Beiträge von miepel

Hallo
ich wollte das Thema noch mal hochholen da es ja jetzt Android auch für x86 er Prozessoren gibt wäre die Portierung vielleicht einfacher. Die Vorteile von Android sind ja auch das Google die Version 5 für Fernseher entwickelt hat also die Benutzung von netflix und co. einfacher wird und Android den Standbymodus besser beherscht als andere Betriebssysteme somit das Nervige booten weg fällt.

gruss

Zitat von fatzgenfatz

Hallo,

die Doku zu AndroVDR sagt:

mfG,
f.

Hallo zusammen

ich habe das ganze gemacht mit dem fernzugriff funktioniert einwand frei. Das Problem was ich noch habe ist bringt das mit dem kopieren des schlüssels überhaupt was. Weil wenn ich in der app das forwarding aktiviere fragt er die passphrase ab da kann ich aber auf abbrechen gehen und dann fragt er noch dass Root passwort ab. Also habe ich sicherheitstechnisch das gleiche wie vorher wer meinen dynDNS namen kennt und den port den ich frei geschaltet habe und das root passwort meines vdr´s kennt hat vollen zugriff. Das mit der Schlüsseldatei und der passphrase wird zwar abgefragt kann aber durch drücken des abrechen buttons einfach umgangen werden.
Kann ich das irgend wie ändern so das die eingabe der passphrase zwingent erforderlich ist?

mfG
Gerd

hallo seahawk1986

vielen dank es läuft jetzt wunderbar das Problem war das ich in der svdrphosts.conf die zweite Zeile wie unten anpassen mußte nebenbei läuft auch mein VDR -Zapper wieder das war dann wohl das gleiche Problem.

127.0.0.1 # always accept localhost
192.168.2.0/24 # any host on the local net
#204.152.189.113 # a specific host
#0.0.0.0/0 # any host on any net (USE THIS WITH CARE!)
#192.168.1.0/24 # local subnet

habe mir gerade die "vdrRemote live" im appstore gekauft leider kann ich keine verbindung mit meinem I Pod tough zum vdr aufbauen obwohl die eingebene IP Adresse vom vdr stimmt und SVDRP 2001 und SreamDev PORT 3000 sollte auch stimmen ich benutzte easyVDR 0.8.6.
Kann mir jemand helfen..

hallo tag

also du hast recht es fehlte das Leerzeichen vor --vout-filter

jetzt funktioniert es prima vielen Dank

Hallo Zusammen

bei mir funktioniert das script für den aufruf über den Zapper nicht es kommt die Fehlermeldung

Skript: c:\vlc-wrapper.js
Zeile: 17
Zeichen: 1
Fehler: Das System kann die angegebene Datei nicht finden

Code: 80070002
Quelle: WshShell.Exec

ruf mal deine E-mails ab

Zitat

Original von fireangel200111

Wie gesagt im Wohnzimmer habe ich eine Windows basierte VDR-Lösung mit einen 2,6 Ghz Proz. 1GB Speicher, 320 GB Festplatte und einer Skystar 2. Damit kann ich gleichzeitig surfen, brennen, fernseh schauen und Aufnehmen ohne jegliche Probleme und das alles vom gemütlich vom Sofa aus.

Gruß fireangel

Alles anzeigen

Was ist den eine Windows basierte VDR-Lösung?

naish1

Ich als jemand der nicht viel Ahnung von Linux hat kann dir nur zu einer FF-Karte und easyVDR raten ist einfach zu installieren und läuft Stabil.
Du kannst da glaube ich auch KDE nach installieren um im Internet zu surfen.
Die haben ein eigenes Forum wo du alle Informationen bekommst.

gruß miepel

brathaenchen
du brauchst eine full feature DVB-C TV Karte kriegst du im DVB-Shop ganz günstig http://www.dvbshop.net/index.php und als vdr distribution würde ich easy-vdr nehmen die haben ein eigenes Forum http://www.easy-vdr.de/forum/index.php und zum thema verschlüsselung habe ich dir eine e-mail geschrieben

wirbel
nicht immer den Oberschlauen raushängen lassen ich denkemal ich konnte im auch so ganz gut helfen.

