Thanks this helps! If I now get a xmltv file to play with I should be ready to go.
Beiträge von corvy
-
-
haraldov thank you
I contact Honeybee to get a demo xmltv file to try to set this up. This exact process I followed to get xmltv.se to work but I could never get the "use the vdr osd to map the channel id to the vdr channel names and setup the information you want to import" to work. I could not for the life of me understand how this was done.
Lets see if Honeybee gives me an xmltv to play with
-
haraldov That sounds amazing! Am and not afraid of paying for a service if it works reliably. If you could give me some pointers in e-mail or similar I would be happy! My email is stian ATT barmen DOTT nu.
On a sidenote I got help from Klaus Schmidinger on e-mail and he is looking into the issue. I think both ways with Honeybee and proper EPG fix would be grand!
Thanks for all help from all that responded
-
-
Thank again I will leave it on FOX for a while and see. My logs look interesting at least
Code
Alles anzeigenNov 13 14:17:04 timeshift vdr: [31973] VNSI: Started streaming of channel FOX HD (timeout 10 seconds) Nov 13 14:17:04 timeshift vdr: [32350] device 1 receiver thread started (pid=30092, tid=32350, prio=high) Nov 13 14:17:04 timeshift vdr: [32353] device 1 TS buffer thread started (pid=30092, tid=32353, prio=high) Nov 13 14:17:04 timeshift vdr: [32351] VNSI: Created stream for pid=1261 and type=8 Nov 13 14:17:04 timeshift vdr: [32351] VNSI: Created stream for pid=3347 and type=2 Nov 13 14:17:05 timeshift vdr: [30097] EEPG: setstatus 0 Nov 13 14:17:05 timeshift vdr: [30097] EEPG: setstatus 1 Nov 13 14:17:05 timeshift vdr: [30097] EEPG: Filter Pid:0x0,Tid:0x0 added. Nov 13 14:17:05 timeshift vdr: [32351] VNSI: Audio stream change, pid: 3347, channels: 2, samplerate: 48000 Nov 13 14:17:05 timeshift vdr: [30097] EEPG: PMT scan idle Nov 13 14:17:05 timeshift vdr: [30097] EEPG: Ended all processing Nov 13 14:17:05 timeshift vdr: [32351] VNSI: Video stream change, pid: 1261, width: 1920, height: 1080, aspect: 1,777778 Nov 13 14:17:07 timeshift vdr: [32370] cAddEEPGEventThread thread started (pid=30092, tid=32370, prio=high) Nov 13 14:17:07 timeshift vdr: [32370] --- begin invalid lock sequence report Nov 13 14:17:07 timeshift vdr: [32370] 30103 - W - - - - - - - - L Nov 13 14:17:07 timeshift vdr: [32370] 30103 - * - - W - - - - - L Nov 13 14:17:07 timeshift vdr: [32370] 30103 - * - - U - - - - - U Nov 13 14:17:07 timeshift vdr: [32370] 30103 - U - - - - - - - - U Nov 13 14:17:07 timeshift vdr: [32370] 30100 - W - - - - - - - - L Nov 13 14:17:07 timeshift vdr: [32370] 30100 - * - - W - - - - - L Nov 13 14:17:07 timeshift vdr: [32370] 30100 - * - - U - - - - - U Nov 13 14:17:07 timeshift vdr: [32370] 30100 - U - - - - - - - - U Nov 13 14:17:07 timeshift vdr: [32370] 30106 - W - - - - - - - - L Nov 13 14:17:07 timeshift vdr: [32370] 30106 - * - - W - - - - - L Nov 13 14:17:07 timeshift vdr: [32370] 30106 - * - - U - - - - - U Nov 13 14:17:07 timeshift vdr: [32370] 30106 - U - - - - - - - - U Nov 13 14:17:07 timeshift vdr: [32370] 32351 - - - - R - - - - - L Nov 13 14:17:07 timeshift vdr: [32370] 32351 - - - - U - - - - - U Nov 13 14:17:07 timeshift vdr: [32370] 30097 - W - - - - - - - - L Nov 13 14:17:07 timeshift vdr: [32370] 30097 - * - - W - - - - - L Nov 13 14:17:07 timeshift vdr: [32370] 30097 - * - - U - - - - - U Nov 13 14:17:07 timeshift vdr: [32370] 30097 - U - - - - - - - - U Nov 13 14:17:07 timeshift vdr: [32370] 32370 - - - - W - - - - - L Nov 13 14:17:07 timeshift vdr: [32370] 32370 - R - - * - - - - - L Nov 13 14:17:07 timeshift vdr: [32370] 32370 invalid lock sequence: 2 Channels Nov 13 14:17:07 timeshift vdr: [32370] full backtrace: Nov 13 14:17:08 timeshift vdr: [32370] /usr/local/bin/vdr cStateLock::Lock(cStateKey&, bool, int) calling ?? at ??:0 Nov 13 14:17:08 timeshift vdr: [32370] /usr/local/bin/vdr cChannels::GetChannelsRead(cStateKey&, int) calling ?? at ??:0 Nov 13 14:17:08 timeshift vdr: [32370] /usr/local/lib/vdr/libvdr-eepg.so.2.4.0 util::GetChannelByID(tChannelID const&, bool) at util.c:37 Nov 13 14:17:08 timeshift vdr: [32370] /usr/local/lib/vdr/libvdr-eepg.so.2.4.0 util::cAddEventThread::Action() at util.c:213 Nov 13 14:17:08 timeshift vdr: [32370] /usr/local/bin/vdr cThread::StartThread(cThread*) calling ?? at ??:0 Nov 13 14:17:08 timeshift vdr: [32370] /lib/x86_64-linux-gnu/libpthread.so.0 at pthread_create.c:463 Nov 13 14:17:08 timeshift vdr: [32370] /lib/x86_64-linux-gnu/libc.so.6 clone at clone.S:97 Nov 13 14:17:08 timeshift vdr: [32370] --- end invalid lock sequence report Nov 13 14:17:08 timeshift vdr: [32370] --- THERE WILL BE NO FURTHER REPORTS UNTIL VDR IS RESTARTED! Nov 13 14:17:12 timeshift vdr: [32370] cAddEEPGEventThread thread ended (pid=30092, tid=32370) Nov 13 14:20:32 timeshift vdr: [32425] cAddEEPGEventThread thread started (pid=30092, tid=32425, prio=high)
-
Thanks seahawk1986. I have also tried this plugin but I do not understand how it is supposed to work. It states in the readme that:
What does this mean? I have looked in the eepg.equiv file:
Code
Alles anzeigen# Simply add a list of the channels in this file with the following format: # # <OriginalChannelId> <OtherChannelId> <ChannelName> # S13.0E-64511-6700-11517 S13.0E-318-13000-14601 BBC Prime S13.0E-318-5200-3401 S19.2E-1-1024-9015 Rai Uno S13.0E-318-5200-3401 S13.0E-318-12400-8511 Rai Uno S13.0E-318-5200-3402 S13.0E-318-12400-8512 Rai Due S13.0E-318-5200-3403 S13.0E-318-12400-8513 Rai Tre S13.0E-272-6000-3 T-272-905-143 Rete 4 S13.0E-272-6000-2 T-272-905-141 Canale 5 S13.0E-272-6000-1 T-272-905-142 Italia 1 S13.0E-64511-8600-11733 T-29-514-1 La 7 S13.0E-64511-6700-11504 S13.0E-318-200-13831 Eurosport
My channels.conf looks like this (example section):
CodeFOX HD;Canal Digital KTV:306000:C0M256:C:6952:1261=27:3347=eng@3:0:B00:1094:70:7:0 TV2 HD;Canal Digital KTV:338000:C0M256:C:6952:1247=27:3243=nor@3:6365:B00:6401:70:2:0 TV2 Zebra HD;Canal Digital KTV:298000:C0M256:C:6952:1291=27:3378=nor@3:0:B00:7065:70:6:0 TV2 Livsstil HD;Canal Digital KTV:338000:C0M256:C:6952:1069=27:3168=nor@3:0:B00:163:70:2:0 TV2 Humor HD;Canal Digital KTV:338000:C0M256:C:6952:1394=27:3418=nor@3:0:B00:153:70:2:0 TV2 Nyhetskanalen HD;Canal Digital KTV:418000:C0M256:C:6952:1395=27:3419=nor@3:0:B00:7148:70:15:0 TV2 Danmark HD;Canal Digital KTV:378000:C0M256:C:6952:1303=27:0;3299=dan@106:6368:B00:4068:70:11:0 TV2 Sport 2;Canal Digital KTV:418000:C0M256:C:6952:1277=27:3381=nor@3:0:B00:7018:70:15:0
How am I supposed to configure this plugin? It does not work by itself at least....
