Beiträge von jsffm

eben nochmal probiert, hier das Protokoll:

analogTV: 13:14:03 analogTV version 0.9.25 starting up ...
analogTV: 13:14:03 Detected VDR version 1.2.6
analogTV: 13:14:03 Detected ConfigDirectory()="/video/plugins"
analogTV: 13:14:03 CPU , family 6, model 6, stepping 5
analogTV: 13:14:03 CPU measured at 434.334MHz
analogTV: 13:14:03 Using MMX optimized memcpy()
analogTV: 13:14:03 Switching to channel 0 on device 0
analogTV: 13:14:03 Switching to channel 47 on device 0
housekeeping
analogTV: 13:14:46 Switching to channel 0 on device 0
analogTV: 13:14:46 Switching to channel 0 on device 4
analogTV: 13:14:46 Channel: ARD, SID=28106, 196250 MHz, PAL
analogTV: 13:14:46 Video device: /dev/video0
analogTV: 13:14:46 Video source: 9:
analogTV: 13:14:46 NEW videodev=/dev/video0
analogTV: 13:14:46 Detected V4L version 2
analogTV: 13:14:46 Detected capture device Vanilla iTVC15 card
analogTV: 13:14:46 This device have a onboard MPEG-Encoder
analogTV: 13:14:46 Detected Input#0: Composite 0
analogTV: 13:14:46 Detected Input#1: Composite 1
analogTV: 13:14:46 Detected Input#2: Composite 2
analogTV: 13:14:46 Detected Input#3: Composite 3
analogTV: 13:14:46 Detected Input#4: Tuner 0
analogTV: 13:14:46 Detected Input#5: Composite 4
analogTV: 13:14:46 Detected Input#6: S-Video 0
analogTV: 13:14:46 Detected Input#7: S-Video 1
analogTV: 13:14:46 Detected Input#8: S-Video 2
analogTV: 13:14:46 Detected Input#9: S-Video 3
analogTV: 13:14:46 NEW Frequency=196250 + 0
analogTV: 13:14:46 NEW videonorm=PAL
analogTV: 13:14:46 NEW videosource=9:S-Video 3
analogTV: 13:14:46 NEW picture properties
analogTV: 13:14:46 NEW PVR MPEG-Encoder parameter(s)
analogTV: 13:14:46 PVR Norm=0:PAL
analogTV: 13:14:46 PVR MPEG-PES, aspect=2, Videobitrate=4000000 (max=6000000)
analogTV: 13:14:46 PVR 12 frames/GOP, 3 B-frames, GOP open
analogTV: 13:14:46 PVR DNR:spatial and temporal (type=0, spatial=0, temporal=0)
analogTV: 13:14:46 PVR Audiobitrate=192 (Mask=0xa9)
analogTV: 13:14:46 PVR Picture size=352x576
analogTV: 13:14:46 PVR Input=9:S-Video 3
analogTV: 13:14:46 PVR Frequency=3140
analogTV: 13:14:49 PVR brightness=20 (58.8%) contrast=14 (41.2%) colour=16 (47.1%) hue=15 (44.1%)
analogTV: 13:14:49 PVR saa7115 brightness=150 contrast=53 colour=60 hue=-15
analogTV: 13:14:49 PVR Volume=59636
analogTV: 13:14:49 Switching to channel 4 on device 4
analogTV: 13:14:49 SetPid(Type=5, On=1, Pid=301), havePCR=1
analogTV: 13:14:49 SetPid(Type=6, On=1, Pid=300), havePCR=1
analogTV: 13:14:49 readPVR(Apid=300, Vpid=301)
analogTV: 13:14:49 flush_buffer()
analogTV: 13:14:49 Switching to channel 4 on device 0
analogTV: 13:14:49 cAnalogtvDevice::GetTSPacket() -- first call
analogTV: 13:15:13 read(22) failed, 5:Input/output error
analogTV: 13:15:23 Ringbuffer max usage: 0 byte (out of 2097152 byte) = 0.0%
analogTV: 13:15:23 Largest data packet from PVR-card was 0 byte long
analogTV: 13:15:23 0 PES frame(s), 0 TS frame(s) processed (total, incl. dropped)
analogTV: 13:15:23 0 byte PES, 0 byte TS (total, incl. dropped)
analogTV: 13:15:23 0 TS frame(s) dropped (ringbuffer was full)
analogTV: 13:15:23 0 PES frame(s) dropped
analogTV: 13:15:23 0 PES frame(s) dropped while not on a analogue channel
analogTV: 13:15:23 PVR reader failed! - retrying
analogTV: 13:15:23 read_buffer() no data available yet -- encoder is still starting up!
analogTV: 13:15:25 tune(3140) [frequency=196250, freqOffset=16, ofs=0]
analogTV: 13:15:25 readPVR(Apid=300, Vpid=301)
analogTV: 13:15:25 flush_buffer()
analogTV: 13:15:50 read(9) failed, 5:Input/output error
housekeeping
analogTV: 13:16:00 Ringbuffer max usage: 0 byte (out of 2097152 byte) = 0.0%
analogTV: 13:16:00 Largest data packet from PVR-card was 0 byte long
analogTV: 13:16:00 0 PES frame(s), 0 TS frame(s) processed (total, incl. dropped)
analogTV: 13:16:00 0 byte PES, 0 byte TS (total, incl. dropped)
analogTV: 13:16:00 0 TS frame(s) dropped (ringbuffer was full)
analogTV: 13:16:00 0 PES frame(s) dropped
analogTV: 13:16:00 0 PES frame(s) dropped while not on a analogue channel
analogTV: 13:16:00 PVR reader failed! - retrying
analogTV: 13:16:00 read_buffer() no data available yet -- encoder is still starting up!
analogTV: 13:16:02 tune(3140) [frequency=196250, freqOffset=16, ofs=0]
analogTV: 13:16:02 readPVR(Apid=300, Vpid=301)
analogTV: 13:16:02 flush_buffer()
analogTV: 13:16:03 SetPid(Type=5, On=0, Pid=301), havePCR=1
analogTV: 13:16:03 SetPid(Type=6, On=0, Pid=300), havePCR=1
analogTV: 13:16:05 read(9) failed, 5:Input/output error
analogTV: 13:16:06 Ringbuffer max usage: 0 byte (out of 2097152 byte) = 0.0%
analogTV: 13:16:06 Largest data packet from PVR-card was 0 byte long
analogTV: 13:16:06 0 PES frame(s), 0 TS frame(s) processed (total, incl. dropped)
analogTV: 13:16:06 0 byte PES, 0 byte TS (total, incl. dropped)
analogTV: 13:16:06 0 TS frame(s) dropped (ringbuffer was full)
analogTV: 13:16:06 0 PES frame(s) dropped
analogTV: 13:16:06 0 PES frame(s) dropped while not on a analogue channel
analogTV: 13:16:06 PVR reader failed! - retrying
analogTV: 13:16:06 tune(3140) [frequency=196250, freqOffset=16, ofs=0]
analogTV: 13:16:06 readPVR(Apid=300, Vpid=301)
analogTV: 13:16:06 flush_buffer()
analogTV: 13:16:06 Ringbuffer max usage: 0 byte (out of 2097152 byte) = 0.0%
analogTV: 13:16:06 Largest data packet from PVR-card was 0 byte long
analogTV: 13:16:06 0 PES frame(s), 0 TS frame(s) processed (total, incl. dropped)
analogTV: 13:16:06 0 byte PES, 0 byte TS (total, incl. dropped)
analogTV: 13:16:06 0 TS frame(s) dropped (ringbuffer was full)
analogTV: 13:16:06 0 PES frame(s) dropped
analogTV: 13:16:06 0 PES frame(s) dropped while not on a analogue channel
analogTV: 13:16:06 PVR reader stopped.
gentoo-mp VDR #