OK vielen Dank für die Info.

Habe da mal eine andere Frage kann mein alter im sterben liegender Fernseher den TV- Out der TV-Karte beschädigt haben?
Ich beobachte zeitweise die selben Bildstörungen an anderen Geräten (GameCube, DVD-Player, Analoger Sat-Reciever) die ich an den Fernseher angeschlossen habe, kann aber noch nicht so ganz nachvollziehen unter welchen Bedingungen das passiert.
Ich frage nur weil ich mir eine neue TV-Karte bestellt habe und die nicht auch direkt zerstören will.
Ich warte noch auf das passende Angebot für einen neuen Fernseher.

mfG
Gerd

Zitat

Original von seaman
Hallo miepel,

zum Trost, du bist mit diesem Defekt nicht der erste ...
offensichtlich teil-defekte TV-Out Ausgänge am TI-DSP, dazu gibt es hier schon zahlreiche Anfragen und Vorschläge zur Abhilfe,
eine Rep. wird sich aufgrund des Preises nicht lohnen, bei dir würde ein AVBoard bzw. ähnliche Schaltungen (bspw. habichthugo) helfen,

gruß seaman

Also wen ich das richtig Verstanden habe könnte das AV-Board den defekten TV-Out ersetzen.

mfG Gerd

Hallo

Leider ist meine Siemens DVB-S FF-Karte defekt und zwar ist das Bild total dunkel und die farben sind zu grell.
Weiß jemand was da Kaputt sein könnte und wenn ja ob sich eine Reperatur lohnt?

mfG Gerd

Man muß als Nameserver nicht die Serveradresse seines Providers eingeben, die ist nämlich im Router hinterlegt, sondern es reicht dort auch die Adresse des Routers ein zu geben also die gleich wie auch für den Standardgateway.
Genauso Funktioniert das auch bei Windows nur das da der Nameserver DNS-Server heißt.

sh detect_x.sh für was steht das x weil eine Datei mit diesem namen gibt es nicht in dem Verzeichniss es gibt Dateien mit "Modules" oder "Net" oder "DVB" u.s.w. wenn ich die nehme kommen auch Meldungen über die entsprechenden Geräte aber bei x kommt nur eine Fehlermeldung: sh: detect_x.sh: No such file or directory bringt uns also bei der Grafikkarte nicht weiter.

Die folgenden Produkte werden von den aktuellen ForceWare Release 75-Treibern nicht unterstützt. Bitte verwenden Sie weiterhin die ForceWare Release 70-Treiber ...

TNT2
TNT2 Pro
TNT2 Ultra
TNT2 Model 64 (M64)
TNT2 Model 64 (M64) Pro

Na ja, vielleicht reicht die Kohle ja für was weniger uraltes...

Hab ich das jetzt richtig verstanden meine Graka wird nicht mehr unterstützt.

