Beiträge von cupressus

Seltsam. Hatte ich gestern auf 5 gestellt. Heute steht wieder 0 drin. Habe aber nichts gemacht außer neu gestartet. Aber egal es funktioniert jetzt alles wie es soll.

Danke für den Hinweis. Hatte da (in setup. conf) 0 stehen. Auf 5 geändert und jetzt funktioniert es.

Ich habe versucht diverse Sender mit dem vdr osd zu löschen. Geht aber nicht

beim nächsten Start sind alle wieder da. Was mache ich falsch?

ASUS Cerberus-GTX1050TI-A4G Gaming Grafikkarte (Nvidia, PCIe 3.0, 4GB GDDR5

Zitat von cupressus

Hallo,

vielen Dank für die Rückmeldungen. Mittlerweile läuft der VDR wieder anstandslos aber halt ohne UHD. Werde mir eine neue Grafikkarte kaufen - habe da die Nividea GT 1050 ins Auge gefasst. Werde damit aber warten bis die Grafikkarten wieder ein erschwingliches Niveau erreichen.

Hi,

grafikkarte ist gekommen und eingebaut. Linux und vdr neu installiert. UHD getestet mit xineliboutput-plugin.

Läuft super. Völlig flüssig ohne Ruckler oder Artefakte. CPU Auslastung 5%, GPU 23%.

Zitat von SurfaceCleanerZ

Warum nutzt du denn dann keine fertige Distribution wie yavdr ansible Focal oder easyvdr v5? Sind doch Ubuntu basiert

Hab ich beide schon probiert. Aber keines der angebotenen Images hat funktioniert. Haben nicht gebootet.

Zitat von SurfaceCleanerZ

Hi,

Dir fehlen diverse Pakete, wie angemeckert. Aber hauptsächlich X11, Hast du vorher softhddrm versucht? Ohne X wird das nix mit Ubuntu und Softhddevice. Wahrscheinlich musst du noch dev an den Paketnamen ergänzen.

Warum versuchst du es nicht mit fertigen Paketen? Yavdr hat doch fertige Ubuntu Pakete. Wahrscheinlich hast du damit mehr schnelleren Erfolg. Die sollten gehen.

Aber zuerst wie gesagt X11...

Mfg Stefan

Hab ich ja versucht aber diese ganzen Abhängikeiten aufzulösen schaffe ich nicht. Bräuchte eine Schritt für Schritt Anleitung. Bin Linux Anfänger.

danke für den Tipp, versuche jetzt gerade softhddevice zu installieren aber bisher ohne Erfolg.

ich habe den vdr im Moment mit xinliboutput perfekt am laufen. Aber der kann kein UHD deshalb wollte ich mal softhddevice probieren.

Hallo,

versuche gerade das plugin softhddvevice zu installieren aber ich bekomme es nicht installierten.

make eingegeben und dann kommt folgende elendslange Fehlermeldung. Was mache ich Falsch.

alois@linuxpc:~/vdr-plugin-softhddevice$ make

Package xcb-screensaver was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-screensaver.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-screensaver' found

Package xcb-dpms was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-dpms.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-dpms' found

Package libavcodec was not found in the pkg-config search path.

Perhaps you should add the directory containing `libavcodec.pc'

to the PKG_CONFIG_PATH environment variable

No package 'libavcodec' found

Package x11 was not found in the pkg-config search path.

Perhaps you should add the directory containing `x11.pc'

to the PKG_CONFIG_PATH environment variable

No package 'x11' found

Package x11-xcb was not found in the pkg-config search path.

Perhaps you should add the directory containing `x11-xcb.pc'

to the PKG_CONFIG_PATH environment variable

No package 'x11-xcb' found

Package xcb was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb' found

Package xcb-icccm was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-icccm.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-icccm' found

Package xcb-screensaver was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-screensaver.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-screensaver' found

Package xcb-dpms was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-dpms.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-dpms' found

Package libavcodec was not found in the pkg-config search path.

Perhaps you should add the directory containing `libavcodec.pc'

to the PKG_CONFIG_PATH environment variable

No package 'libavcodec' found

Package x11 was not found in the pkg-config search path.

Perhaps you should add the directory containing `x11.pc'

to the PKG_CONFIG_PATH environment variable

No package 'x11' found

Package x11-xcb was not found in the pkg-config search path.

Perhaps you should add the directory containing `x11-xcb.pc'

to the PKG_CONFIG_PATH environment variable

No package 'x11-xcb' found

Package xcb was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb' found

Package xcb-icccm was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-icccm.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-icccm' found

Package xcb-screensaver was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-screensaver.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-screensaver' found

Package xcb-dpms was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-dpms.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-dpms' found

Package libavcodec was not found in the pkg-config search path.

