Beiträge von 9000H
-
-
Hi,
na da fehlt wohl die config in /var/lib/vdr/.avahi-mounter
ConfigParser.NoOptionError: No option 'media' in section: 'dir'
CU
9000h -
Hi,
die bisher besten Ergebnisse hatte ich mit der option in /etc/X11/xorg.conf
CodeOption "ColorSpace" "YCbCr444"und fuer xineliboutput
Codevideo.output.vdpau_studio_levels:1CU
9000h -
Hi,
das seltsame ist das ich mit pipe und/oder udp noch nie egal auf welcher Hardware Glück hatte.
CU
9000h -
Hi,
koennte die eingeblendete Taskleiste sein.
CU
9000h -
Hi,
hatte auch immer Probleme mit buffer overflows
ich hab dann in ein custon template 50_xineliboutput mit Inhalt
Codewhile ! netcat -z localhost 37890; do sleep 0.1; done; /usr/bin/vdr-sxfe $XINELIBOUTPUTOPTS --tcp xvdr+tcp://127.0.0.1:37890angelegt und seit dem hab ich keine overflows mehr.
CU
9000h -
Hi,
also das mit doppelten Eintraegen in der config_xineliboutput hatte ich schon, scheint so als ob da ein Script mit einem Template in /usr/share/yavdr/templates/etc/vdr-sxfe/config_xineliboutput was keinen Unterstrich im Namen hat nicht zurecht kommt.
CU
9000h -
-
Hi,
da fehlt ein Ausfuehrungszeichen im template xorg.conf.yavdr/0750device0-body
CodeOption "OnDemandVBlankinterrupts" "on sollte Option "OnDemandVBlankinterrupts" "on" seinCU
9000h -
Hi,
wie waere es mit dem:
5 in 1 Digital-Multimeter MASTECH MS8229
Bestellnummer: 830 271
CU
9000h -
-
Hi,
hab immer noch nicht verstanden wo die Firmware fuer die Karte zu finden ist.
Codehttp://powarman.dyndns.org/hgwebdir.cgi/dvbhddevice/rev/640011491743 That fixes not working video freeze. Firmware 0.2.5 is required.Firmware 0.2.5 ?
CU
9000h -
Hi,
yavdr 0.3 letzte updates, wenn der stremdev-sever pausiert kommt staendig
Code
Alles anzeigenFeb 7 23:02:42 yavdr0 vdr-sxfe[1561]: [1603] [input_vdr] wait_stream_sync: discard_index 169732976 != curpos 169732963 ! (diff 13) Feb 7 23:02:42 yavdr0 vdr-sxfe[1561]: [1597] [metronom ] Still frame, type 0 Feb 7 23:02:43 yavdr0 vdr-sxfe[1561]: last message repeated 19 times Feb 7 23:02:43 yavdr0 vdr-sxfe[1561]: [1603] [input_vdr] wait_stream_sync: discard_index 169863944 != curpos 169863931 ! (diff 13) Feb 7 23:02:43 yavdr0 vdr-sxfe[1561]: [1597] [metronom ] Still frame, type 0 Feb 7 23:02:44 yavdr0 vdr-sxfe[1561]: last message repeated 35 times Feb 7 23:02:44 yavdr0 vdr-sxfe[1561]: [1603] [input_vdr] wait_stream_sync: discard_index 170082224 != curpos 170082211 ! (diff 13) Feb 7 23:02:45 yavdr0 vdr-sxfe[1561]: [1597] [metronom ] Still frame, type 0 Feb 7 23:02:45 yavdr0 vdr-sxfe[1561]: last message repeated 11 times Feb 7 23:02:45 yavdr0 vdr-sxfe[1561]: [1603] [input_vdr] wait_stream_sync: discard_index 170169536 != curpos 170169523 ! (diff 13) Feb 7 23:02:45 yavdr0 vdr-sxfe[1561]: [1597] [metronom ] Still frame, type 0 Feb 7 23:02:45 yavdr0 vdr-sxfe[1561]: last message repeated 11 times Feb 7 23:02:45 yavdr0 vdr-sxfe[1561]: [1603] [input_vdr] wait_stream_sync: discard_index 170256848 != curpos 170256835 ! (diff 13) Feb 7 23:02:46 yavdr0 vdr-sxfe[1561]: [1597] [metronom ] Still frame, type 0CU
9000h -
Hi,
bei mir geht die TT CT-3650 nur mit s2-liplianin wenn ich folgenden Patch entferne. DVB-T scheint nicht dann nicht mehr zu gehen. Irgendwelche Ideen ?
patch -R ...