Ich hoffe das ist das richtige

Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: Linux 2.6.8 i686 [ELF]
Current Operating System: Linux vdr01 2.6.13-gentoo #10 Fri Oct 21 05:21:04 CEST 2005 i686
Build Date: 03 September 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 25 17:02:26 2006
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80003944, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:09:0: chip 1131,7146 card 13c2,100f rev 01 class 04,80,00 hdr 00
(II) PCI: 00:0d:0: chip 1131,7146 card 13c2,0000 rev 01 class 04,80,00 hdr 00
(II) PCI: 00:11:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 10de,002d card 1102,1024 rev 15 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0088 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe6000000 - 0xe7ffffff (0x2000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] rev 21, Mem @ 0xe4000000/24, 0xe6000000/25, BIOS @ 0xe5000000/16
List of video drivers:
atimisc
r128
radeon
tvia
mga
glint
nv
tga
s3
s3virge
sis
rendition
neomagic
i740
tdfx
savage
cirrus
vmware
tseng
trident
chips
apm
i128
nsc
ati
i810
ark
cyrix
siliconmotion
via
vesa
vga
dummy
fbdev
v4l
i810
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "r128"
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 4.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 4.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "tvia"
(II) Loading /usr/X11R6/lib/modules/drivers/tvia_drv.o
(II) Module Tvia: vendor="Tvia, Inc. (Formerly IGS Technologies, Inc.)"
compiled for 4.3.0, module version = 3.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mga"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "glint"
(II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o
(II) Module glint: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "tga"
(II) Loading /usr/X11R6/lib/modules/drivers/tga_drv.o
(II) Module tga: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "s3"
(II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o
(II) Module s3: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.3.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "s3virge"
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.8.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.7.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "rendition"
(II) Loading /usr/X11R6/lib/modules/drivers/rendition_drv.o
(II) Module rendition: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 4.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "neomagic"
(II) Loading /usr/X11R6/lib/modules/drivers/neomagic_drv.o
(II) Module neomagic: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "i740"
(II) Loading /usr/X11R6/lib/modules/drivers/i740_drv.o
(II) Module i740: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "tdfx"
(II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.o
(II) Module tdfx: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "savage"
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
(II) Module savage: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.1.27
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "cirrus"
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o
(II) Module cirrus: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "vmware"
(II) Loading /usr/X11R6/lib/modules/drivers/vmware_drv.o
(II) Module vmware: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 10.10.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "tseng"
(II) Loading /usr/X11R6/lib/modules/drivers/tseng_drv.o
(II) Module tseng: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "trident"
(II) Loading /usr/X11R6/lib/modules/drivers/trident_drv.o
(II) Module trident: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "chips"
(II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o
(II) Module chips: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "apm"
(II) Loading /usr/X11R6/lib/modules/drivers/apm_drv.o
(II) Module apm: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "i128"
(II) Loading /usr/X11R6/lib/modules/drivers/i128_drv.o
(II) Module i128: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "nsc"
(II) Loading /usr/X11R6/lib/modules/drivers/nsc_drv.o
(II) Module nsc: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 2.7.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "i810"
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "ark"
(II) Loading /usr/X11R6/lib/modules/drivers/ark_drv.o
(II) Module ark: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.5.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "cyrix"
(II) Loading /usr/X11R6/lib/modules/drivers/cyrix_drv.o
(II) Module cyrix: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "siliconmotion"
(II) Loading /usr/X11R6/lib/modules/drivers/siliconmotion_drv.o
(II) Module siliconmotion: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.3.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "via"
(II) Loading /usr/X11R6/lib/modules/drivers/via_drv.o