Perhaps you should add the directory containing `libavcodec.pc'

to the PKG_CONFIG_PATH environment variable

No package 'libavcodec' found

Package x11 was not found in the pkg-config search path.

Perhaps you should add the directory containing `x11.pc'

to the PKG_CONFIG_PATH environment variable

No package 'x11' found

Package x11-xcb was not found in the pkg-config search path.

Perhaps you should add the directory containing `x11-xcb.pc'

to the PKG_CONFIG_PATH environment variable

No package 'x11-xcb' found

Package xcb was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb' found

Package xcb-icccm was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-icccm.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-icccm' found

/bin/sh: 1: cannot create .dependencies: Permission denied

Package xcb-screensaver was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-screensaver.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-screensaver' found

Package xcb-dpms was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-dpms.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-dpms' found

Package libavcodec was not found in the pkg-config search path.

Perhaps you should add the directory containing `libavcodec.pc'

to the PKG_CONFIG_PATH environment variable

No package 'libavcodec' found

Package x11 was not found in the pkg-config search path.

Perhaps you should add the directory containing `x11.pc'

to the PKG_CONFIG_PATH environment variable

No package 'x11' found

Package x11-xcb was not found in the pkg-config search path.

Perhaps you should add the directory containing `x11-xcb.pc'

to the PKG_CONFIG_PATH environment variable

No package 'x11-xcb' found

Package xcb was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb' found

Package xcb-icccm was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-icccm.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-icccm' found

g++ -g -O2 -fdebug-prefix-map=/build/vdr-n1c7FH/vdr-2.4.1=. -fstack-protector-strong -Wformat -Werror=format-security -fPIC -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DPLUGIN_NAME_I18N='"softhddevice"' -D_GNU_SOURCE -DAV_INFO -DAV_INFO_TIME=3000 -DUSE_PIP -DUSE_MPEG_COMPLETE -DH264_EOS_TRICKSPEED -DUSE_VDR_SPU -DUSE_OSS -DUSE_SCREENSAVER -DGIT_REV='"6dfa88a"' -g -W -Wall -Wextra -Winit-self -Werror=overloaded-virtual -c -o softhddevice.o softhddevice.cpp

Package xcb-screensaver was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-screensaver.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-screensaver' found

Package xcb-dpms was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-dpms.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-dpms' found

Package libavcodec was not found in the pkg-config search path.

Perhaps you should add the directory containing `libavcodec.pc'

to the PKG_CONFIG_PATH environment variable

No package 'libavcodec' found

Package x11 was not found in the pkg-config search path.

Perhaps you should add the directory containing `x11.pc'

to the PKG_CONFIG_PATH environment variable

No package 'x11' found

Package x11-xcb was not found in the pkg-config search path.

Perhaps you should add the directory containing `x11-xcb.pc'

to the PKG_CONFIG_PATH environment variable

No package 'x11-xcb' found

Package xcb was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb' found

Package xcb-icccm was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-icccm.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-icccm' found

Package xcb-screensaver was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-screensaver.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-screensaver' found

Package xcb-dpms was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-dpms.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-dpms' found

Package libavcodec was not found in the pkg-config search path.

Perhaps you should add the directory containing `libavcodec.pc'

to the PKG_CONFIG_PATH environment variable

No package 'libavcodec' found

Package x11 was not found in the pkg-config search path.

Perhaps you should add the directory containing `x11.pc'

to the PKG_CONFIG_PATH environment variable

No package 'x11' found

Package x11-xcb was not found in the pkg-config search path.

Perhaps you should add the directory containing `x11-xcb.pc'

to the PKG_CONFIG_PATH environment variable

No package 'x11-xcb' found

Package xcb was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb' found

Package xcb-icccm was not found in the pkg-config search path.

Perhaps you should add the directory containing `xcb-icccm.pc'

to the PKG_CONFIG_PATH environment variable

No package 'xcb-icccm' found

softhddevice.cpp:43:10: fatal error: libavcodec/avcodec.h: Datei oder Verzeichnis nicht gefunden

43 | #include <libavcodec/avcodec.h>

| ^~~~~~~~~~~~~~~~~~~~~~

compilation terminated.

make: *** [<eingebaut>: softhddevice.o] Fehler 1

Betriebssystem: Linux Mint 20.1

Grafikkarte: radeon 5500 xt 8gb

Was mache ich falsch?