This is what is in my syslog:
Code
Alles anzeigenNov 13 13:02:13 timeshift vdr: [29648] Attached EEPG filter to device 0 Nov 13 13:02:13 timeshift vdr: [29648] Attached EEPG filter to device 1 Nov 13 13:02:13 timeshift vdr: [29648] Attached EEPG filter to device 2 Nov 13 13:02:13 timeshift vdr: [29648] Attached EEPG filter to device 3 Nov 13 13:02:22 timeshift vdr: [29653] EEPG: setstatus 0 Nov 13 13:02:22 timeshift vdr: [29653] EEPG: setstatus 1 Nov 13 13:02:22 timeshift vdr: [29653] EEPG: Filter Pid:0x0,Tid:0x0 added. Nov 13 13:02:25 timeshift vdr: [29653] EEPG: PMT scan idle Nov 13 13:02:25 timeshift vdr: [29653] EEPG: Ended all processing Nov 13 13:03:14 timeshift vdr: [29648] EEPG: setstatus 0 Nov 13 13:03:15 timeshift vdr: [29662] EEPG: setstatus 0 Nov 13 13:03:15 timeshift vdr: [29662] EEPG: setstatus 1 Nov 13 13:03:15 timeshift vdr: [29662] EEPG: Filter Pid:0x0,Tid:0x0 added.
-
-
Thanks that line is a log entry not a selectable option. I would expect there should be something below ---- epg source channels ---- in the first OSD screenshot. The XMLTV file contains the IDs but I cannot get my head around how I match it to the channels.conf.
-
Noone that can help me? I have tried everuthing to get EPG but still I get close to nothing. This is what I get; best case:
[Blockierte Grafik: https://preview.ibb.co/f4ha5A/Skjermbilde-2018-11-12-kl-06-54-37.png]
I have tried to install xmltv2vdr plugin but I cannot understand how to match channels to epg source.
What I have done is to download XMLTV from xmltv.se and I have it stored as norwegian_tv.xmltv in /var/lib/epgsources
Created a norwegian_tv file with the following information:
This gives me the plugin in the GUI with the source but how to I match the channel to the guide?
Not sure what to do. The WAF is all time low without EPG. I am open to all suggestions!
-
Just if anyone else is struggling to scan for channels in Norway (I am in Bærum) use the following scanning details:
DVB-C Legacy:
root@timeshift:/usr/share/dvb/dvb-legacy/dvb-c# cat no-Oslo-CanalDigital
C 354000000 6952000 NONE QAM64
C 362000000 6952000 NONE QAM64
C 370000000 6952000 NONE QAM64
C 378000000 6952000 NONE QAM64
C 386000000 6952000 NONE QAM64
C 394000000 6952000 NONE QAM64
C 402000000 6952000 NONE QAM64
C 410000000 6952000 NONE QAM64
C 418000000 6952000 NONE QAM64
C 426000000 6952000 NONE QAM64
C 450000000 6952000 NONE QAM64
C 474000000 6952000 NONE QAM64
root@timeshift:/usr/share/dvb/dvb-c# cat no-Oslo-CanalDigital
# no-oslo-CanalDigital (cable)
[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 354000000
SYMBOL_RATE = 6952000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO
[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 362000000
SYMBOL_RATE = 6952000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO
[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 370000000
SYMBOL_RATE = 6952000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO
[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 378000000
SYMBOL_RATE = 6952000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO
[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 386000000
SYMBOL_RATE = 6952000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO
[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 394000000
SYMBOL_RATE = 6952000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO
[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 402000000
SYMBOL_RATE = 6952000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO
[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 410000000
SYMBOL_RATE = 6952000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO
[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 418000000
SYMBOL_RATE = 6952000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO
[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 426000000
SYMBOL_RATE = 6952000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO
[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 450000000
SYMBOL_RATE = 6952000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO
[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 474000000
SYMBOL_RATE = 6952000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO
Basically symbolrate needs to be 6952 (not 6950) and QAM is 256. This should probably be updated by package maintainer or add a new file for Bærum. Not sure which
-
Hello, I am on Canal Digital Norway and have successfully installed VDR 2.4.0 on Linux Mint, added patches for my CAM to enable dual decrypt patches applied.