Diff
Alles anzeigen--- v4l-dvb-0~20101018.15139/linux/drivers/media/dvb/dvb-usb/ttusb2.c 2010-10-18 19:11:33.000000000 +0200 +++ s2-liplianin-0~20101016.14629/linux/drivers/media/dvb/dvb-usb/ttusb2.c 2010-10-16 15:01:29.000000000 +0200 @@ -31,6 +31,7 @@ #include "tda10086.h" #include "tda1002x.h" #include "tda827x.h" +#include "tda10048.h" #include "lnbp21.h" /* debug */ @@ -171,6 +172,13 @@ .deltaf = 0xa511, }; +static struct tda10048_config tda10048_config = { + .demod_address = 0x8, + .output_mode = TDA10048_PARALLEL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_50, + .inversion = TDA10048_INVERSION_ON, +}; + static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap) { if (usb_set_interface(adap->dev->udev,0,3) < 0) @@ -184,20 +192,51 @@ return 0; } +static int ttusb2_frontend_tda10048_attach(struct dvb_usb_adapter *adap) +{ + if (usb_set_interface(adap->dev->udev, 0, 3) < 0) + err("set interface to alts=3 failed"); + + adap->fe = dvb_attach(tda10048_attach, &tda10048_config, + &adap->dev->i2c_adap); + if (adap->fe == NULL) { + deb_info("TDA10048 attach failed\n"); + return -ENODEV; + } + + return 0; +} + static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap) { if (usb_set_interface(adap->dev->udev, 0, 3) < 0) err("set interface to alts=3 failed"); - if ((adap->fe = dvb_attach(tda10023_attach, &tda10023_config, &adap->dev->i2c_adap, 0x48)) == NULL) { + + adap->fe = dvb_attach(tda10023_attach, &tda10023_config, + &adap->dev->i2c_adap, 0x48); + if (adap->fe == NULL) { deb_info("TDA10023 attach failed\n"); return -ENODEV; } + + return 0; +} + +static int ttusb2_tuner_tda827x_61_attach(struct dvb_usb_adapter *adap) +{ + if (dvb_attach(tda827x_attach, adap->fe, + 0x61, &adap->dev->i2c_adap, NULL) == NULL) { + printk(KERN_ERR "%s: No tda827x found!\n", __func__); + return -ENODEV; + } + return 0; } -static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap) +static int ttusb2_tuner_tda827x_62_attach(struct dvb_usb_adapter *adap) { - if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL) { + if (dvb_attach(tda827x_attach, adap->fe, + 0x62, &adap->dev->i2c_adap, NULL) == NULL) { printk(KERN_ERR "%s: No tda827x found!\n", __func__); return -ENODEV; } @@ -354,13 +393,13 @@ .size_of_priv = sizeof(struct ttusb2_state), - .num_adapters = 1, + .num_adapters = 2, .adapter = { { .streaming_ctrl = NULL, .frontend_attach = ttusb2_frontend_tda10023_attach, - .tuner_attach = ttusb2_tuner_tda827x_attach, + .tuner_attach = ttusb2_tuner_tda827x_61_attach, /* parameter for the MPEG2-data transfer */ .stream = { @@ -376,6 +415,26 @@ } } }, + { + .streaming_ctrl = NULL, + + .frontend_attach = ttusb2_frontend_tda10048_attach, + .tuner_attach = ttusb2_tuner_tda827x_62_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_ISOC, + .count = 5, + .endpoint = 0x02, + .u = { + .isoc = { + .framesperurb = 4, + .framesize = 940, + .interval = 1, + } + } + } + } }, .power_ctrl = ttusb2_power_ctrl, @@ -388,7 +447,8 @@ .num_device_descs = 1, .devices = { { "Technotrend TT-connect CT-3650", - .warm_ids = { &ttusb2_table[3], NULL }, + { &ttusb2_table[3], NULL }, + { NULL }, }, } };