Jürgen

Zitat

Original von zulalp
Sieht so aus, als kann die Firmware für die PVR nicht geladen werden. Schau Dir mal ivtv/utils/ivtvfwextract.pl an.

Gruß, Jürgen

die zwei Firmware Dateien liegen dort, wo sie sein sollen:

gentoo-mp root # ls -l /lib/modules/
total 514
drwxr-xr-x 4 root root 416 Jan 1 19:39 2.4.20-gentoo-r8
drwxr-xr-x 4 root root 416 Dec 13 19:57 2.4.20-gentoo-r9
drwxr-xr-x 6 root root 464 Jan 7 18:43 2.4.23
-rw-r--r-- 1 root root 262144 Jan 7 00:52 ivtv-fw-dec.bin
-rw-r--r-- 1 root root 262144 Jan 7 00:52 ivtv-fw-enc.bin

Jürgen

Hallo,

ich kämpfe immer noch mit meiner PVR 250, die will nicht

im syslog kommt folgendes:

kernel: saa7115[0]: decoder set size
kernel: Hpsc: 0x00001, Hfsc: 0x00600
kernel: Setting full PAL height
kernel: msp34xx: scart switch: mute => 1
kernel: ivtv: 100 ms time out waiting for firmware
kernel: ivtv: api call 0x000000d2
kernel: ivtv: 100 ms time out waiting for firmware
kernel: ivtv: api call 0x000000d2
kernel: msp34xx: scart switch: in1 => 1

hat da jemand eine Idee?

MfG

Jürgen

Zitat

Original von neumann2k
Hallo,

du mußt die libdvb tools installieren. Voher aber bitte patchen. Schau Dir die REAME im analogtv plugin mal an und mache es genauso, wie es dort steht.

genau das war´s, jetzt bin ich ein Stück weiter

allerdings lies sich bei mir der patch nicht wie beschrieben einspielen, sondern nur im Directory mit -p1

MfG

Jürgen

Zitat

Original von neumann2k
Hallo,

du mußt die libdvb tools installieren. Voher aber bitte patchen. Schau Dir die REAME im analogtv plugin mal an und mache es genauso, wie es dort steht.

danke für die Antwort

kann durchaus sein, dass da Krumbel ist, ich habe auf meinem gentoo das einmal von gentoo und nochmal per Hand, ich werde das heute Abend mal bereinigen.

Hallo,

wenn ich analogtv starte, kommt die Meldung:

undefined symbol: pes_in_ts

hat sowas schon jemand gehabt?

Analog-Device PVR 250

MfG

Jürgen