But for EPG I only get the current and next program for each channel. On TV Mosaic/DVBlink I get all channels for about a week. On MediaPortal I had to select that all EPG data was on FOX HD to get the same. I read somewhere that you need to have a "modern" EPG scraper that supports getting all EPG data from a central channel to get all data. How can I do this with VDR? I have tried to install some plugins and change the settings but any plugin and setting just gives the same result.
Anyone have any experience with EPG distributed from on channel? Is there a plugin? Any other solution? And this is DVB-C.
-
Thank you Helmut! you pushed me in the right direction!
I reinstalled VDR into /usr/local prefix and manually started VDR with the command
/bin/vdr --user=vdr -Pddci2 -Pvnsiserver
Plugin xinelibserver does not work for me, but I do not think I need it either. I can still configure VDR from Kodi. Went into the OSD and enabled the CAM tweaks, my conf file looks like this:
Code
Alles anzeigen# --- CaModule-Tweaks configfile (experimental) --- # CAM lines are added by VDR # Format [ (*) -> user configurable ]: # (*)Flags,(*)Limit,<AppManufacturer:ManufacturerCode,CamTitle> # # Flags (uint32) : OR'ed combination of: # CAMTWEAK_ENABLED 0x1 - enable/disable tweaks for this module # CAMTWEAK_FORCE_MCD 0x2 - force multi channel decryption (skip CA_PMT querying) # CAMTWEAK_AVOID_MTD 0x4 - not all CAMs will work with the MTD generated PIDs # # Limit (int) : the number of programs the CAM can decrypt simultaneously # : (applies only if CAMTWEAK_FORCE_MCD is set): # 0 -> no limit (for testing, up to VDR/CAM failure), 1 -> no MCD, 2...n -> a save CAM limit # # Example: 0x3,2,<... -> tweaks enabled, MCD forced, MTD allowed, CAM can deyrypt 2 programs # 0x3,5,<CAFE:BABE,Conax Conditional Access>
My CAM is supposed to be able to decrypt 8 concurrent streams but I have only 4 DVB cards so setting it to 5 is more than I need. And now it works! Jay!
When these patches gets into a release I can go back to the debian packages but for right now I just have to run VDR manually with a custom boot script.
-
Okay, some progress. I have GIT downloaded plugins to the PLUGINS/src folder and it works well for most plugins but I struggle with OSD.