(II) Module via: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 4.1.30
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "vesa"
(II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.o
(II) Module vesa: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "vga"
(II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
(II) Module vga: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 4.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "dummy"
(II) Loading /usr/X11R6/lib/modules/drivers/dummy_drv.o
(II) Module dummy: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "fbdev"
(II) Loading /usr/X11R6/lib/modules/drivers/fbdev_drv.o
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.0.1
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "i810"
(II) Reloading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) UnloadModule: "i810"
(EE) Failed to load module "i810" (once-only module, 0)
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe8002000 - 0xe80020ff (0x100) MX[B]
[1] -1 0 0xe8001000 - 0xe80011ff (0x200) MX[B]
[2] -1 0 0xe8000000 - 0xe80001ff (0x200) MX[B]
[3] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[4] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[5] -1 0 0xe6000000 - 0xe7ffffff (0x2000000) MX[B](B)
[6] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[8] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[9] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe8002000 - 0xe80020ff (0x100) MX[B]
[1] -1 0 0xe8001000 - 0xe80011ff (0x200) MX[B]
[2] -1 0 0xe8000000 - 0xe80001ff (0x200) MX[B]
[3] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[4] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[5] -1 0 0xe6000000 - 0xe7ffffff (0x2000000) MX[B](B)
[6] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[8] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[9] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe8002000 - 0xe80020ff (0x100) MX[B]
[6] -1 0 0xe8001000 - 0xe80011ff (0x200) MX[B]
[7] -1 0 0xe8000000 - 0xe80001ff (0x200) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[10] -1 0 0xe6000000 - 0xe7ffffff (0x2000000) MX[B](B)
[11] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[15] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[16] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) Primary Device is: PCI 01:00:0
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
GeForce FX Go5200, GeForce FX Go5250, GeForce FX Go5200 32M/64M,
0x0329, Quadro NVS 280 PCI, Quadro FX 500, GeForce FX Go5300,
GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
GeForce FX 5900XT, GeForce FX 5950 Ultra, 0x0334, Quadro FX 3000,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, 0x0345, GeForce FX Go5700, GeForce FX Go5700,
0x0349, 0x034B, Quadro FX Go1000, Quadro FX 1100, 0x034F
(II) Loading sub module "cirrus_laguna"
(II) LoadModule: "cirrus_laguna"
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_laguna.o
(II) Module cirrus_laguna: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "cirrus_alpine"
(II) LoadModule: "cirrus_alpine"
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_alpine.o
(II) Module cirrus_alpine: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) ATI: Shared non-ATI VGA in PCI/AGP slot 1:0:0 detected.
(II) VESA: driver for VESA chipsets: vesa
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) v4l driver for Video4Linux
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Speedo/,/usr/share/fonts/Type1/,/usr/share/fonts/CID/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) Chipset RIVA TNT2 Model 64 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe8002000 - 0xe80020ff (0x100) MX[B]
[6] -1 0 0xe8001000 - 0xe80011ff (0x200) MX[B]
[7] -1 0 0xe8000000 - 0xe80001ff (0x200) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[10] -1 0 0xe6000000 - 0xe7ffffff (0x2000000) MX[B](B)
[11] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[15] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[16] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe8002000 - 0xe80020ff (0x100) MX[B]
[6] -1 0 0xe8001000 - 0xe80011ff (0x200) MX[B]
[7] -1 0 0xe8000000 - 0xe80001ff (0x200) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[10] -1 0 0xe6000000 - 0xe7ffffff (0x2000000) MX[B](B)
[11] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[18] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[19] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) NV(0): initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(II) NV(0): VESA BIOS detected
(II) NV(0): VESA VBE Version 3.0
(II) NV(0): VESA VBE Total Mem: 4096 kB
(II) NV(0): VESA VBE OEM: NVidia
(II) NV(0): VESA VBE OEM Software Rev: 2.5
(II) NV(0): VESA VBE OEM Vendor: NVidia
(II) NV(0): VESA VBE OEM Product: Riva TNT
(II) NV(0): VESA VBE OEM Product Rev: B1
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) NV(0): VESA VBE DDC supported
(II) NV(0): VESA VBE DDC Level none
(II) NV(0): VESA VBE DDC transfer in appr. 0 sec.
(II) NV(0): VESA VBE DDC read failed