Peinlich, habe vergessen den VDR zu stoppen

Hallo,

habe jetzt ein Problem mit dem vdr-manager kann das plugin nicht bauen. Folgende Fehlermeldung wird angezeigt:

alois@linuxpc:~/vdr-manager/vdr-vdrmanager$ make

xgettext -C -cTRANSLATORS --no-wrap --no-location -k -ktr -ktrNOOP --package-name=vdr-vdrmanager --package-version=0.15 --msgid-bugs-address='<see README>' -o po/vdrmanager.pot `ls handler.cpp select.cpp vdrmanager.cpp clientsock.cpp sock.cpp vdrmanagerthread.cpp compressor.cpp helpers.cpp serversock.cpp`

Hat unter linux mint 19.3 klaglos funktioniert aber ich habe jetzt den Linux PC mit Mint 20.1 aufgesetzt und jetzt funktioniet die Installation nicht mehr

Bitte um Hilfe!

Trotzdem stellt sich mir die Frage warum es Kaffeine schafft?

Hallo,

vielen Dank für die Rückmeldungen. Mittlerweile läuft der VDR wieder anstandslos aber halt ohne UHD. Werde mir eine neue Grafikkarte kaufen - habe da die Nividea GT 1050 ins Auge gefasst. Werde damit aber warten bis die Grafikkarten wieder ein erschwingliches Niveau erreichen.

neueste Versionen sind installiert. Schade dann muss ich bei Kaffeine bleiben. UHD brauche ich einfach. Mit der alten Grafikkarte hat alles bestens funktioniert. Tolle Software nur schade dass UHD nicht geht.

Hallo,

so jetzt habe ich alles nochmals installiert. Mit linux Mint 19.3 ließ sich der Treiber nicht sauber installieren. Aber mit Linus Mint 20.1 lief die Treiberinstallation fehlerfrei durch. Auch hier laufen die UHD Programme mit Kaffeine völlig flüssig. Warum schafft das Vdr nicht.

Am Treiber kanns nicht liegen sonst würde es ja mit Kaffeine auch nicht gehen.

Wer kann weiterhelfen.

Folgende Fehlermeldung wird angezeigt:

alois@linux-win:~$ vdr-sxfe

vdr-sxfe 2.1.0 (build with xine-lib 1.2.9, using xine-lib 1.2.9)

VDR server not given, searching ...

---------------------------------------------------------------

WARNING: MRL not given and server not found from local network.

Trying to connect to default port on local host.

---------------------------------------------------------------

[1830] [scrnsaver] GNOME screensaver disabled

[1830] [vdr-fe] WARNING: no video driver given. Trying OpenGL2.

[1830] [vdr-fe] Detected 12 CPUs

[1830] [vdr-fe] Enabling FFmpeg multithreaded video decoding

[1830] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...

[1830] [input_vdr] Can't connect to tcp://127.0.0.1:37890

[1830] [input_vdr] (ERROR (xine_input_vdr.c,5383): Operation now in progress)

[1830] [input_vdr] Can't connect to tcp://127.0.0.1:37890

[1830] [input_vdr] (ERROR (xine_input_vdr.c,5831): Operation now in progress)

[1830] [input_vdr] Connections closed.

[1830] [vdr-fe] fe_xine_open: xine_open("xvdr://127.0.0.1#nocache") failed

Error opening xvdr://127.0.0.1

[1830] [scrnsaver] GNOME screensaver enabled

alois@linux-win:~$

Die alte war eine Nividia Geoforce GT710 sie war für HD ausreichend konnte aber nicht UHD.

Hallo,

bin am verzweifeln. Habe neue Grafikkarte eingebaut seitdem funktioniert VDR nicht mehr.

Mit Kaffeine läuft alles bestens, selbst UHD Sender laufen völlig flüssig und mit geringster CPU Last.

linux mint:20.1

ausgabe-plugin: sxfe

Graphics:  
Device-1: AMD Navi 14 [Radeon RX 5500/5500M / Pro 5500M] vendor: Micro-Star MSI 
          driver: amdgpu v: 5.9.10.20.50 bus ID: 0a:00.0 chip ID: 1002:7340           
          Display: x11 server: X.Org 1.20.9 driver: amdgpu,ati   
          unloaded: fbdev,modesetting,radeon,vesa resolution: 1920x1080~60Hz  
          OpenGL: renderer: Radeon RX 5500 XT (NAVI14 DRM 3.40.0 5.4.0-73-generic LLVM 11.0.1) 
          v: 4.6 Mesa 20.2.4 direct render: Yes

Hi,

xineliboutput

sxfe