When I start VDR I get the following message in the log:
Code
Alles anzeigenNov 10 14:49:07 timeshift systemd[1]: Starting Video Disk Recorder... Nov 10 14:49:07 timeshift vdr: [24810] VDR version 2.4.0 started Nov 10 14:49:07 timeshift vdr: [24810] switched to user 'vdr' Nov 10 14:49:07 timeshift vdr: [24810] codeset is 'UTF-8' - known Nov 10 14:49:07 timeshift vdr: [24810] found 28 locales in /usr/share/locale Nov 10 14:49:07 timeshift vdr: [24810] loading /var/lib/vdr/setup.conf Nov 10 14:49:07 timeshift vdr: [24810] loading /var/lib/vdr/sources.conf Nov 10 14:49:07 timeshift vdr: [24810] loading /var/lib/vdr/diseqc.conf Nov 10 14:49:07 timeshift vdr: [24810] loading /var/lib/vdr/scr.conf Nov 10 14:49:07 timeshift vdr: [24810] loading /var/lib/vdr/channels.conf Nov 10 14:49:07 timeshift vdr: [24810] loading /var/lib/vdr/timers.conf Nov 10 14:49:07 timeshift vdr: [24810] loading /var/lib/vdr/commands.conf Nov 10 14:49:07 timeshift vdr: [24810] loading /var/lib/vdr/reccmds.conf Nov 10 14:49:07 timeshift vdr: [24810] loading /var/lib/vdr/svdrphosts.conf Nov 10 14:49:07 timeshift vdr: [24810] loading /var/lib/vdr/keymacros.conf Nov 10 14:49:07 timeshift vdr: [24810] loading /var/lib/vdr/camresponses.conf Nov 10 14:49:07 timeshift vdr: [24810] loading /var/lib/vdr/camtweaks.conf Nov 10 14:49:07 timeshift vdr: [24810] registered source parameters for 'A - ATSC' Nov 10 14:49:07 timeshift vdr: [24810] registered source parameters for 'C - DVB-C' Nov 10 14:49:07 timeshift vdr: [24810] registered source parameters for 'S - DVB-S' Nov 10 14:49:07 timeshift vdr: [24810] registered source parameters for 'T - DVB-T' Nov 10 14:49:07 timeshift vdr: [24810] probing /dev/dvb/adapter0/frontend0 Nov 10 14:49:07 timeshift vdr: [24810] creating cDvbDevice Nov 10 14:49:07 timeshift vdr: [24810] new device number 1 Nov 10 14:49:07 timeshift vdr: [24810] DVB API version is 0x050A (VDR was built with 0x050A) Nov 10 14:49:07 timeshift vdr: [24810] frontend 0/0 provides DVB-C,DVB-T with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 ("ST STV0367 DDB DVB-C/T") Nov 10 14:49:07 timeshift vdr: [24811] video directory scanner thread started (pid=24810, tid=24811, prio=low) Nov 10 14:49:07 timeshift vdr: [24812] epg data reader thread started (pid=24810, tid=24812, prio=high) Nov 10 14:49:07 timeshift vdr: [24812] reading EPG data from /var/cache/vdr/epg.data Nov 10 14:49:07 timeshift vdr: [24814] frontend 0/0 tuner thread started (pid=24810, tid=24814, prio=high) Nov 10 14:49:07 timeshift vdr: [24814] cTimeMs: using monotonic clock (resolution is 1 ns) Nov 10 14:49:07 timeshift vdr: [24810] probing /dev/dvb/adapter1/frontend0 Nov 10 14:49:07 timeshift vdr: [24810] creating cDvbDevice Nov 10 14:49:07 timeshift vdr: [24810] new device number 2 Nov 10 14:49:07 timeshift vdr: [24810] frontend 1/0 provides DVB-C,DVB-T with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 ("ST STV0367 DDB DVB-C/T") Nov 10 14:49:07 timeshift vdr: [24815] device 1 section handler thread started (pid=24810, tid=24815, prio=low) Nov 10 14:49:07 timeshift vdr: [24811] video directory scanner thread ended (pid=24810, tid=24811) Nov 10 14:49:07 timeshift vdr: [24817] frontend 1/0 tuner thread started (pid=24810, tid=24817, prio=high) Nov 10 14:49:07 timeshift vdr: [24810] probing /dev/dvb/adapter2/frontend0 Nov 10 14:49:07 timeshift vdr: [24810] creating cDvbDevice Nov 10 14:49:07 timeshift vdr: [24818] device 2 section handler thread started (pid=24810, tid=24818, prio=low) Nov 10 14:49:07 timeshift vdr: [24810] new device number 3 Nov 10 14:49:07 timeshift vdr: [24810] frontend 2/0 provides DVB-C,DVB-T with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 ("ST STV0367 DDB DVB-C/T") Nov 10 14:49:07 timeshift vdr: [24820] frontend 2/0 tuner thread started (pid=24810, tid=24820, prio=high) Nov 10 14:49:07 timeshift vdr: [24810] probing /dev/dvb/adapter3/frontend0 Nov 10 14:49:07 timeshift vdr: [24821] device 3 section handler thread started (pid=24810, tid=24821, prio=low) Nov 10 14:49:07 timeshift vdr: [24810] creating cDvbDevice Nov 10 14:49:07 timeshift vdr: [24810] new device number 4 Nov 10 14:49:07 timeshift vdr: [24810] frontend 3/0 provides DVB-C,DVB-T with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 ("ST STV0367 DDB DVB-C/T") Nov 10 14:49:07 timeshift vdr: [24823] frontend 3/0 tuner thread started (pid=24810, tid=24823, prio=high) Nov 10 14:49:07 timeshift vdr: [24810] found 4 DVB devices Nov 10 14:49:07 timeshift vdr: [24810] setting primary device to 1 Nov 10 14:49:07 timeshift vdr: [24810] device 1 has no MPEG decoder Nov 10 14:49:07 timeshift vdr: [24810] assuming manual start of VDR Nov 10 14:49:07 timeshift vdr: [24810] setting current skin to "lcars" Nov 10 14:49:07 timeshift vdr: [24810] loading /var/lib/vdr/themes/lcars-default.theme Nov 10 14:49:07 timeshift vdr: [24810] loading /var/cache/vdr/cam.data Nov 10 14:49:07 timeshift vdr: [24824] device 4 section handler thread started (pid=24810, tid=24824, prio=low) Nov 10 14:49:07 timeshift vdr: [24812] epg data reader thread ended (pid=24810, tid=24812) Nov 10 14:49:07 timeshift vdr: [24810] switching to channel 1 C-70-5-1522 (DR Ramasjang) Nov 10 14:49:07 timeshift vdr: [24825] SVDRP server handler thread started (pid=24810, tid=24825, prio=low) Nov 10 14:49:07 timeshift vdr: [24825] SVDRP timeshift opening port 6419/tcp Nov 10 14:49:07 timeshift vdr: [24825] SVDRP timeshift listening on port 6419/tcp Nov 10 14:49:07 timeshift vdr: [24810] OSD size changed to 720x480 @ 1 Nov 10 14:49:07 timeshift vdr: [24810] ERROR: no OSD provider available - using dummy OSD! Nov 10 14:50:37 timeshift systemd[1]: vdr.service: Start operation timed out. Terminating. Nov 10 14:50:37 timeshift vdr: [24825] SVDRP server handler thread ended (pid=24810, tid=24825) Nov 10 14:50:37 timeshift vdr: [24810] saving /var/lib/vdr/camtweaks.conf Nov 10 14:50:38 timeshift vdr: [24810] saving /var/cache/vdr/cam.data Nov 10 14:50:38 timeshift vdr: [24810] saved setup to /var/lib/vdr/setup.conf Nov 10 14:50:38 timeshift vdr: [24815] device 1 section handler thread ended (pid=24810, tid=24815) Nov 10 14:50:38 timeshift vdr: [24814] frontend 0/0 tuner thread ended (pid=24810, tid=24814) Nov 10 14:50:38 timeshift vdr: [24818] device 2 section handler thread ended (pid=24810, tid=24818) Nov 10 14:50:38 timeshift vdr: [24817] frontend 1/0 tuner thread ended (pid=24810, tid=24817) Nov 10 14:50:38 timeshift vdr: [24821] device 3 section handler thread ended (pid=24810, tid=24821) Nov 10 14:50:38 timeshift vdr: [24820] frontend 2/0 tuner thread ended (pid=24810, tid=24820) Nov 10 14:50:38 timeshift vdr: [24824] device 4 section handler thread ended (pid=24810, tid=24824) Nov 10 14:50:38 timeshift vdr: [24823] frontend 3/0 tuner thread ended (pid=24810, tid=24823) Nov 10 14:50:38 timeshift vdr: [24810] caught signal 15 Nov 10 14:50:38 timeshift vdr: [24810] exiting, exit code 0 Nov 10 14:50:38 timeshift systemd[1]: vdr.service: Failed with result 'timeout'. Nov 10 14:50:38 timeshift systemd[1]: Failed to start Video Disk Recorder.