Xorg detected your mouse at device /dev/mouse.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.

Your xorg.conf file is /root/xorg.conf.new

To test the server, run 'X -config /root/xorg.conf.new'

vielen Dank das hat funktioniert

KDE und Freevo wird nicht richtig dargestellt auf dem Monitor wahrscheinlich wird meine Graka nicht richtig erkannt
deshalb habe ich mal den log vom Bootvorgang aus der dmesg Datei hier.

Linux version 2.6.13-gentoo (root@vdr01) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #10 Fri Oct 21 05:21:04 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
383MB LOWMEM available.
On node 0 totalpages: 98288
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 94192 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ABIT ) @ 0x000f6e00
ACPI: RSDT (v001 AWARD AWRDACPI 0x30302e31 AWRD 0x00000000) @ 0x17ff3000
ACPI: FADT (v001 AWARD AWRDACPI 0x30302e31 AWRD 0x00000000) @ 0x17ff3040
ACPI: BOOT (v001 AWARD 0x00000000 0x00000000) @ 0x17ff4d80
ACPI: DSDT (v001 ABIT AWRDACPI 0x00001000 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 18000000 (gap: 18000000:e7ff0000)
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=2.6 ro root=302
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 501.217 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 384296k/393152k available (3273k kernel code, 8304k reserved, 1139k data, 152k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1002.84 BogoMIPS (lpj=501423)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: e4000000-e5ffffff
PREFETCH window: e6000000-e7ffffff
Simple Boot Flag at 0x34 set to 0x1
Machine check exception polling timer started.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFS: nTxBlock = 3003, nTxLock = 24028
SGI XFS with large block numbers, no debug enabled
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] Initialized drm 1.0.0 20040925
vesafb: NVidia, Riva TNT, B1 (OEM: NVidia)
vesafb: VBE version: 3.0
vesafb: protected mode interface info at c000:0383
vesafb: pmi: set display start = c00c03bc, set palette = c00c0432
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: hardware doesn't support DDC transfers
vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 100x37
vesafb: framebuffer at 0xe6000000, mapped to 0xd8a00000, using 4096k, total 4096k
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN0] (on)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
hda: ST330621A, ATA DISK drive
hdb: Memorex DVD-MAXX 1648 AJ, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ST3160023A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 58633344 sectors (30020 MB) w/1024KiB Cache, CHS=58168/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 < hda5 >
hdc: max request size: 1024KiB
hdc: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(33)
hdc: cache flushes supported
hdc: hdc1 hdc2 < hdc5 >
hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.12 loaded.
usbmon: debugfs is not available
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: Intel Corporation 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x0000e000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.9b (Thu Jul 28 12:20:13 2005 UTC).
ALSA device list:
No soundcards found.
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
USB0
ACPI: (supports S0 S1 S4 S4bios S5)
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 152k freed
kjournald starting. Commit interval 5 seconds
Adding 266104k swap on /dev/hda3. Priority:-1 extents:1
EXT3 FS on hda2, internal journal
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xd8e02000, 00:40:f4:71:0d:e3, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Linux video capture interface: v1.00
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
saa7146: found saa7146 @ mem d8ea2000 (revision 1, irq 10) (0x13c2,0x0000).
DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C).
adapter has MAC addr = 00:d0:5c:01:05:8a
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80fd2621
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: adac type set to 0 @ card 0
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0 (VLSI VES1x93 DVB-S)...
dvb-ttpci: found av7110-0.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
saa7146: found saa7146 @ mem d8eba000 (revision 1, irq 11) (0x13c2,0x100f).
DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI).
adapter has MAC addr = 00:d0:5c:23:c3:06
DVB: registering frontend 1 (ST STV0299 DVB-S)...
saa7146: register extension 'budget_av'.
usbcore: registered new driver ttusb
usbcore: registered new driver ttusb-dec
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
usbcore: registered new driver b2c2_flexcop_usb
usbcore: registered new driver cinergyT2
usbcore: registered new driver dvb_usb_vp7045
usbcore: registered new driver dvb_usb_dtt200u
usbcore: registered new driver dvb_usb_dibusb_mb
usbcore: registered new driver dvb_usb_dibusb_mc
usbcore: registered new driver dvb_usb_a800
usbcore: registered new driver dvb_usb_nova_t_usb2
usbcore: registered new driver dvb_usb_umt_010
usbcore: registered new driver dvb_usb_digitv
usbcore: registered new driver dvb_usb_cxusb
lirc_dev: IR Remote Control driver registered, at major 61
lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
lirc_serial: auto-detected active low receiver
lirc_dev: lirc_register_plugin: sample_rate: 0

Meine Graka ist Eine Creative 3D Riva TNT 2 M64

Hallo
Ich kann mit WinSCP keine Verbindung aufbauen.
Hab das Netzwerk mit Ping getestet das geht von beiden Seiten.
Als Host name: vdr01
User name: root
Password: gen2vdr
Müßte doch so stimmen was mach ich falsch.
Mit Linvdr funktioniert das bestens natürlich mit anderem host name und Passwort.
Die Firewall habe ich auch deaktiviert

Danke hat so funktioniert wie von dir vorgeschlagen jetzt werde ich mich mal ans Installieren machen.

Hallo

Habe unter Windows das mit dem Starten des Runterladens soweit hinbekommen aber leider nur mit ISDN.
Für größere Downloads gehe ich über Satelit by Call ins Internet ich muß im Firefox Browser Manuelle Proxy - Konfiguration aktivieren dann mit der Downstream über Satelit geht.
Und zwar muß ich eingeben HTTP-Proxy localhost 9202
und sockshost localhost 9203.
Wo muß ich was ändern das daß auch mit dem Download von Gn2vdr geht.

mfG
Gerd