hallo,
alsooooo nun mal wieder ich ...
ich habe nun wieder unendliche versuche mit den unterschiedlichsten Treibern gemacht (radeon,vesa,fglrx), aber es funkt immer noch nicht richtig...
leider kann ich die beschriebene Ausgabe nicht mehr reproduzieren,aber egal, war ja eh nicht so toll ...
nun habe ich mit dem fglrx (aktuelle version 8.25.18-x86 von ati) so einigermaßen Erfolg, der xserver läuft ohne zu "zappeln" in 800x600@60 mode
das Bild vom softdevice geht auch so einigermaßen, die Systemlast geht durch "die Decke", nur das die "Füße" im Bild fehlen ist nun nicht mehr zu tolerieren :-((
also nochmal, mit der Maus finde ich die 800X600 auf meinen Fernseher (es bleibt noch ein kleiner Trauerrand, aber das wäre ok), das sichbare Bild vom softdevice ist dann etwas kleiner, eben so 768x576 auch nicht so toll aber ok
nur innerhalb der 768x576 fehlt ein guter Teil des Bildes von unten
nun zu meinen Daten:
ATI Technologies Inc RV280 [Radeon 9200 PRO] am S-Video TV-OUT
Treiber fglrx 8.25.18-x86
softdevice-cvs (0.2.2) gestartet mit ... -P "softdevice -vo xv:aspect=normal"
/etc/vdr/setup.conf
[...]
softdevice.AC3Mode = 0
softdevice.AlsaAC3Device = hw:0,1
softdevice.AlsaDevice = default
softdevice.avOffset = 0
softdevice.bufferMode = 0
softdevice.CropBottomLines = 0
softdevice.CropLeftCols = 0
softdevice.CropMode = 1
softdevice.CropModeToggleKey = 0
softdevice.CropRightCols = 0
softdevice.CropTopLines = 0
softdevice.Deinterlace Method = 0
softdevice.mainMenu = 0
softdevice.OSDalphablend = 1
softdevice.Picture mirroring = 0
softdevice.PixelAspect = 0
softdevice.PixelFormat = 0
softdevice.Postprocess Method = 0
softdevice.Postprocess Quality = 0
softdevice.Suspend = 0
softdevice.syncTimerMode = 2
softdevice.UseStretchBlit = 0
softdevice.vidBrightness = 45
softdevice.vidContrast = 50
softdevice.vidHue = 50
softdevice.vidSaturation = 50
softdevice.Xv-Aspect = 1
nochmal aus der syslog:
Jun 11 19:06:24 vdr vdr: [1216] VDR version 1.3.44 started
Jun 11 19:06:24 vdr vdr: [1216] Bigpatch 03.03.2006 is active!
Jun 11 19:06:24 vdr vdr: [1216] loading plugin: /usr/lib/vdr//libvdr-softdevice.so.1.3.44
[.....]
Jun 11 19:06:25 vdr kernel: [fglrx] AGP detected, AgpState = 0x1f000217 (hardware caps of chipset)
Jun 11 19:06:25 vdr kernel: agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Jun 11 19:06:25 vdr kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Jun 11 19:06:25 vdr kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Jun 11 19:06:25 vdr kernel: [fglrx] AGP enabled, AgpCommand = 0x1f000314 (selected caps)
Jun 11 19:06:26 vdr kernel: [fglrx] total GART = 134217728
Jun 11 19:06:26 vdr kernel: [fglrx] free GART = 118222848
Jun 11 19:06:26 vdr kernel: [fglrx] max single GART = 118222848
Jun 11 19:06:26 vdr kernel: [fglrx] total LFB = 130117632
Jun 11 19:06:26 vdr kernel: [fglrx] free LFB = 126173184
Jun 11 19:06:26 vdr kernel: [fglrx] max single LFB = 126173184
Jun 11 19:06:26 vdr kernel: [fglrx] total Inv = 0
Jun 11 19:06:26 vdr kernel: [fglrx] free Inv = 0
Jun 11 19:06:26 vdr kernel: [fglrx] max single Inv = 0
Jun 11 19:06:26 vdr kernel: [fglrx] total TIM = 0
Jun 11 19:06:26 vdr vdr: [1216] probing /dev/dvb/adapter0/frontend0
Jun 11 19:06:26 vdr vdr: [1216] found 1 video device
Jun 11 19:06:26 vdr vdr: [1216] initializing plugin: softdevice (0.2.2): A software emulated MPEG2 device
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: patch version (2006-02-05)
Jun 11 19:06:26 vdr vdr: [1221] tuner on device 1 thread started (pid=1216, tid=1221)
Jun 11 19:06:26 vdr vdr: [1222] section handler thread started (pid=1216, tid=1222)
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: Initialize XShmCreateImage Successful (0x8a6f700)
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: Initialize shmget Successful (1843200 bytes)
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: Initialize shmat Successful
Jun 11 19:06:26 vdr vdr: [1216] [softdevice-xscreensaver]: xscreensaver not running
