 'b2c2_flexcop'` -gt 0 ] && [ `echo $MODULES | grep -cw 'b2c2_flexcop_pci'` -eq 0 ]; then
MODULES="b2c2_flexcop_pci $MODULES"
fi

# clear TTY
if [ "$KEYB_TTY" != "" ]; then
clear > $KEYB_TTY
fi

# Main-Script
while (true) do
# load VDR Settings
vdr_settings
# start VDR
logger "Starting Video Disk Recorder at `date`"
eval $VDRCMD >/dev/null 2>&1
if test $? -eq 0; then
logger "Video Disk Recorder stopped at `date`"
exit 0
fi
# stop VDR
logger "Stopping Video Disk Recorder at `date`"
$KILL $VDRPRG
n=10
echo -n "Waiting $n seconds ..."
for i in `seq 1 $n`; do
sleep 1
(( n=$n-1 ))
echo -n " $n"
done
echo ""
# unload Modules
for MODULE in $MODULES; do
rmmod $MODULE >/dev/null 2>&1
wait `pidof rmmod`
done
# load Modules
for MODULE in $MODULES; do
modprobe $MODULE >/dev/null 2>&1
done
done

# clear TTY
if [ "$KEYB_TTY" != "" ]; then
clear > $KEYB_TTY
fi

Alles anzeigen

???