ohne CI IR patchCodeJan 17 22:20:15 yavdr0 kernel: [19299.084555] usb 1-1: new high speed USB device using ehci_hcd and address 14 Jan 17 22:20:16 yavdr0 kernel: [19299.733081] usb 1-1: configuration #1 chosen from 1 choice Jan 17 22:20:16 yavdr0 kernel: [19299.749391] dvb-usb: found a 'Technotrend TT-connect CT-3650' in warm state. Jan 17 22:20:16 yavdr0 kernel: [19299.750528] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Jan 17 22:20:16 yavdr0 kernel: [19299.750686] DVB: registering new adapter (Technotrend TT-connect CT-3650) Jan 17 22:20:16 yavdr0 kernel: [19299.759590] TDA10023: i2c-addr = 0x0c, id = 0x7d Jan 17 22:20:16 yavdr0 kernel: [19299.759602] DVB: registering adapter 3 frontend 0 (Philips TDA10023 DVB-C)... Jan 17 22:20:16 yavdr0 kernel: [19299.762025] dvb-usb: Technotrend TT-connect CT-3650 successfully initialized and connected. Jan 17 22:20:16 yavdr0 kernel: [19299.762086] usbcore: registered new interface driver dvb_usb_ttusb2mit CI IR patch "ct3650CI.diff"
Code[72834.690094] dvb-usb: found a 'Technotrend TT-connect CT-3650' in warm state. [72834.691855] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [72834.692062] DVB: registering new adapter (Technotrend TT-connect CT-3650) [72834.702738] TDA10023: i2c-addr = 0x0c, id = 0x7d [72834.708650] ttusb2: CI initialized. [72834.708660] DVB: registering adapter 3 frontend 0 (Philips TDA10023 DVB-C)... [72834.709499] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/input/input12 [72834.709625] dvb-usb: schedule remote query interval to 500 msecs. [72834.710109] dvb-usb: Technotrend TT-connect CT-3650 successfully initialized and connected. [72834.710157] usbcore: registered new interface driver dvb_usb_ttusb2
CU
9000h -
Hi,
hab den Treiber in v4l-dvb-0~20101018.15139 von yavdr 0.3a reingezaubert
CU
9000h -
Hi,
so hier mal ein Log von meinem Test
Code
Alles anzeigenJan 13 16:27:44 yavdr kernel: [ 9.853806] az6007: henry :: az6007 usb module init Jan 13 16:27:44 yavdr kernel: [ 9.863827] az6007: FW GET_VERSION length: 6 Jan 13 16:27:44 yavdr kernel: [ 9.863832] Jan 13 16:27:44 yavdr kernel: [ 9.863837] az6007: cold: 0 Jan 13 16:27:44 yavdr kernel: [ 9.863839] Jan 13 16:27:44 yavdr kernel: [ 9.863844] dvb-usb: found a 'TerraTec DTV StarBox DVB-T/C USB2.0 (az6007)' in warm state. Jan 13 16:27:44 yavdr kernel: [ 9.863966] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Jan 13 16:27:44 yavdr kernel: [ 9.864817] DVB: registering new adapter (TerraTec DTV StarBox DVB-T/C USB2.0 (az6007)) Jan 13 16:27:44 yavdr kernel: [ 9.874370] dvb-usb: MAC address: c2:cd:0c:xx:xx:xx Jan 13 16:27:44 yavdr kernel: [ 9.879278] az6007: az6007_frontend_poweron adap=ea0d2860 adap->dev=ea0d2000 Jan 13 16:27:45 yavdr kernel: [ 10.288339] az6007: az6007_frontend_poweron Jan 13 16:27:45 yavdr kernel: [ 10.288346] Jan 13 16:27:45 yavdr kernel: [ 10.288354] az6007: az6007_frontend_reset adap=ea0d2860 adap->dev=ea0d2000 Jan 