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: initialized OK
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: ATI Radeon Video Overlay: available ports 67 - 67
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: grabbed port 67
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: max area size 2048 x 2048
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: using area size 736 x 576
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: XV_SET_DEFAULTS NOT-XvGettable XvSettable (
0 [0x00000000] - 1 [0x00000001]) ( 0 [0x00000000]
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: XV_AUTOPAINT_COLORKEY XvGettable XvSettable (
0 [0x00000000] - 1 [0x00000001]) ( 1 [0x00000001]
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: XV_COLORKEY XvGettable XvSettable (
0 [0x00000000] - -1 [0xffffffff]) ( 30 [0x0000001e]
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: XV_DOUBLE_BUFFER XvGettable XvSettable (
0 [0x00000000] - 1 [0x00000001]) ( 1 [0x00000001]
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: XV_BRIGHTNESS XvGettable XvSettable ( -1
000 [0xfffffc18] - 1000 [0x000003e8]) ( 0 [0x00000000]
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: XV_CONTRAST XvGettable XvSettable ( -1
000 [0xfffffc18] - 1000 [0x000003e8]) ( 0 [0x00000000]
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: XV_SATURATION XvGettable XvSettable ( -1
000 [0xfffffc18] - 1000 [0x000003e8]) ( 0 [0x00000000]
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: XV_COLOR XvGettable XvSettable ( -1
000 [0xfffffc18] - 1000 [0x000003e8]) ( 0 [0x00000000]
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: XV_HUE XvGettable XvSettable ( -1
000 [0xfffffc18] - 1000 [0x000003e8]) ( 0 [0x00000000]
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: XV_RED_INTENSITY XvGettable XvSettable ( -1
000 [0xfffffc18] - 1000 [0x000003e8]) ( 0 [0x00000000]
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: XV_GREEN_INTENSITY XvGettable XvSettable ( -1
000 [0xfffffc18] - 1000 [0x000003e8]) ( 0 [0x00000000]
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: XV_BLUE_INTENSITY XvGettable XvSettable ( -1
000 [0xfffffc18] - 1000 [0x000003e8]) ( 0 [0x00000000]
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: XvShmCreateImage Successful (0x8a6ffd8)
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: shmget Successful (847872 bytes)
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: shmat Successful
Jun 11 19:06:26 vdr vdr: [1216] [XvVideoOut]: XShmAttach rc = 1 (should be OK)
Jun 11 19:06:26 vdr vdr: [1216] [softdevice] videoOut OK !
Jun 11 19:06:26 vdr vdr: [1216] [softdevice-audio] Opening alsa device default
Jun 11 19:06:26 vdr vdr: [1216] [softdevice-audio] Using alsa AC3 device hw:0,1
Jun 11 19:06:26 vdr vdr: [1225] Xv remote control thread started (pid=1216)
Jun 11 19:06:26 vdr vdr: [1216] [softdevice-audio] Device opened! Ready to play
Jun 11 19:06:26 vdr vdr: [1231] radiocheck thread started (pid=1216, tid=1231)
Jun 11 19:06:26 vdr vdr: [1232] LIRC remote control thread started (pid=1216, tid=1232)
Jun 11 19:06:26 vdr vdr: [1233] KBD remote control thread started (pid=1216, tid=1233)
Jun 11 19:06:26 vdr vdr: [1234] ecmhandler 0 filter thread started (pid=1216, tid=1234)
Jun 11 19:06:26 vdr vdr: [1235] transfer thread started (pid=1216, tid=1235)
Jun 11 19:06:26 vdr vdr: [1236] receiver on device 1 thread started (pid=1216, tid=1236)
Jun 11 19:06:26 vdr vdr: [1239] TS buffer on device 1 thread started (pid=1216, tid=1239)
Jun 11 19:06:27 vdr vdr: [1241] logger stats thread started (pid=1216, tid=1241)
Jun 11 19:06:27 vdr vdr: [1242] logger 0 filter thread started (pid=1216, tid=1242)
Jun 11 19:06:27 vdr vdr: [1223] [VideoOut]: 736x576 [8,0 720x576] -> 768x576 [0,4 768x567]
Jun 11 19:06:27 vdr vdr: [1223] [VideoOut]: 736x576 [8,0 720x576] -> 768x576 [0,4 768x567]
Jun 11 19:06:27 vdr vdr: serdisp: SerDisp with hp12542r initialized.