The patches seems to work cause I get the camtweaks.conf for instance. All the features in xineliboutput are enabled (checked with ./configure).
Still why do I get the "no OSD provider availabile". After this the start stalls and I get stuck....
These are the plugins in PLUGINS/src
ddci2 epgtableid0 hello osddemo pictures servicedemo skincurses status svdrpdemo vnsiserver xineliboutput
-
Thanks for the help so far but I am struggling to do this. I have been able to add the patches and compile but since I am on a debian system I thought perhaps that I could just change the prefix path in the Make.config to "/usr" but after I install I cannot get plugins to work. Maybe these must be recompiled as-well. Is there some easier way to make this work?
Code
Alles anzeigenNov 10 13:14:34 timeshift vdr[1636]: [1636] VDR version 2.4.0 started Nov 10 13:14:34 timeshift vdr[1636]: [1636] switched to user 'vdr' Nov 10 13:14:34 timeshift vdr[1636]: [1636] codeset is 'UTF-8' - known Nov 10 13:14:34 timeshift vdr[1636]: [1636] found 28 locales in /usr/share/locale Nov 10 13:14:34 timeshift vdr[1636]: [1636] loading plugin: /usr/lib/vdr/libvdr-vnsiserver.so.2.4.0 Nov 10 13:14:34 timeshift vdr[1636]: [1636] ERROR: /usr/lib/vdr/libvdr-vnsiserver.so.2.4.0: undefined symbol: _ZN10cDvbDevice13SetIdleDeviceEbb Nov 10 13:14:34 timeshift vdr[1636]: [1636] exiting, exit code 2 Nov 10 13:14:34 timeshift vdr[1636]: vdr: /usr/lib/vdr/libvdr-vnsiserver.so.2.4.0: undefined symbol: _ZN10cDvbDevice13SetIdleDeviceEbb Nov 10 13:14:34 timeshift systemd[1]: vdr.service: Main process exited, code=exited, status=2/INVALIDARGUMENT Nov 10 13:14:34 timeshift systemd[1]: vdr.service: Failed with result 'exit-code'. Nov 10 13:14:34 timeshift systemd[1]: Failed to start Video Disk Recorder. -- Subject: Unit vdr.service has failed -- Defined-By: systemd -- Support: http://www.ubuntu.com/support
-
Hello, I am trying this right now
Just a think I was wondering. In many other TV software you have to "bind" the channels to the tuner. Is such a thing needed in VDR? I cannot get my head around if this is needed.
Since I am on a debian system I will have to navigate the patching a bit carefully. Working on it.
-
Hello, I have now installed ubuntu 18.04 with yavdr experimental repository. VNSI, DDCI2 and VDR 2.4 works just fine. Still I get only 1 channel descrambled. Not sure how I can enable VDR to descramble two channels at the time.
I can install yavdr ansible to give it a whirl but the main problem is the MTD problem. Not able to find any documentation how I set this up either...
-
Hello, I am also considering VDR due to trouble getting MTD to work with my DigitalDevices CI CAM and TVHeadend. Only problem is that VDR is a bit complicated, especially when you install from scratch. I have tried with Mint 19 with some success. Got channels scanned and also installed ddci2 plugin and got channels descrambled. But I really would like something a bit more userfriendly. So my question is, should I install easyVDR or YaVDR rather than fiddle with Mint? I saw a youtube video on YaVDR with channel manager, that looked quite cool. But which VDR distribution do you reccommend? Keep in mind that I have only basic skills in German, so I need the UI and settings to be english...
Footnote; even if I got my Mascom Conax CAM to work I still havent managed to descramble two channels on two different tuners with my single CAM, even though it is supposed to work on VDR 2.4 with the DD CI and my CAM with ddci2. This is also something I need to overcome to finally transition from Windows (mediaportal/tvmosaic user today).