13 16:27:45 yavdr kernel: [ 10.900054] az6007: reset az6007 frontend Jan 13 16:27:45 yavdr kernel: [ 10.900059] Jan 13 16:27:45 yavdr kernel: [ 10.900065] az6007: az6007_frontend_attach Jan 13 16:27:45 yavdr kernel: [ 10.900068] Jan 13 16:27:45 yavdr kernel: [ 10.900072] az6007: az6007_drxk3913_config_DVBC Jan 13 16:27:45 yavdr kernel: [ 10.900075] Jan 13 16:27:45 yavdr kernel: [ 10.900081] state->frontend.ops = drxk3913_ops_dvbc Jan 13 16:27:45 yavdr kernel: [ 10.900091] mt2063_attach: Attaching MT2063 Jan 13 16:27:45 yavdr kernel: [ 10.900097] az6007: found STB6100 DVB-C/DVB-T frontend @0xc0 Jan 13 16:27:45 yavdr kernel: [ 10.900100] Jan 13 16:27:45 yavdr kernel: [ 10.900110] DVB: registering adapter 0 frontend 0 (DRXK3913 Multistandard DVB_C)... Jan 13 16:27:45 yavdr kernel: [ 10.900514] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:06.1/usb2/2-1/input/input7 Jan 13 16:27:45 yavdr kernel: [ 10.900722] dvb-usb: schedule remote query interval to 400 msecs. Jan 13 16:27:45 yavdr kernel: [ 10.900736] dvb-usb: TerraTec DTV StarBox DVB-T/C USB2.0 (az6007) successfully initialized and connected. Jan 13 16:27:45 yavdr kernel: [ 10.900836] usbcore: registered new interface driver dvb_usb_az6007 Jan 13 16:27:47 yavdr kernel: [ 12.475902] drx3913: wakeupDevice Jan 13 16:27:47 yavdr kernel: [ 12.475908] Jan 13 16:27:47 yavdr kernel: [ 12.475914] drx3913: Jan 13 16:27:47 yavdr kernel: [ 12.670399] drx3913: DRXX_open(demod) Jan 13 16:27:47 yavdr kernel: [ 12.670405] Jan 13 16:27:47 yavdr kernel: [ 12.734635] drx3913: Jan 13 16:27:58 yavdr kernel: [ 23.490491] drx3913: success: re-configured MPEG output Jan 13 16:27:58 yavdr kernel: [ 23.490497] Jan 13 16:27:59 yavdr kernel: [ 24.667374] ########### DVBC MicronasSetTune channel.frequency = 113000, channel.bandwidth = 0 Jan 13 16:27:59 yavdr kernel: [ 24.667389] drx3913: MicronasSetTune 2748 fe=eb7f9008 Jan 13 16:27:59 yavdr kernel: [ 24.667393] Jan 13 16:27:59 yavdr kernel: [ 24.912399] drx3913: set_tuner DVBC frequency=113000 bandwidth=0 Jan 13 16:27:59 yavdr kernel: [ 24.912404] Jan 13 16:28:00 yavdr kernel: [ 25.418275] drx3913: channel programmed... waiting for lock Jan 13 16:28:00 yavdr kernel: [ 25.418282] Jan 13 16:28:00 yavdr kernel: [ 25.714334] ^_^ ^_^ ^_^ ^_^ ^_^ drxk39xx has locked!!!es gibt nen Lock und Bild im VDR aber es ist nicht stabil.
CU
9000h -
Hi,
der Linuxtreiber von Terratec ist scheint prinzipiell zu funktionieren es hat aber die Firmware gefehlt, wenn ich Zeit habe mehr dazu.
CU
9000h -
Hi,
fuer alle die nach der Firmware suchen.
CU
9000h -
Hi,
hab das auch im log
CodeJan 11 22:47:11 yavdr0 vdr: [19152] receiver on device 10 thread started (pid=18947, tid=19152) Jan 11 22:47:11 yavdr0 vdr: [19152] ERROR: Cannot execute script! Jan 11 22:47:11 yavdr0 vdr: [19152] [xine..put] Detected video size 432x240 Jan 11 22:47:37 yavdr0 vdr: [19152] [xine..put] cXinelibServer::Play Buffer overflow (TCP/PIPE) Jan 11 22:47:49 yavdr0 vdr: [19152] receiver on device 10 thread ended (pid=18947, tid=19152)CU
9000h -