Jun 11 19:06:27 vdr vdr: [1228] graphlcd plugin: Display update thread started (pid=1216)
Jun 11 19:06:28 vdr vdr: [1235] setting audio track to 1 (0)
Jun 11 19:06:28 vdr vdr: [1223] [VideoOut]: 736x576 [8,0 720x576] -> 768x576 [0,4 768x567]
Jun 11 19:06:28 vdr vdr: [1243] [VideoOut]: resolution changed: W(736 -> 704); H(576 ->576)
Jun 11 19:06:28 vdr vdr: [1243] [VideoOut]: aspect changed (0 -> 0 ; 1.366667 -> 1.333333)
Jun 11 19:06:28 vdr vdr: [1243] [VideoOut]: 704x576 [0,0 704x576] -> 768x576 [0,4 768x567]
Jun 11 19:06:28 vdr vdr: [1244] [softdevice-audio] samplerate: 48000Hz, channels: #2
Jun 11 19:06:28 vdr vdr: [1244] [softdevice-audio] Period size 1024 Buffer size 16384
Jun 11 19:06:28 vdr vdr: [1244] [softdevice-audio] Hardware initialized
Jun 11 19:06:30 vdr vdr: [1216] retuning due to modification of channel 2
Jun 11 19:06:30 vdr vdr: [1216] switching to channel 2
Jun 11 19:06:30 vdr vdr: [1235] transfer thread ended (pid=1216, tid=1235)
Jun 11 19:06:30 vdr vdr: [1236] receiver on device 1 thread ended (pid=1216, tid=1236)
Jun 11 19:06:30 vdr vdr: [1216] cTS2PES got 0 TS errors, 1 TS continuity errors
Jun 11 19:06:30 vdr vdr: [1216] buffer stats: 36472 (1%) used
Jun 11 19:06:30 vdr vdr: [1282] transfer thread started (pid=1216, tid=1282)
Jun 11 19:06:30 vdr vdr: [1283] receiver on device 1 thread started (pid=1216, tid=1283)
Jun 11 19:06:30 vdr vdr: [1223] [VideoOut]: 704x576 [0,0 704x576] -> 768x576 [0,4 768x567]
Jun 11 19:06:30 vdr vdr: [1223] [VideoOut]: resolution changed: W(704 -> 736); H(576 ->576)
Jun 11 19:06:31 vdr vdr: [1282] setting audio track to 1 (0)
Jun 11 19:06:31 vdr vdr: [1285] [VideoOut]: resolution changed: W(736 -> 704); H(576 ->576)
Jun 11 19:06:31 vdr vdr: [1285] [VideoOut]: 704x576 [0,0 704x576] -> 768x576 [0,4 768x567]
Jun 11 19:06:31 vdr vdr: [1286] [softdevice-audio]: xrun
Jun 11 19:06:32 vdr vdr: [1216] assuming manual start of VDR
und hier noch was von der konsole:
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: SuSE Linux [ELF] SuSE
Current Operating System: Linux vdr 2.6.13-15.7-default #1 Tue Nov 29 14:32:29 UTC 2005 i686
Build Date: 12 September 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Sun Jun 11 19:44:59 2006
(++) Using config file: "/etc/X11/xorg.conf"
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
warning: commands will be executed using /bin/sh
job 495 at 2006-06-11 19:47
vdr: missing plugin 'graphlcd'
[softdevice] processing args
[softdevice] argv [0] = softdevice
[softdevice] argv [1] = -vo
vo_argv: xv:aspect=normal
[ProcessArgs] xv: startup aspect ratio set to normal (4:3)
[...]
[setup-softdevice] alsa ac3Mode set to: 0
[setup-softdevice] alsa AC3 device set to: hw:0,1
[setup-softdevice] alsa device set to: default
[setup-softdevice] A/V Offset set to (0)
[setup-softdevice] Cropping 0 lines from bottom
[setup-softdevice] Cropping 0 columns from left
[setup-softdevice] cropping mode set to 1 (4:3)
[setup-softdevice] cropping mode toggle key set to 0 (none)
[setup-softdevice] Cropping 0 columns from right
[setup-softdevice] Cropping 0 lines from top
[setup-softdevice] deinterlace method set to 0 none
[setup-softdevice] mainMenu: 0
[setup-softdevice] setting alpha blend mode to software
[softdevice] picture mirroring set to 0 (off)
[setup-softdevice] pixel format set to (I420)
[setup-softdevice] shouldSuspend to: 0
[setup-softdevice] syncTimerMode: sig
[softdevice] UseStretchBlitset to off
[setup-softdevice] vidBrightness: 45
[setup-softdevice] vidContrast: 50
[setup-softdevice] vidHue: 50
[setup-softdevice] vidSaturation: 50
[setup-softdevice] startup aspect set to (4:3 normal)
[softdevice] initializing Plugin
[softdevice] Initializing Video Out
[softdevice] ffmpeg version(CVS) build(3342336)
expected keysym, got dead_diaresis: line 144 of de
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Could not init font path element /usr/X11R6/lib/X11/fonts/local, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/CID, removing from list!
[XvVideoOut]: displayAspect = 1,311688, displayRatio = 1,333333, PAR = 0,983766
[XvVideoOut]: osd_image shmid = 6946820
[XvVideoOut]: got osd_image: width 800 height 600, bytes per line 3200
[XvVideoOut]: max area size 2048 x 2048
[XvVideoOut]: using area size 736 x 576
[softdevice] Subplugin successfully opend
[softdevice] Video Out seems to be OK
[softdevice] Initializing Audio Out
[softdevice] Audio out seems to be OK
[softdevice] A/V devices initialized, now initializing MPEG2 Decoder
[...]
[mpeg2video @ 0x40753408]mb incr damaged
[mpeg2video @ 0x40753408]Warning MVs not available
[mpeg2video @ 0x40753408]concealing 264 DC, 264 AC, 264 MV errors
ich hoffe jemand kann damit was anfangen ....
danke schon mal