Hi everybody,
Are there users on this forum who are using or ever used wifi with AVG2 ?
If so please contact me here or via email.
Many thanks.
Hi everybody,
Are there users on this forum who are using or ever used wifi with AVG2 ?
If so please contact me here or via email.
Many thanks.
Hi everybody,
I would like to have some help on step by step procedure to use wifi in AVG2.
Thanks.
Hi cinfo,
I followed your instructions for connection to wireless network with negative results.
1 - Copy/paste into /etc/network/interfaces :
auto wlan0
iface wlan0 inet dhcp
wpa-ssid <your_router>
WPA-PSK <your_wpa_key>
2 -
sudo ifdown wlan0 && sudo ifup -v wlan0
3 - Disconnect ethernet cable
4 - sudo init 6
The result does not load :
Welcome BM2LTS ............
Ubuntu desktop is ok but there is no access via wifi or cable.
Thanks for your help.
Hi,
My isp does not support Linux only Windows , therefore can not help me with this issue .
I must change to a different provider for 4g as my isp has bad adsl and no fiber optics in my area.
Hi,
I copy/paste :
auto wlan0
iface wlan0 inet dhcp
wpa-ssid
WPA-PSK <your_wpa_key>
Into :
/etc /network /interfaces
How do i find the exact <your_router>
.............and what is this :
Be sure to select a static address outside the range used by the DHCP server in the router, switch or other access point.
What is the range of my static address ?
I have WPA2 not WPA , will AVG2 distinguish between them ?
Many thanks for your help.
Hi cinfo,
My /etc /network /interfaces looks like this :
ZitatAlles anzeigen# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
#
# WARNING: This file is auto-generated by the ReelBox setup, so you
# should not edit it manually. Use the setup menu instead.
#
# The loopback network interface
auto lo
iface lo inet loopback
address 127.0.0.1
netmask 255.0.0.0
auto eth0
iface eth0 inet manual
up ifconfig eth0 up
auto eth1
iface eth1 inet dhcp
auto eth2
iface eth2 inet dhcp
The file is telling me not to modify this script.
Should i go ahead and copy/paste your script ?
ZitatAlles anzeigenauto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet static
address 192.168.0.15
netmask 255.255.255.0
gateway 192.168.0.1
wpa-ssid <your_router>
WPA-PSK <your_wpa_key>
dns-nameservers 8.8.8.8 192.168.0.1
Where it says :
wpa-ssid <your_router>
Is there a way to find your exact router name ?
You included dhcp script :
auto wlan0
iface wlan0 inet dhcp
wpa-ssid <your_router>
WPA-PSK <your_wpa_key>
Which script do i use ?
Many thanks for this help.
Hi cinfo,
Reel OSD --> Setup --> Network --> Wireles LAN
--------------------------------------------------------------------
This is what i do and after selecting ( Wireless Lan ) a few moments pass and my network is found :
WPA2 Movistar_7652 -
I select this and dhcp failed ..........
I got my wpa2 code reset by my isp to default 12345678 but this is not working.
Do you unplug ethernet cable before you select ( wireless Lan ) ?
Many thanks for your help.
Hi,
Post #2 unfortunately tells me nothing .
Could you explain the procedure for connection to wifi.
I would be grateful for step-by.step guide.
AVG2 is not a normal pc and so i can not connect via ubuntu desktop .
Thanks again for your help.
Hi cinfo,
I am unable to locate the vdr remote .
Can you enable this wireless card with Ubuntu Desktop ?
Please excuse my severe ignorance.
Many thanks for help here.
Hi cinfo,
How can you check the wireless card and drivers ?
Do you do this with vdr remote or in ubuntu desktop ?
Many thanks for help .
Hi,
What is the procedure for wifi for AVG2 ?
I am not technical in this respect.
Method to connect :
- Remove internet cable.
- Install wifi antenna.
- Restart AVG2 .
No internet.
Thanks.
Hi,
Have been using cable for Internet for many years.
I would like to use wifi but this is not working for me....
Does anyone know how to connect AVG2 to use wifi ?
Many Thanks.
Hi ,
This board has only display ports .........!
No HDMI ports are on Kontron KTQ77.
Is there a difference in compatibility , speed between display port and hdmi port ?
How did you connect the power supply to netceiver ?
Regards.
Hi cinfo.
Still no eHD......
- sudo apt-get install linux-image-3.19.0-42-lowlatency
- sudo apt-get install build-essential linux-headers-3.19.0-42
- sudo update-grub
- sudo init 6
..........and activate eHD :
- sudo chmod 755 * or sudo chmod 755 *.*
- sudo depmod -a
- sudo init 6
Not working.......
Then the file from the Annex (file back in .ko * Rename) to /lib/modules/3.19.0-42-lowlatency/kernel/drivers/video copy ???
I copy/paste hdsm.ko of (v2.88).
I do not understand this ?
hdshm.ko.txt - why .txt ? you have to copy/paste only hdsm.ko to /lib/modules/3.19.0-42-lowlatency/kernel/drivers/video - ?
Regards.
Hi cinfo
Seasonal Greetings for the New Year 2016.
/lib/modules/3.16.0-33-generic/kernel/drivers/video
false
This was a typo , my mistake , i used kernel 3.19.0.42-lowlatency and eHD is not working.
Regards.
Hi,
BM2LTS v2.80 and v2.89, unable to install software .
Solution :
1 - install v2.80 / v2.89
2 - Copy/paste root user : usr/share/polkit-1 ( from v2.88 )
3 - sudo apt-get update
sudo apt-get dist-upgrade
sudo init 6
4 - Instal Nvidia Driver .
- Applications > Settings > Additional Drivers > 352.63
5 - sudo init 6
Kernel 3.19.0.42-lowlatency is working but not eHD ?
Restore eHD :
1 - Place the (hdshm.ko) in :
/lib/modules/3.16.0-33-generic/kernel/drivers/video
2 - Then open Terminal , enter :
sudo chmod 755 *
sudo depmod -a
sudo init 6
This did not work ?
Regards.
Hi cinfo,
BM2lts v2.80 is working as it loads the nouveau driver on install but not v2.89.
However, v2.80 is not good and difficult to work.
I changed language using Alt+F2 or Terminal/console :
Zitatenv LANGUAGE=en gnome-terminal
Then installed Synaptic via Ubuntu Software Center.
USB drives detected and copy/paste (apt and dpkg) from v2.88 to v2.80 .
I can now install packages but if i select :
Applications Menu > Settings > Additional Drivers = not working.
I hope this can be solved , for now v2.88 is stable.
Regards.
EDIT :Looking forward to knew image.
Hi cinfo,
The backup of apt and dkpg is a good idea but in v2.89 pen drive is not recognized .....i tryed before something else.
I will try again.
Regards.
Hi cinfo,
It seems this is a bug in ubuntu.
What i do not understand is why more users of bm2lts reporting this ?
Anyway, with post #71 nvidia installed on stable v2.80. ...........but you can not use Ubuntu Software Center.
Regards.
Hi cinfo,
Thank zou for zour suggestions , but thez do not work.
Still unable to use mz pc.
Mazbe this error message can help zou.
ZitatAlles anzeigenSie mussen sich legitimieren,um >/usr/lib/update-notifier/package-system-locked < mit Szstemverwalterrechten ausyufuhren
Eine Anwendung versucht eine Aktion ausyufuhren, die Privilegien erfordert. Eine Legitimation ist erforderlich, um diese Aktion auszufuhren.
Password:_____________________________________________
Details
Aktion: org.freedesktop.policzlit.exec
Anbieter: The PolicyKit Project
Regards.